| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | STARTER BATTERY 12V/70AH |
001 | A 001 982 55 08 |
| 010 | STARTER BATTERY 12V/80AH |
001 | A 000 982 21 08 |
| 010 | STARTER BATTERY 12V/80AH ADAPT WIRING HARNESS FOR ASSEMBLY INVESTIGATION DOCUMENTARY EVIDENCE MUST BE FURNISHED AT ANY GIVEN TIME. WITH DAS4, USE XENTRY DIAGNOSTICS FOR PROGRAMMING THE DAS4 ADDITIONAL/REPLACEMENT KEY BY SELECTING "PROGRAM AND TEACH IN ADDIT IONAL KEY " OR " PROGRAM AND TEACH IN REPLACEMENT KEY". |
001 | A 001 982 81 08 |
| 010 | STARTER BATTERY 12V/80AH THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. Replaced by: A 001 982 81 08 |
001 | A 001 982 56 08 |
| 010 | STARTER BATTERY 12V/80AH THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. |
001 | A 001 982 81 08 |
| 010 | BATTERY 12V/70 AH |
001 | A 004 541 86 01 |
| 010 | STARTER BATTERY 12V/80AH |
001 | A 001 982 81 08 |
| 010 | STARTER BATTERY 12V/80AH |
001 | A 001 982 81 08 |
| 020 | PROTECTIVE CAP POS. POLE |
001 | A 001 546 08 35 |
| 020 | INSULATING CAP POS. POLE |
001 | A 000 546 54 02 |
| 030 | STOP PLUG ON BATTERY,LATERALLY 6X8 MM |
001 | A 002 997 24 86 |
| 040 | ELBOW FITTING ON BATTERY,LATERALLY |
001 | A 000 990 38 72 |
| 050 | HOSE BATTERY VENTING 5 X 1 MM ORDER BY THE METER |
NB | A 024 997 49 82 |
| 060 | BUTTON GROMMET ENGINE COMPARTMENT FEED-THROUGH |
001 | A 000 998 02 01 |
| 060 | BUTTON GROMMET ENGINE COMPARTMENT FEED-THROUGH |
001 | A 000 998 02 01 |
| 100 | AUXILIARY BATTERY BACKUP BATTERY 12V/12AH |
001 | A 000 982 96 08 |
| 110 | ELBOW FITTING BACKUP BATTERY |
002 | A 000 990 38 72 |
| 120 | HOSE BATTERY VENTING 5 X 1 MM ORDER BY THE METER |
NB | A 024 997 49 82 |
| 130 | PLUG TRANSMISSION TUNNEL FEED-THROUGH 11 MM |
001 | A 000 998 18 50 |
| 130 | PLUG TRANSMISSION TUNNEL FEED-THROUGH 11 MM |
002 | A 000 998 18 50 |
| 130 | PLUG TRANSMISSION TUNNEL FEED-THROUGH 11 MM |
002 | A 000 998 18 50 |
| 150 | BRACKET BACKUP BATTERY |
001 | A 246 545 04 40 |
| 150 | BRACKET BACKUP BATTERY |
001 | A 246 545 07 00 |
| 150 | BRACKET BACKUP BATTERY |
001 | A 246 540 24 03 |
| 160 | NUT BRACKET MOUNTING M6 |
003 | N 000000 003477 |
| 170 | COVER BACKUP BATTERY FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. Replaced by: A 246 541 00 00 |
001 | A 246 541 03 05 |
| 170 | BATTERY COVER BACKUP BATTERY |
001 | A 246 541 00 00 |
| 200 | GROUND LINE W SENSOR NEGATIVE LINE WITH BATTERY SENSOR |
001 | A 166 542 00 18 |
| 200 | BATTERY SENSOR NEGATIVE LINE WITH BATTERY SENSOR |
001 | A 166 905 60 01 |
| 200 | BATTERY SENSOR NEGATIVE LINE WITH BATTERY SENSOR |
001 | A 166 905 60 01 |
| 210 | ELECTRICAL WIRING HARNESS BATTERY TERMINAL CLAMP WITH PYROFUSE TO STARTER |
001 | A 246 540 78 32 |
| 210 | ELECTRICAL WIRING HARNESS BATTERY TERMINAL CLAMP WITH PYROFUSE TO STARTER |
001 | A 246 540 77 32 |
| 210 | ELECTRICAL WIRING HARNESS BATTERY TERMINAL CLAMP WITH PYROFUSE TO STARTER |
001 | A 246 540 59 33 |
| 210 | ELECTRICAL WIRING HARNESS BATTERY TERMINAL CLAMP WITH PYROFUSE TO STARTER |
001 | A 246 540 57 33 |
| 220 | ELECTRICAL WIRING HARNESS ALTERNATOR TO PREFUSE BOX |
001 | A 246 540 05 08 |
| 230 | BRACKET CABLE HARNESS MOUNTING |
001 | A 203 546 26 43 |
| 250 | ELECTRICAL WIRING HARNESS FROM TRANSMISSION TO BODY |
001 | A 246 540 03 35 |
| 300 | HEXALOBULAR BOLT FASTENING, WIRING HARNESS TO BATTERY BOX M6X12 |
001 | N 910143 006000 |
| 300 | HEXALOBULAR BOLT FASTENING OF WIRING HARNESS AT TRANSMISSION M8X16 |
001 | N 000000 001138 |
| 300 | HEXALOBULAR BOLT FASTENING, WIRING HARNESS TO CROSSMEMBER M5X12 |
001 | N 000000 003251 |
| 310 | NUT FASTENING, CIRCUIT 30 LINE AT ALTERNATOR M8 |
001 | A 000 548 04 72 |
| 320 | PROTECTIVE CAP CONTACT PROTECTION FOR CIRCUIT 30, ALTERNATOR -M133 |
001 | A 001 546 61 35 |
| 350 | NUT WIRING HARNESS MOUNTING, CIRCUIT 30 TO STARTER M8 |
001 | A 000 548 04 72 |
| 350 | HEXAGON NUT FASTENING WIRING HARNESS CIRCUIT 50 TO STARTER M6 |
001 | N 910112 006001 |
| 360 | PROTECTIVE CAP PROTECTION AGAINST ACCIDENTAL CONTACTFOR CIRCUIT 30, STARTER |
001 | A 001 546 61 35 |
| 370 | BRACKET STARTING CABLE TO TRANSMISSION |
001 | A 651 159 13 40 |
| 380 | NUT ELECTRIC CABLE MOUNTING M8 |
001 | N 000000 008271 |
| 450 | BRACKET ALTERNATOR WIRING HARNESS TO REFRIGERANT COMPRESSOR |
001 | A 270 159 01 40 |
| 600 | ELECTRICAL WIRING HARNESS BACKUP BATTERY |
001 | A 246 540 65 07 |
| 600 | ELECTRICAL WIRING HARNESS BACKUP BATTERY FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. WITH STANDARD BUMPER, PAINT PARKTRONIC SENSOR IN 7129 Replaced by: A 246 540 65 07 |
001 | A 246 540 95 02 |
| 600 | ELECTRICAL WIRING HARNESS BACKUP BATTERY |
001 | A 246 540 65 07 |
| 600 | ELECTRICAL WIRING HARNESS BACKUP BATTERY |
001 | A 246 540 26 01 |
| 600 | ELECTRICAL WIRING HARNESS | 001 | A 246 540 26 01 |
| 600 | ELECTRICAL WIRING HARNESS BACKUP BATTERY |
001 | A 246 540 65 07 |
| 610 | ELECTRICAL WIRING HARNESS GROUND LEAD FROM BATTERY TO BODY |
001 | A 246 540 63 32 |
| 610 | ELECTRICAL WIRING HARNESS GROUND LEAD FROM BATTERY TO BODY FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. WITH STANDARD BUMPER, PAINT PARKTRONIC SENSOR IN 7129 Replaced by: A 246 540 63 32 |
001 | A 246 540 97 02 |
| 610 | ELECTRICAL WIRING HARNESS GROUND LEAD FROM BATTERY TO BODY |
001 | A 246 540 63 32 |
| 610 | ELECTRICAL WIRING HARNESS GROUND LEAD FROM BATTERY TO BODY |
001 | A 246 540 63 32 |
| 700 | NUT SPECIAL SHAPE JUMP START NEGATIVE TERMINAL |
001 | A 001 990 85 52 |
| 720 | BATTERY BATTERY BACKUP 1.2AH |
001 | N 000000 004039 |
| 730 | CURRENT LIMITER BATTERY BACKUP |
001 | A 246 906 96 00 |
| 900 | RS ELECT. WIRING HARNESS BATTERY TERMINAL PYROFUSE F39 ALSO ORDER: TERMINAL BLOCK 2 X A 001 546 99 41; CABLE TIE 5 X A 002 997 24 90 |
001 | A 204 440 18 54 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy