| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | FRONT AXLE WITH BRAKES |
001 | A 650 330 10 00 |
| 008 | FRONT AXLE HOUSING (AXLE CASING) |
001 | A 385 330 53 05 |
| 011 | CYLINDER PIN BEARING COVER TO AXLE HOUSING |
004 | N 000007 006205 |
| 014 | SCREW Replaced by: A 000 990 55 04 |
- | N 914126 016001 |
| 014 | SCREW THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE Replaced by: A 006 990 09 04 |
- | A 000 990 55 04 |
| 014 | SCREW BEARING COVER TO AXLE HOUSING M 16X90 |
004 | A 006 990 09 04 |
| 014 | SCREW THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE Replaced by: A 006 990 10 04 |
- | A 000 990 58 04 |
| 014 | SCREW BEARING COVER TO AXLE HOUSING M 16X100 |
004 | A 006 990 10 04 |
| 023 | PIN AXLE TUBE TO AXLE HOUSING |
012 | A 352 351 01 74 |
| 026 | OIL COLLECTOR 115.00 MM |
001 | A 321 357 00 82 |
| 026 | OIL COLLECTOR 108.70 MM |
001 | A 385 331 00 60 |
| 029 | BRACKET Replaced by: A 385 323 12 40 |
- | A 385 323 09 40 |
| 029 | BRACKET SHOCK ABSORBER |
002 | A 385 323 12 40 |
| 032 | NEEDLE BEARING DRIVE SHAFT IN AXLE TUBE Replaced by: A 003 981 94 18 |
002 | A 002 981 74 10 |
| 032 | NEEDLE ROLLER BEARING DRIVE SHAFT IN AXLE TUBE |
002 | A 003 981 94 18 |
| 035 | SEAL RING Replaced by: A 006 997 12 46 |
- | A 002 997 33 47 |
| 035 | SEAL RING REAR AXLE TUBE |
002 | A 006 997 12 46 |
| 035 | SEAL RING REAR AXLE TUBE |
002 | A 022 997 64 47 |
| 038 | SET SCREW Replaced by: A 314 353 01 76 |
- | A 314 353 00 76 |
| 038 | SET SCREW RING GEAR CHECK |
001 | A 314 353 01 76 |
| 041 | SET SCREW Replaced by: A 383 353 03 76 |
- | A 385 353 00 76 |
| 041 | SET SCREW Replaced by: A 383 353 03 76 |
- | A 322 353 01 76 |
| 041 | SET SCREW Replaced by: A 674 353 00 76 |
- | A 383 353 03 76 |
| 041 | SET SCREW RING GEAR CHECK |
001 | A 674 353 00 76 |
| 044 | SLIDE RING GEAR CHECK |
001 | A 312 353 10 49 |
| 047 | SLIDE RING GEAR CHECK |
001 | A 385 353 01 49 |
| 050 | SCREW Replaced by: A 385 337 01 71 |
- | A 322 351 01 71 |
| 050 | SCREW SET SCREW |
001 | A 385 337 01 71 |
| 053 | NUT RING GEAR CHECK |
001 | N 000936 022002 |
| 056 | NUT RING GEAR CHECK |
001 | A 315 990 00 51 |
| 059 | NUT Replaced by: N 913001 014003 |
- | A 385 990 06 51 |
| 059 | NUT SET SCREW |
001 | N 913001 014003 |
| 062 | GASKET Replaced by: A 385 331 12 80 |
- | A 385 331 01 80 |
| 062 | GASKET Replaced by: A 385 331 12 80 |
- | A 385 331 10 80 |
| 062 | GASKET COVER TO AXLE HOUSING TO 385 330 02 21 , 06 21 TO BE ADAPTED DURING ASSEMBLY |
001 | A 385 331 12 80 |
| 062 | GASKET COVER TO AXLE HOUSING |
001 | A 385 331 13 80 |
| 065 | COVER Replaced by: A 385 330 01 21 |
- | A 385 330 00 21 |
| 065 | COVER UP TO FRONT AXLE 2 224023,MIND HIGHER OIL LEVEL FIRST EXHAUST STOCK OF OLD PARTS UP TO FRONT AXLE F 013059 Replaced by: A 385 331 04 08 |
- | A 385 330 01 21 |
| 065 | COVER Replaced by: A 385 330 02 21 |
- | A 385 331 04 08 |
| 065 | COVER Replaced by: A 385 331 06 08 |
- | A 385 330 02 21 |
| 065 | COVER AXLE HOUSING |
001 | A 385 331 06 08 |
| 065 | COVER AXLE HOUSING |
001 | A 385 331 08 08 |
| 068 | PROTECTIVE PLATE Replaced by: A 615 350 04 21 |
- | A 322 350 00 83 |
| 068 | COVER Replaced by: A 615 351 07 08 |
- | A 615 350 04 21 |
| 068 | COVER |
001 | A 615 351 07 08 |
| 071 | SCREW Replaced by: N 910106 010018 |
- | N 914125 010307 |
| 071 | HEXAGON HEAD BOLT COVER AND PROTECTIVE PLATE TO AXLE HOUSING |
007 | N 910106 010018 |
| 074 | SCREW COVER AND PROTECTIVE PLATE TO AXLE HOUSING |
005 | N 914125 010312 |
| 077 | SCREW COVER AND PROTECTIVE PLATE TO AXLE HOUSING M 10X30 |
012 | N 914112 010001 |
| 077 | SCREW COVER TO AXLE HOUSING M 10X20 |
012 | A 000 990 87 04 |
| 080 | SCREW PLUG Replaced by: A 352 997 00 32 |
- | A 186 997 00 32 |
| 080 | SCREW PLUG OIL FILLING AND OIL DRAIN |
002 | A 352 997 00 32 |
| 083 | DRIVE SHAFT Replaced by: A 385 330 07 01 |
- | A 385 330 04 01 |
| 083 | DRIVE SHAFT LEFT |
001 | A 385 330 07 01 |
| 083 | DRIVE SHAFT Replaced by: A 652 330 04 01 |
- | A 652 330 02 01 |
| 083 | DRIVE SHAFT LEFT |
001 | A 652 330 04 01 |
| 086 | DRIVE SHAFT RIGHT |
001 | A 385 330 05 01 |
| 086 | DRIVE SHAFT RIGHT |
001 | A 652 330 03 01 |
| 089 | DRIVE SHAFT OUTSIDE TO 385 330 04 01;05 01;07 01 |
002 | A 385 330 02 01 |
| 089 | DRIVE SHAFT OUTSIDE TO 652 330 02 01;03 01;04 01 |
002 | A 975 330 23 01 |
| 092 | DRIVE SHAFT Replaced by: A 385 330 06 01 |
- | A 385 330 00 01 |
| 092 | DRIVE SHAFT INSIDE LEFT TO 385 330 04 01;07 01 |
001 | A 385 330 06 01 |
| 092 | DRIVE SHAFT Replaced by: A 652 330 07 01 |
- | A 652 330 05 01 |
| 092 | DRIVE SHAFT INSIDE LEFT TO 652 330 02 01;04 01 |
001 | A 652 330 07 01 |
| 095 | DRIVE SHAFT INSIDE RIGHT TO 385 330 05 01 |
001 | A 385 330 01 01 |
| 095 | DRIVE SHAFT INSIDE RIGHT TO 652 330 03 01 |
001 | A 652 330 06 01 |
| 098 | INNER RING Replaced by: A 381 981 02 81 |
- | A 385 981 02 81 |
| 098 | INNER RING DRIVE SHAFT |
004 | A 381 981 02 81 |
| 101 | FOLLOWER DOUBLE PROPELLER SHAFT TO 385 330 04 01;05 01;07 01 |
001 | A 000 337 06 17 |
| 101 | FOLLOWER DOUBLE PROPELLER SHAFT TO 652 330 02 01;03 01;04 01 |
002 | A 975 337 00 17 |
| JOINT CROSS Replaced by: A 975 337 01 11 |
- | A 975 337 00 11 | |
| JOINT CROSS DOUBLE PROPELLER SHAFT TO 652 330 02 01;03 01;04 01 |
004 | A 975 337 01 11 | |
| BUSHING Replaced by: A 020 981 17 10 |
- | A 381 335 00 38 | |
| NEEDLE BEARING JOINT BEARING TO 652 330 02 01;03 01;04 01 |
004 | A 020 981 17 10 | |
| NEEDLE BEARING Replaced by: A 020 981 18 10 |
- | A 019 981 38 10 | |
| NEEDLE BEARING JOINT BEARING TO 652 330 02 01;03 01;04 01 |
012 | A 020 981 18 10 | |
| SCREW PLUG Replaced by: N 007604 010108 |
- | N 007604 010102 | |
| SCREW PLUG JOINT CROSS TO 652 330 02 01;03 01;04 01 |
004 | N 007604 010108 | |
| SEALING RING SCREW PLUG TO 652 330 02 01;03 01;04 01 |
004 | N 915035 000004 | |
| 104 | JOINT CROSS Replaced by: A 000 586 20 33 |
- | A 000 337 08 11 |
| 104 | UNIVERSAL JOINT Replaced by: A 000 586 20 33 |
- | A 000 330 00 28 |
| 104 | REPAIR KIT DRIVE SHAFT,OUTER JOURNAL CROSS TO 385 330 04 01;05 01;07 01 |
002 | A 000 586 20 33 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.350 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 01 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.375 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 02 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.400 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 03 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.425 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 04 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.450 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 05 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.475 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 06 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.500 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 07 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.525 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 08 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.550 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 09 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.575 MM; TO 385 330 04 01;05 01;07 01 |
001 | A 385 994 10 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.950 MM; TO 652 330 02 01;03 01;04 01 |
001 | A 381 994 01 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 2.975 MM; TO 652 330 02 01;03 01;04 01 |
001 | A 381 994 02 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 3.000 MM; TO 652 330 02 01;03 01;04 01 |
001 | A 381 994 03 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 3.025 MM; TO 652 330 02 01;03 01;04 01 |
001 | A 381 994 04 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 3.050 MM; TO 652 330 02 01;03 01;04 01 |
001 | A 381 994 05 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 3.075 MM; TO 652 330 02 01;03 01;04 01 |
001 | A 381 994 06 41 |
| 107 | LOCK JOINT CROSS,AS REQUIRED 3.100 MM; TO 652 330 02 01;03 01;04 01 |
001 | A 381 994 07 41 |
| 113 | HOUSING LEFT |
001 | A 652 337 01 06 |
| 113 | HOUSING RIGHT |
001 | A 385 337 07 06 |
| 116 | COVER JOINT HOUSING |
002 | A 385 337 03 30 |
| 119 | SPRING LOCK WASHER COVER TO JOINT HOUSING |
008 | N 912004 012100 |
| 122 | HEXAGON HEAD BOLT COVER TO JOINT HOUSING |
008 | N 910105 012003 |
| 125 | SCREW PLUG JOINT HOUSING |
002 | A 383 997 00 32 |
| 128 | SEAL RING JOINT HOUSING |
002 | A 360 332 01 59 |
| 131 | ROLLER BEARING Replaced by: A 001 981 39 18 |
- | A 001 981 05 18 |
| 131 | ROLLER BEARING FIRST EXHAUST STOCK OF OLD PARTS UP TO FRONT AXLE F 010156 Replaced by: A 002 981 39 18 |
- | A 001 981 39 18 |
| 131 | ROLLER BEARING LOWER LEFT KINGPIN |
002 | A 002 981 39 18 |
| 131 | ROLLER BEARING LEFT STEERING ARM END,WITH L.H.D.; OR RIGHT STEERING ARM END,WITH R.H.D. |
001 | A 002 981 39 18 |
| 134 | NEEDLE BEARING KINGPIN |
004 | A 014 981 37 10 |
| 137 | KINGPIN FIRST EXHAUST STOCK OF OLD PARTS UP TO FRONT AXLE 2 452902 Replaced by: A 385 586 00 33 |
- | A 385 332 00 06 |
| 137 | KINGPIN Replaced by: A 385 586 00 33 |
- | A 385 332 01 06 |
| 137 | REPAIR KIT Replaced by: A 385 330 00 19 |
- | A 385 586 00 33 |
| 137 | KING PIN Replaced by: A 385 330 01 19 |
- | A 385 330 00 19 |
| 143 | KING PIN (PARTS KIT);STANDARD; L.H.D.,LEFT;R.H.D.,RIGHT |
001 | A 652 330 00 19 |
| 146 | KING PIN (PARTS KIT);STANDARD; L.H.D.,RIGHT;R.H.D.,LEFT |
001 | A 617 330 01 19 |
| 152 | HEXAGON HEAD BOLT UPPER KINGPIN TO HOUSING M 16X35 |
006 | N 910106 016004 |
| 155 | HEXAGON HEAD BOLT LOWER KING PIN TO HOUSING |
008 | N 910106 014012 |
| 158 | SCREW Replaced by: A 000 990 74 04 |
- | A 652 990 05 04 |
| 158 | SCREW STEERING ARM TO STEERING KNUCKLE M 16X70 SERRATED BOLT |
004 | A 000 990 74 04 |
| 158 | SCREW Replaced by: A 000 990 69 04 |
- | A 652 990 04 04 |
| 158 | SCREW STEERING ARM TO STEERING KNUCKLE M 16X50 SERRATED BOLT |
002 | A 000 990 69 04 |
| 161 | CONSOLE Replaced by: A 385 330 00 65 |
- | A 385 331 01 58 |
| 161 | CONSOLE OUTSIDE LEFT |
001 | A 385 331 15 58 |
| 161 | CONSOLE OUTSIDE RIGHT |
001 | A 385 331 16 58 |
| 164 | CONSOLE THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 385 331 12 58 |
- | A 385 331 06 58 |
| 164 | CONSOLE INSIDE ONLY USE CAST-IRON OR SHEET-IRON BRAKE SHOES AT THE SAME TIME ON ONE AXLE |
002 | A 385 331 12 58 |
| 167 | BRACKET | 002 | A 460 331 02 58 |
| 170 | GASKET SPLIT REPAIR POSSIBLE WHEN INSTALLED |
002 | A 385 331 11 80 |
| 173 | GASKET SEAL HOLDER |
002 | A 385 331 08 80 |
| 176 | GASKET BALL |
002 | A 385 331 06 80 |
| ANGLE CENTRAL LUBRICATION TO BE ADAPTED DURING ASSEMBLY |
002 | A 360 428 02 43 | |
| 179 | WASHER Replaced by: N 000125 010532 |
- | N 000125 010518 |
| 179 | WASHER SEAL HOLDER TO HOUSING |
002 | N 000125 010532 |
| 182 | HEXAGON HEAD BOLT SEAL HOLDER TO HOUSING |
012 | N 910105 010040 |
| 182 | HEXAGON HEAD BOLT SEAL HOLDER TO HOUSING |
002 | N 910106 012001 |
| 185 | SCREW STOP |
002 | A 385 337 00 71 |
| 188 | HEXAGON NUT STOP SCREW M12X1.5 |
002 | N 000000 005212 |
| 188 | NUT STOP SCREW M 12, HOEHE 7 MM |
002 | A 001 990 06 50 |
| 194 | STEERING ARM LEFT |
001 | A 652 338 01 01 |
| 206 | LUBRICATING NIPPLE DEPARTURE ANGLE DEGREE: 45 ; 10 MM |
NB | N 071412 010200 |
| 209 | LUBRICATING NIPPLE DEPARTURE ANGLE DEGREE: 90 ; 10 MM |
NB | N 071412 010300 |
| ELBOW KINGPIN M 10X1 |
004 | A 000 573 27 30 | |
| ELBOW KINGPIN |
004 | A 000 573 31 30 | |
| 212 | STEERING ARM LEFT |
001 | A 385 338 09 05 |
| 215 | STEERING ARM RIGHT |
001 | A 385 338 09 06 |
| 218 | SCREW THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Replaced by: A 652 990 19 04 |
- | N 914112 012006 |
| 218 | SCREW Replaced by: A 000 990 77 04 |
- | A 652 990 19 04 |
| 218 | SCREW STEERING ARM TO JOINT HOUSING M 12X35 SERRATED BOLT |
008 | A 000 990 77 04 |
| 221 | SUPPORTING SLEEVE | 002 | A 385 332 06 16 |
| 224 | NEEDLE BEARING DRIVE SHAFT IN SUPPORTING SLEEVE Replaced by: A 003 981 94 18 |
002 | A 002 981 74 10 |
| 224 | NEEDLE ROLLER BEARING DRIVE SHAFT IN SUPPORTING SLEEVE |
002 | A 003 981 94 18 |
| 227 | SEAL RING Replaced by: A 016 997 51 47 |
- | A 011 997 63 47 |
| 227 | SEAL RING Replaced by: A 016 997 51 47 |
- | A 011 997 42 47 |
| 227 | SEAL RING SUPPORTING SLEEVE |
002 | A 016 997 51 47 |
| 227 | SEAL RING SUPPORTING SLEEVE |
002 | A 022 997 63 47 |
| 230 | WHEEL HUB | 002 | A 652 334 00 01 |
| 233 | WHEEL MOUNTING BOLT Replaced by: A 389 401 00 71 |
- | A 381 401 01 71 |
| 233 | WHEEL MOUNTING BOLT MINOR REPAIRS Replaced by: A 000 401 24 71 |
020 | A 389 401 00 71 |
| 233 | WHEEL MOUNTING BOLT | 020 | A 000 401 24 71 |
| 236 | SPACER WASHER OUTSIDE |
002 | A 385 331 00 52 |
| 239 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 005 981 14 05 |
| 239 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 005 981 15 05 |
| 239 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 005 981 16 05 |
| 242 | TAPERED ROLLER BEARING INSIDE |
002 | A 005 981 84 05 |
| 242 | TAPERED ROLLER BEARING INSIDE |
002 | A 005 981 85 05 |
| 242 | TAPERED ROLLER BEARING INSIDE |
002 | A 006 981 01 05 |
| 242 | TAPERED ROLLER BEARING INSIDE |
002 | A 001 980 66 02 |
| 245 | SEAL RING FIRST EXHAUST STOCK OF OLD PARTS UP TO FRONT AXLE 09.00 Replaced by: A 019 997 80 47 |
- | A 009 997 23 47 |
| 245 | SEAL RING INSIDE |
002 | A 019 997 80 47 |
| 245 | SEAL RING FIRST EXHAUST STOCK OF OLD PARTS UP TO FRONT AXLE 09.00 Replaced by: A 019 997 90 47 |
- | A 007 997 31 47 |
| 245 | SEAL RING INSIDE |
002 | A 019 997 90 47 |
| 248 | NUT Replaced by: A 617 356 00 26 |
- | N 070852 085000 |
| 248 | GROOVED NUT HUB TO SUPPORTING SLEEVE |
004 | A 617 356 00 26 |
| 251 | LOCKING PLATE HUB TO SUPPORTING SLEEVE |
002 | N 070952 085201 |
| 254 | FOLLOWER OUTSIDE |
002 | A 385 337 00 17 |
| 257 | SCREW Replaced by: A 000 990 76 04 |
- | A 652 990 18 04 |
| 257 | SCREW FOLLOWER TO DRUM HUB M 12X30 SERRATED BOLT |
016 | A 000 990 76 04 |
| 260 | THRUST RING FOLLOWER TO DRUM HUB |
002 | A 360 337 00 15 |
| 263 | RETAINING RING FOLLOWER TO DRUM HUB |
002 | N 900055 050310 |
| GASKET FOLLOWER TO DRUM HUB |
002 | A 650 337 02 80 | |
| 266 | NUT Replaced by: A 385 351 02 72 |
- | A 327 353 02 72 |
| 266 | NUT FOLLOWER TO DRIVE SHAFT |
002 | A 385 351 02 72 |
| 269 | DIFFERENTIAL GEAR |
001 | A 385 330 09 23 |
| 269 | DIFFERENTIAL GEAR Replaced by: A 381 330 01 23 |
- | A 381 330 00 23 |
| 269 | DIFFERENTIAL GEAR WITH INTERLOCK SERRATIONS |
001 | A 381 330 01 23 |
| 272 | SCREW COVER TO DIFFERENTIAL CASE |
008 | A 006 990 16 04 |
| 275 | DIFFERENTIAL SPIDER DIFFERENTIAL GEAR |
001 | A 383 353 01 20 |
| 275 | DIFFERENTIAL SPIDER DIFFERENTIAL GEAR |
001 | A 322 353 01 20 |
| 278 | DIFFERENTIAL PINION DIFFERENTIAL GEAR TO 385 335 00 15 |
004 | A 385 353 02 14 |
| 278 | DIFFERENTIAL PINION DIFFERENTIAL GEAR TO 360 335 00 15 |
004 | A 302 353 00 14 |
| 281 | SPHERICAL WASHER DIFFERENTIAL GEAR |
004 | A 352 353 00 24 |
| 284 | SIDE GEAR DIFFERENTIAL GEAR |
002 | A 360 335 00 15 |
| 284 | SIDE GEAR DIFFERENTIAL GEAR |
002 | A 385 335 00 15 |
| 287 | THRUST WASHER Replaced by: A 674 353 03 62 |
- | A 322 353 01 62 |
| 287 | THRUST WASHER DIFFERENTIAL GEAR |
002 | A 674 353 03 62 |
| 290 | REPAIR KIT DIFFERENTIAL GEAR |
001 | A 381 586 02 35 |
| 293 | RING GEAR AND PINION RATIO: 41:7 |
001 | A 385 330 02 39 |
| 296 | SCREW Replaced by: A 673 990 04 01 |
- | A 318 990 00 01 |
| 296 | SCREW RING GEAR TO DIFFERENTIAL CASE |
016 | A 673 990 04 01 |
| 299 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR BEARING |
002 | A 001 981 49 05 |
| 299 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR BEARING |
002 | A 003 981 50 05 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR LESS INTERLOCK TOOTHING |
002 | A 003 981 47 05 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR WITH INTERLOCK TOOTHING |
001 | A 003 981 47 05 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR LESS INTERLOCK TOOTHING |
002 | A 003 981 48 05 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR WITH INTERLOCK TOOTHING |
001 | A 003 981 48 05 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR LESS INTERLOCK TOOTHING |
002 | A 008 981 53 05 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR WITH INTERLOCK TOOTHING |
001 | A 008 981 53 05 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR LESS INTERLOCK TOOTHING |
002 | A 000 980 79 02 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR WITH INTERLOCK TOOTHING |
001 | A 000 980 79 02 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR WITH INTERLOCK TOOTHING |
001 | A 004 981 29 05 |
| 299 | TAPERED ROLLER BEARING IN CASE OF DIFFERENTIAL GEAR WITH INTERLOCK TOOTHING |
001 | A 004 981 32 05 |
| 302 | ADJUSTING NUT Replaced by: A 385 335 00 25 |
- | A 340 335 00 25 |
| 302 | ADJUSTING NUT Replaced by: A 674 353 00 25 |
- | A 385 335 00 25 |
| 302 | SCREW COLLAR RING GEAR AND PINION SETTING TO 385 330 09 23 |
002 | A 674 353 00 25 |
| 302 | SCREW COLLAR RING GEAR AND PINION SETTING TO 381 330 00 23 |
002 | A 321 353 00 25 |
| 302 | SCREW COLLAR RING GEAR AND PINION SETTING TO 381 330 01 23 |
001 | A 321 353 00 25 |
| 302 | SCREW COLLAR RING GEAR AND PINION SETTING TO 381 330 01 23 |
001 | A 383 353 01 25 |
| 305 | LOCK SCREW COLLAR TO 381 330 00 23,385 330 09 23 |
002 | A 312 353 11 73 |
| 305 | LOCK SCREW COLLAR TO 381 330 01 23 |
001 | A 312 353 11 73 |
| 305 | LOCK SCREW COLLAR TO 381 330 01 23 |
001 | A 352 353 00 73 |
| 308 | TOOTH LOCK WASHER LOCK TO DIFFERENTIAL CASE BEARING COVER |
002 | N 006797 008120 |
| 311 | SCREW Replaced by: N 304017 008016 |
- | N 000933 008212 |
| 311 | HEXAGON HEAD BOLT LOCK TO DIFFERENTIAL CASE BEARING COVER |
002 | N 304017 008016 |
| 314 | CYLINDR. ROLLER BEARING DRIVE PINION BEARING |
001 | A 002 981 40 01 |
| 314 | CYLINDR. ROLLER BEARING DRIVE PINION BEARING |
001 | A 002 981 41 01 |
| 314 | CYLINDR. ROLLER BEARING DRIVE PINION BEARING |
001 | A 003 981 22 01 |
| 314 | CYLINDR. ROLLER BEARING DRIVE PINION BEARING |
001 | A 003 981 29 01 |
| 314 | CYLINDR. ROLLER BEARING DRIVE PINION BEARING |
001 | A 006 981 90 01 |
| 317 | RETAINING RING CYLINDRICAL ROLLER BEARING TO DRIVE PINION |
001 | N 000471 029000 |
| 320 | SNAP RING CYLINDRICAL ROLLER BEARING TO DRIVE PINION |
001 | A 324 994 00 37 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 6.96 MM |
001 | A 670 353 97 51 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 6.98 MM |
001 | A 670 353 98 51 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 6.98 MM |
001 | A 673 353 02 51 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.00 MM |
001 | A 670 353 99 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.02 MM |
001 | A 670 353 09 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.02 MM |
001 | A 673 353 04 51 |
| 323 | SPACER WASHER Replaced by: A 669 353 40 51 |
- | A 670 353 10 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.04 MM |
001 | A 669 353 40 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.06 MM |
001 | A 670 353 11 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.06 MM |
001 | A 673 353 06 51 |
| 323 | SPACER WASHER Replaced by: A 669 353 40 51 |
- | A 670 353 12 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.08 MM |
001 | A 669 353 40 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.10 MM |
001 | A 670 353 13 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.10 MM |
001 | A 673 353 08 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.12 MM |
001 | A 670 353 14 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.14 MM |
001 | A 670 353 15 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.14 MM |
001 | A 673 353 10 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.16 MM |
001 | A 670 353 16 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.18 MM |
001 | A 670 353 17 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.18 MM |
001 | A 673 353 12 51 |
| 323 | SPACER WASHER Replaced by: A 669 353 45 51 |
- | A 670 353 18 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.20 MM |
001 | A 669 353 45 51 |
| 323 | COMPENSATING RING DRIVE PINION;AS REQUIRED 7.24 MM |
001 | A 669 353 47 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.22 MM |
001 | A 670 353 19 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.22 MM |
001 | A 673 353 14 51 |
| 323 | SPACER WASHER Replaced by: A 669 353 50 51 |
- | A 670 353 20 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.24 MM |
001 | A 669 353 50 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.26 MM |
001 | A 670 353 21 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.26 MM |
001 | A 673 353 16 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.28 MM |
001 | A 670 353 22 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.30 MM |
001 | A 670 353 23 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.30 MM |
001 | A 673 353 18 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.32 MM |
001 | A 670 353 24 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.34 MM |
001 | A 670 353 25 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.34 MM |
001 | A 673 353 20 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.36 MM |
001 | A 670 353 26 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.38 MM |
001 | A 670 353 27 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.38 MM |
001 | A 673 353 22 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.40 MM |
001 | A 670 353 28 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED |
001 | A 670 353 29 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.42 MM |
001 | A 673 353 24 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.44 MM |
001 | A 670 353 30 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED |
001 | A 670 353 31 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.46 MM |
001 | A 673 353 26 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.48 MM |
001 | A 670 353 32 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED |
001 | A 670 353 33 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.50 MM |
001 | A 673 353 28 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.52 MM |
001 | A 670 353 34 52 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED |
001 | A 670 353 35 52 |
| 323 | SPACER RING DRIVE PINION;AS REQUIRED 7.54 MM |
001 | A 673 353 30 51 |
| 323 | SPACER WASHER DRIVE PINION;AS REQUIRED 7.56 MM |
001 | A 670 353 36 52 |
| 326 | SPACER WASHER DRIVE PINION;AS REQUIRED 0.10 MM |
001 | A 314 353 65 52 |
| 326 | SPACER WASHER DRIVE PINION;AS REQUIRED 0.10 MM |
001 | A 670 353 08 52 |
| 326 | SPACER WASHER DRIVE PINION;AS REQUIRED 0.15 MM |
001 | A 670 353 07 52 |
| 326 | SPACER WASHER Replaced by: A 314 353 66 52 |
- | A 314 353 68 52 |
| 326 | SPACER WASHER DRIVE PINION;AS REQUIRED 0.20 MM |
001 | A 314 353 66 52 |
| 326 | SPACER WASHER DRIVE PINION;AS REQUIRED 0.20 MM |
001 | A 670 353 06 52 |
| 326 | SPACER WASHER DRIVE PINION;AS REQUIRED 0.50 MM |
001 | A 314 353 67 52 |
| 326 | SPACER WASHER DRIVE PINION;AS REQUIRED 0.50 MM |
001 | A 670 353 05 52 |
| 329 | TAPERED ROLLER BEARING DRIVE PINION BEARING |
002 | A 002 981 87 05 |
| 329 | TAPERED ROLLER BEARING DRIVE PINION BEARING |
002 | A 002 981 88 05 |
| 329 | TAPERED ROLLER BEARING DRIVE PINION BEARING |
002 | A 008 981 15 05 |
| 329 | TAPERED ROLLER BEARING DRIVE PINION BEARING |
002 | A 008 981 16 05 |
| 329 | TAPERED ROLLER BEARING DRIVE PINION BEARING |
002 | A 008 981 66 05 |
| 332 | SPACER RING DRIVE PINION |
001 | A 312 353 19 51 |
| 335 | SPACER RING DRIVE PINION |
001 | A 314 353 04 51 |
| 338 | SCREW COLLAR RING GEAR AND PINION SETTING |
001 | A 316 353 00 25 |
| 338 | SCREW COLLAR RING GEAR AND PINION SETTING |
001 | A 670 353 01 25 |
| 341 | SEAL RING Replaced by: A 011 997 74 47 |
- | A 001 997 32 47 |
| 341 | SEAL RING SCREW COLLAR |
001 | A 011 997 74 47 |
| 344 | LOCK SCREW COLLAR |
001 | A 312 353 11 73 |
| 347 | TOOTH LOCK WASHER LOCK TO AXLE HOUSING |
001 | N 006797 008120 |
| 350 | SCREW Replaced by: N 304017 008039 |
- | N 000933 008130 |
| 350 | HEXAGON HEAD BOLT LOCK TO AXLE HOUSING |
001 | N 304017 008039 |
| 353 | FLANGE 130 MM |
001 | A 318 350 01 45 |
| 356 | PROTECTIVE PLATE | 001 | A 312 262 10 63 |
| 359 | NUT Replaced by: A 385 351 03 72 |
- | A 324 353 00 72 |
| 359 | NUT FLANGE TO DRIVE PINION |
001 | A 385 351 03 72 |
| 362 | TIE ROD Replaced by: A 385 330 21 03 |
- | A 385 330 13 03 |
| 362 | TIE ROD LEMFOERDER |
001 | A 385 330 21 03 |
| 362 | TIE ROD EHRENREICH |
001 | A 385 330 22 03 |
| 365 | BOOT Replaced by: A 000 462 17 96 |
- | A 335 460 00 96 |
| 365 | BOOT |
001 | A 000 462 17 96 |
| 368 | DRAG LINK END Replaced by: A 000 460 28 48 |
- | A 000 460 03 48 |
| 368 | DRAG LINK END Replaced by: A 001 460 08 48 |
- | A 000 460 28 48 |
| 368 | DRAG LINK END Replaced by: A 001 460 22 48 |
- | A 001 460 08 48 |
| 368 | DRAG LINK END Replaced by: A 001 460 77 48 |
- | A 001 460 22 48 |
| 368 | BALL JOINT R.H. THREAD LEMFOERDER |
001 | A 001 460 77 48 |
| 368 | DRAG LINK END Replaced by: A 001 460 12 48 |
- | A 000 460 29 48 |
| 368 | DRAG LINK END Replaced by: A 001 460 22 48 |
- | A 001 460 12 48 |
| 368 | DRAG LINK END Replaced by: A 001 460 77 48 |
- | A 001 460 22 48 |
| 368 | BALL JOINT R.H. THREAD EHRENREICH |
001 | A 001 460 77 48 |
| 371 | BOOT THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Replaced by: A 000 462 17 96 |
- | A 335 460 00 96 |
| 371 | BOOT |
001 | A 000 462 17 96 |
| 374 | CLAMP Replaced by: A 000 338 25 45 |
- | A 000 338 23 45 |
| 374 | CLAMP BALL JOINT TO TIE ROD LEMFOERDER |
001 | A 000 338 25 45 |
| 374 | CLAMP BALL JOINT TO TIE ROD EHRENREICH |
001 | A 000 338 31 45 |
| 377 | SCREW Replaced by: N 000960 012384 |
- | N 000960 012197 |
| 377 | SCREW BALL JOINT TO TIE ROD M 12X55 |
002 | N 000960 012384 |
| 377 | SCREW Replaced by: N 000960 012353 |
- | N 000960 012246 |
| 377 | SCREW BALL JOINT TO TIE ROD M 12X60 |
001 | N 000960 012353 |
| 380 | HEXAGON NUT BALL JOINT TO TIE ROD |
002 | N 910113 012002 |
| 380 | HEXAGON NUT BALL JOINT TO TIE ROD |
001 | N 910113 012002 |
| 383 | NUT TIE ROD TO STEERING ARM M 24 |
002 | N 000937 024002 |
| 383 | NUT TIE ROD TO STEERING ARM M 24 |
002 | A 001 990 54 51 |
| 386 | COTTER PIN TIE ROD TO STEERING ARM 5 MM |
002 | N 000094 005045 |
| 389 | UNIT IDENTIFICATION PLATE Replaced by: A 437 584 06 24 |
001 | A 385 584 70 24 |
| 389 | UNIT IDENTIFICATION PLATE | 001 | A 437 584 06 24 |
| 392 | RIVET UNIT IDENTIFICATION PLATE TO FRONT AXLE |
002 | A 385 990 00 96 |
| 395 | FITTING AXLE BREATHING |
001 | A 383 351 00 65 |
| 395 | FITTING AXLE BREATHING |
001 | A 901 351 00 65 |
| 398 | HOSE AXLE BREATHING |
001 | A 008 997 90 82 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy