ELECTRICAL EQUIPMENT AND INSTRUMENTS

EPC / Mercedes / Car / FG / FG 189.011 / 54 / 043
‹ ›

№- Name A* Part number
001 COMBI INSTRUMENT
WITH KM-GRADUATION RATIO 0.935, REAR AXLE RATIO 1:4.67 		001 A 189 542 06 01
COMBI INSTRUMENT
WITH M.P.H.-GRADUATION RATIO 1.50, REAR AXLE RATIO 1:4.67
UP TO CHASSIS 8501050 ARE NEEDED THE BASES 2 PIECES 189 657 00 31 2 PIECES 189 657 01 31 2 PIECES 189 651 00 31 THEY HAVE TO BE WELDED ON TO REINFORCEMENT FRAME, CENTER AND REAR, AND ROOF FRAME, CENTER 		001 A 189 542 07 01
COMBI-INSTRUMENT WITH
KM-GRADUATION RATIO 1.0, REAR AXLE RATIO 1:5.125 SPECIAL REQUEST 		001 A 189 542 11 01
COMBI INSTRUMENT
WITH M.P.H.-GRADUATION RATIO 1.61, REAR AXLE RATIO 1/5.125 SPECIAL REQUEST 		001 A 189 542 10 01
COMBI INSTRUMENT
WITH KM-GRADUATION RATIO 0.91, REAR AXLE RATIO 1:4.67 		001 A 189 542 08 01
002 OIL PRESSURE GAUGE
FOR ALL COMBI INSTRUMENTS 		001 A 000 542 46 02
003
TEMPERATURE GAUGE FOR ALL COMBI INSTRUMENTS 		001 A 001 542 19 05
004 FUEL GAUGE
FOR ALL COMBI INSTRUMENTS 		001 A 000 542 64 03
005 AMPEREMETER 40 AMP.
FOR ALL COMBI INSTRUMENTS 		001 A 000 542 10 24
006 SPEEDOMETER WITH
KILOMETER GRADUATION FOR COMBI INSTRUMENT 189 542 00 01/06 01 		001 A 002 542 15 06
SPEEDOMETER WITH
M.P.H. GRADUATION FOR COMBI INSTRUMENT 189 542 01 01/07 01 		001 A 002 542 16 06
SPEEDOMETER WITH
M.P.H. GRADUATION FOR COMBI INSTRUMENT 189 542 04 01/10 010 		001 A 002 542 19 06
SPEEDOMETER WITH
KILOMETER GRADUATION FOR COMBI INSTRUMENT 189 542 05 01/11 01 		001 A 002 542 20 06
007 CONTROL SWITCH 001 A 000 542 01 25
009 LAMP SOCKET 005 A 000 545 07 19
BULB
H 12 V 2 W DIN 72601 		005
SPRING WASHER
B 5 DIN 137 FOR COMBI INSTRUMENT AT INSTRUMENT PANEL 		002
CLOCK, ELECTRIC, 12 VOLT
UP TO CHASSIS 001692 		001 A 186 542 06 11
012 CLOCK, ELECTRIC, 12 VOLT
FROM CHASSIS 001693 		001 A 186 542 08 11
013 LAMP SOCKET 001 A 000 545 07 19
BULB
H 12 V 2 W DIN 72601 		001
SPRING WASHER
B 5 DIN 137 FOR CLOCK AT INSTRUMENT PANEL 		002
WASHER
FOR ROTARY SWITCH AND SWITCH FOR SPRING TENSION DEVICE 		NB A 000 987 17 41
SWITCH
FOR SPRING-DRIVE, TORSION BAR UP TO CHASSIS 001692 		001 A 000 545 01 67
014 SWITCH
FOR SPRING-DRIVE, TORSION BAR FROM CHASSIS 001693 		001 A 000 545 07 67
ROTARY SWITCH
FOR HEADLIGHT, FOGLIGHTS AND CLEARANCE LIGHTS UP TO CHASSIS 001692 		001 A 120 540 00 58
015 PULL SWITCH
FOR HEADLIGHT, FOGLIGHTS AND CLEARANCE LIGHTS FROM CHASSIS 001693 		001 A 128 540 00 58
LENS-HD. SCREW
AM 4X6 DIN 85-4 S 		010
TOOTHED WASHER
4,3 DIN 6797 		010
016 PUSH-PULL SWITCH
FOR 3RD HORN WHICH CAN BE SWITCHED OFF 		001 A 000 545 06 11
WASHER
8,4 DIN 433 		001
ESCUTCHEON
TO 186 540 00 44 		001 A 186 545 03 72
018 ESCUTCHEON
TO 186 540 01 44 		001 A 136 545 06 72
019 FELT RING 001 A 000 997 20 40
BUTTON
UP TO CHASSIS 001692 		001 A 186 545 00 37
020 BUTTON
FROM CHASSIS 001693 		001 A 110 540 06 83
021 PUSH-PULL SWITCH
WITH CONTROL LIGHT SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING 		001 A 000 545 18 11
022 ESCUTCHEON
SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING 		001 A 198 545 05 72
BUTTON
WITH GREEN CONTROL GLASS SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING UP TO CHASSIS 001692 		001 A 198 545 04 37
22a BUTTON
WITH GREEN CONTROL GLASS SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING FROM CHASSIS 001693 		001 A 110 540 07 83
22b WASHER
SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING 		001 A 188 990 06 40
WASHER
SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING 		NB A 000 984 08 55
BULB
J 12 V 2 W DIN 72601 SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING 		001

Replaced by: A 000 545 06 11 		001 A 186 540 00 44
PUS-PULL SWITCH
FOR DOME LIGHT
Replaced by: A 000 545 06 11 		001 A 189 540 00 44
023 PUS-PULL SWITCH
FOR DOME LIGHT 		001 A 000 545 06 11
024 ESCUTCHEON 001 A 186 545 03 72
025 FELT RING 001 A 000 997 20 40
BUTTON
UP TO CHASSIS 001692 		001 A 186 545 00 37
026 BUTTON
FROM CHASSIS 001693 		001 A 110 540 06 83
027 DISTANCE LIGHT 001 A 000 545 25 15
BULB
J 12 V 2 W DIN 72601 		001
029 GROMMET
FOR CAPILLARY TUBE, TELE-THERMOMETER THROUGH FRONT WALL 		001 A 186 997 06 81
030 SOCKET
FOR HAND LAMP AT BODY FORNT END, INSIDE 		001 A 000 545 05 25
031 CABLE BRACKET
FOR CAPILLARY TUBE AT HOOD CABLE 		001 A 000 546 03 43
035 DISTANCE LIGHT
BLINKER SWITCH WITH HORN SIGNAL BLACK UP TO CHASSIS 001692 		001 A 000 545 79 24
036 BLINKER TRANSMITTER,
12 VOLT MAX. LOAD 90 WATT 		001 A 000 544 23 32
LENS-HD. SHEET
METAL SCREW BZ 4,2X9,5 DIN 7981 FOR DISTANCE LIGHT BLINKER TRANSMITTER AT FRONT WALL 		002
037 SWITCH
UP TO CHASSIS 001692 SPECIAL REQUEST FOR CARS WITH ZF-HYDROSTEERING IS NOT APPLICABLE TO CARS TO THE USA FROM CHASSIS 00 		001 A 001 545 03 24
038 BUTTON, BLACK
UP TO CHASSIS 001692 SPECIAL REQUEST FOR CARS WITH ZF-HYDRO STEERING IS NOT APPLICABLE TO CARS TO THE USA FROM CHASSIS 0 		001 A 180 545 04 37
BUTTON, IVORY COLOURED
SPECIAL REQUEST UP TO CHASSIS 001692 SPECIAL REQUEST FOR CARS WITH ZF-HYDRO STEERING IS NOT APPLICABLE TO CARS TO THE US 		001 A 180 545 05 37
REVERSING SWITCH
FROM CHASSIS 7500011 TO 8501106
SPECIAL REQUEST, TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUT OUT AND FOR VEHICLES WITH ZF-HYDRO-STEERING 		001 A 000 545 91 24
REVERSING SWITCH
FROM CHASSIS 8501107 TO 001692
SPECIAL REQUEST, TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUT OUT AND FOR VEHICLES WITH ZF-HYDRO-STEERING 		001 A 000 545 90 24
BLINKER LEVER KNOB, BLACK
FROM CHASSIS 7500011 TO 001692
SPECIAL REQUEST, TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUT OUT AND FOR VEHICLES WITH ZF-HYDRO-STEERING 		001 A 180 545 04 37
BLINKER LEVER
KNOB, IVORY COLOURED SPECIAL REQUEST FROM CHASSIS 7500011 TO 001692
SPECIAL REQUEST, TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUT OUT AND FOR VEHICLES WITH ZF-HYDRO-STEERING 		001 A 180 545 05 37
REVERSING SWITCH
FROM CHASSIS 001693
SPECIAL REQUEST, OMISSION OF LIGHT SIGNAL FOR USA 		001 A 000 545 90 24
BLINKER LEVER KNOB, BLACK
FROM CHASSIS 001693
SPECIAL REQUEST, OMISSION OF LIGHT SIGNAL FOR USA 		001 A 180 545 04 37
BLINKER LEVER
KNOB, IVORY COLOURED SPECIAL REQUEST FROM CHASSIS 001693
SPECIAL REQUEST, OMISSION OF LIGHT SIGNAL FOR USA 		001 A 180 545 05 37
CABLE HARNESS
FOR DIRECTION INDICATOR BLINKER LIGHT UP TO CHASSIS 8501106
STATE COLOUR WHEN ORDERING 		001 A 189 540 08 09
CABLE HARNESS
FOR DIRECTION INDICATOR BLINKER LIGHT AND HORN FROM CHASSIS 8501107 TO 001692
STATE COLOUR WHEN ORDERING 		001 A 189 540 10 09
ELECTRIC CABLE
FOR LIGHTENING OF GEAR SELECTOR INDICATOR FROM CHASSIS 8501107 TO 001692
STATE COLOUR WHEN ORDERING 		001 A 189 546 00 02
ELECTRIC CABLE
FOR LIGHTENING OF GEAR SELECTOR INDICATOR UP TO CHASSIS 001692
STATE COLOUR WHEN ORDERING 		001 A 189 546 00 02
ADDITIONAL CABLE HARNESS
FOR DIRECTION INDICATOR BLINKER LIGHT, HORN AND BLINKER LIGHT SYSTEM IS NOT APPLICABLE TO CARS TO THE USA
STATE COLOUR WHEN ORDERING 		001 A 189 540 11 09
ADDITIONAL CABLE HARNESS
FOR DIRECTION INDICATOR BLINKER LIGHT FROM CHASSIS 7500011 TO 001692
UP TO CHASSIS 8500868 TOGETHER WITH 1 GUIDE CLAMP, RIGHT 189 730 04 77 2 HEX. -HD. SCREW M 6X20 DIN 933-8 G 4 HEX. -HD. SCREW M 6X22 DIN 933-8 G 6 LOCK WASHER B 6 DIN 127 6 HEX. NUT M 6 DIN 934-5 S 1 ADDITIONAL WINDOW RUN 189 730 04 15 1 CYLINDR. SCREW M 6X55 DIN 84-4 S 4 HEX. NUT M 6 DIN 934-5 S 3 LOCK WASHER B 6 DIN 127 1 WASHER 6,4 DIN 125 3 WASHER A 6,4 DIN 9021 1 GUIDE JAW 189 735 00 32 1 COUNTERSUNK SCREW AM 4X10 DIN 63-4 S 1 FIXING ANGLE 189 735 00 12 4 HEX. -HD. SCREW M 4X10 DIN 933-8 G 4 WASHER 4,3 DIN 125 4 LOCK WASHER B 4 DIN 127 4 HEX. NUT M 4 DIN 934-5 S ALSO BORE NEW FIXING HOLES AT CRANK-OPERATED WINDOW AS WELL AS AT OUTER PANEL AND INNER PANEL 		001 A 189 540 03 09
ADDITIONAL CABLE HARNESS
FROM SLIP RING TO SWITCH UP TO CHASSIS 001692 IS NOT APPLICABLE TO CARS TO THE USA
STATE COLOUR WHEN ORDERING 		001 A 189 540 12 09
HOSE CLAMP
WSN 9 N 262 FOR BLINKER TRANSMITTER CABLE AT JACKET TUBE UP TO CHASSIS 001692 		001
HOSE STRAP
9X0,4X330 N 263 ORDER BY THE METER FOR BLINKER TRANSMITTER CABLE AT JACKET TUBE UP TO CHASSIS 001692 		001
044 OIL PRESSURE GAUGE PIPE 001 A 189 540 00 60
045 OIL PRESSURE GAUGE PIPE 001 A 189 540 01 60
046 INTERMEDIATE PIECE
FOR OIL PRESSURE GAUGE PIPE 		001 A 198 542 00 45
047 OIL PRESSURE
SWITCH IN INTERMEDIATE PIECE 		001 A 000 542 54 17
048 HOSE
FOR OIL PRESSURE GAUGE PIPE 		001 A 136 540 02 59
049 RUBBER HOSE, 25 MM LONG
FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL, CROSS DUCT, BOTTOM ORDER BY THE METER 		002 A 000 987 00 32
050 FIXING CLAMP
FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL, CROSS DUCT, BOTTOM 		002 A 136 995 05 01
CYLINDR. SHEET
METAL SCREW BZ 3,9X9,5 DIN 7971 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL, CROSS DUCT, BOTTOM 		002
052 GROMMET
FOR OIL PRESSURE GAUGE PIPE THROUGH FRONT WALL 		001 A 186 997 06 81
LOCK WASHER
B 10 DIN 127 FOR FIXING INTERMEDIATE PIECE AT BRACKET, FRONT WALL 		001
HEX. NUT
M 10 DIN 70616-5 S FOR FIXING INTERMEDIATE PIECE AT BRACKET, FRONT WALL 		001
054 FLEXIBLE SHAFT,
1,350-MM LONG FOR SPEEDOMETER 		001 A 186 542 03 07
057 FIXING CLAMP
FOR FLEXIBLE SHAFT 		001 A 181 995 00 20
CYLINDR. SCREW
AM 4X10 DIN 84-4 S FOR FIXING CLAMP AT BRACKET 		001
LOCK WASHER
B 4 DIN 127 FOR FIXING CLAMP AT BRACKET 		001
HEX. NUT
M 4 DIN 934-5 S FOR FIXING CLAMP AT BRACKET 		001
FIXING CLAMP
AT CLUTCH HOUSING 		001 A 181 995 00 20
064 GROMMET
FOR SPEEDOMETER SHAFT THROUGH FRONT WALL 		001 A 183 997 00 81
066 FOOT DIMMER SWITCH 001 A 000 545 04 12
UNDERLAYER
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		001 A 189 545 01 89
LENS-HD. COUNTERSUNK
SCREW AM 5X30 DIN 91-5 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002
LENS-HD. COUNTERSUNK
SCREW AM 5X35 DIN 91-5 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002
068 INSULATING PLATE
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		001 A 136 545 01 58
069 GROMMET
FOR FOOT DIMMER SWITCH THROUGH FRONT WALL 		001 A 186 997 06 81
072 STOP LIGHT SWITCH
FOR HYDR. MASTER CYLINDER SEE GROUP 42 		001 A 000 545 22 09
075 3-ELEMENT VOLTAGE
REGULATOR, WITH INTERFERENCE SUPPRESSION SEE GROUP 15 		001 A 001 154 04 06
076 INTERFERENCE SUPPRESSOR 001 A 000 156 39 01
GROMMET 002 A 000 997 00 81
077 REGULATOR PLATE 001 A 189 540 00 42
HEX.-HD. SCREW
M 5X35 DIN 931-8 G FOR REGULATOR PLATE AND REGULATOR AT BODY FRONT END 		003
LOCK WASHER
B 5 DIN 127 FOR REGULATOR PLATE AND REGULATOR AT BODY FRONT END 		003
LENS-HD. COUNTERSUNK
SCREW AM 5X15 DIN 88-4 S FOR REGULATOR PLATE AND REGULATOR AT BODY FRONT END 		001
TOOTHED WASHER
A 5,3 DIN 6797 FOR REGULATOR PLATE AND REGULATOR AT BODY FRONT END 		001
CYLINDR. SCREW
AM 5X12 DIN 84-4 S FOR INTERFERENCE SUPPRESSOR AT REGULATOR PLATE 		002
LOCK WASHER
B 5 DIN 127 FOR INTERFERENCE SUPPRESSOR AT REGULATOR PLATE 		002
082 INTERFERENCE SUPPRESSION
CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 15 UP TO CHASSIS 8500577 		001 A 000 156 29 01
INTERFERENCE SUPPRESSION
CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 15 UP TO CHASSIS 8500577 		001 A 000 156 31 01
INTERFERENCE SUPPRESSION
CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 16 FROM CHASSIS 8500578 		001 A 000 156 51 01
INTERFERENCE SUPPRESSION
CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 16 FROM CHASSIS 8500578 		001 A 000 156 52 01
095
PROTECTIVE CIRCUIT BREAKER 12 V 22 A FOR SPRING DRIVE, TORSION BAR 		001 A 000 545 11 34
096 UNDERLAYER
FOR OVERLOAD PROTECTIVE CIRCUIT BREAKER AT FRONT WALL 		001 A 186 545 00 89
CYLINDR. SCREW
AM 4X12 DIN 84-4 S FOR OVERLOAD PROTECTIVE CIRCUIT BREAKER AT FRONT WALL 		002
WASHER
4,3 DIN 125 FOR OVERLOAD PROTECTIVE CIRCUIT BREAKER AT FRONT WALL 		002
LOCK WASHER
B 4 DIN 127 FOR OVERLOAD PROTECTIVE CIRCUIT BREAKER AT FRONT WALL 		002
100 SOLENOID SWITCH 002 A 000 545 04 67
HEX.-HD. SCREW
M 6X15 DIN 933-8 G FOR CONTACTOR AT BRACKET, FRAME 		002
LOCK WASHER
B 6 DIN 127 FOR CONTACTOR AT BRACKET, FRAME 		002
HEX. NUT
M 6 DIN 934-5 S FOR CONTACTOR AT BRACKET, FRAME 		002
CYLINDR. SCREW
AM 4X18 DIN 84-4 S FOR CONTACTOR AT BRACKET, FRAME 		008
LOCK WASHER
B 4 DIN 127 FOR CONTACTOR AT BRACKET, FRAME 		008
104 CONNECTING CABLE
FROM 1ST TO 2ND SOLENOID SWITCH 		001 A 186 540 00 38
105 RUBBER PROTECTIVE CAP 002 A 000 546 02 35
106 IGNITION COIL 001 A 000 158 06 03
107 FIXING CLAMP
FOR IGNITION COIL 		001 A 000 158 02 40
CYLINDR. SCREW
AM 5X40 DIN 84-4 S FOR FIXING CLAMP 		001
SQUARE NUT
M 5 DIN 562 FOR FIXING CLAMP 		001
110 PRE-RESISTOR
FOR IGNITION COIL 		001 A 000 158 01 45
111 BRACKET
FOR IGNITION COIL, PRE-RESISTOR FROM CHASSIS 8500578 		001 A 189 158 00 40
CYLINDR, SCREW
AM 5X12 DIN 84-4 S FOR PRE-RESISTOR AT BRACKET FROM CHASSIS 8500578 		002
LOCK WASHER
B 5 DIN 127 FOR PRE-RESISTOR AT BRACKET FROM CHASSIS 8500578 		002
HEX. NUT
M 5 DIN 934-5 S FOR PRE-RESISTOR AT BRACKET FROM CHASSIS 8500578 		002
HEX.-HD. SCREW
M 6X15 DIN 933-8 G FOR IGNITION COIL AT AIR DUCT, LEFT UP TO CHASSIS 8500577 		002
WASHER
A 6,4 DIN 9021 FOR IGNITION COIL AT AIR DUCT, LEFT UP TO CHASSIS 8500577 		002
LOCK WASHER
B 6 DIN 127 FOR IGNITION COIL AT AIR DUCT, LEFT UP TO CHASSIS 8500577 		002
HEX.-HD. SCREW
M 8X22 DIN 933-8 G FOR IGNITION COIL AT CYLINDER HEAD COVER FROM CHASSIS 8500578 		002
WASHER
8,4 DIN 125 FOR IGNITION COIL AT CYLINDER HEAD COVER FROM CHASSIS 8500578 		002
LOCK WASHER
B 8 DIN 127 FOR IGNITION COIL AT CYLINDER HEAD COVER FROM CHASSIS 8500578 		002
114 RUBBER PROTECTIVE CAP
FOR IGNITION COIL, TERMINALS 1 AND 15 		002 A 000 546 02 35
BUTTON-HD. SCREW
AM4X10 DIN 86-4 S FOR PRE-RESISTOR AT AIR DUCT, LEFT UP TO CHASSIS 8500577 		002
LOCK WASHER
B 4 DIN 127 FOR PRE-RESISTOR AT AIR DUCT, LEFT UP TO CHASSIS 8500577 		002
118 GROUND CABLE
FROM INTERFERENCE SUPPRESSION CONDENSER, IGNITION COIL, TO ENGINE UP TO CHASSIS 8500577 		001 A 180 540 01 41
119 CABLE CONNECTOR, 2 POLES
FOR SOLENOID VALVE 		001 A 000 546 18 41
CYLINDRICAL TAPPING SCREW
BM 4X15 DIN 7513 FOR CABLE CONNECTOR AT FRAME 		002
HOSE CLAMP
S 16/9 ZY N 288A FOR ELECTRIC CABLE TO SOLENOID VALVE 		003
125 LOUD BLAST HORN 001 A 000 542 33 20
126 LOUD BLAST HORN 001 A 000 542 34 20
LOUD BLAST HORN
SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE 		001 A 001 542 09 20
LOUD BLAST HORN
SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE 		001 A 001 542 10 20
127 DISC-TYPE HORN 001 A 001 542 23 20
128 CONTACTOR 12 VOLT
FOR AUTOMATIC AUXILIARY STARTER DEVICE AND 3-TUNE SIGNAL SYSTEM 		001 A 000 542 30 19
129 CONTACTOR 12 VOLT
FOR AUTOMATIC AUXILIARY STARTER DEVICE AND 3-TUNE SIGNAL SYSTEM 		001 A 000 542 29 19
130 CONTACTOR WITH
CONTACT 12 VOLT FOR 3-TUNE SIGNAL SYSTEM 		001 A 000 542 27 19
131 CONTACTOR 12 VOLT
FOR AUTOMATIC FUEL PUMP 		001 A 000 542 27 19
132 BRACKET
FOR RELAY FUEL PUMP, HORN 		001 A 189 540 01 73
CLIP NUT
FOR RELAY FUEL PUMP, HORN 		002 A 000 994 04 45
LENS-HD. SHEET
METAL SCREW B 4,2X9,5 DIN 7981 FOR RELAY FUEL PUMP, HORN 		002
135 BRACKET
AT HEATING DUCT FOR RELAY AUTOMATIC AUXILIARY STARTER DEVICE 		001 A 189 540 00 73
CYLINDR. SCREW
AM 5X10 DIN 84-4 S FOR RELAY AUTOMATIC AUXILIARY STARTER DEVICE 		001
LOCK WASHER
B 5 DIN 127 FOR RELAY AUTOMATIC AUXILIARY STARTER DEVICE 		001
CYLINDR. SCREW
AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT HORN 		006
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTION AT HORN 		006
HEX.-HD. SCREW
M 10X25 DIN 933-8 G FOR HORN AT SUPPORT 		003
LOCK WASHER
B 10 DIN 127 FOR HORN AT SUPPORT 		003
HEX. NUT
M 10 DIN 934-5 S FOR HORN AT SUPPORT 		003
136 CONNECTION CABLE
FROM 1ST TO 2ND HORN 		001 A 183 540 00 38
CONTACTOR 12 V
SPECIAL REQUEST BLINKER SIGNAL SYSTERM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL 		001 A 000 542 27 19
ELECTRIC CABLE
B 1 DIN 72551 FROM RELAY, TERMINAL 30 TO RELAY, TERMINAL 86 SPECIAL REQUEST BLINKER SIGNAL SYSTERM FOR CARS EXPORTED TO 		001
CABLE TERMINAL
4X0,8 N 261 SPECIAL REQUEST BLINKER SIGNAL SYSTERM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL 		005
GROMMET
SPECIAL REQUEST BLINKER SIGNAL SYSTERM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL 		005 A 000 997 01 81
RELAY WITH
ALTERNATING CONTACT SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY 		001 A 000 542 29 19
ADDITIONAL CABLE SET
SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY 		001 A 189 540 18 09
CABLE CONNECTOR
SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY 		001 A 000 546 45 41
BRACKET
FOR RELAY SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY 		001 A 111 545 04 40
LENS-HD. SCREW
AM 4X22 DIN 7985-4 S FOR RELAY TO BRACKET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY 		002
LOCK WASHER
B 4 DIN 127 FOR RELAY TO BRACKET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY 		002
HEX. NUT
M 4 DIN 934-5 S FOR RELAY TO BRACKET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY 		002
140 DOUBLE-TONE HORN
WITH PROTECTIVE GRILL 		001 A 000 542 11 99
141 CONTACTOR 12 V 001 A 000 542 27 19
142 PUSH-BUTTON SWITCH 001 A 000 545 10 11
143 BRACKET
FOR PUSH-BUTTON SWITCH 		001 A 188 542 02 39
LENS-HD. SHEET
METAL SCREW B 3,9X9,5 DIN 7971 FOR BRACKET TO CROSS REINFORCEMENT 		003
144 BRACKET
FOR RELAY, HORN SYSTEM 		001 A 189 540 04 73
145 ADDITIONAL CABLE HARNESS 001 A 189 540 00 09
146 ADDITIONAL CABLE HARNESS 001 A 189 540 01 09
147 ADDITIONAL CABLE HARNESS 001 A 189 540 02 09
150 SUPPORT, LEFT 001 A 189 540 02 73
151 SUPPORT, RIGHT 001 A 189 540 03 73
CABLE, 1,300 MM LONG
A 1,5 DIN 72551 SW ORDER BY THE METER 		002
CABLE, 1,300 MM LONG
A 1,5 DIN 72551 GN ORDER BY THE METER 		001
INSULATING HOSE,
1,300-MM LONG B 8X9 SW DIN 40621 ORDER BY THE METER 		001
CABLE TERMINAL
4X0,8 N 261 		002
GROMMET 002 A 000 997 00 81
CABLE CONNECTOR, 1-POLE 001 A 000 546 45 41
HEX.-HD. SCREW
M 10X35 DIN 933-10 K FOR SUPPORT TO BUMPER 		002
HEX.-HD. SCREW
M 8X18 DIN 933-10 K FOR SUPPORT TO BUMPER 		002
LOCK WASHER
B 8 DIN 127 FOR SUPPORT TO BUMPER 		002
HEX. NUT
M 8 DIN 934-5 S FOR SUPPORT TO BUMPER 		002
HEX.-HD. SCREW
M 10X100 DIN 931-8 G VERCHROMT FOR HORN TO SUPPORT 		002
LOCK WASHER
B 10 DIN 127 VERCHROMT FOR HORN TO SUPPORT 		002
157 INTERMEDIATE FITTING
FOR HORN TO SUPPORT 		002 A 189 542 00 38
158 WASHER
FOR HORN TO SUPPORT 		002 A 189 990 00 40
FIXING CLAMP 003 A 186 995 02 20
CYLINDRICAL SCREW
AM 5X12 DIN 84-4 S 		002
ADDITIONAL CABLE HARNESS
UP TO CHASSIS 001692 SPECIAL REQUEST FOGLIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001 A 180 540 06 09
ADDITIONAL CABLE HARNESS
FROM CHASSIS 001693 SPECIAL REQUEST FOGLIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001 A 128 540 04 09
INSULATING HOSE,
100-MM LONG B 20X22,4 SW DIN40621 OVER MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER SPECIAL REQUEST FOGLIG 		001
FUSE BOX, 2-POLES
SPECIAL REQUEST FOGLIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001 A 000 545 03 01
LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 SPECIAL REQUEST FOGLIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		002
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA