| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | DOOR SHELL LEFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== CAUTION!WHEN ORDERING THE BODY IN WHITE PLEASE REMEMBER ONLY THE CURRENT PRODUCTION STANDARD CAN BE MANUFACTURED IN THE PLANT WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS ALSO ORDER INCLUDED ANCILLARY PARTS WITH COLOR VARIANT ES2 UPON EXCHANGING SPRING, ALWAYS REPLACE LOWER SPRING SEAL Replaced by: A 204 730 21 00 |
001 | A 204 730 01 05 |
| 010 | REAR DOOR LEFT NOTE SERVICE INFORMATION IN WIS WIS-NET#SI72.00-P-0008A# IMPORTANT: PART ONLY VALID W/ CODE 808/809/800/801 |
001 | A 204 730 21 00 |
| 010 | DOOR SHELL LEFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. NOTE SERVICE INFORMATION IN WIS WIS-NET#SI72.00-P-0008A# Replaced by: A 204 730 21 00 |
001 | A 204 730 01 05 |
| 010 | REAR DOOR LEFT NOTE SERVICE INFORMATION IN WIS WIS-NET#SI72.00-P-0008A# IMPORTANT: PART ONLY VALID W/ CODE 808/809/800/801 |
001 | A 204 730 21 00 |
| 010 | DOOR SHELL RIGHT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== CAUTION!WHEN ORDERING THE BODY IN WHITE PLEASE REMEMBER ONLY THE CURRENT PRODUCTION STANDARD CAN BE MANUFACTURED IN THE PLANT WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS ALSO ORDER INCLUDED ANCILLARY PARTS WITH COLOR VARIANT ES2 UPON EXCHANGING SPRING, ALWAYS REPLACE LOWER SPRING SEAL Replaced by: A 204 730 22 00 |
001 | A 204 730 02 05 |
| 010 | REAR DOOR RIGHT NOTE SERVICE INFORMATION IN WIS WIS-NET#SI72.00-P-0008A# IMPORTANT: PART ONLY VALID W/ CODE 808/809/800/801 |
001 | A 204 730 22 00 |
| 010 | DOOR SHELL RIGHT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. NOTE SERVICE INFORMATION IN WIS WIS-NET#SI72.00-P-0008A# Replaced by: A 204 730 22 00 |
001 | A 204 730 02 05 |
| 010 | REAR DOOR RIGHT NOTE SERVICE INFORMATION IN WIS WIS-NET#SI72.00-P-0008A# IMPORTANT: PART ONLY VALID W/ CODE 808/809/800/801 |
001 | A 204 730 22 00 |
| 020 | PLUG ROUND LATCH FOR LOCK CYLINDER ACCESS HOLE, LEFT |
001 | A 000 998 15 50 |
| 020 | PLUG ROUND LATCH FOR LOCK CYLINDER ACCESS HOLE, RIGHT |
001 | A 000 998 15 50 |
| 030 | HINGE TOP LEFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 204 730 10 37 |
| 030 | HINGE TOP RIGHT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 204 730 11 37 |
| 050 | BOLT FOR CONNECTION OF LEFT HINGE LEAVES ATTENTION: ORDER WASHER AS WELL MUST BE PAINTED BEFORE INSTALL. IN 7167 (DEEP DARK GRAY) OBSERVE WIS |
001 | A 013 990 21 01 |
| 050 | BOLT W FLANGE FOR CONNECTION OF LEFT HINGE LEAVES ALSO REPLACE RESERVOIR ATTENTION: ORDER WASHER AS WELL NOTE WORK INSTRUCTIONS IN WIS WIS-NET#AZ82.20-P-0001CW# OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# ATTENTION: ORDER WASHER AS WELL |
001 | A 019 990 43 01 |
| 050 | BOLT FOR CONNECTION OF RIGHT HINGE LEAVES ATTENTION: ORDER WASHER AS WELL MUST BE PAINTED BEFORE INSTALL. IN 7167 (DEEP DARK GRAY) OBSERVE WIS |
001 | A 013 990 21 01 |
| 050 | BOLT W FLANGE FOR CONNECTION OF RIGHT HINGE LEAVES ALSO REPLACE RESERVOIR ATTENTION: ORDER WASHER AS WELL NOTE WORK INSTRUCTIONS IN WIS WIS-NET#AZ82.20-P-0001CW# OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# ATTENTION: ORDER WASHER AS WELL |
001 | A 019 990 43 01 |
| 070 | HINGE BOTTOM LEFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 204 730 12 37 |
| 070 | HINGE BOTTOM RIGHT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 204 730 13 37 |
| 080 | BOLT FOR CONNECTION OF LEFT HINGE LEAVES ATTENTION: ORDER WASHER AS WELL MUST BE PAINTED BEFORE INSTALL. IN 7167 (DEEP DARK GRAY) OBSERVE WIS |
001 | A 013 990 21 01 |
| 080 | BOLT W FLANGE FOR CONNECTION OF LEFT HINGE LEAVES ALSO REPLACE RESERVOIR ATTENTION: ORDER WASHER AS WELL NOTE WORK INSTRUCTIONS IN WIS WIS-NET#AZ82.20-P-0001CW# OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# ATTENTION: ORDER WASHER AS WELL |
001 | A 019 990 43 01 |
| 080 | BOLT FOR CONNECTION OF RIGHT HINGE LEAVES ATTENTION: ORDER WASHER AS WELL MUST BE PAINTED BEFORE INSTALL. IN 7167 (DEEP DARK GRAY) OBSERVE WIS |
001 | A 013 990 21 01 |
| 080 | BOLT W FLANGE FOR CONNECTION OF RIGHT HINGE LEAVES ALSO REPLACE RESERVOIR ATTENTION: ORDER WASHER AS WELL NOTE WORK INSTRUCTIONS IN WIS WIS-NET#AZ82.20-P-0001CW# OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# ATTENTION: ORDER WASHER AS WELL |
001 | A 019 990 43 01 |
| 100 | BOLT FOR HINGE AT LEFT DOOR M8X35 |
004 | A 230 984 01 29 |
| 100 | BOLT FOR HINGE AT RIGHT DOOR M8X35 |
004 | A 230 984 01 29 |
| 110 | MULTIPLE NUT FOR HINGE TO B-PILLAR AT LEFT M8 |
004 | A 002 990 84 50 |
| 110 | MULTIPLE NUT FOR HINGE TO B-PILLAR AT RIGHT M8 |
004 | A 002 990 84 50 |
| 120 | CAP FOR SCREW COVER AT LEFT |
002 | A 000 987 79 45 |
| 120 | CAP FOR SCREW COVER AT RIGHT |
002 | A 000 987 79 45 |
| 150 | LEDGE LEFT BOTTOM CAUTION!WHEN ORDERING THE BODY IN WHITE PLEASE REMEMBER ONLY THE CURRENT PRODUCTION STANDARD CAN BE MANUFACTURED IN THE PLANT WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS ALSO ORDER INCLUDED ANCILLARY PARTS WITH COLOR VARIANT ES2 UPON EXCHANGING SPRING, ALWAYS REPLACE LOWER SPRING SEAL OBSERVE WIS |
001 | A 204 690 39 62 |
| 150 | LEDGE RIGHT BOTTOM CAUTION!WHEN ORDERING THE BODY IN WHITE PLEASE REMEMBER ONLY THE CURRENT PRODUCTION STANDARD CAN BE MANUFACTURED IN THE PLANT WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH ALSO USE: 2 X A 211 333 06 97 BOOT, OBSERVE WIS ALSO ORDER INCLUDED ANCILLARY PARTS WITH COLOR VARIANT ES2 UPON EXCHANGING SPRING, ALWAYS REPLACE LOWER SPRING SEAL OBSERVE WIS |
001 | A 204 690 40 62 |
| 160 | ORNAMENTAL COVER B-PILLAR OUTSIDE LEFT |
001 | A 204 690 03 87 |
| 160 | ORNAMENTAL COVER B-PILLAR OUTSIDE RIGHT |
001 | A 204 690 04 87 |
| 160 | ORNAMENTAL COVER B-PILLAR OUTSIDE LEFT |
001 | A 204 690 21 87 |
| 160 | ORNAMENTAL COVER B-PILLAR OUTSIDE RIGHT |
001 | A 204 690 22 87 |
| 165 | COVER BETWEEN DECORATIVE STRIP AND LEFTB-PILLAR |
001 | A 204 737 01 88 |
| 165 | COVER BETWEEN DECORATIVE STRIP AND RIGHTB-PILLAR |
001 | A 204 737 02 88 |
| 170 | SPREADER NUT LEFT COVER MOUNTING |
003 | A 000 998 33 85 |
| 170 | SPREADER NUT RIGHT COVER MOUNTING |
003 | A 000 998 33 85 |
| 180 | SCREW LEFT COVER MOUNTING |
003 | N 000000 004778 |
| 180 | SCREW RIGHT COVER MOUNTING |
003 | N 000000 004778 |
| 200 | GASKET LEFT DOOR SEAL TO BE ADAPTED DURING ASSEMBLY Replaced by: A 204 727 11 87 |
001 | A 204 727 03 87 |
| 200 | CIRCUMFERENTIAL DOOR SEAL LEFT DOOR SEAL TO BE ADAPTED DURING ASSEMBLY |
001 | A 204 727 11 87 |
| 200 | GASKET RIGHT DOOR SEAL TO BE ADAPTED DURING ASSEMBLY Replaced by: A 204 727 11 87 |
001 | A 204 727 03 87 |
| 200 | CIRCUMFERENTIAL DOOR SEAL RIGHT DOOR SEAL TO BE ADAPTED DURING ASSEMBLY |
001 | A 204 727 11 87 |
| 300 | INSULATION AT LEFT PANELING 500X100MM TO BE ADAPTED DURING ASSEMBLY |
001 | A 204 682 01 08 |
| 300 | INSULATION AT RIGHT PANELING 500X100MM TO BE ADAPTED DURING ASSEMBLY |
001 | A 204 682 01 08 |
| 300 | INSULATION AT LEFT PANELING 40X20MM |
002 | A 204 682 04 08 |
| 300 | INSULATION AT RIGHT PANELING 40X20MM |
002 | A 204 682 04 08 |
| 320 | SOUNDPROOFING AT LEFT PANELING |
001 | A 204 682 05 08 |
| 320 | SOUNDPROOFING AT RIGHT PANELING |
001 | A 204 682 06 08 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy