| №- | Nazwa | I* | Numer części |
|---|---|---|---|
| 010 | FUEL TANK DIESEL VEHICLES Zastąpiono przez: A 221 470 56 01 |
001 | A 221 470 17 01 |
| 010 | FUEL TANK DIESEL VEHICLES Zastąpiono przez: A 221 470 84 01 |
001 | A 221 470 56 01 |
| 010 | FUEL TANK DIESEL VEHICLES |
001 | A 221 470 84 01 |
| 020 | RING FUEL FILTER TO TANK |
002 | A 211 471 01 10 |
| 030 | SEAL RING EXPANSION PLUG |
002 | A 001 997 71 41 |
| 040 | MULTIPLE NUT EXPANSION PLUG M6 |
006 | A 001 990 65 50 |
| 050 | COVER FUEL TANK Zastąpiono przez: A 204 470 04 38 |
001 | A 204 470 02 38 |
| 050 | CLOSING COVER FUEL TANK |
001 | A 204 470 04 38 |
| 080 | FUEL PUMP FUEL TANK FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 221 470 20 94 |
| 100 | CAP WITH INDEPENDENT HEATER CONNECTION FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 221 470 08 41 |
| 100 | CAP WITH INDEPENDENT HEATER CONNECTION ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS |
001 | A 221 470 09 41 |
| 105 | CAP WITH INDEPENDENT HEATER CONNECTION |
001 | A 221 470 00 41 |
| 110 | SUCTION LINE INDEPENDENT HEATING |
001 | A 221 471 00 18 |
| 120 | COVER RING EXPANSION PLUG |
002 | A 171 471 01 10 |
| 300 | COCK FUEL DISCHARGE |
001 | A 221 476 01 90 |
| 400 | SENDER UNIT FUEL SUPPLY, RIGHT |
001 | A 221 542 00 17 |
| 410 | FUEL GAUGE TRANSMITTER FUEL SUPPLY, LEFT |
001 | A 221 540 15 17 |
| 420 | PRESSURE SENSOR TANK |
001 | A 163 542 28 18 |
| 450 | HOSE FILLER NECK TO FUEL TANK 25X4 MM;133 MM ORDER BY THE METER |
NB | A 000 476 91 26 |
| 460 | HOSE CLAMP FILLER NECK TO FUEL TANK 25 MM |
002 | A 006 997 46 90 |
| 500 | SCREENING PLATE FUEL TANK |
001 | A 221 471 02 87 |
| 510 | CLIP ATTACHMENT SHIELD |
004 | A 000 994 96 45 |
| 550 | DAMPING STRIP TO FUEL TANK 40X40X4 MM |
006 | A 221 476 01 84 |
| 560 | RUBBER SLEEVE TO FUEL TANK |
001 | A 000 987 17 43 |
| 570 | PROFILE SEAL BETWEEN TANK AND BODY |
001 | A 221 473 01 80 |
| 580 | CUP SEAL BETWEEN TANK AND BODY |
001 | A 221 471 01 79 |
| 600 | RING TO TANK FILLER NECK |
001 | A 220 471 00 71 |
| 620 | FUEL FILLER CAP ALSO ORDER: A 221 830 17 61 HEAT MAT IN THE SUPPORT |
001 | A 221 470 01 05 |
| 620 | FILLER CAP HEAT MAT IN LINER |
001 | A 221 470 09 05 |
| 630 | SEAL RING FILLER CAP Zastąpiono przez: A 000 476 00 00 |
001 | A 168 471 04 79 |
| 630 | PROFILE SEAL FILLER CAP |
001 | A 000 476 00 00 |
| 640 | EXPANSION RIVET TANK LOCK FASTENING 5.2 MM |
001 | A 001 990 23 92 |
| 700 | BOLT TANK ATTACHMENT |
004 | A 000 990 59 03 |
| 710 | BUSHING TANK ATTACHMENT |
004 | A 000 992 23 03 |
| 720 | RUBBER SLEEVE TANK ATTACHMENT |
001 | A 000 987 22 43 |
| 730 | WASHER TANK ATTACHMENT |
001 | A 460 990 19 40 |
| 740 | HEXAGON NUT TANK ATTACHMENT M8 |
001 | N 910113 008000 |
| 750 | INTERMEDIATE LAYER MOUNTING, WIRING HARNESS TO FUEL PUMP 40 X 25 X 2 MM |
001 | A 123 758 04 97 |
| 900 | CLUTCH FUEL PUMP 7-PIN SLK2.8, MLK1.2;M3/3 |
001 | A 171 545 01 28 |
| 901 | CRIMP RECEPTACLE CONTACT FUEL PUMP 0.22-0.35 MM2 MLK1.2S;M3/3 |
NB | A 000 982 28 26 |
| 901 | FEMALE CONTACT FUEL PUMP 0.75-1.0 MM2 SLK2.8;M3/3 |
NB | A 009 545 81 26 |
| 901 | FEMALE CONTACT FUEL PUMP 2.5-4.0 MM2 SLK2.8;M3/3 |
NB | A 011 545 06 26 |
| 901 | GASKET FUEL PUMP 2.2-3.0 MM;M3/3 |
NB | A 000 545 76 80 |
| 901 | SINGLE-WIRE SEAL FUEL PUMP 0.22-1.0 MM2;M3/3 |
NB | A 001 545 50 80 |
| 901 | GASKET BLIND PLUG, GREEN 5.2 MM;M3/3 |
NB | A 000 545 78 80 |
| 902 | PIN BUSHING HOUSING PRESSURE SENDING UNIT, TANK 3-PIN MINI MIC;B4/3 |
001 | A 013 545 19 26 |
| 903 | SOCKET PRESSURE SENDING UNIT, TANK 0.75-1.5 MM2 MINI MIC;B4/3 |
NB | A 016 545 00 26 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy