| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | STEERING GEAR OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# IONAL KEY " OR " PROGRAM AND TEACH IN REPLACEMENT KEY". PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 246 460 22 01 |
| 010 | STEERING GEAR WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 246 460 38 01 |
001 | A 246 460 02 01 |
| 010 | STEERING GEAR COMPLETE WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 246 460 50 01 |
001 | A 246 460 38 01 |
| 010 | STEERING GEAR COMPLETE WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 246 460 50 01 |
| 010 | STEERING GEAR COMPLETE WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 246 460 48 01 |
| 010 | STEERING GEAR COMPLETE OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# IONAL KEY " OR " PROGRAM AND TEACH IN REPLACEMENT KEY". PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 246 460 20 01 |
| 010 | STEERING GEAR COMPLETE WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 246 460 36 01 |
001 | A 246 460 01 01 |
| 010 | STEERING GEAR COMPLETE WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. WHEN ORDERING, ENSURE FORM IS COMPLETED FULLY AND KEPT ON FILE."SPARE-KEY/LOCKING LUG PART ORDERS". IN THE EVENT OF CRIMINAL INVESTIGATION DOCUMENTARY EVIDENCE MUST BE FURNISHED AT ANY GIVEN TIME. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 246 460 48 01 |
001 | A 246 460 36 01 |
| 020 | BELLOW LEFT AND RIGHT |
002 | A 246 463 00 96 |
| 030 | SPRING HOSE CLAMP OUTSIDE, LEFT AND RIGHT |
002 | A 000 995 95 05 |
| 040 | SINGLE-EYE CLAMP INSIDE, LEFT AND RIGHT |
002 | A 001 995 15 35 |
| 050 | PLUG STEERING GEAR |
001 | A 003 998 01 50 |
| 060 | TIE ROD OUTSIDE LEFT |
001 | A 246 330 17 00 |
| 060 | TIE ROD OUTSIDE RIGHT |
001 | A 246 330 18 00 |
| 080 | HEXAGON NUT TIE ROD TO STEERING ARM M14X1.5 |
002 | N 308673 014001 |
| 090 | TIE ROD INSIDE |
002 | A 246 338 00 00 |
| 100 | CUP SEAL TIE ROD |
001 | A 246 462 00 96 |
| 110 | HEAT SHIELD TUNNEL, TOP |
001 | A 246 466 08 38 |
| 120 | SCREW W RND. HEXAL. HEAD ATTACHMENT SHIELD |
004 | A 002 990 42 03 |
| 140 | BOLT W FLANGE STEERING TO FRAME-TYPE INTEGRAL SUPPORT M10X115 |
003 | A 019 990 46 01 |
| 150 | NUT STEERING TO FRAME-TYPE INTEGRAL SUPPORT M10 |
003 | N 913023 010002 |
| 200 | TS CONTROL UNIT STEERING GEAR OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# IONAL KEY " OR " PROGRAM AND TEACH IN REPLACEMENT KEY". PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 246 900 62 13 |
001 | A 246 900 89 12 |
| 200 | TS CONTROL UNIT STEERING GEAR OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# IONAL KEY " OR " PROGRAM AND TEACH IN REPLACEMENT KEY". PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 246 900 62 13 |
| 200 | TS CONTROL UNIT STEERING GEAR WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 246 900 76 15 |
001 | A 246 900 77 12 |
| 200 | TS CONTROL UNIT STEERING GEAR WITH DAS4, MAKE SURE TO PERFORM THE FOLLOWING COMMAND WITH XENTRY DIAGNOSTICS PRIOR TO ORDERING: "REGISTER VEHICLE FOR ORDERIN G A PROGRAMMED KEY" FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 246 900 76 15 |
| 200 | TS CONTROL UNIT STEERING GEAR FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 246 900 56 16 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy