| №- | Name | A* | Part number |
|---|---|---|---|
| 300 | PROPELLER SHAFT ALSO INSTALLED ON 5 386449 VALID FOR SPECIAL VEHICLES ONLY FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. K 364932 Replaced by: A 656 410 12 04 |
- | A 395 410 37 04 |
| 300 | PROPELLER SHAFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. K 364932 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 656 410 28 04 |
001 | A 656 410 12 04 |
| 300 | PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING 1500 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 656 410 28 04 |
| 315 | DRIVE FLANGE ALL VEHICLES WITH INTERCOOLED ENGINES |
001 | A 395 411 12 11 |
| 315 | DRIVE FLANGE VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM Replaced by: A 656 411 03 11 |
001 | A 656 411 00 11 |
| 315 | DRIVE FLANGE VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
001 | A 656 411 03 11 |
| 318 | UNIVERSAL JOINT CROSS WITH BUSHINGS ALL VEHICLES WITH INTERCOOLED ENGINES |
001 | A 940 410 00 31 |
| 318 | UNIVERSAL JOINT CROSS FOR NON MAINTENANCE-FREE PROP-SHAFTS,USE UP OLD PART NOS. UP TO IDENT NO.: K 364932 ATTENTION: WHEN PLACING ORDERS, PLEASE QUOTE VEHICLE IDENT NO. ONLY IF FRAME MOUNTED CABLE HARNESS IS REQUIRED AS AN ASSEMBLY VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM Replaced by: A 942 410 00 31 |
001 | A 656 410 01 31 |
| 318 | UNIVERSAL JOINT CROSS MAINTENANCE-FREE ATTENTION: WHEN PLACING ORDERS, PLEASE QUOTE VEHICLE IDENT NO. ONLY IF FRAME MOUNTED CABLE HARNESS IS REQUIRED AS AN ASSEMBLY VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
001 | A 942 410 00 31 |
| 321 | GREASE NIPPLE | 001 | N 071412 008302 |
| 324 | LOCK AS REQUIRED 2.00 MM ALL VEHICLES WITH INTERCOOLED ENGINES |
004 | A 006 994 31 41 |
| 324 | LOCK AS REQUIRED 2.10 MM ALL VEHICLES WITH INTERCOOLED ENGINES |
004 | A 006 994 35 41 |
| 324 | LOCK AS REQUIRED 2.20 MM ALL VEHICLES WITH INTERCOOLED ENGINES |
004 | A 006 994 39 41 |
| 324 | LOCK AS REQUIRED 2.90 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
004 | A 656 411 10 73 |
| 324 | LOCK VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM Replaced by: A 656 411 06 73 |
004 | A 656 411 01 73 |
| 324 | LOCK AS REQUIRED 3.00 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
004 | A 656 411 06 73 |
| 324 | LOCK VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM Replaced by: A 656 411 06 73 |
004 | A 656 411 05 73 |
| 324 | LOCK AS REQUIRED 3.10 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
004 | A 656 411 06 73 |
| 324 | LOCK AS REQUIRED 3.20 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
004 | A 656 411 09 73 |
| 324 | LOCK AS REQUIRED 3.25 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
004 | A 656 411 14 73 |
| 324 | LOCK AS REQUIRED 3.30 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
004 | A 656 411 17 73 |
| 336 | PROTECTIVE CAP VALID FOR VEHICLES WITH IN-LINE ENGINE |
001 | A 389 413 00 61 |
| 336 | PROTECTIVE CAP ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
001 | A 395 413 00 61 |
| 339 | SCREW PROPELLER SHAFT TO TRANSMISSION |
004 | N 000960 014237 |
| 342 | SPRING LOCK WASHER PROPELLER SHAFT TO TRANSMISSION |
004 | N 912004 014100 |
| 345 | NUT PROPELLER SHAFT TO TRANSMISSION |
004 | N 000934 014020 |
| 400 | INTERMEDIATE BEARING VALID FOR VEHICLES WITH IN-LINE ENGINE Replaced by: A 395 410 06 22 |
- | A 395 410 00 22 |
| 400 | INTERMEDIATE BEARING ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB Replaced by: A 655 410 00 22 |
001 | A 395 410 06 22 |
| 400 | INTERMEDIATE BEARING PROPELLER SHAFT ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
001 | A 655 410 00 22 |
| 403 | BALL BEARING VALID FOR VEHICLES WITH IN-LINE ENGINE |
001 | A 002 981 92 25 |
| 403 | BALL BEARING VALID FOR VEHICLES WITH IN-LINE ENGINE |
001 | A 002 981 93 25 |
| 406 | SNAP RING VALID FOR VEHICLES WITH IN-LINE ENGINE |
002 | N 912009 110200 |
| 409 | PROTECTIVE CAP VALID FOR VEHICLES WITH IN-LINE ENGINE |
002 | A 387 413 02 61 |
| 410 | SPACER WASHER PROPELLER SHAFT BEARING ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
002 | A 655 411 00 52 |
| 412 | CENTERING FLANGE Replaced by: A 645 411 00 46 |
001 | A 645 410 00 30 |
| 412 | FLANGE PROPELLER SHAFT BEARING |
001 | A 645 411 00 46 |
| 415 | PROTECTIVE CAP VALID FOR VEHICLES WITH IN-LINE ENGINE |
001 | A 389 413 00 61 |
| 415 | PROTECTIVE CAP ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER,EXCEPT FOR VEHICLES WITH BEARING BRACKET MOUNTED ON CAB |
001 | A 395 413 00 61 |
| 418 | SCREW FOLLOWER FLANGE TO PROPELLER SHAFT |
001 | A 389 990 00 19 |
| 421 | THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT |
001 | A 389 411 00 62 |
| 424 | BRACKET PROPELLER SHAFT BEARING,LEFT |
001 | A 620 413 31 42 |
| 427 | BRACKET PROPELLER SHAFT BEARING,RIGHT |
001 | A 620 413 30 42 |
| 430 | SCREW BRACKET TO PROPELLER SHAFT BEARING HOUSING |
004 | N 000961 012106 |
| 433 | SPRING LOCK WASHER BRACKET TO PROPELLER SHAFT BEARING HOUSING |
004 | N 912004 012100 |
| 436 | DISK Replaced by: A 123 242 03 66 |
002 | A 329 990 00 40 |
| 436 | WASHER BRACKET TO PROPELLER SHAFT BEARING HOUSING |
002 | A 123 242 03 66 |
| 439 | REINFORCEMENT PROPELLER SHAFT BEARING |
001 | A 395 413 00 11 |
| 442 | SCREW REINFORCEMENT TO BRACKET |
004 | N 000961 012106 |
| 445 | NUT Replaced by: N 910113 012003 |
004 | N 913004 012009 |
| 445 | HEXAGON NUT REINFORCEMENT TO BRACKET |
004 | N 910113 012003 |
| 448 | SCREW Replaced by: A 002 990 27 04 |
004 | N 000961 012108 |
| 448 | SCREW BRACKET TO CROSS MEMBER M 12X30 |
004 | A 002 990 27 04 |
| 451 | DISK Replaced by: A 123 242 03 66 |
004 | A 329 990 00 40 |
| 451 | WASHER BRACKET TO CROSS MEMBER |
004 | A 123 242 03 66 |
| 454 | NUT Replaced by: N 910113 012003 |
004 | N 913004 012009 |
| 454 | HEXAGON NUT BRACKET TO CROSS MEMBER |
004 | N 910113 012003 |
| 500 | PROPELLER SHAFT ALSO INSTALLED ON 5 386449 VALID FOR SPECIAL VEHICLES ONLY FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. K 364932 Replaced by: A 656 410 22 02 |
- | A 395 410 69 02 |
| 500 | PROPELLER SHAFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. K 364932 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 656 410 75 02 |
001 | A 656 410 22 02 |
| 500 | PROPELLER SHAFT FROM INTERMEDIATE BEARING TO REAR AXLE 2287 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 656 410 75 02 |
| 515 | DRIVE FLANGE ALL VEHICLES WITH INTERCOOLED ENGINES |
002 | A 395 411 12 11 |
| 515 | DRIVE FLANGE VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM Replaced by: A 656 411 03 11 |
002 | A 656 411 00 11 |
| 515 | DRIVE FLANGE VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | A 656 411 03 11 |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS ALL VEHICLES WITH INTERCOOLED ENGINES |
002 | A 940 410 00 31 |
| 518 | UNIVERSAL JOINT CROSS FOR NON MAINTENANCE-FREE PROP-SHAFTS,USE UP OLD PART NOS. UP TO IDENT NO.: K 364932 ATTENTION: WHEN PLACING ORDERS, PLEASE QUOTE VEHICLE IDENT NO. ONLY IF FRAME MOUNTED CABLE HARNESS IS REQUIRED AS AN ASSEMBLY VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM Replaced by: A 942 410 00 31 |
002 | A 656 410 01 31 |
| 518 | UNIVERSAL JOINT CROSS MAINTENANCE-FREE ATTENTION: WHEN PLACING ORDERS, PLEASE QUOTE VEHICLE IDENT NO. ONLY IF FRAME MOUNTED CABLE HARNESS IS REQUIRED AS AN ASSEMBLY VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | A 942 410 00 31 |
| 521 | GREASE NIPPLE | 002 | N 071412 008302 |
| 524 | LOCK AS REQUIRED 2.00 MM ALL VEHICLES WITH INTERCOOLED ENGINES |
008 | A 006 994 31 41 |
| 524 | LOCK AS REQUIRED 2.10 MM ALL VEHICLES WITH INTERCOOLED ENGINES |
008 | A 006 994 35 41 |
| 524 | LOCK AS REQUIRED 2.20 MM ALL VEHICLES WITH INTERCOOLED ENGINES |
008 | A 006 994 39 41 |
| 524 | LOCK AS REQUIRED 2.90 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | A 656 411 10 73 |
| 524 | LOCK VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM Replaced by: A 656 411 06 73 |
008 | A 656 411 01 73 |
| 524 | LOCK AS REQUIRED 3.00 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | A 656 411 06 73 |
| 524 | LOCK VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM Replaced by: A 656 411 06 73 |
008 | A 656 411 05 73 |
| 524 | LOCK AS REQUIRED 3.10 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | A 656 411 06 73 |
| 524 | LOCK AS REQUIRED 3.20 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | A 656 411 09 73 |
| 524 | LOCK AS REQUIRED 3.25 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | A 656 411 14 73 |
| 524 | LOCK AS REQUIRED 3.30 MM VALID FOR V-ENGINES WITH INTERCOOLER BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | A 656 411 17 73 |
| 527 | SEAL RING PROTECTIVE TUBE 105X17 MM |
001 | A 395 411 00 59 |
| 527 | SEAL RING PROTECTIVE TUBE 102.5X22 MM |
001 | A 000 411 01 59 |
| 527 | SEAL RING PROTECTIVE TUBE 105.6X12 MM |
001 | A 000 411 02 59 |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
001 | N 071412 008101 |
| 530 | LUBRICATING NIPPLE PROTECTIVE TUBE |
001 | N 071412 008102 |
| 539 | SCREW PROPELLER SHAFT TO PROPELLER SHAFT BEARING AND TO REAR AXLE |
008 | N 000960 014237 |
| 542 | SPRING LOCK WASHER PROPELLER SHAFT |
008 | N 912004 014100 |
| 545 | NUT PROPELLER SHAFT |
008 | N 000934 014020 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy