| №- | Nazwa | I* | Numer części |
|---|---|---|---|
| 010 | FIXED CALIPER PARTS SET, LEFT |
001 | A 011 421 91 98 |
| 010 | FIXED CALIPER PARTS SET, RIGHT |
001 | A 011 421 92 98 |
| 010 | PISTON HOUSING LEFT PARTS KIT WITHOUT GUIDE SLEEVE |
001 | A 205 421 03 81 |
| 010 | PISTON HOUSING RIGHT PARTS KIT WITHOUT GUIDE SLEEVE |
001 | A 205 421 04 81 |
| 010 | PISTON HOUSING LEFT PARTS KIT WITHOUT GUIDE SLEEVE |
001 | A 205 421 03 81 |
| 010 | PISTON HOUSING RIGHT PARTS KIT WITHOUT GUIDE SLEEVE |
001 | A 205 421 04 81 |
| 010 | FIXED CALIPER PARTS SET, LEFT |
001 | A 011 421 97 98 |
| 010 | FIXED CALIPER PARTS SET, RIGHT |
001 | A 011 421 98 98 |
| 010 | FIXED CALIPER PARTS SET, LEFT |
001 | A 011 421 97 98 |
| 010 | FIXED CALIPER PARTS SET, RIGHT |
001 | A 011 421 98 98 |
| 020 | BLEEDER VALVE | 002 | A 000 421 46 65 |
| 020 | BLEEDER VALVE | 002 | A 000 421 43 65 |
| 020 | BLEEDER VALVE | 002 | A 000 421 43 65 |
| 020 | BLEEDER VALVE | 002 | A 000 421 46 65 |
| 020 | BLEEDER VALVE | 002 | A 000 421 46 65 |
| 030 | DUST PROTECTION CAP BLEEDER VALVE |
002 | A 000 421 30 48 |
| 030 | DUST PROTECTION CAP BLEEDER VALVE |
002 | A 000 421 36 48 |
| 030 | DUST PROTECTION CAP BLEEDER VALVE |
002 | A 000 421 36 48 |
| 030 | DUST PROTECTION CAP BLEEDER VALVE |
002 | A 000 421 30 48 |
| 030 | DUST PROTECTION CAP BLEEDER VALVE |
002 | A 000 421 30 48 |
| 035 | SPREADER SPRING | 002 | A 001 421 30 91 |
| 035 | SPREADER SPRING | 002 | A 001 421 30 91 |
| 035 | SPREADER SPRING | 002 | A 001 421 30 91 |
| 050 | DUST PROTECTION GAITOR PISTONS |
008 | A 001 421 39 86 |
| 050 | DUST PROTECTION GAITOR PISTONS |
008 | A 001 421 40 86 |
| 050 | DUST PROTECTION GAITOR PISTONS |
008 | A 001 421 40 86 |
| 055 | GUIDE PIN | 004 | A 000 421 72 74 |
| 055 | GUIDE PIN | 004 | A 000 421 72 74 |
| 055 | GUIDE PIN | 004 | A 000 421 72 74 |
| 060 | BRACKET LEFT WITH BOOT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
001 | A 205 421 05 94 |
| 060 | BRACKET RIGHT WITH BOOT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
001 | A 205 421 06 94 |
| 060 | BRACKET LEFT WITH BOOT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
001 | A 205 421 05 94 |
| 060 | BRACKET RIGHT WITH BOOT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
001 | A 205 421 06 94 |
| 070 | GUIDE SLEEVE CALIPER TO BRAKE ANCHOR |
002 | A 000 421 40 74 |
| 070 | GUIDE SLEEVE CALIPER TO BRAKE ANCHOR |
002 | A 000 421 40 74 |
| 075 | GUIDE PIN CALIPER TO BRAKE ANCHOR NO LONGER AVAILABLE; ORDER RANGE OF DELIVERY |
002 | A 000 421 69 74 |
| 075 | GUIDE PIN CALIPER TO BRAKE ANCHOR NO LONGER AVAILABLE; ORDER RANGE OF DELIVERY |
002 | A 000 421 69 74 |
| 080 | TS BELLOW PARTS KIT |
002 | A 001 421 43 86 |
| 080 | TS BELLOW PARTS KIT |
002 | A 001 421 43 86 |
| 130 | TS DISK BRAKE PAD PARTS KIT WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE |
001 | A 008 420 17 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE |
001 | A 008 420 38 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE |
001 | A 008 420 28 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE |
001 | A 008 420 18 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE Zastąpiono przez: A 000 420 67 00 |
001 | A 008 420 19 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE |
001 | A 000 420 67 00 |
| 140 | BOLT W FLANGE CALIPER TO BRAKE ANCHOR M8X22 |
004 | A 019 990 64 01 |
| 140 | BOLT W FLANGE CALIPER TO BRAKE ANCHOR M8X22 |
004 | A 019 990 64 01 |
| 170 | BOLT W FLANGE BRAKE CALIPER TO STEER. KNUCKLE, LEFT M14X1,5X45 |
002 | A 019 990 79 01 |
| 170 | BOLT W FLANGE BRAKE CALIPER TO STEER. KNUCKLE, RIGHT M14X1,5X45 |
002 | A 019 990 79 01 |
| 180 | BRAKE WEAR SENSOR BRAKE LINING WEAR INDICATOR |
001 | A 169 540 16 17 |
| 200 | BOND BRAKE DISC FRONT LEFT ONLY REPLACEABLE BY PAIRS LIGHT BRAKE DISC PATENTED IN CN/CZ/DE/ES/FR/GB/HU/IT/JP/PL/RU/SK/TR/US, PENDING IN BR/IN. BRAKE DISCS WITH HUB >2,5 MMMAY REQ UIRE SEPARATE HOMOLOGATION (MARKET SPECIFIC REGULATIONS) |
001 | A 000 421 26 12 |
| 200 | BOND BRAKE DISC FRONT RIGHT ONLY REPLACEABLE BY PAIRS LIGHT BRAKE DISC PATENTED IN CN/CZ/DE/ES/FR/GB/HU/IT/JP/PL/RU/SK/TR/US, PENDING IN BR/IN. BRAKE DISCS WITH HUB >2,5 MMMAY REQ UIRE SEPARATE HOMOLOGATION (MARKET SPECIFIC REGULATIONS) |
001 | A 000 421 26 12 |
| 200 | BOND BRAKE DISC FRONT LEFT ONLY REPLACEABLE BY PAIRS LIGHT BRAKE DISC PATENTED IN CN/CZ/DE/ES/FR/GB/HU/IT/JP/PL/RU/SK/TR/US, PENDING IN BR/IN. BRAKE DISCS WITH HUB >2,5 MMMAY REQ UIRE SEPARATE HOMOLOGATION (MARKET SPECIFIC REGULATIONS) |
001 | A 000 421 27 12 |
| 200 | BOND BRAKE DISC FRONT RIGHT ONLY REPLACEABLE BY PAIRS LIGHT BRAKE DISC PATENTED IN CN/CZ/DE/ES/FR/GB/HU/IT/JP/PL/RU/SK/TR/US, PENDING IN BR/IN. BRAKE DISCS WITH HUB >2,5 MMMAY REQ UIRE SEPARATE HOMOLOGATION (MARKET SPECIFIC REGULATIONS) |
001 | A 000 421 27 12 |
| 200 | BOND BRAKE DISC FRONT LEFT ONLY REPLACEABLE BY PAIRS LIGHT BRAKE DISC PATENTED IN CN/CZ/DE/ES/FR/GB/HU/IT/JP/PL/RU/SK/TR/US, PENDING IN BR/IN. BRAKE DISCS WITH HUB >2,5 MMMAY REQ UIRE SEPARATE HOMOLOGATION (MARKET SPECIFIC REGULATIONS) |
001 | A 000 421 27 12 |
| 200 | BOND BRAKE DISC FRONT RIGHT ONLY REPLACEABLE BY PAIRS LIGHT BRAKE DISC PATENTED IN CN/CZ/DE/ES/FR/GB/HU/IT/JP/PL/RU/SK/TR/US, PENDING IN BR/IN. BRAKE DISCS WITH HUB >2,5 MMMAY REQ UIRE SEPARATE HOMOLOGATION (MARKET SPECIFIC REGULATIONS) |
001 | A 000 421 27 12 |
| 200 | BOND BRAKE DISC FRONT LEFT ONLY REPLACEABLE BY PAIRS LIGHT BRAKE DISC PATENTED IN CN/CZ/DE/ES/FR/GB/HU/IT/JP/PL/RU/SK/TR/US, PENDING IN BR/IN. BRAKE DISCS WITH HUB >2,5 MMMAY REQ UIRE SEPARATE HOMOLOGATION (MARKET SPECIFIC REGULATIONS) |
001 | A 000 421 22 12 |
| 200 | BOND BRAKE DISC FRONT RIGHT ONLY REPLACEABLE BY PAIRS LIGHT BRAKE DISC PATENTED IN CN/CZ/DE/ES/FR/GB/HU/IT/JP/PL/RU/SK/TR/US, PENDING IN BR/IN. BRAKE DISCS WITH HUB >2,5 MMMAY REQ UIRE SEPARATE HOMOLOGATION (MARKET SPECIFIC REGULATIONS) |
001 | A 000 421 22 12 |
| 210 | FITTED BOLT BRAKE DISK AT WHEEL HUB, LEFT M8X12 |
001 | A 220 421 01 71 |
| 210 | FITTED BOLT BRAKE DISK AT WHEEL HUB, RIGHT M8X12 |
001 | A 220 421 01 71 |
| 250 | BRAKE DISC COVERING PANEL LEFT |
001 | A 000 421 35 20 |
| 250 | BRAKE DISC COVERING PANEL RIGHT |
001 | A 000 421 35 20 |
| 260 | HEXALOBULAR BOLT GUARD TO LEFT STEERING KNUCKLE M6X15 |
003 | N 000000 001114 |
| 260 | HEXALOBULAR BOLT GUARD TO RIGHT STEERING KNUCKLE M6X15 |
003 | N 000000 001114 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy