TRANSMISSION

EPC / Mercedes / Car / FG / FG 188.014 / 26 / 013
‹ ›

№- Name A* Part number
001 TRANSMISSION, FULLY
SYNCHRONIZED WITH CLUTCH HOUSING 		001 A 188 260 02 04
002 TRANSMISSION CASE 001 A 186 260 00 11
003 CYLINDER PIN
6 H 8X16 DIN 7 GERUNDET 		002
005 REVERSE GEAR, 17 TEETH 001 A 120 260 03 25
006 BUSHING 001 A 120 263 03 50
007 REVERSE SHAFT 001 A 186 263 00 30
008 THREADED PIN
M 10X45 DIN 417-5 S WITH HARDENED PIVOT FOR SHAFT AT TRANSMISSION HOUSING 		001
009 HEX. NUT
M 10 DIN 934-5 S FOR SHAFT AT TRANSMISSION HOUSING 		001
010 INTERMEDIATE LEVER
FOR REVERSE GEAR 		001 A 136 260 00 37
011 DOWEL PIN
8X14 N 37 B 		001
012 SHIFT DOG
AT INTERM. LEVER FOR REVERSE GEAR 		001 A 136 263 00 23
013 COUNTERSHAFT WITH KEY 001 A 186 260 10 24
014 KEY 001 A 186 991 03 68
015 COUNTERSHAFT GEAR,
24 TEETH FOR 3RD GEAR 		001 A 186 263 04 13
016 COUNTERSHAFT GEAR,
28 TEETH FOR 4TH GEAR 		001 A 186 263 07 10
017 CIRCLIP
35X2 DIN 471 VERSTÄRKT ON COUNTERSHAFT 		001
018 ANNULAR GROOVED BEARING
6305 C-3 DIN 625 		002
019 SPACER 0.25 MM THICK
OPTIONAL TO ANNULAR GROOVED BEARING ON COUNTERSHAFT 		001 A 120 263 15 52
SPACER 0.50 MM THICK
OPTIONAL TO ANNULAR GROOVED BEARING ON COUNTERSHAFT 		001 A 120 263 16 52
SPACER 1.00 MM THICK
OPTIONAL TO ANNULAR GROOVED BEARING ON COUNTERSHAFT 		001 A 120 263 08 52
SPACER 0.10 MM THICK
OPTIONAL TO ANNULAR GROOVED BEARING ON COUNTERSHAFT 		001 A 120 263 14 52
020 PROTECTIVE WASHER
AT ANNULAR GROOVED BEARING, REAR 		001 A 186 990 18 40
021 DRIVE SHAFT WITH KEY 001 A 186 260 17 20
022 KEY 002 A 186 991 02 68
023 HELICAL GEAR, 19 TEETH
ON DRIVE SHAFT 		001 A 186 262 08 10
024 OIL SLINGER RING
ON DRIVE SHAFT 		001 A 186 262 00 66
025 SPACER RING
FOR BEARING, DRIVE SHAFT 		001 A 186 262 04 51
026 ANNULAR CYLINDER
ROLLER BEARING NUM 30 N/NA DIN 5412 UP TO TRANSMISSION NO. 5500738 		001
ANNULAR GROOVED BEARING
6306 ZN DIN 625 FROM TRANSMISSION NO. 5500739 		001
027 CIRCLIP
SP 72 A DIN 5417 UP TO TRANSMISSION NO. 55 00738 		001
028 ANNULAR GROOVED BEARING
6306 Z DIN 625 UP TO TRANSMISSION NO. 55 00738 		001
029 SPACER 0.3 MM THICK
OPTIONAL 184 262 03 52/04 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 184 262 00 52
SPACER 0.4 MM THICK
OPTIONAL 184 262 03 52/04 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 184 262 01 52
SPACER 0.5 MM THICK
OPTIONAL 184 262 03 52/04 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 184 262 02 52
SPACER 0.6 MM THICK
OPTIONAL WITH 184 262 00 52/0152/02 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 184 262 03 52
SPACER 0.7 MM THICK
OPTIONAL WITH 184 262 00 52/0152/02 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 184 262 04 52
29a CIRCLIP 1.9 MM
OPTIONAL FROM TRANSMISSION NO. 55 00739 		001 A 136 994 06 35
CIRCLIP 2.00 MM
OPTIONAL FROM TRANSMISSION NO. 55 00739 		001 A 136 994 09 35
CIRCLIP 2.05 MM
OPTIONAL FROM TRANSMISSION NO. 55 00739 		001 A 136 994 07 35
29b SPACER SLEEVE
FROM TRANSMISSION NO. 55 00739 		001 A 187 262 00 53
29c SPACER 0.1 MM THICK
OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION CASE FROM TRANSMISSION NO. 55 00739 		001 A 136 262 06 52
SPACER 0.2 MM THICK
OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION CASE FROM TRANSMISSION NO. 55 00739 		001 A 136 262 07 52
SPACER 0.3 MM THICK
OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION CASE FROM TRANSMISSION NO. 55 00739 		001 A 136 262 08 52
030 CIRCLIP
FOR DRIVE SHAFT 		001 A 136 262 00 94
033 MAIN SHAFT
GROOVES WITH INVOLUTE TOOTHING 		001 A 186 262 12 05
034 INSERT-TYPE KEY
ON MAIN SHAFT FOR 1ST AND 2ND GEAR 		001 A 120 262 00 81
035 SYNCHRONIZING BODY
FOR 1ST AND 2ND GEAR 		001 A 186 260 11 45
036 SYNCHRONIZING BODY 001 A 186 262 06 35
037 PRESSURE SPRING
TO SYNCHRONIZING BODY 		003 A 120 993 14 01
038 STEEL BALL 6.5 MM
III DIN 5401 		003
039 FOLLOWER 003 A 194 262 00 40
040 SLEEVE, REINFORCED
FOR 1ST AND 2ND GEAR 		001 A 186 262 05 23
041 SYNCHRONIZING RING
FOR 2ND GEAR 		001 A 186 262 07 36
41a SYNCHRONIZING RING
FOR 1ST GEAR 		001 A 186 262 14 36
042 BUTTING RING,
7.90-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 120 262 16 62
BUTTING RING,
7.95-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 120 262 17 62
BUTTING RING,
8.00-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 120 262 18 62
BUTTING RING,
8.05-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 120 262 19 62
BUTTING RING,
8.10-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 120 262 20 62
043 GUARD PLATE 4.40 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 120 262 11 62
GUARD PLATE 4.45 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 120 262 12 62
GUARD PLATE 4.50 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 120 262 13 62
GUARD PLATE 4.55 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 120 262 14 62
GUARD PLATE 4.60 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 120 262 15 62
044 HELICAL GEAR, 25 TEETH
FOR 2ND GEAR 		001 A 186 262 07 12
045 ROLLER RACE, PARTED
IN HELICAL GEAR, 2ND GEAR 		001 A 120 981 03 12
046 HELICAL GEAR, 25 TEETH
FOR 3RD GEAR 		001 A 186 260 13 44
047 GUARD PLATE
ON MAIN SHAFT FOR 3RD GEAR 		001 A 120 262 23 62
048 SYNCHRONIZING BODY
FOR 3RD AND 4TH GEAR 		001 A 120 260 04 45
049 SYNCHRONIZING BODY 001 A 120 262 08 35
050 PRESSURE SPRING 003 A 120 993 14 01
051 STEEL BALL 6.5 MM
III DIN 5401 		003
052 FOLLOWER 003 A 194 262 00 40
053 SLEEVE
FOR 3RD AND 4TH GEAR 		001 A 120 262 09 23
054 SYNCHRONIZING RING
FOR 3RD AND 4TH GEAR 		002 A 186 262 07 36
055 GROOVED NUT
ON MAIN SHAFT, FRONT 		001 A 120 262 03 26
056 LOCKING PLATE
TO GROOFED NUT 		001 A 120 994 01 15
057 ROLLER CAGE 16X24X20
OPTIONAL 		001 A 000 981 08 12
ROLLER CAGE 16X24X20
OPTIONAL 		001 A 000 981 09 12
058 HELICAL GEAR, 28 TEETH
FOR 1ST GEAR 		001 A 186 262 14 11
059 ROLLER CAGE
FOR HELICAL GEAR, 1ST GEAR 		001 A 120 981 02 12
060 GUARD PLATE 3.8 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 186 262 01 62
GUARD PLATE 3.9 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 186 262 02 62
GUARD PLATE 4.0 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 186 262 03 62
GUARD PLATE 4.1 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 186 262 04 62
GUARD PLATE 4.2 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 186 262 05 62
GUARD PLATE 4.3 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 186 262 06 62
GUARD PLATE 4.4 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 186 262 07 62
GUARD PLATE 4.5 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 186 262 08 62
061 ANNULAR GROOVED BEARING
ON MAIN SHAFT 		001 A 136 981 02 25
062 CIRCLIP
SP 72 A DIN 5417 		001
063 SPACER 0.1 MM THICK
OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 136 262 04 52
SPACER 0.2 MM THICK
OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 136 262 05 52
SPACER 0.3 MM THICK
OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 136 262 09 52
064 HELICAL GEAR, 7 TEETH
FOR SPEEDOMETER DRIVE 		001 A 120 264 07 30
065 TRANSMISSION CASE
COVER, FRONT 		001 A 186 260 03 21
066 SEALING RING
FOR DRIVE SHAFT 		001 A 186 261 00 60
067 BALL PIN
FOR RELEASE FORK 		001 A 186 991 00 15
069 HEX.-HD. SCREW
M 8X45 DIN 931 - 8 G FOR TRANSMISSION CASE COVER, FRONT AT TRANSMISSION CASE 		002
070 HEX.-HD. SCREW
M 8X20 DIN 933-8 G FOR TRANSMISSION CASE COVER, FRONT AT TRANSMISSION CASE 		004
071 LOCKING PLATE
FOR TRANSMISSION CASE COVER, FRONT AT TRANSMISSION CASE 		006 A 180 994 00 15
072 TRANSMISSION CASE
COVER, REAR INJECTION DIE-CASTING 		001 A 120 260 20 16
073 PLUG 001 A 153 264 00 55
074 SEALING RING
FOR MAIN SHAFT 		001 A 000 997 17 46
075 SEALING RING
FOR SPEEDOMETER/DRIVE SHAFT 		001 A 120 261 00 80
076 SHAFT
FOR SPEEDOMETER DRIVE 		001 A 120 264 04 32
077 SMALL DRIVE
GEAR, 16 TEETH FOR SPEEDOMETER DRIVE 		001 A 136 264 00 31
078 SPRING WASHER
B 6 DIN 137 FOR SPEEDOMETER DRIVE SHAFT AT TRANSMISSION CASE REAR 		001
079 HEX.-HD. SCREW
M 6X30 DIN 931-8 G FOR SPEEDOMETER DRIVE SHAFT AT TRANSMISSION CASE REAR 		001
080 GASKET
FOR TRANSMISSION CASE COVER, REAR AT TRANSMISSION CASE 		001 A 186 261 04 79
081 HEX.-HD. SCREW
M 8X22 DIN 933-8 G FOR TRANSMISSION CASE COVER, REAR AT TRANSMISSION CASE 		002
082 LOCKING PLATE
FOR TRANSMISSION CASE COVER, REAR AT TRANSMISSION CASE 		006 A 180 994 00 15
083 COLLAR SCREW
FOR TRANSMISSION CASE COVER, REAR AT TRANSMISSION CASE 		004 A 120 990 00 10
085 THREE-WAY FLANGE
ON MAIN SHAFT 		001 A 186 262 08 45
086 GROOVED NUT
FOR THREE-WAY FLANGE AT MAIN SHAFT 		001 A 186 262 02 26
087 LOCK
FOR THREE-WAY FLANGE AT MAIN SHAFT 		001 A 186 268 02 73
088 LOCKING SCREW
FOR OIL OUTLET AND OIL FILLING AT TRANSMISSION CASE 		002 A 186 997 00 32
092 HEX.-HD. SCREW
M 10X40 DIN 931-8 G FOR TRANSMISSION AT CYLINDER CRANKCASE 		003
093 HEX.-HD. SCREW
M 10X50 DIN 931-8 G FOR TRANSMISSION AT CYLINDER CRANKCASE 		002
094 SPRING WASHER
B 10 DIN 137 FOR TRANSMISSION AT CYLINDER CRANKCASE 		004
095 WASHER
10,5 DIN 125 FOR TRANSMISSION AT CYLINDER CRANKCASE 		003
096 LOCK WASHER
B 10 DIN 127 FOR TRANSMISSION AT CYLINDER CRANKCASE 		001
097 HEX. NUT
M 10 DIN 934-5 S FOR TRANSMISSION AT CYLINDER CRANKCASE 		002
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA