EXHAUST SYSTEM USED ON SIX-CYLINDER GASOLINE VEHICLES
| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | EXHAUST LINE FRONT LEFT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 490 65 20 |
| 010 | EXHAUST LINE FRONT LEFT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 490 03 81 |
001 | A 221 490 75 20 |
| 010 | EXHAUST SYSTEM FRONT LEFT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 490 03 81 |
| 020 | EXHAUST LINE FRONT RIGHT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 490 66 20 |
| 020 | EXHAUST LINE FRONT RIGHT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH WITH HEAT MAT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 490 04 81 |
001 | A 221 490 76 20 |
| 020 | EXHAUST SYSTEM FRONT RIGHT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 490 04 81 |
| 030 | BOLT AND WASHER ASSY. PRE-CATALYST TO EXHAUST MANIFOLD M8 X 55 |
004 | A 170 990 00 10 |
| 040 | BRACKET LEFT |
001 | A 221 492 81 41 |
| 050 | BRACKET RIGHT |
001 | A 221 492 82 41 |
| 055 | HEXALOBULAR BOLT BRACKET MOUNTING LEFT & RIGHT M8X20 |
004 | N 000000 000276 |
| 060 | MOUNTING PLATE EXHAUST SYSTEM TO TRANSMISSION THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. |
001 | A 221 492 03 18 |
| 065 | NUT EXHAUST SYSTEM TO TRANSMISSION M8 |
002 | A 129 990 04 58 |
| 110 | BRACKET IN TUNNEL REAR, LEFT |
001 | A 221 492 39 41 |
| 120 | BRACKET IN TUNNEL REAR, RIGHT |
001 | A 221 492 40 41 |
| 130 | SUSPENSION RING LEFT AND RIGHT |
002 | A 124 492 00 44 |
| 200 | LAMBDA PROBE LEFT CONTROL PROBE IN FRONT OF CATALYST |
001 | A 008 542 30 18 |
| 200 | LAMBDA PROBE RIGHT CONTROL PROBE IN FRONT OF CATALYST |
001 | A 008 542 30 18 |
| 200 | TEMPERATURE SENSOR EXHAUST TEMPERATURE SENSOR UPSTREAM OF CATALYTIC CONVERTER B16 ALSO ORDER: A 221 830 17 61 SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
002 | A 007 153 88 28 |
| 200 | TEMPERATURE SENSOR EXHAUST TEMPERATURE SENSOR UPSTREAM OF CATALYTIC CONVERTER B16 ADDITIONALLY ORDER: A 000 989 06 88 07 |
002 | A 000 905 90 00 |
| 200 | TEMPERATURE SENSOR EXHAUST TEMPERATURE SENSOR UPSTREAM OF CATALYTIC CONVERTER B16 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
002 | A 000 905 75 01 |
| 210 | CLIP TEMPERATURE SENSOR 18.0X18.5 MM ADDITIONALLY ORDER: A 000 989 06 88 07 |
002 | A 000 546 20 75 |
| 220 | LAMBDA PROBE LEFT DIAGNOSIS PROBE BEHIND CATALYST |
001 | A 008 542 33 18 |
| 220 | LAMBDA PROBE RIGHT DIAGNOSIS PROBE BEHIND CATALYST |
001 | A 008 542 33 18 |
| 225 | NUT NOX SENSOR DOWNSTREAM OF TWC OBSERVE WIS |
004 | A 000 990 36 62 |
| 225 | HEXAGON NUT W COLLAR NOX SENSOR DOWNSTREAM OF TWC 5 MM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
004 | A 210 990 01 50 |
| 230 | SPRING CLAMP 02 SENSOR TO TRANSMISSION 28X24 MM |
002 | A 000 991 01 70 |
| 240 | SPRING CLAMP O2 SENSOR CONNECTOR |
002 | A 000 991 43 70 |
| 250 | BRACKET TO TRANSMISSION BELL |
001 | A 221 546 74 43 |
| 255 | CLIP | 001 | A 011 988 55 78 |
| 260 | NOX SENSOR DOWNSTREAM OF SCR CATALYTIC CONVERTER L=815MM;N37/5; N37/6 Replaced by: A 000 905 71 00 |
002 | A 000 905 29 00 |
| 260 | NOX SENSOR DOWNSTREAM OF SCR CATALYTIC CONVERTER L=815MM;N37/5; N37/6 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 000 905 36 03 |
002 | A 000 905 71 00 |
| 260 | NOX SENSOR DOWNSTREAM OF SCR CATALYTIC CONVERTER L=815MM;N37/5; N37/6 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 000 905 63 04 |
002 | A 000 905 36 03 |
| 260 | NOX SENSOR DOWNSTREAM OF SCR CATALYTIC CONVERTER N37/5; N37/6 |
002 | A 000 905 63 04 |
| 270 | HEXALOBULAR BOLT BRACKET ON TRANSMISSION BELL M8X16 |
001 | N 000000 003853 |
| 280 | VIBRATION ABSORBER LEFT |
001 | A 221 491 08 47 |
| 280 | VIBRATION ABSORBER RIGHT |
001 | A 221 491 08 47 |
| 290 | HEXAGON HEAD BOLT FASTENING, VIBRATION DAMPER AT LEFT M8X16 |
002 | N 910105 008008 |
| 290 | HEXAGON HEAD BOLT FASTENING, VIBRATION DAMPER AT RIGHT M8X16 |
002 | N 910105 008008 |
| 300 | EXHAUST LINE CENTRAL MUFFLER |
001 | A 221 490 95 21 |
| 310 | EXHAUST GAS LINE REAR LEFT |
001 | A 221 490 61 59 |
| 310 | EXHAUST GAS LINE REAR LEFT |
001 | A 221 490 63 59 |
| 320 | EXHAUST GAS LINE REAR RIGHT |
001 | A 221 490 92 59 |
| 320 | EXHAUST GAS LINE REAR RIGHT |
001 | A 221 490 93 59 |
| 340 | CLAMP CENTRAL MUFFLER TO POSTERIOR MUFFLER |
001 | A 000 995 45 35 |
| 350 | CLAMP REAR LEFT EXHAUST PIPE 65 MM |
001 | A 000 490 12 41 |
| 360 | CLAMP TO CENTER MUFFLER 60 MM |
002 | A 000 490 13 41 |
| 370 | PLATE ON REAR SUBFRAME |
002 | A 230 490 00 44 |
| 380 | SUSPENSION RING ON REAR SUBFRAME |
002 | A 230 492 04 44 |
| 390 | HEXAGON HEAD BOLT ATTACHMENT PLATE M8X16 |
004 | N 910105 008008 |
| 400 | WEB CONNECTION OF EXHAUST PIPES WITH EACH OTHER ALSO ORDER: TERMINAL BLOCK 2 X A 001 546 99 41; CABLE TIE 5 X A 002 997 24 90 SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== Replaced by: A 221 490 00 95 |
001 | A 221 492 05 95 |
| 400 | STRUT CONNECTION OF EXHAUST PIPES WITH EACH OTHER ALSO ORDER: TERMINAL BLOCK 2 X A 001 546 99 41; CABLE TIE 5 X A 002 997 24 90 SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
001 | A 221 490 00 95 |
| 420 | NUT TO CONNECTING PIECE M8 |
002 | A 129 990 04 58 |
| 430 | SUSPENSION RING REAR ON BODYSHELL |
004 | A 202 492 03 44 |
| 440 | BRACKET POSTERIOR MUFFLER |
002 | A 221 492 02 42 |
| 450 | HEXAGON HEAD BOLT LEFT AND RIGHT REAR MUFFLER BRACKETS TO BODY M8X16 |
004 | N 910105 008008 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy