| №- | Name | A* | Part number |
|---|---|---|---|
| 300 | PROPELLER SHAFT Replaced by: A 674 410 19 04 |
- | A 674 410 00 04 |
| 300 | PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING 1064 MM VALID FOR SPECIAL VEHICLES ONLY 20/60 FROM IDENT-NO. 5 202934 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 674 410 19 04 |
| 300 | PROPELLER SHAFT ALL VEHICLES WITH INTERCOOLED ENGINES |
001 | A 674 410 03 04 |
| 315 | DRIVE FLANGE | 001 | A 381 411 08 11 |
| 318 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31 |
- | A 617 410 00 31 |
| 318 | UNIVERSAL JOINT CROSS WITH BUSHINGS VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) 20/60 UP TO IDNET-NO. 5 202933 |
001 | A 000 410 40 31 |
| 321 | GREASE NIPPLE | 001 | N 071412 008302 |
| 324 | RETAINING RING AS REQUIRED 1.750 MM |
004 | N 000472 042001 |
| 324 | LOCK AS REQUIRED 1.875 MM |
004 | A 005 994 99 41 |
| 324 | LOCK AS REQUIRED 2.000 MM |
004 | A 006 994 04 41 |
| 336 | PROTECTIVE CAP VALID FOR V-ENGINES WITH INTERCOOLER ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
001 | A 381 413 02 61 |
| 336 | PROTECTIVE CAP VALID FOR VEHICLES WITH IN-LINE ENGINE FICHTEL & SACHS NO.25 1700 112 024, FROM IDENT NO. 5 344429 ALSO EXCHANGEABLE INDIVIDUALLY ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH BEARINGBRACKET INTERMEDIATE LEVER MOUNTED ON CAB PIVOT BEARING |
001 | A 381 413 04 61 |
| 339 | SCREW Replaced by: A 352 990 47 01 |
- | A 352 990 04 01 |
| 339 | SCREW Replaced by: A 007 990 10 01 |
- | A 352 990 47 01 |
| 339 | SCREW PROPELLER SHAFT TO TRANSMISSION |
008 | A 007 990 10 01 |
| 342 | SPRING LOCK WASHER PROPELLER SHAFT |
008 | N 912004 010102 |
| 345 | NUT PROPELLER SHAFT |
008 | N 000934 010010 |
| 400 | INTERMEDIATE BEARING Replaced by: A 381 410 12 22 |
- | A 381 410 02 22 |
| 400 | INTERMEDIATE BEARING VALID FOR V-ENGINES WITH INTERCOOLER ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB Replaced by: A 381 410 15 22 |
- | A 381 410 12 22 |
| 400 | INTERMEDIATE BEARING PROPELLER SHAFT VALID FOR VEHICLES WITH IN-LINE ENGINE FICHTEL & SACHS NO.25 1700 112 024, FROM IDENT NO. 5 344429 ALSO EXCHANGEABLE INDIVIDUALLY ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH BEARINGBRACKET INTERMEDIATE LEVER MOUNTED ON CAB PIVOT BEARING |
001 | A 381 410 15 22 |
| 403 | BALL BEARING VALID FOR V-ENGINES WITH INTERCOOLER ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
001 | A 001 981 86 25 |
| 406 | LOCK VALID FOR V-ENGINES WITH INTERCOOLER ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
002 | A 001 994 81 41 |
| 409 | PROTECTIVE CAP VALID FOR V-ENGINES WITH INTERCOOLER ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
002 | A 381 413 01 61 |
| 412 | CENTERING FLANGE Replaced by: A 381 411 01 45 |
- | A 381 410 01 30 |
| 412 | FLANGE PROPELLER SHAFT BEARING |
001 | A 381 411 01 45 |
| 415 | PROTECTIVE CAP FOLLOWER FLANGE VALID FOR V-ENGINES WITH INTERCOOLER ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
001 | A 381 413 02 61 |
| 415 | PROTECTIVE CAP FOLLOWER FLANGE VALID FOR VEHICLES WITH IN-LINE ENGINE FICHTEL & SACHS NO.25 1700 112 024, FROM IDENT NO. 5 344429 ALSO EXCHANGEABLE INDIVIDUALLY ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH BEARINGBRACKET INTERMEDIATE LEVER MOUNTED ON CAB PIVOT BEARING |
001 | A 381 413 04 61 |
| 418 | SCREW FOLLOWER FLANGE TO PROPELLER SHAFT |
001 | A 383 990 00 19 |
| 421 | THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT |
001 | A 383 282 02 62 |
| 424 | BRACKET PROPELLER SHAFT BEARING,LEFT |
001 | A 385 413 81 42 |
| 427 | BRACKET PROPELLER SHAFT BEARING,RIGHT |
001 | A 385 413 80 42 |
| 430 | SCREW BRACKET TO PROPELLER SHAFT BEARING HOUSING M 10X40 VALID FOR V-ENGINES WITH INTERCOOLER ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
004 | N 000931 010282 |
| 430 | SCREW BRACKET TO PROPELLER SHAFT BEARING HOUSING M 10X25 VALID FOR VEHICLES WITH IN-LINE ENGINE FICHTEL & SACHS NO.25 1700 112 024, FROM IDENT NO. 5 344429 ALSO EXCHANGEABLE INDIVIDUALLY ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH BEARINGBRACKET INTERMEDIATE LEVER MOUNTED ON CAB PIVOT BEARING |
004 | N 000933 010105 |
| 433 | SPRING LOCK WASHER BRACKET TO PROPELLER SHAFT BEARING HOUSING |
004 | N 912004 010102 |
| 436 | WASHER Replaced by: N 007349 010007 |
- | N 007349 010003 |
| 436 | WASHER BRACKET TO PROPELLER SHAFT BEARING HOUSING |
004 | N 007349 010007 |
| 438 | REINFORCEMENT PROPELLER SHAFT BEARING |
001 | A 385 413 00 11 |
| 448 | SCREW BRACKET TO CROSS MEMBER |
004 | N 000961 010042 |
| 449 | REINFORCEMENT BRACKET TO CROSS MEMBER |
004 | A 385 413 01 11 |
| 451 | WASHER Replaced by: N 007349 010007 |
- | N 007349 010003 |
| 451 | WASHER BRACKET TO CROSS MEMBER |
004 | N 007349 010007 |
| 454 | NUT BRACKET TO CROSS MEMBER |
004 | N 913002 010010 |
| 500 | PROPELLER SHAFT FROM INTERMEDIATE BEARING TO REAR AXLE 1314 MM VALID FOR SPECIAL VEHICLES ONLY 20/60 FROM IDENT-NO. 5 202934 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 381 410 72 02 |
| 500 | PROPELLER SHAFT ALL VEHICLES WITH INTERCOOLED ENGINES |
001 | A 674 410 45 02 |
| 515 | DRIVE FLANGE | 002 | A 381 411 08 11 |
| 518 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31 |
- | A 617 410 00 31 |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) 20/60 UP TO IDNET-NO. 5 202933 |
002 | A 000 410 40 31 |
| 521 | GREASE NIPPLE | 002 | N 071412 008302 |
| 524 | RETAINING RING AS REQUIRED 1.750 MM |
008 | N 000472 042001 |
| 524 | LOCK AS REQUIRED 1.875 MM |
008 | A 005 994 99 41 |
| 524 | LOCK AS REQUIRED 2.000 MM |
008 | A 006 994 04 41 |
| 527 | SEAL RING PROTECTIVE TUBE 77X14,5 MM |
001 | A 381 411 05 59 |
| 527 | SEAL RING PROTECTIVE TUBE 74,5X22 MM |
001 | A 000 411 00 59 |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 530 | LUBRICATING NIPPLE | 001 | N 071412 008102 |
| 539 | SCREW Replaced by: A 352 990 47 01 |
- | A 352 990 04 01 |
| 539 | SCREW Replaced by: A 007 990 10 01 |
- | A 352 990 47 01 |
| 539 | SCREW PROPELLER SHAFT TO PROPELLER SHAFT BEARING AND TO REAR AXLE |
016 | A 007 990 10 01 |
| 542 | SPRING LOCK WASHER PROPELLER SHAFT TO PROPELLER SHAFT BEARING AND TO REAR AXLE |
016 | N 912004 010102 |
| 545 | NUT PROPELLER SHAFT TO PROPELLER SHAFT BEARING AND TO REAR AXLE |
016 | N 000934 010010 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy