| №- | Name | A* | Part number |
|---|---|---|---|
| 002 | REAR AXLE Replaced by: A 309 350 43 00 |
- | A 309 350 27 00 |
| 002 | REAR AXLE Replaced by: A 309 350 56 00 |
- | A 309 350 43 00 |
| 002 | REAR AXLE WITH BRAKES;RATIO: 39:6 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 350 56 00 |
| 002 | REAR AXLE WITH BRAKES;RATIO: 45:7 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 350 54 00 |
| 003 | AXLE HOUSING Replaced by: A 309 350 09 20 |
- | A 309 350 05 20 |
| 003 | AXLE HOUSING WITH REAR AXLE TUBES |
001 | A 309 350 09 20 |
| 004 | CYLINDRICAL PIN AXLE HOUSING |
004 | N 000007 006205 |
| 007 | SCREW BEARING COVER TO AXLE HOUSING |
004 | N 000931 014024 |
| 009 | OIL COLLECTOR Replaced by: A 309 357 00 82 |
- | A 319 357 04 82 |
| 009 | OIL COLLECTOR REAR AXLE TUBE |
002 | A 309 357 00 82 |
| 011 | SPRING SADDLE REAR AXLE TUBE |
002 | A 309 325 02 12 |
| 012 | THRUST RING Replaced by: A 667 356 01 15 |
- | A 309 356 00 15 |
| 012 | THRUST RING LEFT AND RIGHT |
002 | A 667 356 01 15 |
| DIFFERENTIAL CASE 001179; 309.0 10/50 001126; 309.0 20/60 016458; 309.1 10/50 001126; 309.1 20/60 FROM IDENT NO. 002799-145736 ALSO INSTALLED ON EXCEPT FOR Replaced by: A 309 350 36 23 |
- | A 319 350 01 27 | |
| DIFFERENTIAL CASE 001179; 309.0 10/50 001126; 309.0 20/60 016458; 309.1 10/50 001126; 309.1 20/60 FROM IDENT NO. 002799-145736 ALSO INSTALLED ON EXCEPT FOR Replaced by: A 309 350 36 23 |
- | A 319 350 02 27 | |
| 020 | DIFFERENTIAL GEAR Replaced by: A 309 350 63 23 |
- | A 309 350 36 23 |
| 020 | DIFFERENTIAL GEAR LESS RING GEAR AND PINION |
001 | A 309 350 63 23 |
| 023 | SCREW Replaced by: N 304017 010047 |
- | N 000933 010202 |
| 023 | SCREW COVER TO DIFFERENTIAL CASE |
008 | N 304017 010047 |
| 025 | SIDE GEAR 001180; 309.0 10/50 309.0 FROM CHASSIS 001151-003902; 309.1 FROM CHASSIS 015697-064721 ALSO INSTALLED ON:015539,015594,015609 ALSO INSTALLED ON ALSO INSTALLED ON 140555,142078 001127; 309.0 20/60 016459; 309.1 10/50 001127; 309.1 20/60 309.1 FROM IDENTNO. 042866-145736 EXCEPT FOR ALSO INSTALLED ON |
002 | A 319 353 08 15 |
| 025 | SIDE GEAR NUMBER OF TEETH: "16" 184087; 309.030-035,051-059 UP TO CHASSIS 184086,EXCEPT FOR MODEL 050 UP TO CHASSIS 192297 192298; 309.050 182066; 309.1 |
002 | A 309 353 00 15 |
| 027 | REPAIR KIT DIFFERENTIAL GEAR 184087; 309.030-035,051-059 UP TO CHASSIS 184086,EXCEPT FOR MODEL 050 UP TO CHASSIS 192297 192298; 309.050 182066; 309.1 |
001 | A 309 586 00 35 |
| DIFFERENTIAL PINION Replaced by: A 309 350 00 40 |
- | A 309 353 00 14 | |
| 027 | REPAIR KIT Replaced by: A 309 350 00 40 |
- | A 309 586 01 35 |
| 027 | REPAIR KIT DIFFERENTIAL GEAR |
001 | A 309 350 00 40 |
| 028 | DIFFERENTIAL PINION NUMBER OF TEETH: 10 001180; 309.0 10/50 309.0 FROM CHASSIS 001151-003902; 309.1 FROM CHASSIS 015697-064721 ALSO INSTALLED ON:015539,015594,015609 ALSO INSTALLED ON ALSO INSTALLED ON 140555,142078 001127; 309.0 20/60 016459; 309.1 10/50 001127; 309.1 20/60 309.1 FROM IDENTNO. 042866-145736 EXCEPT FOR ALSO INSTALLED ON |
004 | A 319 353 05 14 |
| 029 | SPHERICAL WASHER 1.00 MM |
004 | A 319 353 06 24 |
| 031 | SPACER WASHER AS REQUIRED 1.50 MM 001179; 309.0 10/50 001126; 309.0 20/60 016458; 309.1 10/50 001126; 309.1 20/60 FROM IDENT NO. 002799-145736 ALSO INSTALLED ON EXCEPT FOR |
002 | A 319 353 43 52 |
| 031 | SPACER WASHER AS REQUIRED 1.70 MM 001179; 309.0 10/50 001126; 309.0 20/60 016458; 309.1 10/50 001126; 309.1 20/60 FROM IDENT NO. 002799-145736 ALSO INSTALLED ON EXCEPT FOR |
002 | A 319 353 45 52 |
| 031 | THRUST WASHER Replaced by: A 669 353 13 62 |
- | A 669 353 00 62 |
| 031 | THRUST WASHER AS REQUIRED 1.30 MM |
002 | A 669 353 13 62 |
| 031 | THRUST WASHER Replaced by: A 669 353 13 62 |
- | A 669 353 01 62 |
| 031 | THRUST WASHER AS REQUIRED 1.35 MM |
002 | A 669 353 13 62 |
| 031 | THRUST WASHER Replaced by: A 669 353 15 62 |
- | A 669 353 02 62 |
| 031 | THRUST WASHER AS REQUIRED 1.40 MM |
002 | A 669 353 15 62 |
| 031 | THRUST WASHER AS REQUIRED 1.45 MM |
002 | A 669 353 03 62 |
| 031 | THRUST WASHER Replaced by: A 669 353 17 62 |
- | A 669 353 04 62 |
| 031 | THRUST WASHER AS REQUIRED 1.50 MM |
002 | A 669 353 17 62 |
| 031 | THRUST WASHER Replaced by: A 669 353 19 62 |
- | A 669 353 06 62 |
| 031 | THRUST WASHER AS REQUIRED 1.60 MM |
002 | A 669 353 19 62 |
| 031 | THRUST WASHER AS REQUIRED 1.65 MM |
002 | A 669 353 07 62 |
| 031 | THRUST WASHER Replaced by: A 669 353 21 62 |
- | A 669 353 08 62 |
| 031 | THRUST WASHER AS REQUIRED 1.70 MM |
002 | A 669 353 21 62 |
| 031 | THRUST WASHER AS REQUIRED 1.75 MM |
002 | A 669 353 09 62 |
| 031 | THRUST WASHER Replaced by: A 669 353 23 62 |
- | A 669 353 10 62 |
| 031 | THRUST WASHER AS REQUIRED 1.80 MM |
002 | A 669 353 23 62 |
| 031 | THRUST WASHER AS REQUIRED 1.85 MM |
002 | A 669 353 11 62 |
| 035 | DIFFERENTIAL SPIDER Replaced by: A 309 353 00 20 |
- | A 319 353 00 20 |
| 035 | DIFFERENTIAL SPIDER | 001 | A 309 353 00 20 |
| RING GEAR AND PINION UP TO IDENT NO. 042865 ALSO INSTALLED ON ALSO INSTALLED ON 192298; 309.050 182066; 309.1 Replaced by: A 309 350 09 39 |
- | A 309 350 01 39 | |
| 040 | RING GEAR AND PINION Replaced by: A 309 350 15 39 |
- | A 309 350 09 39 |
| 040 | RING GEAR AND PINION RATIO: 39:6 |
001 | A 309 350 15 39 |
| 040 | RING GEAR AND PINION RATIO: 45:7 |
001 | A 309 350 18 39 |
| 042 | SCREW Replaced by: A 319 990 18 01 |
- | A 319 990 17 01 |
| 042 | SCREW Replaced by: A 670 990 05 01 |
- | A 319 990 19 01 |
| 042 | SCREW RING GEAR TO DIFFERENTIAL CASE |
012 | A 670 990 05 01 |
| 043 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR IN REAR AXLE HOUSING |
002 | A 001 981 89 05 |
| 043 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR IN REAR AXLE HOUSING |
002 | A 002 981 19 05 |
| 043 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR IN REAR AXLE HOUSING |
002 | A 002 981 22 05 |
| 043 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR IN REAR AXLE HOUSING |
002 | A 007 981 55 05 |
| 045 | SCREW COLLAR DIFFERENTIAL GEAR ADJUSTMENT |
002 | A 319 353 08 25 |
| 047 | LOCK Replaced by: A 669 353 00 73 |
- | A 319 353 02 73 |
| 047 | LOCK DIFFERENTIAL GEAR ADJUSTMENT |
002 | A 669 353 00 73 |
| 048 | SCREW DIFFERENTIAL GEAR ADJUSTMENT |
002 | N 000933 008005 |
| 049 | TOOTHED WASHER DIFFERENTIAL GEAR ADJUSTMENT |
002 | N 006797 008120 |
| 051 | COVER Replaced by: A 673 350 00 21 |
- | A 309 350 00 21 |
| 051 | COVER Replaced by: A 673 351 04 08 |
- | A 673 350 00 21 |
| 051 | COVER REAR AXLE HOUSING |
001 | A 673 351 04 08 |
| 053 | SCREW PLUG Replaced by: A 352 997 00 32 |
- | A 186 997 00 32 |
| 053 | SCREW PLUG OIL FILLING |
001 | A 352 997 00 32 |
| 055 | GASKET COVER TO DIFFERENTIAL CASE TO 309 350 00 21 |
001 | A 319 351 02 80 |
| 055 | GASKET COVER TO DIFFERENTIAL CASE TO 673 350 00 21 |
001 | A 673 351 00 80 |
| 056 | SCREW Replaced by: N 304017 010028 |
- | N 000933 010238 |
| 056 | SCREW COVER TO DIFFERENTIAL CASE M10X18,TO 309 350 00 21 |
010 | N 304017 010028 |
| 056 | SCREW COVER TO DIFFERENTIAL CASE M 10X20,TO 673 350 00 21 |
010 | N 914112 010016 |
| 057 | LOCK WASHER COVER TO DIFFERENTIAL CASE |
010 | N 912004 010102 |
| 057C | CLAMP LINE MOUNTING |
001 | A 312 995 10 20 |
| 058 | SCREW PLUG OIL DRAIN |
001 | A 352 997 00 32 |
| TAPERED ROLLER BEARING FROM CHASSIS 145737 ALSO INSTALLED ON EXCEPT FOR TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED Replaced by: A 002 981 85 05 |
- | A 319 981 07 05 | |
| TAPERED ROLLER BEARING FROM CHASSIS 145737 ALSO INSTALLED ON EXCEPT FOR TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED Replaced by: A 002 981 94 05 |
- | A 002 981 43 05 | |
| 061 | TAPERED ROLLER BEARING DRIVE PINION FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
002 | A 002 981 85 05 |
| 061 | TAPERED ROLLER BEARING DRIVE PINION FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
002 | A 002 981 94 05 |
| 061 | TAPERED ROLLER BEARING DRIVE PINION FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
002 | A 005 981 45 05 |
| 064 | SPACER RING AS REQUIRED 15.00 MM FROM CHASSIS 145737 ALSO INSTALLED ON EXCEPT FOR TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 319 353 07 51 |
| 064 | SPACER RING AS REQUIRED 15.60 MM FROM CHASSIS 145737 ALSO INSTALLED ON EXCEPT FOR TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 319 353 06 51 |
| 064 | SPACER RING AS REQUIRED 12.00 MM FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 353 02 51 |
| 064 | SPACER RING AS REQUIRED 12.60 MM FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 353 01 51 |
| 065 | SPACER RING AS REQUIRED 10.00 MM |
001 | A 319 353 05 51 |
| 068 | SCREW COLLAR DRIVE PINION |
001 | A 319 353 10 25 |
| 070 | SEAL RING Replaced by: A 012 997 30 47 |
- | A 000 997 51 46 |
| 070 | SEAL RING FLANGE TO DRIVE PINION |
001 | A 012 997 30 47 |
| 070 | SEAL RING FLANGE TO DRIVE PINION |
001 | A 011 997 73 47 |
| 072 | FLANGE EXHAUST STOCK OF OLD PARTS;309.0 UP TO CHASSIS 003902; 309.1 FROM CHASSIS 015697-064721 ALSO INSTALLED ON:015539,015594,015609 Replaced by: A 319 350 07 45 |
- | A 319 350 06 45 |
| 072 | FLANGE | 001 | A 319 350 07 45 |
| 073 | NUT Replaced by: A 601 351 00 72 |
- | A 319 353 01 26 |
| 073 | NUT FLANGE TO DRIVE PINION |
001 | A 601 351 00 72 |
| 078 | SPACER WASHER Replaced by: A 319 353 49 52 |
- | A 310 353 49 52 |
| 078 | SPACER WASHER AS REQUIRED 10.40 MM FROM CHASSIS 145737 ALSO INSTALLED ON EXCEPT FOR TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 319 353 49 52 |
| 078 | SPACER WASHER AS REQUIRED 10.50 MM FROM CHASSIS 145737 ALSO INSTALLED ON EXCEPT FOR TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 319 353 51 52 |
| 078 | SPACER WASHER AS REQUIRED 10.65 MM FROM CHASSIS 145737 ALSO INSTALLED ON EXCEPT FOR TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 319 353 54 52 |
| 078 | SPACER WASHER AS REQUIRED 10.95 MM FROM CHASSIS 145737 ALSO INSTALLED ON EXCEPT FOR TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 319 353 60 52 |
| 078 | SPACER RING AS REQUIRED 7.50 MM FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 353 09 51 |
| 078 | SPACER RING AS REQUIRED 7.55 MM FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 353 11 51 |
| 078 | SPACER RING AS REQUIRED 7.70 MM FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 353 19 51 |
| 078 | SPACER RING AS REQUIRED 7.75 MM FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 353 21 51 |
| 078 | SPACER RING AS REQUIRED 7.90 MM FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 353 29 51 |
| 078 | SPACER RING AS REQUIRED 7.95 MM FROM IDENT NO 042866 EXCEPT FOR SEE UNIT MICROFICHE,MODEL: 741.0 EXHAUST STOCK OF OLD PARTS;309.1 FROM CHASSIS 015699-064721 ALSO INSTALLED ON:015539,015594,015609 |
001 | A 309 353 31 51 |
| 084 | SPACER WASHER AS REQUIRED 0.10 MM |
001 | A 319 353 46 52 |
| 084 | SPACER WASHER AS REQUIRED 0.25 MM |
001 | A 319 353 47 52 |
| 084 | SPACER WASHER AS REQUIRED 0.30 MM |
001 | A 319 353 62 52 |
| 084 | SPACER WASHER AS REQUIRED 0.45 MM |
001 | A 319 353 63 52 |
| 084 | SPACER WASHER AS REQUIRED 0.50 MM |
001 | A 319 353 48 52 |
| 084 | SPACER WASHER AS REQUIRED 1.00 MM |
001 | A 319 353 65 52 |
| 089 | CYLINDR. ROLLER BEARING PINION,INSIDE |
001 | A 319 981 00 01 |
| 089 | CYLINDR. ROLLER BEARING PINION,INSIDE |
001 | A 003 981 21 01 |
| 089 | CYLINDR. ROLLER BEARING PINION,INSIDE |
001 | A 003 981 28 01 |
| 090 | LOCK RING PINION,INSIDE |
001 | N 000471 025002 |
| 091 | LOCK Replaced by: A 669 353 00 73 |
- | A 319 353 02 73 |
| 091 | LOCK DRIVE PINION |
001 | A 669 353 00 73 |
| 093 | TOOTHED WASHER DRIVE PINION |
001 | N 006797 008120 |
| 094 | SCREW Replaced by: N 304017 008039 |
- | N 000933 008130 |
| 094 | SCREW DRIVE PINION |
001 | N 304017 008039 |
| DRUM HUB Replaced by: A 309 356 04 02 |
- | A 309 350 10 47 | |
| 097 | DRUM HUB | 002 | A 309 356 04 02 |
| 099 | WHEEL MOUNTING BOLT Replaced by: A 309 402 02 71 |
- | A 319 402 04 71 |
| 099 | WHEEL MOUNTING BOLT WHEEL HUB |
012 | A 309 402 02 71 |
| 100 | STUD REAR AXLE SHAFT TO HUB |
012 | A 319 990 00 05 |
| 102 | OIL COLLECTOR WHEEL BEARING |
002 | A 319 356 02 82 |
| 103 | TAPERED ROLLER BEARING INSIDE 55 MM |
002 | A 001 981 84 05 |
| 103 | TAPERED ROLLER BEARING INSIDE 55 MM |
002 | A 001 981 86 05 |
| 103 | TAPERED ROLLER BEARING INSIDE 55 MM |
002 | A 002 981 24 05 |
| 103 | TAPERED ROLLER BEARING INSIDE 60.325 MM |
002 | A 000 980 41 02 |
| 103 | TAPERED ROLLER BEARING INSIDE 60.325 MM |
002 | A 000 980 44 02 |
| 103 | TAPERED ROLLER BEARING INSIDE 60.325 MM |
002 | A 000 980 45 02 |
| 103 | TAPERED ROLLER BEARING INSIDE 60.325 MM |
002 | A 002 981 62 05 |
| 106 | SPACER RING WHEEL BEARING |
002 | A 309 356 00 51 |
| 107 | SEAL RING Replaced by: A 019 997 58 47 |
- | A 000 997 14 46 |
| 107 | SEAL RING WHEEL BEARING |
002 | A 019 997 58 47 |
| 109 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 001 981 89 05 |
| 109 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 002 981 19 05 |
| 109 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 002 981 22 05 |
| 109 | TAPERED ROLLER BEARING OUTSIDE |
002 | A 007 981 55 05 |
| 113 | SPACER WASHER Replaced by: A 309 356 00 52 |
- | A 319 357 02 52 |
| 113 | SPACER WASHER WHEEL BEARING |
002 | A 309 356 00 52 |
| 114 | NUT WHEEL BEARING |
004 | A 319 990 00 60 |
| 115 | LOCK PLATE WHEEL BEARING |
002 | N 070952 050102 |
| 116 | REAR AXLE SHAFT Replaced by: A 309 357 04 01 |
- | A 309 357 01 01 |
| 116 | REAR AXLE SHAFT | 002 | A 309 357 04 01 |
| 117 | LOCK WASHER REAR AXLE SHAFT TO HUB |
012 | N 912004 010102 |
| 118 | NUT Replaced by: N 304032 010002 |
- | N 000934 010009 |
| 118 | NUT REAR AXLE SHAFT TO HUB |
012 | N 304032 010002 |
| 120 | VALVE Replaced by: A 383 351 00 65 |
- | A 312 350 10 90 |
| 120 | FITTING AXLE BREATHING |
001 | A 383 351 00 65 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy