WebAutoCats autoparts catalog

TRANSMISSION SHAFTS AND GEARS

EPC / Mercedes / Bus / GM / GM 712.641 / 26 / 150

WebAutoCats Parts catalogs

‹ ›

№-	Name	A*	Part number
005	DRIVE SHAFT ONLY VALID IN LATIN AMERICA TO BE ORDERED ONLY FROM MBB	001	A 694 262 00 02
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 3.90 MM	001	A 970 262 11 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 3.95 MM	001	A 970 262 31 52
011	COMPENSATING DISC DRIVE SHAFT;AS REQUIRED 4.00 MM	001	A 970 262 12 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.05 MM	001	A 970 262 23 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.10 MM	001	A 970 262 13 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.15 MM	001	A 970 262 24 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.20 MM	001	A 970 262 14 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.25 MM	001	A 970 262 25 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.30 MM	001	A 970 262 15 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.35 MM	001	A 970 262 26 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED	001	A 970 262 16 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.45 MM	001	A 970 262 32 52
011	COMPENSATING DISC DRIVE SHAFT;AS REQUIRED 4.50 MM	001	A 970 262 17 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.55 MM	001	A 970 262 33 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.60 MM	001	A 970 262 18 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.65 MM	001	A 970 262 34 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.70 MM	001	A 970 262 19 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.75 MM	001	A 970 262 35 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.80 MM	001	A 970 262 20 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.85 MM	001	A 970 262 36 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.90 MM	001	A 970 262 21 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 4.95 MM	001	A 970 262 37 52
011	SPACER WASHER DRIVE SHAFT;AS REQUIRED 5.00 MM	001	A 970 262 22 52
014	MAIN SHAFT	001	A 970 262 04 05
017	NEEDLE BEARING 2ND SPEED GEAR	001	A 018 981 96 10
017	NEEDLE BEARING 2ND SPEED GEAR	001	A 018 981 58 10
020	GEAR 2ND SPEED Z=45 / Z=58 ONLY VALID IN LATIN AMERICA	001	A 695 262 00 12
023	SYNCHRONIZER CONE 1ST AND 2ND SPEED Z=24	002	A 970 262 38 37
026	SYNCHRONIZER CONE 1ST AND 2ND SPEED	002	A 970 262 02 37
026	SYNCHRONIZER CONE 1ST AND 2ND SPEED D. 148 MM	002	A 970 262 34 37
029	SYNCHRONIZER RING 1ST AND 2ND SPEED D. 155 MM	002	A 970 262 30 34
032	SYNCHRONIZER RING 1ST SPEED Z=57 / Z=46 ONLY VALID IN LATIN AMERICA	001	A 694 262 02 34
035	SYNCHRONIZER RING 2ND SPEED GEAR Z=57 / Z=58 ONLY VALID IN LATIN AMERICA	001	A 694 262 03 34
038	SYNCHRONIZER BODY 1ST AND 2ND SPEED Z= 40 / Z=57 ONLY VALID IN LATIN AMERICA	001	A 694 262 02 35
041	SLIDING COLLAR 1ST AND 2ND SPEED Z=57 ONLY VALID IN LATIN AMERICA	001	A 694 262 00 23
044	SPRING SLIDING COLLAR	003	A 970 993 46 01
044	SPRING SLIDING COLLAR	003	A 970 993 64 01
047	PIN SLIDING COLLAR	003	A 970 262 02 74
050	LOCK GEAR; AS REQUIRED 2.29 MM	001	A 970 994 44 41
050	LOCK GEAR; AS REQUIRED 2.34 MM	001	A 970 994 10 41
050	LOCK GEAR; AS REQUIRED 2.39 MM	001	A 970 994 11 41
050	LOCK GEAR; AS REQUIRED 2.44 MM	001	A 970 994 12 41
050	RETAINING RING SYNCHRONIZER BODY TO MAIN SHAFT 2.50 MM	001	N 000471 078000
053	NEEDLE BEARING 1ST SPEED GEAR	001	A 017 981 50 10
053	NEEDLE BEARING 1ST SPEED GEAR	001	A 017 981 51 10
053	NEEDLE BEARING 1ST SPEED GEAR	001	A 017 981 62 10
053	NEEDLE BEARING 1ST SPEED GEAR	001	A 018 981 53 10
056	GEAR 1ST SPEED Z=50 / Z=46 ONLY VALID IN LATIN AMERICA	001	A 695 262 00 11
056	GEAR 1ST SPEED Z=50 / Z=46	001	A 976 262 14 11
059	SYNCHRONIZER BODY REVERSE SPEED Z=32 / Z=27 ONLY VALID IN LATIN AMERICA	001	A 694 262 00 35
062	SNAP RING REVERSE SPEED;AS REQUIRED 1.88 MM	001	A 970 262 01 94
062	SNAP RING REVERSE SPEED;AS REQUIRED 1.92 MM	001	A 970 262 02 94
062	SNAP RING REVERSE SPEED;AS REQUIRED 1.96 MM	001	A 970 262 03 94
062	SNAP RING REVERSE SPEED;AS REQUIRED 2.00 MM	001	A 970 262 04 94
062	SNAP RING REVERSE SPEED;AS REQUIRED 2.04 MM	001	A 970 994 00 40
062	SNAP RING REVERSE SPEED;AS REQUIRED 2.08 MM	001	A 970 994 01 40
065	NEEDLE BEARING REVERSE SPEED GEAR	001	A 019 981 53 10
065	NEEDLE BEARING REVERSE SPEED GEAR	001	A 019 981 57 10
068	DOG CLUTCH GEAR REVERSE SPEED Z=47 / Z=27 ONLY VALID IN LATIN AMERICA	001	A 695 262 02 33
071	NEEDLE BEARING 3RD SPEED GEAR	001	A 018 981 96 10
071	NEEDLE BEARING 3RD SPEED GEAR	001	A 018 981 58 10
074	IDLER GEAR 3RD GEAR 3RD SPEED Z=47 / Z=44 ONLY VALID IN LATIN AMERICA	001	A 694 262 00 13
077	SYNCHRONIZER CONE 3RD AND 4TH SPEED 140 MM	002	A 970 262 39 37
080	SYNCHRONIZER CONE 3RD AND 4TH SPEED 133 MM	002	A 970 262 19 37
080	SYNCHRONIZER CONE 3RD AND 4TH SPEED 133 MM	002	A 970 262 35 37
083	SYNCHRONIZER RING 3RD SPEED Z=66 / Z=44	001	A 970 262 25 34
086	SYNCHRONIZER RING 4TH SPEED Z=66 / Z=54	001	A 970 262 24 34
089	SYNCHRONIZER RING 3RD AND 4TH SPEED 140 MM	002	A 970 262 31 34
092	SYNCHRONIZER BODY 3RD AND 4TH SPEED Z=40 / Z=66 ONLY VALID IN LATIN AMERICA	001	A 694 262 03 35
095	SLIDING COLLAR 3RD AND 4TH SPEED Z=66 ONLY VALID IN LATIN AMERICA	001	A 694 262 01 23
098	SPRING SYNCHRONIZER BODY	003	A 970 993 46 01
098	SPRING SYNCHRONIZER BODY	003	A 970 993 64 01
101	PIN SYNCHRONIZER BODY	003	A 970 262 02 74
104	LOCK GEAR; AS REQUIRED 2.29 MM	001	A 970 994 44 41
104	LOCK GEAR; AS REQUIRED 2.34 MM	001	A 970 994 10 41
104	LOCK GEAR; AS REQUIRED 2.39 MM	001	A 970 994 11 41
104	LOCK GEAR; AS REQUIRED 2.44 MM	001	A 970 994 12 41
104	RETAINING RING GEAR; AS REQUIRED 2.50 MM	001	N 000471 078000
107	NEEDLE BEARING 4TH SPEED GEAR	001	A 017 981 57 10
107	NEEDLE BEARING 4TH SPEED GEAR	001	A 018 981 95 10
107	NEEDLE BEARING 4TH SPEED GEAR	001	A 017 981 55 10
107	NEEDLE BEARING 4TH SPEED GEAR	001	A 017 981 56 10
110	GEAR 4TH SPEED Z=35 / Z=54 ONLY VALID IN LATIN AMERICA	001	A 695 262 00 14
113	SPACER WASHER 4TH SPEED GEAR	001	A 970 262 01 62
113	THRUST WASHER 4TH SPEED GEAR	001	A 694 262 00 62
116	SNAP RING MAINSHAFT; AS REQUIRED 2.88 MM	001	A 970 262 09 94
116	SNAP RING MAINSHAFT; AS REQUIRED 2.92 MM	001	A 970 262 08 94
116	SNAP RING MAINSHAFT; AS REQUIRED 2.96 MM	001	A 970 262 07 94
116	SNAP RING MAINSHAFT; AS REQUIRED 3.00 MM	001	A 970 262 06 94
116	SNAP RING MAINSHAFT; AS REQUIRED 3.05 MM	001	A 970 262 15 94
116	SNAP RING MAINSHAFT; AS REQUIRED 3.10 MM	001	A 970 262 16 94
116	SNAP RING MAINSHAFT; AS REQUIRED 3.15 MM	001	A 970 262 17 94
119	NEEDLE BEARING 5TH SPEED GEAR	001	A 014 981 06 10
119	NEEDLE BEARING 5TH SPEED GEAR	001	A 018 981 97 10
122	GEAR 5TH SPEED ONLY VALID IN LATIN AMERICA TO BE ORDERED ONLY FROM MBB	001	A 694 262 01 15
128	SYNCHRONIZER RING 5TH SPEED ONLY VALID IN LATIN AMERICA TO BE ORDERED ONLY FROM MBB	001	A 694 262 00 34
134	SYNCHRONIZER CONE 5TH AND 6TH SPEED	002	A 970 262 15 37
134	SYNCHRONIZER CONE 5TH AND 6TH SPEED Z=60	002	A 970 262 30 37
137	SYNCHRONIZER RING CONSTANT GEAR Z=60 / Z=46 ONLY VALID IN LATIN AMERICA	001	A 694 262 01 34
140	SYNCHRONIZER BODY 5TH AND 6TH SPEED ONLY VALID IN LATIN AMERICA TO BE ORDERED ONLY FROM MBB	001	A 694 262 01 35
143	SLIDING COLLAR 5TH AND 6TH SPEED Z=60 ONLY VALID IN LATIN AMERICA	001	A 694 262 02 23
146	SPRING SYNCHRONIZER BODY	003	A 970 993 46 01
146	SPRING SYNCHRONIZER BODY	003	A 970 993 64 01
149	PIN SYNCHRONIZER BODY	003	A 970 262 02 74
152	ROLLER ASSEMBLY Replaced by: A 002 981 63 12	-	A 002 981 59 12
152	ROLLER ASSEMBLY Replaced by: A 002 981 63 12	-	A 002 981 60 12
152	ROLLER ASSEMBLY TOOTHED GEAR, FIFTH AND SEXTH GEARS Replaced by: A 976 981 00 12	001	A 002 981 63 12
152	ROLLER ASSEMBLY TOOTHED GEAR, FIFTH AND SEXTH GEARS	001	A 976 981 00 12
155	SNAP RING GEAR; AS REQUIRED 1.79 MM	001	A 970 262 25 94
155	SNAP RING GEAR; AS REQUIRED 1.84 MM	001	A 970 262 11 94
155	SNAP RING GEAR; AS REQUIRED 1.89 MM	001	A 970 262 12 94
155	SNAP RING GEAR; AS REQUIRED 1.94 MM	001	A 970 262 13 94
155	SNAP RING GEAR; AS REQUIRED 2.00 MM	001	A 970 262 14 94
158	PULSE STAR SPEEDOMETER	001	A 970 262 01 28
161	SEAL RING MAIN SHAFT,REAR	001	A 024 997 04 47
161	SEAL RING MAIN SHAFT,REAR	001	A 020 997 72 47
161	SEAL RING MAIN SHAFT,REAR	001	A 020 997 91 47
161	SEAL RING MAIN SHAFT,REAR	001	A 024 997 27 47
161	SEAL RING MAIN SHAFT,REAR	001	A 024 997 32 47
164	FLANGE (COUPLING FLANGE) 153,9 MM	001	A 970 262 14 45
167	HEXAGON HEAD BOLT COUPLING FLANGE TO DRIVE SHAFT	001	N 910105 016005
170	THRUST WASHER COUPLING FLANGE TO DRIVE SHAFT	001	A 383 282 02 62
173	COUNTERSHAFT ONLY VALID IN LATIN AMERICA TO BE ORDERED ONLY FROM MBB Replaced by: A 970 263 07 02	001	A 694 263 00 02
173	COUNTERSHAFT NOT VALID IN LATIN AMERICA TO BE ORDERED ONLY FROM DB-AG	001	A 970 263 07 02
176	GEAR 3RD AND 4TH SPEED Z=38 / Z=33 ONLY VALID IN LATIN AMERICA	001	A 694 263 00 13
179	GEAR 5TH SPEED	001	A 694 263 00 15
185	GEAR CONSTANT; COUNTERSHAFT	001	A 694 263 00 10
191	INNER RING COUNTERSHAFT,REAR	001	A 970 981 00 81
194	ROLLER ASSEMBLY COUNTERSHAFT,REAR	001	A 002 981 75 12
194	CYLINDR. ROLLER BEARING COUNTERSHAFT,REAR	001	A 010 981 49 01
197	SNAP RING COUNTERSHAFT,REAR	001	N 912009 037100
200	REVERSE IDLER SHAFT Replaced by: A 970 263 02 30	-	A 694 263 00 30
200	REVERSE IDLER SHAFT	001	A 970 263 02 30
203	REVERSE IDLER GEAR Z=21 TO BE ORDERED ONLY FROM MBB	001	A 694 263 00 31
203	REVERSE IDLER GEAR Z=21	001	A 694 263 01 31
206	NEEDLE BEARING REVERSE IDLER GEAR	001	A 017 981 60 10
206	NEEDLE BEARING REVERSE IDLER GEAR	001	A 017 981 61 10
206	NEEDLE BEARING REVERSE IDLER GEAR	001	A 018 981 57 10
209	RETAINING RING REVERSE SLIDING GEAR	001	N 900055 032310

To find out where to buy the item or equivalent, click on the part number.

Region: EU | GB | USA