WHEELHOUSE,FRONT SUBFRAME

EPC / Mercedes / Car / FG / FG 204.006 / 62 / 030
‹ ›

№- Name A* Part number
010 SIDE MEMBER
LEFT

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.
SEE WIS FOR REPAIR INSTRUCTIONS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
===================================================================================================

CAUTION!WHEN ORDERING THE BODY IN WHITE PLEASE REMEMBER ONLY THE CURRENT PRODUCTION STANDARD CAN BE MANUFACTURED IN THE PLANT
WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH

ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.

CAUTION: CHECK TYPE OF BRAKE DISKS INSTALLED (FRICTION SURFACE) BEFORE ORDERING 		001 A 204 620 43 34
010 LONGITUDINAL MEMBER
LEFT

IMPORTANT: PART ONLY VALID W/ CODE 808/809/800/801

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.

NOTE SERVICE INFORMATION IN WIS WIS-NET#SI98.00-P-0022A#

NOTE SERVICE INFORMATION IN WIS WIS-NET#SI98.00-P-0022A#

UPON EXCHANGING SPRING, ALWAYS REPLACE LOWER SPRING SEAL
Replaced by: A 204 620 01 50 		001 A 204 620 61 34
010 WHEEL HOUSE
LEFT

IMPORTANT: PART ONLY VALID W/ CODE 808/809/800/801

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.

NOTE SERVICE INFORMATION IN WIS WIS-NET#SI98.00-P-0022A#

NOTE SERVICE INFORMATION IN WIS WIS-NET#SI98.00-P-0022A#

UPON EXCHANGING SPRING, ALWAYS REPLACE LOWER SPRING SEAL 		001 A 204 620 01 50
020 COVER
LEFT

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.
SEE WIS FOR REPAIR INSTRUCTIONS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
===================================================================================================

CAUTION!WHEN ORDERING THE BODY IN WHITE PLEASE REMEMBER ONLY THE CURRENT PRODUCTION STANDARD CAN BE MANUFACTURED IN THE PLANT
WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH

ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS


IMPORTANT: ALSO ORDER BRAKE PEDAL COVER 		001 A 204 620 11 67
020 COVER LONGITUDINAL MEMBER
LEFT

IMPORTANT: PART ONLY VALID W/ CODE 808/809/800/801

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.

NOTE SERVICE INFORMATION IN WIS WIS-NET#SI98.00-P-0022A#

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.
001 A 204 620 15 67
030 SIDE MEMBER
LEFT 		001 A 204 620 45 34
035 ANGLE
LEFT SIDE MEMBER 		001 A 204 626 13 12
050 BRACKET
LEFT 		001 A 204 620 03 14
060 STRIKING PLATE
LEFT
Replaced by: A 204 620 05 87 		001 A 204 626 07 52
060 LONGITUDINAL MEMBER
LEFT 		001 A 204 620 05 87
065 BRACKET
LEFT REAR FENDER 		001 A 204 889 01 14
070 LONGITUDINAL MEMBER
TOP LEFT 		001 A 204 630 19 40
075 PLATE
ON UPPER CARRIER 		003 A 202 626 07 11
078 SEAL
LEFT UPPER CARRIER 		001 A 204 626 19 52
080 CROSS MEMBER
LEFT, PEDAL FLOOR PANEL 		001 A 204 626 05 55
090 STRUT
LEFT 		001 A 204 630 63 40
100 SIDE MEMBER
RIGHT

ALSO ORDER INCLUDED ANCILLARY PARTS WITH COLOR VARIANT ES2
Replaced by: A 204 620 02 50 		001 A 204 620 42 34
100 WHEEL HOUSE
RIGHT

ALSO ORDER INCLUDED ANCILLARY PARTS WITH COLOR VARIANT ES2 		001 A 204 620 02 50
110 COVER
RIGHT 		001 A 204 620 12 67
120 SIDE MEMBER
RIGHT 		001 A 204 620 44 34
125 ANGLE
RIGHT SIDE MEMBER 		001 A 204 626 13 12
140 BRACKET
RIGHT
Replaced by: A 204 620 19 14 		001 A 204 620 04 14
140 BRACKET
RIGHT 		001 A 204 620 19 14
150 STRIKING PLATE
RIGHT
Replaced by: A 204 620 06 87 		001 A 204 626 08 52
150 LONGITUDINAL MEMBER
RIGHT 		001 A 204 620 06 87
155 BRACKET
RIGHT REAR FENDER 		001 A 204 889 02 14
160 LONGITUDINAL MEMBER
TOP RIGHT 		001 A 204 630 20 40
165 PLATE
ON UPPER CARRIER 		003 A 202 626 07 11
168 SEAL
RIGHT UPPER CARRIER 		001 A 204 626 20 52
170 CROSS MEMBER
RIGHT, PEDAL FLOOR PANEL 		001 A 204 626 06 55
180 STRUT
RIGHT 		001 A 204 630 64 40
300 SUPPORT
INTEGRAL SUPPORT
Replaced by: A 204 628 07 57 		001 A 204 628 05 57
300 INTEGRAL CARRIER
Replaced by: A 204 628 09 57 		001 A 204 628 07 57
300 INTEGRAL CARRIER 001 A 204 628 09 57
300 INTEGRAL CARRIER 001 A 204 628 10 57
300 INTEGRAL CARRIER 001 A 204 628 06 57
310 BLIND CLINCH NUT
IN FRAME-TYPE INTEGRAL SUPPORT M10 		002 A 000 990 49 59
320 PLATE
STEERING TO FRAME-TYPE INTEGRAL SUPPORT 		001 A 204 628 00 11
320 MOUNTING PLATE
STEERING TO FRAME-TYPE INTEGRAL SUPPORT 		001 A 212 628 04 11
330 SUPPORT
INTEGRAL SUPPORT 		002 A 204 628 01 26
340 BOLT
FRONT FRAME-TYPE INTEGRAL SUPPORT M14X1,5-SGX50 		002 A 000 990 14 11
350 BOLT
REAR FRAME-TYPE INTEGRAL SUPPORT M14X1,5-SGX100 		002 A 000 990 15 11
360 NUT
SUPPORT AT BODY M12X1.5

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.

002 N 913023 012002
360 HEXALOBULAR BOLT
SUPPORT AT BODY M12X1,5X30

MUST BE PAINTED BEFORE INSTALL. IN 7167 (DEEP DARK GRAY)

OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#AR88.20-P-2200-01CW#
ATTENTION: ORDER WASHER AS WELL
002 N 910143 012008
370 HEXAGON HEAD BOLT
PLATE TO FRAME-TYPE INTEGRAL SUPPORT M12X1.5X20 		002 N 910105 012003
370 HEXAGON HEAD BOLT
PLATE TO FRAME-TYPE INTEGRAL SUPPORT M10X25 		004 N 910105 010009
380 NUT
SUPPORT AT FRAME-TYPE INTEGRAL SUPPORT M12X1.5 		002 N 913023 012002
400 BRACKET
TO FRAME-TYPE INTEGRAL SUPPORT 		001 A 204 545 45 40
410 BOLT
BRACKET TO FRAME TYPE INTEGRAL SUPPORT M6X12 		001 A 000 990 16 17
450 DEFLECTOR RAMP
LEFT 		001 A 204 628 01 08
450 DEFLECTOR RAMP
RIGHT 		001 A 204 628 00 08
500 BOLT
REPAIR SOLUTION FOR RUPTURED WELDED PINS 		NB A 000 990 12 10
510 WELD STUD
GROUND CONNECTION M6 		001 A 000 991 01 03
510 WELD STUD
GROUND CONNECTION M8 		001 A 000 991 03 03
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA