| №- | Nazwa | I* | Numer części |
|---|---|---|---|
| 010 | PUMP | 001 | A 221 835 01 64 |
| 020 | HEXAGON NUT PUMP TO BRACKET M5 |
002 | N 910112 005000 |
| 050 | HOSE FEED,BETWEEN ENGINE AND RECIRCULATING PUMP |
001 | A 221 832 04 23 |
| 070 | BAND CLAMP 24.0/26.8 MM |
001 | A 230 995 01 05 |
| 070 | BAND CLAMP MOUNTING TO PUMP PRESSURE CONNECTION 24.0/26.8 MM |
001 | A 230 995 01 05 |
| 070 | HOSE CLAMP TO VALVE, TOP 27 MM |
001 | A 000 995 40 05 |
| 070 | BAND CLAMP T-PIECE TO PIPELINE 14/12 MM |
001 | A 140 995 04 05 |
| 070 | BAND CLAMP MOUNTING OF HOSE TO HEAT EXCHANGER 24.0/26.8 MM |
004 | A 230 995 01 05 |
| 070 | BAND CLAMP HOSE TO VALVE 24.0/26.8 MM |
002 | A 230 995 01 05 |
| 080 | FEED-THROUGH GROMMET AT RECIRCULATING PUMP |
001 | A 000 998 07 05 |
| 090 | HOSE FEED LINE TO CIRCULATION PUMP |
001 | A 221 832 16 23 |
| 090 | HOSE PUMP TO VALVE WITH T-TYPE DISTRIBUTOR |
001 | A 221 830 16 96 |
| 110 | WIRING HARNESS TO PUMP |
001 | A 221 540 44 06 |
| 120 | BRACKET RETURN LINE TO ENGINE |
001 | A 220 832 03 14 |
| 130 | BRACKET HOSE LINE |
001 | A 169 501 05 20 |
| 150 | PIPELINE TO WASHER FLUID HEATER |
001 | A 221 830 04 17 |
| 170 | VALVE CHANGE-OVER VALVE |
001 | A 230 830 00 84 |
| 180 | HOSE FROM VALVE TO HEAT EXCHANGER |
001 | A 221 832 21 94 |
| 190 | HOSE FROM VALVE TO HEAT EXCHANGER |
001 | A 221 832 22 94 |
| 200 | HOSE INTERMEDIATE PIECE TO VALVE |
001 | A 221 830 34 96 |
| 200 | HOSE INTERMEDIATE PIECE TO VALVE |
001 | A 221 830 31 96 |
| 220 | BRACKET HOSE LINE |
001 | A 163 501 02 20 |
| 250 | STOP PLUG BLIND PLUG |
001 | A 000 998 20 90 |
| 250 | FEED-THROUGH GROMMET PIPE LINE TO WHEELHOUSE |
001 | A 000 998 09 05 |
| 270 | BAND CLAMP T-PIECE JUNCTION TO WASHER FLUID HEATER 14/12 MM |
001 | A 140 995 04 05 |
| 270 | BAND CLAMP RETURN LINE INTERMEDIATE PIECE TO ENGINE 24.0/26.8 MM ALSO ORDER: 1X A 221 733 06 08 COVER INSTRUMENT PANEL ALSO HAS TO BE CHANGED. |
001 | A 230 995 01 05 |
| 270 | BAND CLAMP RETURN LINE INTERMEDIATE PIECE TO ENGINE 24.0/26.8 MM ALSO ORDER: 1X A 221 723 04 08 COVER THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. |
001 | A 230 995 01 05 |
| 270 | BAND CLAMP RETURN LINE INTERMEDIATE PIECE TO ENGINE 24.0/26.8 MM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 230 995 01 05 |
| 270 | SPRING HOSE CLAMP 29/34 MM |
001 | A 230 995 02 05 |
| 320 | PLUG FASTENER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 001 998 94 50 |
| 330 | FEED-THROUGH GROMMET RETURN LINE |
001 | A 000 998 08 05 |
| 340 | SCREWED INSERT RETURN LINE |
001 | A 003 990 02 51 |
| 350 | PIPELINE RETURN |
001 | A 221 830 57 15 |
| 360 | HOSE RETURN LINE INTERMEDIATE PIECE TO ENGINE |
001 | A 221 832 09 23 |
| 360 | RETURN HOSE RETURN OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH |
001 | A 221 832 31 23 |
| 365 | SPACER HOSE TO OIL DIPSTICK |
001 | A 000 995 71 75 |
| 900 | RECEPTACLE HOUSING CIRCULATION PUMP 2-PIN SLK2.8;M13 |
001 | A 168 545 29 28 |
| 901 | FEMALE CONTACT CIRCULATION PUMP 0.75-1.0 MM2 SLK2.8;M13 |
NB | A 009 545 81 26 |
| 901 | GASKET CIRCULATION PUMP 2.2-3.0 MM;M13 |
NB | A 000 545 76 80 |
| 903 | PIN BUSHING HOUSING AIR CONDITIONING WATER VALVE 2-PIN MQS;Y19/2 |
001 | A 210 540 20 81 |
| 904 | FEMALE CONTACT AIR CONDITIONING WATER VALVE 0.5-0.75 MM2 MQS;Y19/2 |
NB | A 008 545 63 26 |
| 905 | HOUSING RECIRCULATING PUMP PLUG CONNECTION 2-PIN MLK1.2;X73/2 |
001 | A 211 545 15 28 |
| 906 | CONTACT PIN RECIRCULATING PUMP PLUG CONNECTION 0.75-1.0 MM2 MLK1.2;X73/2 |
NB | A 047 545 99 28 |
| 906 | SINGLE-WIRE SEAL SINGLE-WIRE SEAL, CORN YELLOW 0.22-1.0 MM2;X73/2 |
NB | A 001 545 50 80 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy