| №- | Nazwa | I* | Numer części |
|---|---|---|---|
| 010 | HYDRAULIC UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== Zastąpiono przez: A 009 431 22 12 |
001 | A 009 431 53 12 |
| 010 | HYDRAULIC UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== Zastąpiono przez: A 009 431 65 12 |
001 | A 009 431 22 12 |
| 010 | HYDRAULIC UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Zastąpiono przez: A 009 431 41 12 |
001 | A 009 431 65 12 |
| 010 | HYDRAULIC UNIT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Zastąpiono przez: A 009 431 47 12 |
001 | A 009 431 41 12 |
| 010 | HYDRAULIC UNIT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. ADAPT WIRING HARNESS FOR ASSEMBLY INVESTIGATION DOCUMENTARY EVIDENCE MUST BE FURNISHED AT ANY GIVEN TIME. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 000 431 22 00 |
001 | A 009 431 47 12 |
| 010 | HYDRAULIC UNIT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. WITH DAS4, USE XENTRY DIAGNOSTICS FOR PROGRAMMING THE DAS4 ADDITIONAL/REPLACEMENT KEY BY SELECTING "PROGRAM AND TEACH IN ADDIT IONAL KEY " OR " PROGRAM AND TEACH IN REPLACEMENT KEY". THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. CAUTION! WHEN ORDERING AUXILIARY KEY ES-2 MUST BE QUOTED READ OUT DATA FROM VEHICLE. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 000 431 38 00 |
001 | A 000 431 22 00 |
| 010 | HYDRAULIC UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 000 431 38 00 |
| 010 | HYDRAULIC UNIT WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" Zastąpiono przez: A 009 431 24 12 |
001 | A 009 431 55 12 |
| 010 | HYDRAULIC UNIT WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" Zastąpiono przez: A 009 431 67 12 |
001 | A 009 431 24 12 |
| 010 | HYDRAULIC UNIT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" Zastąpiono przez: A 009 431 42 12 |
001 | A 009 431 67 12 |
| 010 | HYDRAULIC UNIT ADAPT WIRING HARNESS FOR ASSEMBLY INVESTIGATION DOCUMENTARY EVIDENCE MUST BE FURNISHED AT ANY GIVEN TIME. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 009 431 48 12 |
001 | A 009 431 42 12 |
| 010 | HYDRAULIC UNIT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. ADAPT WIRING HARNESS FOR ASSEMBLY INVESTIGATION DOCUMENTARY EVIDENCE MUST BE FURNISHED AT ANY GIVEN TIME. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 000 431 25 00 |
001 | A 009 431 48 12 |
| 010 | HYDRAULIC UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 000 431 25 00 |
| 010 | HYDRAULIC UNIT Zastąpiono przez: A 176 431 17 12 |
001 | A 176 431 13 12 |
| 010 | HYDRAULIC UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 176 431 17 12 |
| 010 | HYDRAULIC UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 431 03 00 |
| 010 | HYDRAULIC UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 431 05 00 |
| 010 | HYDRAULIC UNIT Zastąpiono przez: A 176 431 19 12 |
001 | A 176 431 15 12 |
| 010 | HYDRAULIC UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 431 19 12 |
| 010 | HYDRAULIC UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 431 03 00 |
| 010 | HYDRAULIC UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 431 07 00 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 246 900 11 13 |
001 | A 246 900 77 11 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 246 900 11 13 |
| 020 | RS CONTROL UNIT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. WITH DAS4, USE XENTRY DIAGNOSTICS FOR PROGRAMMING THE DAS4 ADDITIONAL/REPLACEMENT KEY BY SELECTING "PROGRAM AND TEACH IN ADDIT IONAL KEY " OR " PROGRAM AND TEACH IN REPLACEMENT KEY". THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. CAUTION! WHEN ORDERING AUXILIARY KEY ES-2 MUST BE QUOTED READ OUT DATA FROM VEHICLE. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 246 900 11 13 |
001 | A 246 900 81 11 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 246 900 11 13 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 246 900 12 13 |
001 | A 246 900 78 11 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 246 900 12 13 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 246 900 82 11 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 176 900 71 02 |
001 | A 176 900 48 02 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 900 71 02 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 900 18 03 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 900 63 03 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Zastąpiono przez: A 176 900 73 02 |
001 | A 176 900 50 02 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 900 73 02 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 900 18 03 |
| 020 | RS CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 176 900 65 03 |
| 100 | NUT BRACKET TO BODY M6 |
003 | N 000000 003477 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy