| №- | Nazwa | I* | Numer części |
|---|---|---|---|
| 010 | STEERING KNUCKLE FRONT LEFT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
001 | A 205 332 21 00 |
| 010 | STEERING KNUCKLE FRONT LEFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 205 332 35 00 |
| 010 | STEERING KNUCKLE FRONT RIGHT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
001 | A 205 332 22 00 |
| 010 | STEERING KNUCKLE FRONT RIGHT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 205 332 36 00 |
| 020 | WHEEL BEARING FRONT LEFT |
001 | A 205 334 04 00 |
| 020 | WHEEL BEARING FRONT RIGHT |
001 | A 205 334 04 00 |
| 030 | SCREW W RND. HEXAL. HEAD TO LEFT STEERING KNUCKLE, FRONT AXLE M12X57,5 |
002 | A 002 990 65 03 |
| 030 | SCREW W RND. HEXAL. HEAD TO RIGHT STEERING KNUCKLE, FRONT AXLE M12X57,5 |
002 | A 002 990 65 03 |
| 040 | SCREW W RND. HEXAL. HEAD TO LEFT STEERING KNUCKLE, FRONT AXLE M12X1,5X101 |
002 | A 002 990 64 03 |
| 040 | SCREW W RND. HEXAL. HEAD TO RIGHT STEERING KNUCKLE, FRONT AXLE M12X1,5X101 |
002 | A 002 990 64 03 |
| 100 | CONTROL ARM LEFT |
001 | A 205 330 55 01 |
| 100 | CONTROL ARM RIGHT |
001 | A 205 330 56 01 |
| 120 | HEXAGON HEAD BOLT TRANSVERSE CONTROL ARM TO BODY AT LEFT M10X90 IMPORTANT! NOTE MANUFACTURER OF REMOVED PART |
002 | N 910105 010044 |
| 120 | HEXAGON HEAD BOLT TRANSVERSE CONTROL ARM TO BODY AT LEFT M10X95 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
002 | N 000000 008308 |
| 120 | HEXAGON HEAD BOLT TRANSVERSE CONTROL ARM TO BODY AT RIGHT M10X90 IMPORTANT! NOTE MANUFACTURER OF REMOVED PART |
002 | N 910105 010044 |
| 120 | HEXAGON HEAD BOLT TRANSVERSE CONTROL ARM TO BODY AT RIGHT M10X95 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
002 | N 000000 008308 |
| 130 | NUT TRANSVERSE CONTROL ARM TO BODY AT LEFT M10 THE OLD PART MUST NO LONGER BE INSTALLED Zastąpiono przez: N 000000 008270 |
002 | N 000000 003275 |
| 130 | NUT TRANSVERSE CONTROL ARM TO BODY AT LEFT M10 |
002 | N 000000 008270 |
| 130 | NUT TRANSVERSE CONTROL ARM TO BODY AT RIGHT M10 THE OLD PART MUST NO LONGER BE INSTALLED Zastąpiono przez: N 000000 008270 |
002 | N 000000 003275 |
| 130 | NUT TRANSVERSE CONTROL ARM TO BODY AT RIGHT M10 |
002 | N 000000 008270 |
| 140 | NUT W FLANGE, BINDING CROSS MEMBER, TOP, AT STEERING KNUCKLE, LEFT M14X1,5 |
001 | A 002 990 68 54 |
| 140 | NUT W FLANGE, BINDING CROSS MEMBER, TOP, AT STEERING KNUCKLE, RIGHT M14X1,5 |
001 | A 002 990 68 54 |
| 200 | SPRING LINK LEFT |
001 | A 205 330 61 01 |
| 200 | SPRING LINK RIGHT |
001 | A 205 330 62 01 |
| 200 | SPRING LINK LEFT |
001 | A 205 330 63 01 |
| 200 | SPRING LINK RIGHT |
001 | A 205 330 64 01 |
| 210 | METAL BEARING ELEMENT LEFT EINSTELL LAGER |
001 | A 231 333 15 00 |
| 210 | METAL BEARING ELEMENT RIGHT EINSTELL LAGER |
001 | A 231 333 15 00 |
| 220 | HEXAGON HEAD BOLT SPRING CONTROL ARM TO INTEGRAL CARRIER, LEFT M14X1.5X120 |
001 | N 910105 014022 |
| 220 | HEXAGON HEAD BOLT SPRING CONTROL ARM TO INTEGRAL CARRIER, RIGHT M14X1.5X120 |
001 | N 910105 014022 |
| 230 | SPACER DISK SPRING CONTROL ARM TO INTEGRAL CARRIER, LEFT |
002 | A 220 333 00 76 |
| 230 | SPACER DISK SPRING CONTROL ARM TO INTEGRAL CARRIER, RIGHT |
002 | A 220 333 00 76 |
| 240 | HEXAGON NUT SPRING CONTROL ARM TO INTEGRAL CARRIER, LEFT M14X1,5 THE OLD PART MUST NO LONGER BE INSTALLED Zastąpiono przez: N 000000 008261 |
001 | N 000000 003281 |
| 240 | HEXAGON NUT SPRING CONTROL ARM TO INTEGRAL CARRIER, LEFT M14X1.5 |
001 | N 000000 008261 |
| 240 | HEXAGON NUT SPRING CONTROL ARM TO INTEGRAL CARRIER, RIGHT M14X1,5 THE OLD PART MUST NO LONGER BE INSTALLED Zastąpiono przez: N 000000 008261 |
001 | N 000000 003281 |
| 240 | HEXAGON NUT SPRING CONTROL ARM TO INTEGRAL CARRIER, RIGHT M14X1.5 |
001 | N 000000 008261 |
| 270 | NUT-A-WASHER ASSEMBLY SPRING CONTROL ARM TO STEERING KNUCKLE, LEFT M16X1,5 |
001 | A 005 990 24 50 |
| 270 | NUT-A-WASHER ASSEMBLY SPRING CONTROL ARM TO STEERING KNUCKLE, RIGHT M16X1,5 |
001 | A 005 990 24 50 |
| 300 | STRUT ROD LEFT ALSO ORDER: TERMINAL BLOCK 2 X A 001 546 99 41; CABLE TIE 5 X A 002 997 24 90 PAINT PART IN IRIDIUM SILVER 9982 |
001 | A 205 330 13 05 |
| 300 | STRUT ROD RIGHT PAINT PART IN IRIDIUM SILVER 9982 |
001 | A 205 330 14 05 |
| 300 | STRUT ROD LEFT |
001 | A 205 330 15 05 |
| 300 | STRUT ROD RIGHT |
001 | A 205 330 16 05 |
| 300 | STRUT ROD LEFT |
001 | A 205 330 15 05 |
| 300 | STRUT ROD RIGHT |
001 | A 205 330 16 05 |
| 310 | METAL BEARING ELEMENT LEFT MUST BE PAINTED IN 9040 (BLACK) PRIOR TO INSTALLATION |
001 | A 205 333 23 00 |
| 310 | METAL BEARING ELEMENT LEFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 205 333 24 00 |
| 310 | METAL BEARING ELEMENT RIGHT MUST BE PAINTED IN 9040 (BLACK) PRIOR TO INSTALLATION |
001 | A 205 333 23 00 |
| 310 | METAL BEARING ELEMENT RIGHT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 205 333 24 00 |
| 320 | HEXAGON HEAD BOLT TORQUE STRUT TO INTEGRAL CARRIER, LEFT M14X1.5X120 |
001 | N 910105 014022 |
| 320 | HEXAGON HEAD BOLT TORQUE STRUT TO INTEGRAL CARRIER, RIGHT M14X1.5X120 |
001 | N 910105 014022 |
| 330 | SPACER DISK TORQUE STRUT TO INTEGRAL CARRIER, LEFT |
002 | A 220 333 00 76 |
| 330 | SPACER DISK TORQUE STRUT TO INTEGRAL CARRIER, RIGHT |
002 | A 220 333 00 76 |
| 340 | HEXAGON NUT TORQUE STRUT TO INTEGRAL CARRIER, LEFT M14X1,5 THE OLD PART MUST NO LONGER BE INSTALLED Zastąpiono przez: N 000000 008261 |
001 | N 000000 003281 |
| 340 | HEXAGON NUT TORQUE STRUT TO INTEGRAL CARRIER, LEFT M14X1.5 |
001 | N 000000 008261 |
| 340 | HEXAGON NUT TORQUE STRUT TO INTEGRAL CARRIER, RIGHT M14X1,5 THE OLD PART MUST NO LONGER BE INSTALLED Zastąpiono przez: N 000000 008261 |
001 | N 000000 003281 |
| 340 | HEXAGON NUT TORQUE STRUT TO INTEGRAL CARRIER, RIGHT M14X1.5 |
001 | N 000000 008261 |
| 370 | NUT-A-WASHER ASSEMBLY TORQUE STRUT AT STEERING KNUCKLE, LEFT M16X1,5 |
001 | A 005 990 24 50 |
| 370 | NUT-A-WASHER ASSEMBLY TORQUE STRUT AT STEERING KNUCKLE, RIGHT M16X1,5 |
001 | A 005 990 24 50 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy