| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | FUEL TANK THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== IMPORTANT! FOR CONVERSION TO 18 INCH WHEELS, THE TIRE ROD RETROFIT KIT MUST ALSO BE ORDERED! Replaced by: A 204 470 38 02 |
001 | A 204 470 75 01 |
| 010 | FUEL TANK | 001 | A 204 470 38 02 |
| 010 | FUEL TANK | 001 | A 204 470 38 02 |
| 050 | FUEL DELIVERY MODULE IN TANK AT RIGHT WITH FUEL LINES |
001 | A 204 470 22 94 |
| 050 | FUEL DELIVERY MODULE IN TANK AT RIGHT WITH FUEL LINES |
001 | A 212 470 35 94 |
| 060 | SENDER UNIT DELIVERY UNIT |
001 | A 204 540 06 17 |
| 100 | FUEL PUMP IN TANK AT LEFT WITHOUT FUEL LINES |
001 | A 204 470 06 94 |
| 110 | SENDER UNIT DELIVERY UNIT |
001 | A 204 540 09 17 |
| 110 | FILL-LEVEL SENSOR FUEL FILTER RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
001 | A 204 540 10 17 |
| 120 | PRESSURE SENSOR FUEL FILTER RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
001 | A 000 905 11 00 |
| 125 | RING FILTER BOWL RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
002 | A 211 471 01 10 |
| 130 | O-RING FUEL FILTER TO TANK 135.5X6 |
002 | A 025 997 18 45 |
| 135 | CLOSING COVER RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
001 | A 204 470 04 38 |
| 140 | BAYONET TYPE CAP PUMP TO RESERVOIR |
002 | A 001 471 14 30 |
| 140 | COVER RING PUMP TO RESERVOIR RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
002 | A 171 471 01 10 |
| 150 | MULTIPLE NUT MOUNTING FOR FILTER BODY M6 RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
012 | A 001 990 65 50 |
| 160 | FILLER CAP TANK FILLER NECK NOT SUITABLE FOR VEHICLES WITH XENON HEADLAMPS Replaced by: A 221 470 09 05 |
001 | A 211 470 08 05 |
| 160 | FILLER CAP TANK FILLER NECK NOT SUITABLE FOR VEHICLES WITH XENON HEADLAMPS |
001 | A 221 470 09 05 |
| 170 | SEAL RING FILLER CAP TO FILLER NECK Replaced by: A 000 476 00 00 |
001 | A 168 471 04 79 |
| 170 | PROFILE SEAL FILLER CAP TO FILLER NECK |
001 | A 000 476 00 00 |
| 180 | EXPANSION RIVET TANK LOCK FASTENING 5.2 MM |
001 | A 001 990 23 92 |
| 200 | FEED-THROUGH GROMMET SEAL FILLER NECK |
001 | A 000 998 22 01 |
| 250 | TENSIONING STRAP TANK TO BODYSHELL |
002 | A 204 470 01 40 |
| 250 | TENSIONING STRAP TANK TO BODYSHELL |
002 | A 204 470 02 40 |
| 260 | EXPANSION RIVET STRAP |
004 | A 000 991 76 40 |
| 270 | COMBINATION NUT TANK TO BODYSHELL M8 NOTE SERVICE INFORMATION IN WIS WIS-NET#SI82.00-P-0011A# |
004 | A 004 990 33 50 |
| 280 | WASHER TANK TO BODYSHELL |
004 | A 108 990 03 40 |
| 290 | SEAL WASHER BETWEEN TENSIONING STRAP AND BODY |
002 | A 000 997 24 42 |
| 300 | BOLT FILLER NECK TO BODY, BOTTOM M8X35 |
001 | A 000 990 96 03 |
| 300 | BOLT FILLER NECK TO BODY, BOTTOM M8X42,5 |
001 | A 000 990 94 03 |
| 310 | WASHER FILLER NECK TO BODY, BOTTOM |
001 | A 003 990 14 82 |
| 310 | WASHER FILLER NECK TO BODY, BOTTOM |
001 | A 003 990 15 82 |
| 320 | BUSHING FILLER NECK TO BODY, BOTTOM |
001 | A 000 992 23 03 |
| 330 | EXTERNAL HEXAL. HD. BOLT FILLER NECK TO BODY, TOP |
001 | A 001 990 54 03 |
| 330 | BOLT FILLER NECK TO BODY, TOP M8X35 |
001 | A 000 990 96 03 |
| 340 | GASKET BETWEEN TANK LOCKING BASE AND VEHICLE SHELL |
001 | A 204 476 00 80 |
| 360 | MOUNTING PLATE BETWEEN FUEL TANK AND CHASSIS |
001 | A 204 475 01 85 |
| 370 | COMBINATION NUT TANK TO BODYSHELL M8 NOTE SERVICE INFORMATION IN WIS WIS-NET#SI82.00-P-0011A# |
002 | A 004 990 33 50 |
| 370 | HEXAGON NUT TANK TO BODYSHELL M8 |
002 | N 910113 008000 |
| 380 | WASHER TANK TO BODYSHELL |
002 | A 108 990 03 40 |
| 380 | WASHER TANK TO BODYSHELL |
002 | A 460 990 19 40 |
| 510 | MOUNTING BOW TANK FILLER NECK AT FUEL TANK RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
001 | A 204 470 00 91 |
| 600 | WIRING HARNESS TANK PRESSURE SENSOR ADAPTER LINE |
001 | A 204 540 35 07 |
| 900 | CLUTCH FUEL PRESSURE SENSOR 3-PIN MLK1.2;B4/7 |
001 | A 211 545 17 28 |
| 904 | PIN BUSHING HOUSING TANK PRESSURE SENSOR 3-PIN MINI MIC;B4/3 |
001 | A 013 545 19 26 |
| 906 | COUPLING HOUSING FUEL LEVEL SENSOR 3-PIN MLK1.2;X36/3 |
001 | A 211 545 27 28 |
| 908 | CLUTCH PLUG CONNECTION FOR FUEL PUMP WIRING HARNESS 7-PIN SLK2.8, MLK1.2;X36/3 |
001 | A 171 545 01 28 |
| 910 | PLUG CONNECTOR, TANK (PRESSURE SENSOR) 3-PIN MQS;X25/4 |
001 | A 168 540 11 81 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy