| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | CALIPER LEFT PARTS KIT IN CAST DESIGN |
001 | A 204 423 03 81 |
| 010 | CALIPER RIGHT PARTS KIT IN CAST DESIGN |
001 | A 204 423 04 81 |
| 010 | PISTON HOUSING LEFT PARTS KIT IN ALUMINUM DESIGN |
001 | A 204 423 17 81 |
| 010 | PISTON HOUSING RIGHT PARTS KIT IN ALUMINUM DESIGN |
001 | A 204 423 18 81 |
| 010 | CALIPER LEFT PARTS KIT IN CAST DESIGN |
001 | A 204 423 03 81 |
| 010 | CALIPER RIGHT PARTS KIT IN CAST DESIGN |
001 | A 204 423 04 81 |
| 010 | PISTON HOUSING LEFT PARTS KIT IN ALUMINUM DESIGN |
001 | A 204 423 17 81 |
| 010 | PISTON HOUSING RIGHT PARTS KIT IN ALUMINUM DESIGN |
001 | A 204 423 18 81 |
| 020 | BLEEDER VALVE | 002 | A 000 420 94 55 |
| 020 | BLEEDER VALVE | 002 | A 000 420 94 55 |
| 030 | DUST CAP BLEEDER VALVE |
002 | A 000 421 08 87 |
| 030 | DUST CAP BLEEDER VALVE |
002 | A 000 421 08 87 |
| 060 | BRAKE ANCHOR FOR BRAKE CALIPER MADE OF CAST IRON FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. AND/OR TABLE FOOTER |
002 | A 204 423 05 94 |
| 060 | BRAKE CARRIER FOR BRAKE CALIPER MADE OF ALUMINUM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. AND/OR TABLE FOOTER |
002 | A 204 423 01 06 |
| 060 | BRAKE ANCHOR FOR BRAKE CALIPER MADE OF CAST IRON FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. AND/OR TABLE FOOTER |
002 | A 204 423 05 94 |
| 060 | BRAKE CARRIER FOR BRAKE CALIPER MADE OF ALUMINUM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. AND/OR TABLE FOOTER |
002 | A 204 423 01 06 |
| 070 | SPRING | 002 | A 000 993 47 07 |
| 070 | SPRING | 002 | A 000 993 47 07 |
| 080 | HEXAGON HEAD BOLT CALIPER TO WHEEL BEARING M12X1.5X35 |
004 | A 124 421 05 71 |
| 100 | TS SLEEVE SET PARTS KIT |
002 | A 000 420 00 76 |
| 100 | TS SLEEVE SET PARTS KIT |
002 | A 000 420 00 76 |
| 110 | PIN | 004 | A 000 421 08 18 |
| 110 | PIN | 004 | A 000 421 08 18 |
| 130 | BRAKE LINING PARTS KIT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== IMPORTANT! FOR CONVERSION TO 18 INCH WHEELS, THE TIRE ROD RETROFIT KIT MUST ALSO BE ORDERED! WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE Replaced by: A 007 420 60 20 |
001 | A 005 420 42 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE |
001 | A 007 420 60 20 |
| 130 | BRAKE LINING PARTS KIT IMPORTANT! FOR CONVERSION TO 18 INCH WHEELS, THE TIRE ROD RETROFIT KIT MUST ALSO BE ORDERED! WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE Replaced by: A 005 420 81 20 |
001 | A 005 420 49 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT IMPORTANT! FOR CONVERSION TO 18 INCH WHEELS, THE TIRE ROD RETROFIT KIT MUST ALSO BE ORDERED! WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE Replaced by: A 006 420 13 20 |
001 | A 005 420 81 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT IMPORTANT! FOR CONVERSION TO 18 INCH WHEELS, THE TIRE ROD RETROFIT KIT MUST ALSO BE ORDERED! WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE Replaced by: A 006 420 61 20 |
001 | A 006 420 13 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== IMPORTANT! FOR CONVERSION TO 18 INCH WHEELS, THE TIRE ROD RETROFIT KIT MUST ALSO BE ORDERED! WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE Replaced by: A 007 420 85 20 |
001 | A 006 420 61 20 |
| 130 | TS DISK BRAKE PAD PARTS KIT WHEN SELLING BRAKE LININGS TO END USERS/DESK BUYERS THE A 203 005 25 99 IS TO BE HANDED OVER FREE OF CHARGE |
001 | A 007 420 85 20 |
| 150 | BRAKE WEAR SENSOR BRAKE LINING WEAR INDICATOR |
001 | A 211 540 17 17 |
| 200 | BRAKE DISK, VENTED REAR LEFT ONLY REPLACEABLE BY PAIRS |
001 | A 000 423 12 12 |
| 200 | BRAKE DISK, VENTED REAR RIGHT ONLY REPLACEABLE BY PAIRS |
001 | A 000 423 12 12 |
| 210 | FITTED BOLT BRAKE DISC TO WHEEL HUB M8X12 |
002 | A 220 421 01 71 |
| 250 | PROTECTIVE PLATE LEFT |
001 | A 204 421 17 20 |
| 250 | PROTECTIVE PLATE RIGHT |
001 | A 204 421 18 20 |
| 260 | BOLT EXPANSION LOCK AND COVER PANEL TOWHEELCARRIER M8X12 |
004 | A 220 423 03 71 |
| 260 | SCREW COVER PLATE TO WHEEL BEARING M6X12 |
004 | N 000000 005943 |
| 300 | TS BRAKE SHOE PARTS KIT |
001 | A 004 420 86 20 |
| 310 | EXTENSION SPRING BRAKE PAD TO COVER PLATE Replaced by: A 230 423 00 92 |
004 | A 201 423 05 92 |
| 310 | SPRING BRAKE PAD TO COVER PLATE |
004 | A 230 423 00 92 |
| 330 | EXTENSION SPRING BRAKE SHOE PULL-BACK |
002 | A 210 423 00 92 |
| 340 | EXTENSION SPRING BRAKE SHOE PULL-BACK NOT SUITABLE FOR VEHICLES WITH XENON HEADLAMPS |
002 | A 171 423 00 92 |
| 340 | EXTENSION SPRING BRAKE SHOE PULL-BACK GARAGE DOOR OPENER MUST BE COMMISSIONED VIA XENTRY DIAGNOSTICS |
002 | A 000 993 73 11 |
| 350 | EXPANSION LOCK F BRAKE EXPANDING LOCK |
002 | A 201 420 05 89 |
| 360 | CYLINDER PIN BRAKE CONTROL CABLE TO TENS. SHACKLE |
002 | A 108 427 00 74 |
| 370 | BRAKE ADJUSTER BRAKE SHOE ADJUSTMENT |
002 | A 201 420 03 73 |
| 380 | SUPPORTING BUSH BRAKE SHOE ADJUSTMENT |
002 | A 124 423 00 50 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy