| №- | Name | A* | Part number |
|---|---|---|---|
| CAMSHAFT FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 283201 YEAR OF MANUFACTURE 1978 Replaced by: A 314 050 19 01 |
- | A 314 050 08 01 | |
| 001 | CAMSHAFT WITH INJECTION PUMP MOUNTED INJECTION TIMING DEVICE;LIFTING PIN WIDTH: 28 MM TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80D OR PES-4A-90D UDES:1 EXHAUST PIPE 309 490 20 19;CONTINUED,SEE FOOTNOTE 10 TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C |
001 | A 314 050 19 01 |
| 001 | CAMSHAFT WITH CAMSHAFT MOUNTED INJECTION TIMING DEVICE;LIFTING PIN WIDTH, 28 MM FROM ENGINE 283202-999999 YEAR OF MANUFACTURE 1978-1990 FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 314 050 18 01 |
| 005 | THRUST WASHER CAMSHAFT FIXING TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C |
001 | A 312 052 02 62 |
| 005 | THRUST WASHER CAMSHAFT FIXING FROM ENGINE 283202-999999 YEAR OF MANUFACTURE 1978-1990 FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 |
001 | A 352 052 07 62 |
| 007 | SPRING LOCK WASHER TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C |
004 | N 912004 008102 |
| 009 | SCREW Replaced by: N 308676 008003 |
- | A 352 990 07 04 |
| 009 | HEXAGON HEAD BOLT THRUST WASHER TO CRANKCASE TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C |
004 | N 308676 008003 |
| 011 | DRIVE GEAR WITH INJECTION PUMP MOUNTED INJECTION TIMING DEVICE TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C |
001 | A 352 077 00 14 |
| 013 | SPACER RING TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C |
001 | A 315 077 01 51 |
| 015 | WOODRUFF KEY TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C ON ELIMINATION OF INSULATING WASHERS 000 252 00 24 XHAUST PIPE 309 490 21 19;CONTINUED,SEE FOOTNOTE 12 |
001 | N 006888 006006 |
| 017 | CAMSHAFT GEAR TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C ON ELIMINATION OF INSULATING WASHERS 000 252 00 24 XHAUST PIPE 309 490 21 19;CONTINUED,SEE FOOTNOTE 12 |
001 | A 312 052 06 01 |
| LOCK THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Replaced by: N 000933 008177 |
- | A 352 052 00 73 | |
| 019 | SCREW Replaced by: N 304017 008024 |
- | N 000933 008177 |
| 019 | HEXAGON HEAD BOLT TO INJECTION PUMP HAVING THE BOSCH DESIGNATION PES-4A-80C,OR PES-4A-90C |
004 | N 304017 008024 |
| 021 | VALVE TAPPET STANDARD;27.98-27.99MM |
008 | A 352 054 05 01 |
| 021 | VALVE TAPPET REPAIR SIZE I;28.18-28.19 MM |
008 | A 352 054 06 01 |
| 021 | VALVE TAPPET REPAIR SIZE II;28.48-28.49 MM |
008 | A 352 054 07 01 |
| 021 | VALVE TAPPET REPAIR SIZE III;28.73-28.74 MM |
008 | A 352 054 08 01 |
| 023 | PUSH ROD INTAKE AND EXHAUST VALVES |
008 | A 352 054 02 05 |
| 025 | ROCKER ARM LEFT;WITH BUSHING,NOS.1,3,5,7 |
004 | A 366 050 04 33 |
| 027 | ROCKER ARM RIGHT;WITH BUSHING,NOS.2,4,6,8 |
004 | A 366 050 03 34 |
| 029 | BUSHING | 008 | A 322 055 01 50 |
| 031 | BALL PIN ROCKER ARM |
008 | A 312 055 03 21 |
| 033 | NUT BALL PIN TO ROCKER ARM |
008 | A 422 990 00 51 |
| 035 | SPRING LONG;ROCKER ARM SPACING |
003 | A 312 993 07 01 |
| 037 | ROCKER ARM SPINDLE | 001 | A 324 050 01 31 |
| 039 | WASHER | 002 | N 000470 014000 |
| 041 | ROCKER ARM BRACKET NO.1 |
001 | A 352 055 06 10 |
| 043 | ROCKER ARM BRACKET NO.2,NO.4 |
002 | A 352 055 04 10 |
| 045 | ROCKER SUPPORT Replaced by: A 352 055 02 10 |
- | A 366 055 03 10 |
| 045 | ROCKER ARM BRACKET NO.3 |
001 | A 352 055 02 10 |
| 047 | SCREW FROM ENGINE 451350 YEAR OF MANUFACTURE 1983 FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 Replaced by: A 366 990 01 04 |
- | A 312 055 01 71 |
| 047 | SCREW ROCKER SHAFT TO CYLINDER HEAD |
004 | A 366 990 01 04 |
| 049 | SCREW ROCKER SHAFT TO CYLINDER HEAD SEAL DURING ASSEMBLY |
001 | N 000931 012061 |
| 051 | GRUB SCREW ROCKER SHAFT TO ROCKER ARM SUPPORT UP TO ENGINE 408383 YEAR OF MANUFACTURE 1995 |
001 | N 000417 006001 |
| 051 | HEXAGON HEAD BOLT ROCKER SHAFT TO ROCKER ARM SUPPORT UP TO ENGINE 495695 YEAR OF MANUFACTURE 1987 |
001 | N 304017 005010 |
| 053 | SPRING SHORT;ROCKER ARM SPACING |
002 | A 312 993 00 05 |
| 055 | SPRING ROCKER SHAFT,FRONT AND REAR |
002 | A 312 993 00 25 |
| 057 | INTAKE VALVE AXLE BORE IN PRESSURE PLATE TO BE REAMED FROM 8.0MM TO 8.1MM FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 Replaced by: A 352 050 01 26 |
- | A 352 050 00 26 |
| 057 | INTAKE VALVE | 004 | A 352 050 01 26 |
| 059 | EXHAUST VALVE UP TO ENGINE 145136 YEAR OF MANUFACTURE 1975 EXCEPT FOR 145005-145008 UED, SEE FOOTNOTE 4 |
004 | A 321 053 07 05 |
| 059 | EXHAUST VALVE AXLE BORE IN PRESSURE PLATE TO BE REAMED FROM 8.0MM TO 8.1MM FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 Replaced by: A 366 050 05 27 |
- | A 366 050 00 27 |
| 059 | EXHAUST VALVE FROM ENGINE 145137-999999 YEAR OF MANUFACTURE 1975-1990 ALSO INSTALLED ON 145005-145008 EXCEPT FOR:145005-145008 YEAR OF MANUFACTURE 1976 FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 |
004 | A 366 050 05 27 |
| 063 | WASHER Replaced by: A 366 990 02 40 |
- | A 352 990 20 40 |
| 063 | WASHER VALVE SPRING |
008 | A 366 990 02 40 |
| 065 | VALVE SPRING UP TO ENGINE 451349 YEAR OF MANUFACTURE 1983 FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 Replaced by: A 352 053 03 20 |
- | A 322 053 04 20 |
| 065 | VALVE SPRING | 008 | A 352 053 03 20 |
| 067 | SPRING RETAINER (VALVE SPRING DISC) |
008 | A 322 053 01 25 |
| 069 | VALVE COLLET | 016 | A 312 053 01 27 |
| 069 | VALVE COLLET | 016 | A 366 053 00 26 |
| 069 | VALVE COLLET | 016 | A 343 053 70 27 |
| 071 | SHIM UP TO ENGINE 145136 YEAR OF MANUFACTURE 1976 EXCEPT FOR 145005-145008 ES: 1 EXHAUST PIPE 309 490 20 19;CONTINUED, SEE FOOTNOTE 6 FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 |
001 | A 352 055 01 86 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy