| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | SENDER UNIT OIL LEVEL Replaced by: A 001 153 11 32 |
001 | A 001 153 03 32 |
| 010 | OIL-BREAK SWITCH OIL LEVEL Replaced by: A 001 153 13 32 |
001 | A 001 153 11 32 |
| 010 | LIQUID LEVEL SWITCH OIL LEVEL |
001 | A 001 153 13 32 |
| 012 | O-RING TO A 001 153 13 32 CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
001 | A 012 997 73 45 |
| 012 | O-RING |
001 | A 027 997 95 45 |
| 020 | HEXALOBULAR BOLT OIL LEVEL CONTACTOR TO OIL PAN M6X19 |
002 | N 000000 001116 |
| 020 | HEXALOBULAR BOLT PLUG TO OIL PAN M6X19 |
001 | N 000000 001116 |
| 030 | TEMPERATURE SENSOR ON FRONT SIDE,REAR Replaced by: A 000 905 06 00 |
001 | A 004 153 97 28 |
| 030 | TEMPERATURE SENSOR ON FRONT SIDE,REAR Replaced by: A 099 905 37 00 |
001 | A 000 905 06 00 |
| 030 | TEMPERATURE SENSOR ON FRONT SIDE,REAR Replaced by: A 000 905 61 02 |
001 | A 099 905 37 00 |
| 030 | TEMPERATURE SENSOR ON FRONT SIDE,REAR |
001 | A 000 905 61 02 |
| 040 | SEAL RING | 001 | A 022 997 98 48 |
| 050 | BRACKET | 001 | A 272 078 02 41 |
| 055 | HEXALOBULAR BOLT BRACKET TO CYLINDER HEAD M6X16 |
001 | N 000000 001146 |
| 070 | SENDER UNIT CRANKSHAFT POSITION SENDER UNIT ME04 SIEHE: KG 15 TU 020 Replaced by: A 642 153 07 28 |
001 | A 004 153 87 28 |
| 070 | SENSOR CRANKSHAFT POSITION SENDER UNIT ME04 SIEHE: KG 15 TU 020 Replaced by: A 642 905 00 00 |
001 | A 642 153 07 28 |
| 070 | POSITION SENSOR CRANKSHAFT POSITION SENDER UNIT ME04 SIEHE: KG 15 TU 020 |
001 | A 642 905 00 00 |
| 075 | HEXALOBULAR BOLT POSITION SENDER UNIT TO CYLINDER CRANKCASE M6X16 |
001 | N 000000 001146 |
| 090 | PRESSURE SENSOR TO CYLINDER HEAD COVER RIGHT |
001 | A 005 153 50 28 |
| 090 | PRESSURE SENSOR TO CYLINDER HEAD COVER RIGHT |
001 | A 006 153 97 28 |
| 100 | SEAL RING | 001 | A 027 997 27 48 |
| 105 | HEXALOBULAR BOLT PRESSURE SENSOR ATTACHMENT M6X12 |
001 | N 910142 006000 |
| 110 | SENDER UNIT CAMSHAFT POSITION SENDER UNIT THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 272 905 01 43 |
004 | A 004 153 96 28 |
| 110 | POSITION SENSOR CAMSHAFT POSITION SENDER UNIT Replaced by: A 272 905 00 43 |
004 | A 272 905 01 43 |
| 110 | POSITION SENSOR CAMSHAFT POSITION SENDER UNIT |
004 | A 272 905 00 43 |
| 120 | SEAL RING THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 023 997 12 45 |
004 | A 022 997 25 48 |
| 120 | O-RING 17X2 |
004 | A 023 997 12 45 |
| 130 | HEXALOBULAR BOLT CAMSHAFT POSITION SENDER UNIT TO CYLINDER HEAD COVER M6X16 |
004 | N 910142 006001 |
| 140 | ELECTROMAGNET INTAKE CAMSHAFT ADJUSTER Replaced by: A 272 051 01 77 |
002 | A 272 051 00 77 |
| 140 | ELECTROMAGNET EXHAUST CAMSHAFT ADJUSTER Replaced by: A 272 051 01 77 |
002 | A 272 051 00 77 |
| 140 | ELECTROMAGNET EXHAUST CAMSHAFT ADJUSTER |
002 | A 272 051 01 77 |
| 140 | ELECTROMAGNET INTAKE CAMSHAFT ADJUSTER |
002 | A 272 051 01 77 |
| 145 | O-RING INTAKE |
002 | A 019 997 37 45 |
| 145 | O-RING EXHAUST Replaced by: A 019 997 37 45 |
002 | A 017 997 36 45 |
| 145 | O-RING EXHAUST |
002 | A 019 997 37 45 |
| 150 | HEXALOBULAR BOLT SOLENOID TO COVER,FRONT M6X16 |
006 | N 910142 006001 |
| 180 | KNOCK SENSOR TO CRANIKCASE |
002 | A 004 153 90 28 |
| 190 | HEXALOBULAR BOLT KNOCK SENSOR ON CRANKCASE |
002 | N 910142 008009 |
| 200 | CHANGE-OVER VALVE AIR INJECTION Replaced by: A 002 540 70 97 |
001 | A 002 540 14 97 |
| 200 | CHANGE-OVER VALVE AIR INJECTION |
001 | A 002 540 70 97 |
| 210 | SIEVE INSERT CHANGE-OVER VALVE |
001 | A 117 078 09 81 |
| 220 | SENDER UNIT COMBINED OIL FILTER/OIL COOLER |
001 | A 005 153 06 28 |
| 900 | PIN BUSHING HOUSING HALL-TYPE SENSOR CAMSHAFT 3-PIN SLK2.8;B6/4-B6/7 |
004 | A 203 545 30 28 |
| 900 | COVER CAP | 004 | A 000 545 25 84 |
| 901 | FEMALE CONTACT 0.75-1.0 MM2 SLK2.8 |
NB | A 009 545 81 26 |
| 901 | GASKET 1.1-2.1 MM |
NB | A 000 545 71 80 |
| 902 | PIN BUSHING HOUSING CRANKSHAFT POSITION SENDER UNIT 3-PIN SLK2.8;L5 |
001 | A 203 545 30 28 |
| 902 | COVER CAP | 001 | A 000 545 25 84 |
| 903 | FEMALE CONTACT 0.75-1.0 MM2 SLK2.8 |
NB | A 009 545 81 26 |
| 903 | GASKET 1.1-2.1 MM |
NB | A 000 545 71 80 |
| 904 | CLUTCH HOUSING MAGNETIC ACTUATOR, CAMSHAFT CONTROL 2-PIN MLK1.2;Y49/4-Y49/7 |
004 | A 022 545 19 26 |
| 905 | CRIMP RECEPTACLE CONTACT 0.75-1.0 MM2 MLK1.2S |
NB | A 000 982 30 26 |
| 905 | SINGLE-WIRE SEAL 0.22-1.0 MM2 |
NB | A 001 545 50 80 |
| 906 | CLUTCH | 001 | A 022 545 22 26 |
| 906 | CLUTCH | 001 | A 022 545 22 26 |
| 907 | CRIMP RECEPTACLE CONTACT 0.1-0.22 MM2 MLK1.2S |
NB | A 000 982 27 26 |
| 907 | CRIMP RECEPTACLE CONTACT 0.1-0.22 MM2 MLK1.2S |
NB | A 000 982 27 26 |
| 907 | SINGLE-WIRE SEAL 0.22-1.0 MM2 |
NB | A 001 545 50 80 |
| 907 | SINGLE-WIRE SEAL 0.22-1.0 MM2 |
NB | A 001 545 50 80 |
| 907 | BLIND PLUG | NB | A 001 545 59 80 |
| 907 | BLIND PLUG | NB | A 001 545 59 80 |
| 908 | PIN BUSHING HOUSING AIR INJECTION 2-PIN MQS;Y59/2 |
001 | A 210 540 20 81 |
| 909 | ELECTRICAL CABLE 0.5 MM2 MQS CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
NB | A 000 540 23 05 |
| 909 | ELECTRICAL CABLE 0.75 MM2 MQS CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
NB | A 000 540 24 05 |
| 909 | GASKET 0.9-1.4 MM |
NB | A 000 545 68 80 |
| 910 | PIN BUSHING HOUSING REFRIGERANT TEMPERATURE SENDER UNIT 2-PIN MQS;B11/4 |
001 | A 210 540 20 81 |
| 911 | ELECTRICAL CABLE 0.5 MM2 MQS CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
NB | A 000 540 23 05 |
| 911 | GASKET 0.9-1.4 MM |
NB | A 000 545 68 80 |
| 912 | CLUTCH 3-PIN MQS |
001 | A 210 540 21 81 |
| 913 | ELECTRICAL CABLE 0.5 MM2 MQS CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
NB | A 000 540 23 05 |
| 913 | GASKET 0.9-1.4 MM |
NB | A 000 545 68 80 |
| 914 | PLUG KNOCK SENSOR 2-PIN SLK2.8;A16/1;A16/2 |
002 | A 203 545 05 28 |
| 915 | FEMALE CONTACT 0.75-1.0 MM2 SLK2.8 |
NB | A 009 545 81 26 |
| 915 | GASKET 1.1-2.1 MM |
NB | A 000 545 71 80 |
| 916 | CLUTCH | 001 | A 022 545 22 26 |
| 916 | CLUTCH | 001 | A 022 545 22 26 |
| 917 | CRIMP RECEPTACLE CONTACT 0.1-0.22 MM2 MLK1.2S |
NB | A 000 982 27 26 |
| 917 | CRIMP RECEPTACLE CONTACT 0.1-0.22 MM2 MLK1.2S |
NB | A 000 982 27 26 |
| 917 | BLIND PLUG | NB | A 001 545 59 80 |
| 917 | BLIND PLUG | NB | A 001 545 59 80 |
| 917 | SINGLE-WIRE SEAL 0.22-1.0 MM2 |
NB | A 001 545 50 80 |
| 917 | SINGLE-WIRE SEAL 0.22-1.0 MM2 |
NB | A 001 545 50 80 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy