MOVING PARTS

EPC / Mercedes / Bus / M / M 353.909 / 03 / 001
‹ ›

№- Name A* Part number
001 CRANKSHAFT

FOR RANGE OF APPLICABILITY,SEE 000 477 46 01 		- A 352 030 07 01
CRANKSHAFT
Replaced by: A 352 030 16 02 		- A 352 030 56 01
CRANKSHAFT
Replaced by: A 352 030 38 02 		- A 352 030 16 02
CRANKSHAFT
Replaced by: A 352 030 39 02 		- A 352 030 38 02
001 CRANKSHAFT
Replaced by: A 352 030 69 02 		- A 352 030 39 02
001 CRANKSHAFT
Replaced by: A 352 030 74 02 		- A 352 030 69 02
001 CRANKSHAFT
WITH BEARING SHELLS

909,910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

UP TO ENGINE 473680 YEAR OF MANUFACTURE 1977 		001 A 352 030 74 02
COUNTERWEIGHT

UP TO ENGINE 366904 YEAR OF MANUFACTURE 1975
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE
Replaced by: A 352 031 05 07 		- A 352 031 02 07
003 COUNTERWEIGHT
CRANKSHAFT 65 MM

FROM ENGINE 366905-999999 YEAR OF MANUFACTURE 1975-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 352 031 05 07
COUNTERWEIGHT

UP TO ENGINE 366904 YEAR OF MANUFACTURE 1975
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE
Replaced by: A 352 031 06 07 		- A 352 031 03 07
003 COUNTERWEIGHT
CRANKSHAFT 61 MM

FROM ENGINE 366905-999999 YEAR OF MANUFACTURE 1975-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 352 031 06 07
005 SCREW
COUNTERWEIGHT TO CRANKSHAFT

UP TO ENGINE 740566 YEAR OF MANUFACTURE 1983 		012 A 352 031 01 71
005 SCREW
COUNTERWEIGHT TO CRANKSHAFT
FROM ENGINE 740567-999999 YEAR OF MANUFACTURE 1983-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
012 A 366 031 01 71
007 BALL BEARING
DRIVE SHAFT TO CRANKSHAFT 		001 N 000625 006204
009 COVER RING
DRIVE SHAFT TO CRANKSHAFT 		001 A 312 031 05 33
011 CRANKSHAFT GEAR 001 A 352 052 00 03
013 WOODRUFF KEY
CRANKSHAFT GEAR TO CRANKSHAFT 		001 N 006888 008001
015 INTERMEDIATE PIECE
VIBRATION ABSORBER 		001 A 314 035 02 14
017 VIBRATION ABSORBER
Replaced by: A 352 030 45 03 		- A 352 030 35 03
017 VIBRATION ABSORBER
UP TO ENGINE 725961 YEAR OF MANUFACTURE 1982
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 030 62 03 		- A 352 030 45 03
017 VIBRATION ABSORBER
ONE-GROOVE 		001 A 352 030 62 03
023 WOODRUFF KEY
VIBRATION ABSORBER TO CRANKSHAFT

FOR RANGE OF APPLICABILITY,SEE 000 477 46 01 		001 N 006888 008003
034 SCREW
VIBRATION ABSORBER TO CRANKSHAFT

FOR RANGE OF APPLICABILITY,SEE 000 477 46 01 		001 A 321 990 18 01
034 SCREW
VIBRATION ABSORBER TO CRANKSHAFT

909,910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630 		001 A 314 990 10 01
040 REPAIR KIT
88.00-MM PIVOT;LAPPED BEARING WIDTH, 31.80 MM;STANDARD
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		001 A 322 586 24 03
REPAIR KIT
87.90-MM PIVOT;LAPPED BEARING WIDTH, 31.80 MM;STANDARD SIZE I
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 25 03
REPAIR KIT
87.75-MM PIVOT;LAPPED BEARING WIDTH, 31.80 MM;REPAIR SIZE I
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 26 03
REPAIR KIT
87.75-MM PIVOT;LAPPED BEARING WIDTH, 32.10 MM;REPAIR SIZE I
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 27 03
REPAIR KIT
87.75-MM PIVOT;LAPPED BEARING WIDTH, 32.30 MM;REPAIR SIZE I
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 28 03
REPAIR KIT
87.50-MM PIVOT;LAPPED BEARING WIDTH, 31.80 MM;REPAIR SIZE II
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 29 03
REPAIR KIT
87.50-MM PIVOT;LAPPED BEARING WIDTH, 32.10 MM;REPAIR SIZE II
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 30 03
REPAIR KIT
87.50-MM PIVOT;LAPPED BEARING WIDTH, 32.30 MM;REPAIR SIZE II
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 31 03
REPAIR KIT
87.25-MM PIVOT;LAPPED BEARING WIDTH, 31.80 MM;REPAIR SIZE III
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 32 03
REPAIR KIT
87.25-MM PIVOT;LAPPED BEARING WIDTH, 32.30 MM;REPAIR SIZE III
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 33 03
REPAIR KIT
87.00-MM PIVOT;LAPPED BEARING WIDTH, 31.80 MM;REPAIR SIZE IV
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 34 03
REPAIR KIT
87.00-MM PIVOT;LAPPED BEARING WIDTH, 32.30 MM;REPAIR SIZE IV
353.910 UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630

912,914 FROM ENGINE 010373 EXCEPT FOR 010497-010630 		- A 322 586 35 03
REPAIR KIT
Replaced by: A 352 030 00 40 		- A 352 586 30 03
040 CRANKSHAFT BEARING
Replaced by: A 352 030 07 40 		- A 352 030 00 40
040 CRANKSHAFT BEARING
Replaced by: A 366 030 10 40 		- A 352 030 07 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;STANDARD

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 10 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;STANDARD

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 03 40
040 REPAIR KIT
Replaced by: A 352 030 01 40 		- A 352 586 31 03
040 CRANKSHAFT BEARING
Replaced by: A 352 030 08 40 		- A 352 030 01 40
040 CRANKSHAFT BEARING
Replaced by: A 366 030 11 40 		- A 352 030 08 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 0.10

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 11 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 0.10

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 04 40
040 REPAIR KIT
Replaced by: A 352 030 02 40 		- A 352 586 32 03
040 REPAIR KIT
ORDER WATER PUMP REPAIR KIT 352 200 14 04
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
NOT INCLUDED IN RANGE OF DELIVERY OF:005 154 33 02
Replaced by: A 352 586 36 03 		- A 352 586 03 03
040 REPAIR KIT
Replaced by: A 352 030 02 40 		- A 352 586 36 03
040 REPAIR KIT
ORDER WATER PUMP REPAIR KIT 352 200 14 04
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
NOT INCLUDED IN RANGE OF DELIVERY OF:005 154 33 02
Replaced by: A 352 586 37 03 		- A 352 586 04 03
040 REPAIR KIT
Replaced by: A 352 030 02 40 		- A 352 586 37 03
040 CRANKSHAFT BEARING
Replaced by: A 352 030 09 40 		- A 352 030 02 40
040 CRANKSHAFT BEARING
Replaced by: A 366 030 12 40 		- A 352 030 09 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 0.25

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 12 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 0.25

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 05 40
040 REPAIR KIT
Replaced by: A 352 030 03 40 		- A 352 586 33 03
040 REPAIR KIT
ORDER WATER PUMP REPAIR KIT 352 200 14 04
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
NOT INCLUDED IN RANGE OF DELIVERY OF:005 154 33 02
Replaced by: A 352 586 38 03 		- A 352 586 06 03
040 REPAIR KIT
Replaced by: A 352 030 03 40 		- A 352 586 38 03
040 REPAIR KIT
ORDER WATER PUMP REPAIR KIT 352 200 14 04
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
NOT INCLUDED IN RANGE OF DELIVERY OF:005 154 33 02
Replaced by: A 352 586 39 03 		- A 352 586 07 03
040 REPAIR KIT
Replaced by: A 352 030 03 40 		- A 352 586 39 03
040 CRANKSHAFT BEARING
Replaced by: A 352 030 10 40 		- A 352 030 03 40
040 CRANKSHAFT BEARING
Replaced by: A 366 030 13 40 		- A 352 030 10 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 0.50

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 13 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 0.50

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 06 40
040 REPAIR KIT
Replaced by: A 352 030 04 40 		- A 352 586 34 03
040 REPAIR KIT
ORDER WATER PUMP REPAIR KIT 352 200 14 04
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
NOT INCLUDED IN RANGE OF DELIVERY OF:005 154 33 02
Replaced by: A 352 586 40 03 		- A 352 586 09 03
040 REPAIR KIT
Replaced by: A 352 030 04 40 		- A 352 586 40 03
040 CRANKSHAFT BEARING
Replaced by: A 352 030 11 40 		- A 352 030 04 40
040 CRANKSHAFT BEARING
Replaced by: A 366 030 14 40 		- A 352 030 11 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 14 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 0.75

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 07 40
040 REPAIR KIT
Replaced by: A 352 030 05 40 		- A 352 586 35 03
040 REPAIR KIT
ORDER WATER PUMP REPAIR KIT 352 200 14 04
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
NOT INCLUDED IN RANGE OF DELIVERY OF:005 154 33 02
Replaced by: A 352 586 41 03 		- A 352 586 11 03
040 REPAIR KIT
Replaced by: A 352 030 05 40 		- A 352 586 41 03
040 CRANKSHAFT BEARING
Replaced by: A 352 030 12 40 		- A 352 030 05 40
040 CRANKSHAFT BEARING
Replaced by: A 366 030 15 40 		- A 352 030 12 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 1.00

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 15 40
040 CRANKSHAFT BEARING
MAIN BEARING PARTS KIT;FITTING SIZE 1.00

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 366 030 08 40
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT,STANDARD

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 38 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.10/31.80

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 39 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.25/31.80

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 40 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.25/32.10

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 44 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.25/32.30

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 46 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.50/31.80

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 41 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.50/32.10

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 45 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.50/32.30

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 47 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.75/31.80

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 42 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 0.75/32.30

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 48 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 1.00/31.80

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 43 45
043 CRANKSHAFT BEARING
LAPPED BEARING PARTS KIT FITTING SIZE 1.00/32.30

FROM ENGINE 010373 EXCEPT FOR 010497-010630
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		001 A 352 030 49 45
048 FLYWHEEL
WITH RING GEAR

UP TO ENGINE 010372 ALSO INSTALLED ON 010497-010630 		001 A 352 030 26 05
048 FLYWHEEL
WITH RING GEAR
909,910 FROM ENGINE 021789 ALSO INSTALLED ON
001 A 352 030 39 05
049 RING GEAR
909,910 FROM ENGINE 021789 ALSO INSTALLED ON

TAPPED HOLES TO BE MADE ONLY AFTER PART HAS BEEN FITTED 		001 A 352 032 11 05
049 RING GEAR
TO 352 030 05 05,352 030 26 05
TAPPED HOLES TO BE MADE ONLY AFTER PART HAS BEEN FITTED 		001 A 352 032 06 05
051 SCREW
ONLY REPLACEABLE BY THE SET
Replaced by: A 366 990 05 01 		- A 352 990 22 01
051 SCREW
FLYWHEEL TO CRANKSHAFT 		008 A 366 990 05 01
CONNECTING ROD

FROM ENGINE 010373,SEE GROUP 09
FROM ENGINE 002428-002471,SEE SERVICE INFORMATION 07/6 VOM 12.07.1968

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 030 39 20 		- A 352 030 12 20
CONNECTING ROD

FROM ENGINE 010373,SEE GROUP 09
FROM ENGINE 002428-002471,SEE SERVICE INFORMATION 07/6 VOM 12.07.1968

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 030 39 20 		- A 352 030 14 20
CONNECTING ROD

FROM ENGINE 010373,SEE GROUP 09
FROM ENGINE 002428-002471,SEE SERVICE INFORMATION 07/6 VOM 12.07.1968

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 030 39 20 		- A 352 030 27 20
CONNECTING ROD
Replaced by: A 352 030 49 20 		- A 352 030 39 20
CONNECTING ROD

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 030 57 20 		- A 352 030 49 20
CONNECTING ROD
FROM ENGINE 171983 YEAR OF MANUFACTURE 1991
FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 430461 YEAR OF MANUFACTURE 1996

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 366 030 21 20 		- A 352 030 57 20
060 CONNECTING ROD
FROM ENGINE 730881-999999 YEAR OF MANUFACTURE 1982-1990

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 366 030 35 20 		- A 366 030 25 20
060 CONNECTING ROD
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART 		006 A 366 030 35 20
PISTON PIN BUSHING
UP TO ENGINE 668135 YEAR OF MANUFACTURE 1981
Replaced by: A 352 038 21 50 		- A 352 038 17 50
062 PISTON PIN BUSHING
O.D.,39MM;STANDARD 		006 A 352 038 21 50
PISTON PIN BUSHING
UP TO ENGINE 668135 YEAR OF MANUFACTURE 1981
Replaced by: A 352 038 26 50 		- A 352 038 18 50
062 PISTON PIN BUSHING
O.D.,39.2MM;REPAIR SIZE I 		006 A 352 038 26 50
PISTON PIN BUSHING
UP TO ENGINE 668135 YEAR OF MANUFACTURE 1981
Replaced by: A 352 038 27 50 		- A 352 038 19 50
062 PISTON PIN BUSHING
O.D.,39.5MM; REPAIR SIZE II 		006 A 352 038 27 50
064 CYLINDER PIN
FROM ENGINE 760549-999999 YEAR OF MANUFACTURE 1983-1990

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		012 N 000007 006100
068 SCREW
TOP

FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 792483 YEAR OF MANUFACTURE 1984
FROM ENGINE 954,972 100001 YEAR OF MANUFACTURE 1990 		006 A 352 038 19 71
SCREW

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990

UP TO ENGINE 844692 YEAR OF MANUFACTURE 1986
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE
Replaced by: A 352 038 27 71 		- A 352 038 18 71
068 SCREW
TOP

FROM ENGINE 844693-999999 YEAR OF MANUFACTURE 1986-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
FROM ENGINE 760549-999999 YEAR OF MANUFACTURE 1983-1990

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 352 038 27 71
068 SCREW
UP TO ENGINE 849318 YEAR OF MANUFACTURE 1987
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
012 A 906 038 01 71
070 SCREW
BOTTOM

FROM ENGINE 010373,SEE GROUP 09 		006 A 352 038 17 71
070 SCREW
BOTTOM

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
FROM ENGINE 760549-999999 YEAR OF MANUFACTURE 1983-1990

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 352 038 22 71
NUT
THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE
Replaced by: A 352 038 05 72 		- A 322 038 00 72
072 NUT
FROM ENGINE 760549-999999 YEAR OF MANUFACTURE 1983-1990

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990 		006 A 352 038 05 72
075 REPAIR KIT
STANDARD 60.00 MM

FROM ENGINE 010373,SEE GROUP 09 		001 A 322 586 36 03
075 REPAIR KIT
STANDARD SIZE I 59.90 MM

FROM ENGINE 010373,SEE GROUP 09 		001 A 322 586 37 03
075 REPAIR KIT
REPAIR SIZE I 59.75 MM

FROM ENGINE 010373,SEE GROUP 09 		001 A 322 586 38 03
075 REPAIR KIT
REPAIR SIZE II 59.50 MM

FROM ENGINE 010373,SEE GROUP 09 		001 A 322 586 39 03
075 REPAIR KIT
REPAIR SIZE III 59.25 MM

FROM ENGINE 010373,SEE GROUP 09 		001 A 322 586 40 03
075 REPAIR KIT
REPAIR SIZE IV 59.00 MM

FROM ENGINE 010373,SEE GROUP 09 		001 A 322 586 41 03
075 CONNECTG.ROD BEARG.SHELL

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
UP TO ENGINE 937666 YEAR OF MANUFACTURE 1989
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 038 38 10 		- A 352 038 21 10
075 CONNECTG.ROD BEARG.SHELL
STANDARD VERSION 		012 A 352 038 38 10
075 CONNECTG.ROD BEARG.SHELL
STANDARD VERSION 		012 A 366 038 02 10
075 CONNECTG.ROD BEARG.SHELL

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
UP TO ENGINE 937666 YEAR OF MANUFACTURE 1989
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 038 39 10 		- A 352 038 07 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 0.10 		012 A 352 038 39 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 0.10 		012 A 366 038 04 10
075 CONNECTG.ROD BEARG.SHELL

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
UP TO ENGINE 937666 YEAR OF MANUFACTURE 1989
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 038 40 10 		- A 352 038 22 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 0.25 		012 A 352 038 40 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 0.25 		012 A 366 038 05 10
075 CONNECTG.ROD BEARG.SHELL

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
UP TO ENGINE 937666 YEAR OF MANUFACTURE 1989
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 038 41 10 		- A 352 038 24 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 0.50 		012 A 352 038 41 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 0.50 		012 A 366 038 06 10
075 CONNECTG.ROD BEARG.SHELL

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
UP TO ENGINE 937666 YEAR OF MANUFACTURE 1989
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 038 42 10 		- A 352 038 25 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 0.75 		012 A 352 038 42 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 0.75 		012 A 366 038 07 10
075 CONNECTG.ROD BEARG.SHELL

FROM ENGINE 316007-999999 YEAR OF MANUFACTURE 1974-1990
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
UP TO ENGINE 937666 YEAR OF MANUFACTURE 1989
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 038 43 10 		- A 352 038 26 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 1.00 		012 A 352 038 43 10
075 CONNECTG.ROD BEARG.SHELL
FITTING SIZE 1.00 		012 A 366 038 08 10
076 PISTON
REPAIR; CYLINDER CRANKCASE WITH DRY LINERS; FITTING SIZE I; HEIGHT: 64.9 MM, 97.000 MM 		006 A 352 030 80 19
076 PISTON
REPAIR; CYLINDER CRANKCASE WITH DRY LINERS; FITTING SIZE II; HEIGHT: 64.6 MM, 97.000 MM 		006 A 352 030 81 19
076 PISTON
REPAIR; CYLINDER CRANKCASE WITH DRY LINERS; FITTING SIZE III; HEIGHT: 64.3 MM, 97.000 MM 		006 A 352 030 82 19
080 PISTON
STANDARD 97.000 MM 		006 A 352 030 57 19
PISTON RING
FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 740566 YEAR OF MANUFACTURE 1983
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 352 030 04 24 		- A 352 030 03 24
081 PISTON RING
PARTS KIT,STANDARD 97.000 MM 		006 A 352 030 04 24
PISTON RING
FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 740566 YEAR OF MANUFACTURE 1983
FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 366 037 16 19 		- A 000 037 45 19
082 PISTON RING
NO.1 		006 A 366 037 16 19
084 PISTON RING
NO. 2 		- A 004 037 50 19
086 PISTON RING
NO.3 		- A 366 037 00 18
090 PISTON PIN
FROM ENGINE 849319-999999 YEAR OF MANUFACTURE 1987-1990

FROM ENGINE 100001 YEAR OF MANUFACTURE 1990
Replaced by: A 362 037 00 20 		- A 352 037 04 20
090 PISTON PIN
DIA., 36 MM 		006 A 362 037 00 20
RETAINING RING
THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE
Replaced by: A 000 994 14 37 		- N 000472 036000
092 SNAP RING 012 A 000 994 14 37
096 PISTON
STANDARD SIZE I 97.075 MM 		006 A 352 030 58 19
096 PISTON
STANDARD SIZE II 97.125 MM 		006 A 352 030 59 19
096 PISTON
REPAIR SIZE I 97.500 MM 		006 A 352 030 60 19
PISTON
REPAIR SIZE II 98.000 MM 		006 A 352 030 24 19
099 PISTON RING
NO.1; 97.100 MM 		006 A 366 037 17 19
099 PISTON RING
NO.1; 97.500 MM 		006 A 366 037 29 19
099 PISTON RING
NO.1; 97.500 MM 		006 A 366 037 30 19
099 PISTON RING
NO.1; 98.000 MM 		006 A 366 037 19 19
102 PISTON RING
NO.2; 97.100 MM 		006 A 004 037 51 19
102 PISTON RING
NO.2; 97.500 MM 		006 A 004 037 52 19
102 PISTON RING
NO.2; 98.000 MM 		006 A 004 037 53 19
105 PISTON RING
NO.3; 97.100 MM 		006 A 366 037 05 18
105 PISTON RING
NO.3; 97.500 MM 		006 A 366 037 01 18
105 PISTON RING
NO.3; 98.000 MM 		006 A 366 037 03 18
108 PISTON PIN 006 A 362 037 00 20
RETAINING RING
THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE
Replaced by: A 000 994 14 37 		- N 000472 036000
112 SNAP RING 012 A 000 994 14 37
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA