| №- | Nazwa | I* | Numer części |
|---|---|---|---|
| 020 | CONTROL UNIT NIGHT VISION SYSTEM ALSO TO BE ORDERED: RETAINING SCREW M12X1......... PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 221 900 21 02 |
001 | A 221 900 20 02 |
| 020 | CONTROL UNIT NIGHT VISION SYSTEM CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== ALSO TO BE ORDERED: RETAINING SCREW M12X1......... PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 221 900 25 03 |
001 | A 221 900 21 02 |
| 020 | CONTROL UNIT NIGHT VISION SYSTEM PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 221 900 18 04 |
001 | A 221 900 25 03 |
| 020 | CONTROL UNIT NIGHT VISION SYSTEM PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 18 04 |
| 050 | HEXAGON NUT W COLLAR CONTROL UNIT FIXTURE 5 MM |
003 | A 210 990 01 50 |
| 100 | WIRING HARNESS CONTROL UNIT TO INSTRUMENT CLUSTER |
001 | A 221 440 53 07 |
| 110 | WIRING HARNESS NIGHT VISION SYSTEM |
001 | A 221 440 51 33 |
| 110 | WIRING HARNESS NIGHT VISION SYSTEM |
001 | A 221 440 78 07 |
| 110 | WIRING HARNESS MULTI-PURPOSE CAMERA |
001 | A 221 440 20 10 |
| 110 | ELECTRICAL WIRING HARNESS NIGHT VISION SYSTEM |
001 | A 221 440 76 36 |
| 110 | ELECTRICAL WIRING HARNESS MULTI-PURPOSE CAMERA THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. |
001 | A 221 440 74 36 |
| 120 | WIRING HARNESS CAMERA |
001 | A 221 440 52 33 |
| 150 | CLAMP WIRING HARNESS, NIGHT VIEW CAMERA 6.5X12.8 MM |
001 | A 000 995 60 44 |
| 150 | CLAMP WIRING HARNESS, NIGHT VIEW CAMERA 6.5X14.5 MM THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. |
001 | A 000 995 61 44 |
| 900 | FEMALE CONNECTOR, ELETR. NIGHT VIEW ASSIST CONTROL UNIT 6-PIN MQS;N101 |
001 | A 038 545 71 28 |
| 901 | FEMALE CONTACT NIGHT VIEW ASSIST CONTROL UNIT 0.25-0.5 MM2 MQS;N101 |
NB | A 016 545 41 26 |
| 905 | PLUG CAN BUS NODE PLUG-IN CONNECTOR 2-PIN MQS;X30/28 |
001 | A 049 545 87 28 |
| 906 | FEMALE CONTACT CAN BUS NODE PLUG-IN CONNECTOR 0.25-0.5 MM2 MQS;X30/28 |
NB | A 016 545 41 26 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy