| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | COVER F ENGINE COMP. BM FRONT |
001 | A 207 524 09 30 |
| 020 | BRACKET LEFT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== IMPORTANT! FOR CONVERSION TO 18 INCH WHEELS, THE TIRE ROD RETROFIT KIT MUST ALSO BE ORDERED! Replaced by: A 207 524 07 40 |
001 | A 207 524 01 40 |
| 020 | BRACKET LEFT |
001 | A 207 524 07 40 |
| 030 | BRACKET RIGHT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== IMPORTANT! FOR CONVERSION TO 18 INCH WHEELS, THE TIRE ROD RETROFIT KIT MUST ALSO BE ORDERED! Replaced by: A 207 524 08 40 |
001 | A 207 524 02 40 |
| 030 | BRACKET RIGHT |
001 | A 207 524 08 40 |
| 040 | BOLT BRACKET LEFT AND RIGHT AT FLEXIBLE CROSSMEMBER M6X19 |
004 | A 001 990 80 00 |
| 060 | ENCAPSULATION CENTRAL |
001 | A 204 520 28 23 |
| 060 | COVER F ENGINE COMP. BM CENTRAL |
001 | A 212 524 15 30 |
| 060 | COVER F ENGINE COMP. BM CENTRAL |
001 | A 212 524 15 30 |
| 100 | COVER F ENGINE COMP. BM REAR FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 204 524 28 30 |
| 100 | COVER F ENGINE COMP. BM REAR |
001 | A 204 524 32 30 |
| 110 | BRACKET LEFT |
001 | A 204 524 03 40 |
| 110 | BRACKET LEFT |
001 | A 204 524 25 40 |
| 110 | BRACKET RIGHT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 204 524 15 40 |
| 110 | BRACKET RIGHT NOT SUITABLE FOR VEHICLES WITH XENON HEADLAMPS |
001 | A 204 524 24 40 |
| 110 | BRACKET | 001 | A 204 524 28 40 |
| 130 | HEXAGON NUT W COLLAR BRACKET AT LEFT MAIN FLOOR 5 MM |
002 | A 210 990 01 50 |
| 130 | HEXAGON NUT W COLLAR BRACKET AT RIGHT MAIN FLOOR 5 MM |
002 | A 210 990 01 50 |
| 150 | SHEET METAL SCREW REAR PANEL TO BRACKET 4.8X19 |
002 | A 001 990 60 36 |
| 150 | SHEET METAL SCREW REAR PANEL TO WHEELHOUSE LINER 4.8X19 |
002 | A 001 990 60 36 |
| 150 | SHEET METAL SCREW REAR PANEL TO LONGITUDINAL MEMBER 4.8X19 |
004 | A 001 990 60 36 |
| 150 | SHEET METAL SCREW FRONT TRIM TO FRAME-TYPE INTEGRALSUPPORT 4.8X19 |
006 | A 001 990 60 36 |
| 150 | SHEET METAL SCREW CENTRAL COVERING TO FRAME-TYPE INTEGRAL SUPPORT 4.8X19 |
002 | A 001 990 60 36 |
| 160 | CLIP-TYPE NUT REAR PANEL TO BRACKET 4,8 |
002 | A 004 994 31 45 |
| 160 | CLIP-TYPE NUT REAR PANEL TO WHEELHOUSE LINER 4,8 |
002 | A 004 994 31 45 |
| 160 | CLIP-TYPE NUT REAR PANEL TO LONGITUDINAL MEMBER |
004 | A 001 994 98 45 |
| 160 | CLIP-TYPE NUT FRONT TRIM TO FRAME-TYPE INTEGRALSUPPORT 4,8 |
006 | A 004 994 31 45 |
| 160 | CLIP-TYPE NUT CENTRAL COVERING TO FRAME-TYPE INTEGRAL SUPPORT 4,8 |
002 | A 004 994 31 45 |
| 170 | SCREW-AND-WASHER ASSEMBLY PROTECTIVE SHIELD TO FRAME-TYPE INTEGRAL SUPPORT, FRONT M8X30 |
004 | N 000000 001410 |
| 170 | HEXAGON HEAD BOLT PROTECTIVE SHIELD TO FRAME-TYPE INTEGRAL SUPPORT, REAR M8X25 RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
002 | N 304017 008034 |
| 170 | SCREW-AND-WASHER ASSEMBLY PROTECTIVE SHIELD TO FRAME-TYPE INTEGRAL SUPPORT, REAR M8X30 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
002 | N 000000 001410 |
| 180 | SPRING NUT PROTECTIVE SHIELD TO FRAME-TYPE INTEGRAL SUPPORT, FRONT M8 |
004 | A 004 994 18 45 |
| 180 | SPRING NUT PROTECTIVE SHIELD TO FRAME-TYPE INTEGRAL SUPPORT, REAR M8 |
002 | A 004 994 18 45 |
| 200 | STRUT BETWEEN LONGITUDINAL MEMBER ANDFRAME-TYPE INTEGRAL SUPPORT |
002 | A 207 524 00 47 |
| 210 | HEXAGON HEAD BOLT STRUT TO SIDE MEMBER M10X20 |
002 | N 000000 005053 |
| 220 | BOLT STRUT TO FRAME-TYPE INTEGRAL SUPPORT |
002 | A 001 990 40 03 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy