ELECTRICAL EQUIPMENT AND INSTRUMENTS

EPC / Mercedes / Car / FG / FG 189.011 / 54 / 042
‹ ›

№- Name A* Part number
001 BATTERY 001 A 000 541 47 01
BATTERY
UP TO CHASSIS 8501050 ARE NEEDED THE BASES 2 PIECES 189 657 00 31 2 PIECES 189 657 01 31 2 PIECES 189 651 00 31 THEY HAVE TO BE WELDED ON TO REINFORCEMENT FRAME, CENTER AND REAR, AND ROOF FRAME, CENTER 		001 A 000 541 34 01
SPECIAL COLD
START BATTERY 12 V 56 AH SPECIAL REQUEST 		001 A 000 541 59 01
002
BATTERY MOUNTING FOR BATTERY AT FRONT WALL 		001 A 186 540 01 23
005 CYLINDER SHEET
METAL SCREW B 6,3X13 DIN 7971 FOR ANGLE RAIL AT BASE PLATE 		002
006 SHEET METAL NUT
FOR ANGLE RAIL AT BASE PLATE 		002 A 000 994 08 45
007 TIGHTENING SCREW
FOR BATTERY MOUNTING 		002 A 186 541 01 24
WASHER
6,4 DIN 125 FOR BATTERY MOUNTING 		001
LOCK WASHER
B 6 DIN 127 FOR BATTERY MOUNTING 		003
HEX. NUT
M 6 DIN 934-5 S FOR BATTERY MOUNTING 		003
010 STARTER CABLE
POS. POLE 		001 A 188 540 01 30
STARTER CABLE
POS. POLE 		001 A 189 540 00 30
012 RUBBER PROTECTIVE CAP
FOR STARTER CABLE 		001 A 111 546 00 35
013 GROUND CABLE
BATTERY, STARTER, NEG.POLE 		001 A 188 540 01 31
GROUND CABLE
BATTERY, STARTER, NEG.POLE 		001 A 189 540 00 31
GROMMET
FOR BATTERY CABLE THROUGH BRACKET AT FRONT WALL 		001 A 000 997 37 81
016 RUBBER HOSE
18X20 DIA., 20-MM LONG OVER STARTER POS. AND NEG. CABLE 		003 A 180 997 15 82
HEX.-HD. SCREW
M 5X10 DIN 933-8 G FOR GROUND CABLE OF HEADLIGHT AT FRONT CROSS MEMBER 		002
LOCK WASHER
B 5 DIN 127 FOR GROUND CABLE OF HEADLIGHT AT FRONT CROSS MEMBER 		002
019 MOUNTING CLAMP
FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE 		001 A 136 995 01 37
020 MOUNTING CLAMP
FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE 		001 A 186 995 02 37
021 CYLINDRICAL SCREW
AM 6X12 DIN 84-4 S FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE 		001
022 LOCK WASHER
B 6 DIN 127 FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE 		001
023 BRACKET
FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE 		001 A 189 545 02 40
024 MOUNTING CLAMP
FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE 		001 A 136 995 04 20
CYLINDRICAL SCREW
AM 5X10 DIN 84-4 S FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE 		001
LOCK WASHER
B 5 DIN 127 FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE 		001
HEX. NUT
M 5 DIN 934-5 S FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE 		001
MAIN CABLE SET, LEFT HALF
UP TO CHASSIS 8500902 		001 A 189 540 00 05
MAIN CABLE SET, LEFT HALF
FROM CHASSIS 8500903 TO 001692 		001 A 189 540 04 05
030 MAIN CABLE SET, LEFT HALF
FROM CHASSIS 001693 		001 A 189 540 06 05
MAIN CABLE
SET, RIGHT HALF UP TO CHASSIS 8500532 1 CABLE COUPLING 000 545 21 26 FOR ANTI-CREEP DEVICE HAS TO BE DELIVERED UP TO CHA 		001 A 189 540 01 05
031 MAIN CABLE
SET, RIGHT HALF FROM CHASSIS 001693 		001 A 189 540 07 05
CABLE COUPLING, 1-POLE
FOR CABLE 83, MAIN CABLE SET, RIGHT HALF, AT SWITCH FOR ANTICREEP DEVICE UP TO CHASSIS 8500532 		001 A 000 545 21 26
032 CABLE COUPLING, 1-POLE
FOR CABLE 83, MAIN CABLE SET, RIGHT HALF, AT SWITCH FOR ANTICREEP DEVICE FROM CHASSIS 8500533 		001 A 000 545 26 26
MAIN CABLE SET, LEFT HALF
UP TO CHASSIS 8500902 		001 A 189 540 02 05
MAIN CABLE SET, LEFT HALF
FROM CHASSIS 8500903 TO 001692 		001 A 189 540 05 05
MAIN CABLE SET, LEFT HALF
FROM CHASSIS 001693 		001 A 189 540 08 05
MAIN CABLE
SET, RIGHT HALF UP TO CHASSIS 8500532 1 CABLE COUPLING 000 545 21 26 FOR ANTI-CREEP DEVICE HAS TO BE DELIVERED UP TO CHA 		001 A 189 540 03 05
MAIN CABLE
SET, RIGHT HALF FROM CHASSIS 001693 		001 A 189 540 09 05
ADDITIONAL CABLE SET
FROM FUSE BOX AND IGNITION COIL TO PRE-RESISTOR FROM CHASSIS 8500578 TO 8500902 (ONLY VALID FOR MAIN CABLE SET 189 540 0 		001 A 189 540 09 09
034 GROMMET
FOR MAIN CABLE SET THROUGH PARTITION AND FRONT WALL 		002 A 186 997 04 81
035 SLEEVE
FOR MAIN CABLE SET, HEADLIGHT 		002 A 120 987 00 37
036 GROMMET
FOR MAIN CABLE SET THROUGH FRONT WALL AND THROUGH AIR DISTRIBUTOR 		002 A 186 997 07 81
037 GROMMET
FOR MAIN CABLE SET THROUGH PARDITION AND FRONT WALL 		001 A 183 997 01 81
038 GROMMET
FOR CABLE SET TO CLOCK 		001 A 000 997 22 81
039 FIXING CLAMP
UNDER RIGHT AIR DISTRIBUTOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		001 A 186 995 02 42
040 FIXING CLAMP
NEAR RIGHT AIR DISTRIBUTOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		001 A 136 995 01 35
CYLINDRICAL SCREW
AM 6X12 DIN 84-4 S FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		002
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		002
043 MOUNTING CLAMP
ON REGULATOR PLATE FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		001 A 136 995 01 37
044 MOUNTING CLAMP,
NEAR REGULATOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		001 A 181 995 00 20
044 MOUNTING CLAMP,
NEAR REGULATOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		002 A 181 995 00 20
045 MOUNTING CLAMP
FOR WINDSCREEN WIPER, CABLE FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		002 A 181 995 00 20
CYLINDRICAL SCREW
AM 4X12 DIN 84-4 S FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		002
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL 		002
046 MOUNTING CLAMP
FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR 		002 A 136 995 01 35
MOUNTING CLAMP
FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR 		001 A 136 995 01 37
CYLINDRICAL SCREW
AM 6X15 DIN 84-4 S FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR 		003
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR 		003
049 FIXING CLAMP
FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL 		001 A 136 995 04 20
FIXING CLAMP
FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL 		001 A 186 995 00 37
CYLINDRICAL SCREW
AM 4X12 DIN 84-4 S FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL 		001
WASHER
A 4,3 DIN 9021 FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL 		001
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL 		001
CYLINDRICAL SCREW
AM 4X12 DIN 84-4 S FOR MAIN CABLE SET AT BREATHER CROSS DUCT 		002
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE SET AT BREATHER CROSS DUCT 		002
FIXING CLAMP
FOR MAIN CABLE SET AT BREATHER CROSS DUCT 		002 A 136 995 01 37
CYLINDRICAL SCREW
AM 6X12 DIN 84-4 S FOR MAIN CABLE SET AT BREATHER CROSS DUCT 		002
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE SET AT BREATHER CROSS DUCT 		002
FIXING CLAMP
FOR MAIN CABLE SET AT AIR DUCT, RIGHT 		002 A 136 995 01 35
CYLINDRICAL SCREW
AM 6X12 DIN 84-5 S FOR MAIN CABLE SET AT AIR DUCT, RIGHT 		002
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE SET AT AIR DUCT, RIGHT 		002
062 CABLE CONNECTOR, 3 POLES
FOR BLOWER CONNECTION 		002 A 000 546 35 41
CYLINDRICAL SHEET
METAL SCREW BZ 3,9X13 DIN 7971 FOR CABLE CONNECTOR AT AIR DUCT 		004
063 CABLE HARNESS
IN JACKET TUBE FROM CHASSIS 001693 		001 A 189 540 11 09
CABLE HARNESS
IN JACKET TUBE FROM CHASSIS 001693 		001 A 189 540 14 09
CABLE HARNESS
IN JACKET TUBE FROM CHASSIS 001693
SPECIAL REQUEST, OMISSION OF LIGHT SIGNAL FOR USA 		001 A 189 540 10 09
ADDITIONAL CABLE HARNESS
FROM SLIP RING TO SWITCH FROM CHASSIS 001693 		001 A 189 540 12 09
064 CABLE HARNESS
FOR INSTRUMENT LIGHTING 		001 A 186 540 03 09
CABLE HARNESS
FOR INSTRUMENT LIGHTING 		001 A 186 540 06 09
066 CABLE HARNESS
FOR CONTROL, SPRING TIGHTENING DEVICE 		001 A 186 540 07 09
067 CABLE HARNESS
FOR CONTROL, SPRING TIGHTENING DEVICE 		001 A 186 540 12 09
068 GROMMET
FOR CABLE HARNESS THROUGH COVER, REVERSING MOTOR 		001 A 000 997 22 81
070 RUBBER PROTECTIVE CAP
FOR SPRING DRIVE 		002 A 000 546 02 35
071 CABLE HARNESS
FOR GENERATOR REGULATOR 		001 A 189 540 00 08
CABLE HARNESS
FOR GENERATOR REGULATOR 		001 A 189 540 01 08
073 TAIL LAMP CABLE HARNESS 001 A 189 540 00 07
076 FIXING CLAMP
FOR TAIL LAMP CABLE HARNESS AT FRONT WALL 		001 A 186 995 02 42
CYLINDRICAL SCREW
AM 6X15 DIN 84-4 S FOR TAIL LAMP CABLE HARNESS AT FRONT WALL 		001
LOCK WASHER
B 6 DIN 127 FOR TAIL LAMP CABLE HARNESS AT FRONT WALL 		001
079 CABLE BRACKET
FOR CABLE SET TO BLOWER SWITCH AT OPERATING LEVER 		001 A 000 546 03 43
79a RUBBER PROTECTIVE CAP
FOR TAIL LAMP CABLE SET AT OIL PRESSURE SWITCH 		002 A 000 546 02 35
080 CABLE CONNECTOR, 8 POLES 001 A 000 546 32 41
080 CABLE CONNECTOR, 8 POLES 002 A 000 546 32 41
081 CABLE CONNECTOR, 5 POLES 001 A 000 546 06 41
CYLINDRICAL SHEET
METAL SCREW BZ 3,9X19 DIN 7971 FOR CABLE CONNECTOR AT BRACKET, SIDE COVER PLATE 		002
083 CABLE CONNECTOR, 6-POLES 001 A 000 546 17 41
CYLINDRICAL SHEET
METAL SCREW BZ 3,9X13 DIN 7971 FOR CABLE CONNECTOR AT BODY FRONT END, CROSS STRUT, INSIDE, LEFT 		004
090 FUSE BOX 001 A 189 540 00 50
091 COVER 001 A 000 545 02 03
092 FUSE, 12 AMP.
8 DIN 72581 		010
093 FUSE, 35 AMP.
25 DIN 72581 		002
CYLINDRICAL SCREW
AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRONT WALL 		002
WASHER
4,3 DIN 125 FOR FUSE BOX AT FRONT WALL 		002
LOCK WASHER
B 4 DIN 127 FOR FUSE BOX AT FRONT WALL 		002
097 UNDERLAYER
FOR FUSE BOX AT FRONT WALL 		001 A 186 545 02 89
100 GROUND CABLE
FROM AUXILIARY SPRING MOTOR TO FRAME 		001 A 186 540 02 41
HEX.-HD. SCREW
M 6X10 DIN 933-8 G FOR GROUND CABLE AT FRAME 		001
LOCK WASHER
B 6 DIN 127 FOR GROUND CABLE AT FRAME 		001
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTIONS AT STEERING LOCK 		003
CYLINDRICAL SCREW
AM 5X15 DIN 84-4 S FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING 		001
LOCK WASHER
B 5 DIN 127 FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING 		001
HEX. NUT
M 5 DIN 934-5 S FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING 		001
107 GROUND CABLE
FROM CAPILLARY TUBE TO FRONT WALL 		001 A 186 540 07 41
108 GROUND CABLE
FOR EARTHING BETWEEN FRONT WALL RESP. FRAME AND ENGINE 		001 A 186 540 03 41
109 GROUND CABLE
FOR EARTHING BETWEEN FRONT WALL RESP. FRAME AND ENGINE 		001 A 186 540 04 41
HEX.-HD. SCREW
M 8X15 DIN 933-8 G FOR GROUND CABLE AT FRONT WALL 		001
SPRING WASHER
B 8 DIN 137 FOR GROUND CABLE AT FRONT WALL 		001
HEX.-HD. SCREW
M 8X18 DIN 933-8 G FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET 		001
LOCK WASHER
B 8 DIN 127 FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET 		001
HEX. NUT
M 8 DIN 934-5 S FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET 		001
111 GROUND CABLE
FOR FUEL TRANSMITTER AT END CROSS MEMBER 		001 A 136 546 01 21
HEX.-HD. TAPPING SCREW
AM 5X10 DIN 7513 FOR GROUND CABLE AT END CROSS MEMBER 		001
LOCK WASHER
B 5 DIN 127 FOR GROUND CABLE AT END CROSS MEMBER 		001
114 GROUND CABLE
BETWEEN IGNITION COIL CONDENSER AND IGNITION COIL FIXING UP TO CHASSIS 8500577 		001 A 186 540 06 41
HEX.-HD. SCREW
M 6X10 DIN 933-8 G FOR GROUND CONNECTION, AUXILIARY FUEL PUMP 		001
LOCK WASHER
B 6 DIN 127 FOR GROUND CONNECTION, AUXILIARY FUEL PUMP 		001
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA