| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | AUDIO/COMAND DISPLAY ADDITIONALLY ORDER: A 000 989 06 88 07 Replaced by: A 221 900 84 01 |
001 | A 221 906 55 00 |
| 010 | CONTROL UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 |
001 | A 221 900 84 01 |
| 010 | MONITOR CENTRAL DISPLAY ZPD OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 02 89 |
001 | A 221 820 62 89 |
| 010 | MONITOR CENTRAL DISPLAY ZPD OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 32 89 |
001 | A 221 870 02 89 |
| 010 | MONITOR CENTRAL DISPLAY OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH Replaced by: A 221 870 44 89 |
001 | A 221 870 32 89 |
| 010 | MONITOR CENTRAL DISPLAY OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 44 89 |
| 010 | MONITOR CENTRAL DISPLAY ADDITIONALLY ORDER: A 000 989 06 88 07 Replaced by: A 221 906 30 00 |
001 | A 221 870 20 89 |
| 010 | MONITOR CENTRAL DISPLAY ADDITIONALLY ORDER: A 000 989 06 88 07 Replaced by: A 221 900 35 01 |
001 | A 221 906 30 00 |
| 010 | CONTROL UNIT CENTRAL DISPLAY ADDITIONALLY ORDER: A 000 989 06 88 07 |
001 | A 221 900 35 01 |
| 010 | CONTROL UNIT CENTRAL DISPLAY WITH HEAT MAT Replaced by: A 221 900 35 04 |
001 | A 221 900 24 02 |
| 010 | CONTROL UNIT CENTRAL DISPLAY PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 35 04 |
| 010 | MONITOR CENTRAL DISPLAY ADDITIONALLY ORDER: A 000 989 06 88 07 WITH SEAT HEATER SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 44 89 |
| 010 | CONTROL UNIT CENTRAL DISPLAY DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION |
001 | A 221 900 98 03 |
| 030 | OPERATING UNIT COMAND HU PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 90 87 |
001 | A 221 870 77 85 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 33 91 |
001 | A 221 870 90 87 |
| 030 | CONTROL UNIT COMAND PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 870 33 91 |
| 030 | OPERATING UNIT COMAND HU OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 83 92 |
001 | A 221 870 54 86 |
| 030 | OPERATING UNIT COMAND OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 05 93 |
001 | A 221 870 83 92 |
| 030 | OPERATING UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 77 93 |
001 | A 221 870 05 93 |
| 030 | OPERATING UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 27 95 |
001 | A 221 870 77 93 |
| 030 | OPERATING UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 870 27 95 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 ALSO ORDER: WITH LHD A 216 540 85 08 / W/ RHD A 216 540 86 08 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 25 01 |
001 | A 221 900 70 00 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 ALSO ORDER: WITH LHD A 216 540 85 08 / W/ RHD A 216 540 86 08 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 87 01 |
001 | A 221 900 25 01 |
| 030 | CONTROL UNIT OPERATING UNIT HEADUNIT ECE DVD-LAUFWERK NAVI ADDITIONALLY ORDER: A 000 989 06 88 07 ALSO ORDER: WITH LHD A 216 540 85 08 / W/ RHD A 216 540 86 08 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 27 02 |
001 | A 221 900 87 01 |
| 030 | CONTROL UNIT OPERATING UNIT HEADUNIT ECE DVD-LAUFWERK NAVI ADDITIONALLY ORDER: A 000 989 06 88 07 ALSO ORDER: WITH LHD A 216 540 85 08 / W/ RHD A 216 540 86 08 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 76 02 |
001 | A 221 900 27 02 |
| 030 | CONTROL UNIT OPERATING UNIT HEADUNIT ECE DVD-LAUFWERK NAVI ADDITIONALLY ORDER: A 000 989 06 88 07 WITH HEAT MAT ALSO ORDER: WITH LHD A 216 540 85 08 / W/ RHD A 216 540 86 08 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 62 03 |
001 | A 221 900 76 02 |
| 030 | CONTROL UNIT OPERATING UNIT HEADUNIT ECE DVD-LAUFWERK NAVI ADDITIONALLY ORDER: A 000 989 06 88 07 WITH HEAT MAT Replaced by: A 221 900 88 03 |
001 | A 221 900 62 03 |
| 030 | CONTROL UNIT OPERATING UNIT HEADUNIT ECE DVD-LAUFWERK NAVI ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 900 88 03 |
| 030 | CONTROL UNIT OPERATING UNIT HEADUNIT ECE DVD-LAUFWERK NAVI PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 900 46 04 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU JAPAN NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 89 86 |
| 030 | CONTROL UNIT HEADUNIT COMAND JAPAN NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 65 87 |
001 | A 221 870 75 85 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 07 92 |
001 | A 221 870 65 87 |
| 030 | CONTROL UNIT HEADUNIT COMAND Replaced by: A 221 870 08 92 |
001 | A 221 870 07 92 |
| 030 | CONTROL UNIT HEADUNIT COMAND Replaced by: A 221 870 32 93 |
001 | A 221 870 08 92 |
| 030 | CONTROL UNIT HEADUNIT COMAND |
001 | A 221 870 32 93 |
| 030 | CONTROL UNIT COMAND |
001 | A 221 900 38 00 |
| 030 | CONTROL UNIT COMAND OPERATING MODULE DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 93 03 |
001 | A 221 900 32 02 |
| 030 | CONTROL UNIT COMAND OPERATING MODULE DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 50 04 |
001 | A 221 900 93 03 |
| 030 | CONTROL UNIT COMAND OPERATING MODULE DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 50 04 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 94 87 |
001 | A 221 870 00 87 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 94 87 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 55 86 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 95 87 |
001 | A 221 870 01 87 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 38 91 |
001 | A 221 870 95 87 |
| 030 | CONTROL UNIT COMAND OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH THEFT-RELEVANT PART PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 82 86 |
001 | A 221 870 38 91 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 84 92 |
001 | A 221 870 82 86 |
| 030 | CONTROL UNIT HEADUNIT COMAND OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH Replaced by: A 221 870 07 93 |
001 | A 221 870 84 92 |
| 030 | CONTROL UNIT HEADUNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH Replaced by: A 221 870 78 93 |
001 | A 221 870 07 93 |
| 030 | CONTROL UNIT HEADUNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH Replaced by: A 221 870 28 95 |
001 | A 221 870 78 93 |
| 030 | CONTROL UNIT HEADUNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH Replaced by: A 221 870 59 95 |
001 | A 221 870 28 95 |
| 030 | OPERATING UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH |
001 | A 221 870 59 95 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 27 01 |
001 | A 221 900 72 00 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 89 01 |
001 | A 221 900 27 01 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 29 02 |
001 | A 221 900 89 01 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 78 02 |
001 | A 221 900 29 02 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 64 03 |
001 | A 221 900 78 02 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 90 03 |
001 | A 221 900 64 03 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 48 04 |
001 | A 221 900 90 03 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 48 04 |
| 030 | OPERATING UNIT COMAND HU PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 91 87 |
001 | A 221 870 81 85 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 34 91 |
001 | A 221 870 91 87 |
| 030 | OPERATING UNIT COMAND NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 870 34 91 |
| 030 | OPERATING UNIT COMAND HU WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 85 92 |
001 | A 221 870 84 86 |
| 030 | OPERATING UNIT WITH HEAT MAT NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 04 93 |
001 | A 221 870 85 92 |
| 030 | OPERATING UNIT WITH HEAT MAT NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 79 93 |
001 | A 221 870 04 93 |
| 030 | OPERATING UNIT WITH HEAT MAT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 29 95 |
001 | A 221 870 79 93 |
| 030 | OPERATING UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 870 29 95 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 24 01 |
001 | A 221 900 69 00 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 86 01 |
001 | A 221 900 24 01 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 26 02 |
001 | A 221 900 86 01 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 75 02 |
001 | A 221 900 26 02 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 61 03 |
001 | A 221 900 75 02 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 87 03 |
001 | A 221 900 61 03 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 45 04 |
001 | A 221 900 87 03 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 900 45 04 |
| 030 | OPERATING UNIT COMAND HU PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 92 87 |
001 | A 221 870 82 85 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 35 91 |
001 | A 221 870 92 87 |
| 030 | CONTROL UNIT COMAND PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 870 35 91 |
| 030 | OPERATING UNIT COMAND HU OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 86 92 |
001 | A 221 870 87 86 |
| 030 | OPERATING UNIT COMAND OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 06 93 |
001 | A 221 870 86 92 |
| 030 | OPERATING UNIT COMAND COMAND PLUS ECE M.NAVI OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 80 93 |
001 | A 221 870 06 93 |
| 030 | CONTROL UNIT HEADUNIT COMAND COMAND PLUS ECE M.NAVI OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 30 95 |
001 | A 221 870 80 93 |
| 030 | OPERATING UNIT COMAND PLUS ECE M.NAVI OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 870 30 95 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 26 01 |
001 | A 221 900 71 00 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 88 01 |
001 | A 221 900 26 01 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 28 02 |
001 | A 221 900 88 01 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 77 02 |
001 | A 221 900 28 02 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 63 03 |
001 | A 221 900 77 02 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 Replaced by: A 221 900 89 03 |
001 | A 221 900 63 03 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 47 04 |
001 | A 221 900 89 03 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 900 47 04 |
| 030 | OPERATING UNIT COMAND HU OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 93 87 |
001 | A 221 870 83 85 |
| 030 | CONTROL UNIT HEADUNIT COMAND HU OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 36 91 |
001 | A 221 870 93 87 |
| 030 | CONTROL UNIT COMAND OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 03 93 |
001 | A 221 870 36 91 |
| 030 | OPERATING UNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 81 93 |
001 | A 221 870 03 93 |
| 030 | CONTROL UNIT HEADUNIT OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 31 95 |
001 | A 221 870 81 93 |
| 030 | OPERATING UNIT COMAND OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 870 31 95 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 23 01 |
001 | A 221 900 68 00 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 85 01 |
001 | A 221 900 23 01 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 25 02 |
001 | A 221 900 85 01 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 WITH HEAT MAT NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 74 02 |
001 | A 221 900 25 02 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 WITH HEAT MAT ALSO ORDER: WITH LHD A 216 540 85 08 / W/ RHD A 216 540 86 08 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 60 03 |
001 | A 221 900 74 02 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 82 03 |
001 | A 221 900 60 03 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 44 04 |
001 | A 221 900 82 03 |
| 030 | CONTROL UNIT OPERATING UNIT ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 900 44 04 |
| 030 | CONTROL UNIT COMAND PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 36 91 |
| 030 | CONTROL UNIT HEADUNIT COMAND COMAND M.NAVI,SINGLE DVD, KOREA PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 18 92 |
001 | A 221 870 16 92 |
| 030 | CONTROL UNIT WITH HEAT MAT Replaced by: A 221 900 29 01 |
001 | A 221 900 74 00 |
| 030 | CONTROL UNIT | 001 | A 221 900 29 01 |
| 030 | CONTROL UNIT OPERATING UNIT Replaced by: A 221 900 31 02 |
001 | A 221 900 91 01 |
| 030 | CONTROL UNIT OPERATING UNIT Replaced by: A 221 900 80 02 |
001 | A 221 900 31 02 |
| 030 | CONTROL UNIT OPERATING UNIT |
001 | A 221 900 80 02 |
| 030 | CONTROL UNIT OPERATING UNIT DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION Replaced by: A 221 900 92 03 |
001 | A 221 900 66 03 |
| 030 | CONTROL UNIT OPERATING UNIT DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 92 03 |
| 030 | CONTROL UNIT HEADUNIT COMAND COMAND M.NAVI DVD CHANGER, KOREA PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 18 92 |
| 030 | OPERATING UNIT COMAND COMAND PLUS KOREA |
001 | A 221 870 40 95 |
| 030 | CONTROL UNIT OPERATING UNIT WITH HEAT MAT Replaced by: A 221 900 28 01 |
001 | A 221 900 73 00 |
| 030 | CONTROL UNIT OPERATING UNIT WITH HEAT MAT Replaced by: A 221 900 43 01 |
001 | A 221 900 28 01 |
| 030 | CONTROL UNIT OPERATING UNIT WITH HEAT MAT Replaced by: A 221 900 90 01 |
001 | A 221 900 43 01 |
| 030 | CONTROL UNIT OPERATING UNIT Replaced by: A 221 900 30 02 |
001 | A 221 900 90 01 |
| 030 | CONTROL UNIT OPERATING UNIT Replaced by: A 221 900 79 02 |
001 | A 221 900 30 02 |
| 030 | CONTROL UNIT OPERATING UNIT |
001 | A 221 900 79 02 |
| 030 | CONTROL UNIT OPERATING UNIT DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION Replaced by: A 221 900 16 04 |
001 | A 221 900 65 03 |
| 030 | CONTROL UNIT OPERATING UNIT DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 52 04 |
001 | A 221 900 16 04 |
| 030 | CONTROL UNIT OPERATING UNIT DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 52 04 |
| 030 | CONTROL UNIT HEADUNIT COMAND PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 41 95 |
001 | A 221 870 59 92 |
| 030 | OPERATING UNIT COMAND |
001 | A 221 870 41 95 |
| 050 | RECEIVER DVBT IN LUGGAGE COMPARTMENT,LEFT TV FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 820 72 89 |
| 050 | TV TUNER IN LUGGAGE COMPARTMENT,LEFT TV NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 820 88 89 |
001 | A 221 820 86 89 |
| 050 | TV TUNER IN LUGGAGE COMPARTMENT,LEFT TV PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 19 89 |
001 | A 221 820 88 89 |
| 050 | TV TUNER IN LUGGAGE COMPARTMENT,LEFT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 08 89 |
001 | A 221 870 19 89 |
| 050 | RECEIVER IN LUGGAGE COMPARTMENT,LEFT DVB Replaced by: A 221 870 29 89 |
001 | A 221 870 08 89 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT DVB NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 42 89 |
001 | A 221 870 29 89 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 60 89 |
001 | A 221 870 42 89 |
| 050 | COMBI TV-RECEIVER IN LUGGAGE COMPARTMENT,LEFT NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 48 01 |
001 | A 221 870 60 89 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT STG VST TV TUNER |
001 | A 221 900 48 01 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT STG VST TV TUNER PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 85 02 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT STG VST TV TUNER PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 26 04 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT |
001 | A 221 900 61 02 |
| 050 | TV RECEIVER DTMB IN LUGGAGE COMPARTMENT,LEFT TV EMPFAENGER CHINA ADDITIONALLY ORDER: A 000 989 06 88 07 Replaced by: A 221 900 84 00 |
001 | A 221 870 58 89 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT TV EMPFAENGER CHINA ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 84 00 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT TV EMPFAENGER CHINA WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 24 04 |
001 | A 221 900 52 02 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT TV EMPFAENGER CHINA PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 68 04 |
001 | A 221 900 24 04 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT TV EMPFAENGER CHINA PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 68 04 |
| 050 | CONTROL UNIT IN LUGGAGE COMPARTMENT,LEFT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 212 900 92 22 |
| 100 | MICROPHONE IN MIRROR BASE COVERING OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH |
001 | A 220 820 03 35 |
| 100 | MICROPHONE IN MIRROR BASE COVERING DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION |
001 | A 220 820 03 35 |
| 110 | SWITCH BLOCK CONTROLLER PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 03 51 |
| 110 | SWITCH BLOCK CONTROLLER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 61 51 |
| 110 | SWITCH BLOCK CONTROLLER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. WITH HEAT MAT ATTENTION: ORDER WASHER AS WELL PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 52 58 |
001 | A 221 870 74 58 |
| 110 | SWITCH CONTROLLER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 52 58 |
| 110 | SWITCH BLOCK CONTROLLER THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 62 51 |
001 | A 221 870 04 51 |
| 110 | SWITCH BLOCK CONTROLLER THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 62 51 |
| 110 | SWITCH BLOCK CONTROLLER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 53 58 |
001 | A 221 870 75 58 |
| 110 | SWITCH CONTROLLER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 53 58 |
| 110 | SWITCH BLOCK CONTROLLER THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 63 51 |
001 | A 221 870 05 51 |
| 110 | SWITCH BLOCK CONTROLLER THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 63 51 |
| 110 | SWITCH BLOCK CONTROLLER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 54 58 |
001 | A 221 870 76 58 |
| 110 | SWITCH CONTROLLER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 54 58 |
| 110 | SWITCH CONTROLLER ADDITIONALLY ORDER: A 000 989 06 88 07 WITH SEAT HEATER SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 69 58 |
| 110 | SWITCH CONTROLLER ADDITIONALLY ORDER: A 000 989 06 88 07 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 70 58 |
| 110 | SWITCH BLOCK CONTROLLER DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION TO BE ADAPTED DURING ASSEMBLY |
001 | A 221 905 45 00 |
| 110 | SWITCH BLOCK CONTROLLER DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 905 46 00 |
| 115 | HEXALOBULAR BOLT SWITCH BLOCK TO ARMREST |
004 | N 000000 001687 |
| 120 | ROTARY KNOB KNOB ON SWITCH BLOCK |
001 | A 221 827 00 25 |
| 130 | HEXALOBULAR BOLT KNOB ON SWITCH BLOCK M3X6 |
001 | N 000000 001496 |
| 140 | CAP SWITCH BLOCK TO ARMREST |
001 | A 221 822 01 35 |
| 250 | DVD-ROM Replaced by: A 221 827 25 59 |
001 | A 221 827 17 59 |
| 250 | DVD-ROM WITH HEAT MAT Replaced by: A 221 827 47 59 |
001 | A 221 827 25 59 |
| 250 | DVD-ROM Replaced by: A 221 827 59 59 |
001 | A 221 827 47 59 |
| 250 | DVD-ROM Replaced by: A 221 827 81 59 |
001 | A 221 827 59 59 |
| 250 | DVD-ROM FOR NORTH AFRICA Replaced by: A 221 827 24 59 |
001 | A 221 827 13 59 |
| 250 | DVD-ROM FOR NORTH AFRICA AFRICA WITH HEAT MAT Replaced by: A 221 827 48 59 |
001 | A 221 827 24 59 |
| 250 | DVD-ROM FOR NORTH AFRICA |
001 | A 221 827 48 59 |
| 250 | DVD-ROM FOR NORTH AFRICA NO LONGER AVAILABLE |
001 | A 221 827 58 59 |
| 250 | DVD-ROM FOR MALAYSIA/SINGAPORE/THAILAND WITH HEAT MAT Replaced by: A 221 827 23 59 |
001 | A 221 827 16 59 |
| 250 | DVD-ROM FOR MALAYSIA/SINGAPORE/THAILAND WITH HEAT MAT Replaced by: A 221 827 49 59 |
001 | A 221 827 23 59 |
| 250 | DVD-ROM FOR MALAYSIA/SINGAPORE/THAILAND Replaced by: A 221 827 57 59 |
001 | A 221 827 49 59 |
| 250 | DVD ROM FOR MALAYSIA/SINGAPORE/THAILAND |
001 | A 221 827 57 59 |
| 250 | DVD-ROM FOR HONG KONG |
001 | A 221 827 22 59 |
| 250 | DVD-ROM BAHRAIN/QUATAR/YEMEN/KUWAIT/OMAN/ SAUDI ARABIA/ABU DAHBI/DUBAI |
001 | A 221 827 14 59 |
| 250 | DVD ROM COMAND DVD APS WITH NAVIGATION NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. |
001 | A 221 827 00 59 |
| 250 | DVD-ROM NTG3 |
001 | A 221 827 54 59 |
| 250 | DVD-ROM | 001 | A 221 827 81 59 |
| 250 | DVD ROM COMAND DVD APS USA WITH NAVIGATION NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. |
001 | A 221 827 01 59 |
| 250 | DVD ROM COMAND DVD APS USA WITH NAVIGATION NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. |
001 | A 221 827 08 59 |
| 250 | DVD-ROM NAVI DVD USA NTG3 V 3.0 |
001 | A 221 827 30 59 |
| 250 | DVD-ROM NAVI USA COMAND NTG3 V7.0 |
001 | A 221 827 55 59 |
| 250 | DVD-ROM CHINA NAVI COMAND CHINA NTG3 V3.0 |
001 | A 221 827 71 59 |
| 250 | DVD-ROM KOREA NAVI COMAND KOREA NTG3 V3.0 |
001 | A 221 827 72 59 |
| 250 | DVD ROM NAVIGATION CONTROL UNIT MUST BE FLASHED AND CODED AFTER INSTALLATION Replaced by: A 221 827 36 59 |
001 | A 221 827 11 59 |
| 250 | DVD-ROM NAVIGATION WITH HEAT MAT CONTROL UNIT MUST BE FLASHED AND CODED AFTER INSTALLATION Replaced by: A 221 827 50 59 |
001 | A 221 827 36 59 |
| 250 | DVD-ROM NAVIGATION |
001 | A 221 827 50 59 |
| 250 | DVD-ROM CHINA Replaced by: A 221 827 10 59 |
001 | A 221 827 42 59 |
| 250 | DVD-ROM CHINA Replaced by: A 221 827 52 59 |
001 | A 221 827 10 59 |
| 250 | DVD-ROM CHINA Replaced by: A 221 827 71 59 |
001 | A 221 827 52 59 |
| 250 | DVD-ROM KOREA Replaced by: A 221 827 51 59 |
001 | A 221 827 43 59 |
| 250 | DVD-ROM KOREA Replaced by: A 221 827 53 59 |
001 | A 221 827 51 59 |
| 250 | DVD-ROM KOREA Replaced by: A 221 827 72 59 |
001 | A 221 827 53 59 |
| 250 | DVD-ROM NTG3.5 |
001 | A 216 827 30 59 |
| 250 | DVD-ROM NTG3.5 |
001 | A 216 827 46 59 |
| 250 | DVD-ROM NTG3.5 |
001 | A 216 827 67 59 |
| 250 | DVD ROM NAVI NTG 3.5 AFEICA V 1.0 ADDITIONALLY ORDER: A 000 989 06 88 07 |
001 | A 216 827 04 59 |
| 250 | DVD-ROM NAVI NTG 3.5 AFEICA V 1.0 Replaced by: A 216 827 22 59 |
001 | A 216 827 19 59 |
| 250 | DVD-ROM NAVI NTG 3.5 AFEICA V 1.0 |
001 | A 216 827 22 59 |
| 250 | DVD ROM NAVI NTG 3.5 ASIA V 1.0 Replaced by: A 216 827 20 59 |
001 | A 216 827 03 59 |
| 250 | DVD-ROM NAVI NTG 3.5 ASIA V 1.0 WITH HEAT MAT Replaced by: A 216 827 31 59 |
001 | A 216 827 20 59 |
| 250 | DVD-ROM NAVI NTG 3.5 ASIA V 1.0 |
001 | A 216 827 31 59 |
| 250 | DVD-ROM NAVI NTG 3.5 ASIA V 1.0 |
001 | A 216 827 45 59 |
| 250 | DVD-ROM NAVI NTG 3.5 ASIA V 1.0 |
001 | A 216 827 66 59 |
| 250 | DVD ROM NAVI NTG 3.5 CHINA V1.0 WITH HEAT MAT Replaced by: A 216 827 27 59 |
001 | A 216 827 07 59 |
| 250 | DVD-ROM NAVI NTG 3.5 CHINA V1.0 |
001 | A 216 827 27 59 |
| 250 | DVD ROM NAVI NTG 3.5 KOREA V 1.0 ADDITIONALLY ORDER: A 000 989 06 88 07 |
001 | A 216 827 09 59 |
| 250 | DVD-ROM ADDITIONALLY ORDER: A 000 989 06 88 07 Replaced by: A 216 827 44 59 |
001 | A 216 827 28 59 |
| 250 | DVD-ROM ADDITIONALLY ORDER: A 000 989 06 88 07 |
001 | A 216 827 44 59 |
| 250 | DVD ROM NAVI NTG 3.5 TAIWAN V1.0 ADDITIONALLY ORDER: A 000 989 06 88 07 Replaced by: A 216 827 32 59 |
001 | A 216 827 08 59 |
| 250 | DVD-ROM NAVI NTG 3.5 TAIWAN V1.0 ADDITIONALLY ORDER: A 000 989 06 88 07 |
001 | A 216 827 32 59 |
| 250 | DVD-ROM |
001 | A 216 827 23 59 |
| 250 | DVD-ROM NO LONGER AVAILABLE |
001 | A 216 827 33 59 |
| 250 | DVD-ROM |
001 | A 216 827 51 59 |
| 250 | DVD-ROM |
001 | A 216 827 68 59 |
| 250 | DVD ROM NAVI NTG 3.5 USA V 1.0 |
001 | A 216 827 02 59 |
| 250 | DVD-ROM NTG 3 Replaced by: A 221 827 69 59 |
001 | A 221 827 55 59 |
| 250 | DVD-ROM NTG 3 Replaced by: A 221 827 93 59 |
001 | A 221 827 69 59 |
| 250 | DVD-ROM NTG 3 Replaced by: A 221 827 94 59 |
001 | A 221 827 93 59 |
| 250 | DVD-ROM NTG 3 Replaced by: A 221 827 12 65 |
001 | A 221 827 94 59 |
| 250 | DVD-ROM NTG 3 |
001 | A 221 827 12 65 |
| 250 | DVD-ROM NTG 3 Replaced by: A 221 827 03 65 |
001 | A 221 827 68 59 |
| 250 | DVD-ROM NTG 3 Replaced by: A 221 827 11 65 |
001 | A 221 827 03 65 |
| 250 | DVD-ROM NTG 3 |
001 | A 221 827 11 65 |
| 250 | DVD-ROM NTG 3 NO LONGER AVAILABLE |
001 | A 221 827 60 59 |
| 250 | DVD-ROM NTG 3.5 Replaced by: A 216 827 35 59 |
001 | A 216 827 12 59 |
| 250 | DVD-ROM NTG 3.5 NO LONGER AVAILABLE Replaced by: A 216 827 36 59 |
001 | A 216 827 35 59 |
| 250 | DVD-ROM NTG 3.5 NO LONGER AVAILABLE Replaced by: A 216 827 38 59 |
001 | A 216 827 36 59 |
| 250 | DVD-ROM NTG 3.5 Replaced by: A 216 827 47 59 |
001 | A 216 827 38 59 |
| 250 | DVD-ROM NTG 3.5 Replaced by: A 216 827 53 59 |
001 | A 216 827 47 59 |
| 250 | DVD-ROM NTG 3.5 Replaced by: A 216 827 61 59 |
001 | A 216 827 53 59 |
| 250 | DVD-ROM NTG 3.5 |
001 | A 216 827 61 59 |
| 250 | DVD-ROM NTG 3.5 Replaced by: A 216 827 37 59 |
001 | A 216 827 18 59 |
| 250 | DVD-ROM NTG 3.5 Replaced by: A 216 827 48 59 |
001 | A 216 827 37 59 |
| 250 | DVD-ROM NTG 3.5 Replaced by: A 216 827 55 59 |
001 | A 216 827 48 59 |
| 250 | DVD-ROM NTG 3.5 |
001 | A 216 827 55 59 |
| 250 | DVD-ROM Replaced by: A 216 827 49 59 |
001 | A 216 827 40 59 |
| 250 | DVD-ROM Replaced by: A 216 827 57 59 |
001 | A 216 827 49 59 |
| 250 | DVD-ROM | 001 | A 216 827 57 59 |
| 250 | DVD-ROM Replaced by: A 216 827 73 59 |
001 | A 216 827 43 59 |
| 250 | DVD-ROM | 001 | A 216 827 73 59 |
| 900 | PIN BUSHING HOUSING CENTRAL DISPLAY 8-PIN MQS;A40/8 |
001 | A 002 540 75 81 |
| 900 | CLUTCH CENTRAL DISPLAY 12-PIN MQS |
001 | A 026 545 62 26 |
| 901 | FEMALE CONTACT CENTRAL DISPLAY 0.25-0.5 MM2 MQS;A40/8 |
NB | A 016 545 41 26 |
| 901 | FEMALE CONTACT CENTRAL DISPLAY 0.75 MM2 MQS |
NB | A 008 545 55 26 |
| 902 | SOCKET HOUSING COMAND 6-PIN MQS;A40/3 |
001 | A 038 545 72 28 |
| 902 | FEMALE CONNECTOR, ELETR. COMAND 6-PIN MQS;A40/3 |
001 | A 038 545 71 28 |
| 903 | FEMALE CONTACT COMAND 0.25-0.5 MM2 MQS;A40/3 |
NB | A 016 545 41 26 |
| 905 | CONTACT CARRIER TV-TUNER IN TRUNK 12-PIN MQS;A90/1 |
001 | A 002 545 85 40 |
| 905 | HOUSING TV-TUNER IN TRUNK 14-PIN MQS;A90/1 |
001 | A 000 545 87 30 |
| 906 | FEMALE CONTACT TV-TUNER IN TRUNK 0.25-0.5 MM2 MQS;A90/1 |
NB | A 016 545 41 26 |
| 906 | ELECTRICAL CABLE TV-TUNER IN TRUNK 0.75 MM2 MQS;A90/1 |
NB | A 000 540 46 05 |
| 910 | PIN BUSHING HOUSING TV-TUNER IN TRUNK 12-PIN MQS;A90/1 |
001 | A 001 545 47 40 |
| 910 | COVER CAP TV-TUNER IN TRUNK A90/1 |
001 | A 000 545 39 30 |
| 910 | COVER TV-TUNER IN TRUNK MQS;TO A 000 545 39 30 |
001 | A 000 545 91 03 |
| 911 | FEMALE CONTACT TV-TUNER IN TRUNK 0.25-0.5 MM2 MQS;A90/1 |
NB | A 016 545 41 26 |
| 915 | PIN BUSHING HOUSING SOUND AMPLIFIER MICROPHONE 2-PIN MQS;B25/6 |
001 | A 035 545 89 28 |
| 916 | PLUG PIN SOUND AMPLIFIER MICROPHONE 0.75 MM2 MQS;B25/6 |
NB | A 032 545 39 28 |
| 920 | FEM. CONNECTOR HOUS., EL. COMAND 40-PIN MQS;A40/3 |
001 | A 168 545 09 28 |
| 921 | FEMALE CONTACT COMAND 0.25-0.5 MM2 MQS;A40/3 |
NB | A 016 545 41 26 |
| 922 | PIN BUSHING HOUSING COMAND CONTROL PANEL 2-PIN MOST;A40/3 |
001 | A 002 545 90 40 |
| 922 | PIN BUSHING HOUSING COMAND CONTROL PANEL 2-PIN MOST;A40/3 |
001 | A 002 545 90 40 |
| 925 | PIN BUSHING HOUSING COMAND 20-PIN;A40/3 |
001 | A 002 545 86 40 |
| 925 | HOUSING COMAND 22-PIN MQS;A40/3 |
001 | A 000 545 90 30 |
| 925 | CLUTCH COMAND 2-PIN;A40/3 DESIGNO VERSION MUST BE PAINTED PRIOR TO INSTALLATION |
001 | A 022 545 74 26 |
| 926 | FEMALE CONTACT COMAND 0.25-0.5 MM2 MQS;A40/3 |
NB | A 016 545 41 26 |
| 926 | FEMALE CONTACT COMAND P717;A40/3 |
NB | A 020 545 10 26 |
| 927 | PIN BUSHING HOUSING TELEVISION TUNER 2-PIN MOST;A90/1 |
001 | A 002 545 90 40 |
| 930 | PIN BUSHING HOUSING CONTROLLER 8-PIN MQS;A40/9 |
001 | A 002 540 75 81 |
| 931 | FEMALE CONTACT CONTROLLER 0.25-0.5 MM2 MQS;A40/9 |
NB | A 016 545 41 26 |
| 931 | ELECTRICAL CABLE CONTROLLER 0.75 MM2 MQS;A40/9 CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
NB | A 000 540 46 05 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy