| №- | Benennung | M* | Teilenummer |
|---|---|---|---|
| 015 | LENKSTOCKHEBEL UP TO IDENT NO. 941505 EXCEPT FOR 899081-941503 ONLY WITH OM601/OM602 ENGINE P 251434 ONLY USED OM602 P 251573 ONLY USED WITH AUTOMATIC TRANSMISSION Ersetzt durch: A 601 463 05 01 |
- | A 601 463 03 01 |
| 015 | LENKSTOCKHEBEL FROM IDENT NO.941506, P 000001 ALSO INSTALLED ON 601.361,362,366,367,371,372,376,377: FROM IDENT NO. 240114-499999 ALSO INSTALLED ON 234163 601.371,372,376,377: 556500 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 601 463 05 01 |
| 022 | MUTTER LENKSTOCKHEBEL AN LENKUNG |
001 | A 001 990 76 51 |
| 030 | MANSCHETTE Ersetzt durch: A 611 462 00 96 |
- | A 601 462 00 96 |
| 030 | MANSCHETTE ABDECKUNG KREUZGELENK |
001 | A 611 462 00 96 |
| 033 | BINDER | 001 | A 001 997 84 90 |
| 042 | PASS-SCHRAUBE LENKUNG AN LENKUNGSBOCK |
001 | N 000609 010011 |
| 048 | SCHRAUBE LENKUNG AN LENKUNGSBOCK |
003 | N 000931 010282 |
| 054 | FEDERRING LENKUNG AN LENKUNGSBOCK |
003 | N 912004 010102 |
| 057 | FEDERRING LENKUNG AN LENKUNGSBOCK |
001 | N 912006 012000 |
| 060 | SCHRAUBE LENKUNGSBOCK AN RAHMEN M 10X35 |
004 | N 000933 010145 |
| 060 | SCHRAUBE LENKUNGSBOCK AN RAHMEN M 10X28 |
001 | N 000933 010157 |
| 060 | SCHRAUBE LENKUNGSBOCK AN RAHMEN M 10X45 |
001 | N 000933 010328 |
| 068 | MUTTER Ersetzt durch: N 910113 010000 |
- | N 913004 010008 |
| 068 | SECHSKANTMUTTER LENKUNGSBOCK AN RAHMEN |
005 | N 910113 010000 |
| 074 | SCHEIBE Ersetzt durch: N 000125 010532 |
- | N 000125 010518 |
| 074 | SCHEIBE LENKUNGSBOCK AN RAHMEN |
001 | N 000125 010532 |
| 090 | HALTER Ersetzt durch: A 318 492 38 41 |
- | A 601 542 00 40 |
| 090 | HALTER Ersetzt durch: A 318 492 34 41 |
- | A 318 492 38 41 |
| 090 | HALTER LENKUNGSBOCK AN RAHMEN FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.273827 TO BE ADAPTED DURING ASSEMBLY |
001 | A 318 492 34 41 |
| 098 | KREUZGELENK Ersetzt durch: A 309 460 01 57 |
- | A 309 460 00 57 |
| 098 | KREUZGELENK COWL, LEFT UP TO IDENT N.215365,HOLE SPACING:125 MM FROM IDENT NO.500001-533590, P 0000001,HOLE SPACING:125 MM ON EXCHANGE OF BODY SHELL AFTER AUGUST 1,1982,TAKE PART NUMBER FROM SA 43 761 OR SA 43 762 COWL, RIGHT UP TO IDENT N.215265,HOLE SPACING:125 MM |
001 | A 309 460 01 57 |
| 098 | KREUZGELENK COWL, LEFT FROM IDENT NO.215366-499999,HOLE SPACING:130 MM COWL, RIGHT FROM IDENT NO.215266-499999,HOLE SPACING:130 MM P 000001 FROM IDENT NO.553591,HOLE SPACING:130 MM |
001 | A 309 460 02 57 |
| 098 | KREUZGELENK COWL, LEFT FROM IDENT NO.215366-499999,HOLE SPACING:130 MM COWL, RIGHT FROM IDENT NO.215266-499999,HOLE SPACING:130 MM P 000001 FROM IDENT NO.553591,HOLE SPACING:130 MM |
001 | A 667 460 00 57 |
| 098 | KREUZGELENK COWL, LEFT FROM IDENT NO.215366-499999,HOLE SPACING:130 MM COWL, RIGHT FROM IDENT NO.215266-499999,HOLE SPACING:130 MM P 000001 FROM IDENT NO.553591,HOLE SPACING:130 MM |
001 | A 667 460 01 57 |
| 098 | KREUZGELENK UP TO IDENT NO. 941505 EXCEPT FOR 899081-941503 ONLY WITH OM601/OM602 ENGINE UP TO IDENT NO. P 000001 10/50 USED WITH 3700 MM WHEELBASE FROM CHASSIS 500001-624244 |
001 | A 611 460 00 57 |
| 106 | SCHRAUBE KREUZGELENK AN LENKSPINDEL M 8X38 |
002 | A 316 990 01 14 |
| 112 | SECHSKANTMUTTER KREUZGELENK AN LENKSPINDEL |
002 | N 910113 008001 |
| 120 | LENKSTANGE LEMFOERDER FROM IDENT NO.941506, P 000001 ALSO INSTALLED ON 601.361,362,366,367,371,372,376,377: FROM IDENT NO. 240114-499999 ALSO INSTALLED ON 234163 601.371,372,376,377: 556500 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 601 460 15 05 |
| 120 | LENKSTANGE Ersetzt durch: A 309 460 32 05 |
- | A 601 460 03 05 |
| 120 | LENKSTANGE UP TO IDENT NO. 941505 EXCEPT FOR 899081-941503 ONLY WITH OM601/OM602 ENGINE P 251434 ONLY USED OM602 P 251573 ONLY USED WITH AUTOMATIC TRANSMISSION |
001 | A 309 460 32 05 |
| 121 | LENKSTANGENKOPF Ersetzt durch: A 000 460 85 48 |
- | A 000 460 41 48 |
| 121 | LENKSTANGENKOPF RECHTSGEWINDE LEMFOERDER |
001 | A 000 460 85 48 |
| 122 | LENKSTANGENKOPF Ersetzt durch: A 000 460 86 48 |
- | A 000 460 46 48 |
| 122 | LENKSTANGENKOPF LINKSGEWINDE LEMFOERDER |
001 | A 000 460 86 48 |
| MANSCHETTE LENKUNGSGELENK EHRENREICH |
002 | A 000 463 18 96 | |
| 124 | KLEMMSCHELLE LENKSTANGENKOPF AN LENKSTANGE LEMFOERDER |
002 | A 000 338 05 63 |
| 124 | KLEMMSCHELLE LENKSTANGENKOPF AN LENKSTANGE EHRENREICH |
002 | A 000 338 27 45 |
| 125 | SCHRAUBE LENKSTANGENKOPF AN LENKSTANGE M 10X45 |
002 | N 000960 010023 |
| 125 | SCHRAUBE Ersetzt durch: N 000961 010031 |
- | N 000960 010026 |
| 125 | SCHRAUBE LENKSTANGENKOPF AN LENKSTANGE M 10X40 |
002 | N 000961 010031 |
| 126 | FEDERRING LENKSTANGENKOPF AN LENKSTANGE |
002 | N 912004 010102 |
| 127 | MUTTER Ersetzt durch: N 308673 010000 |
- | N 000934 010015 |
| 127 | SECHSKANTMUTTER LENKSTANGENKOPF AN LENKSTANGE |
002 | N 308673 010000 |
| 127 | MUTTER Ersetzt durch: N 910113 010002 |
- | N 913004 010010 |
| 127 | SECHSKANTMUTTER LENKSTANGENKOPF AN LENKSTANGE |
002 | N 910113 010002 |
| 128 | MUTTER LENKSTANGE AN HEBEL |
002 | N 000979 014001 |
| 128 | MUTTER LENKSTANGE AN HEBEL SELBSTSICHERND |
002 | A 003 990 78 51 |
| 129 | SPLINT LENKSTANGE AN HEBEL TO 000 979 014 001 |
002 | N 000094 003226 |
| 130 | MANTELROHR 601.376 UP TO IDENT NO.: 249588;601.377 UP TO IDENT NO.: 249719 Ersetzt durch: A 601 460 01 16 |
- | A 601 460 00 16 |
| 130 | MANTELROHR 601.376 FROM IDENT NO.: 249589;601.377 FROM IDENT NO.: 249720 EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
001 | A 601 460 01 16 |
| 130 | MANTELROHR USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON Ersetzt durch: A 611 460 02 16 |
- | A 611 460 00 16 |
| 130 | MANTELROHR USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON |
001 | A 611 460 02 16 |
| 136 | SCHRAUBE Ersetzt durch: N 304017 008016 |
- | N 000933 008212 |
| 136 | SECHSKANTSCHR. MANTELROHR AN BODENBLECH |
002 | N 304017 008016 |
| 138 | SCHEIBE Ersetzt durch: N 009021 008213 |
- | N 009021 008205 |
| 138 | SCHEIBE MANTELROHR AN BODENBLECH Ersetzt durch: N 000000 003250 |
002 | N 009021 008213 |
| 138 | SCHEIBE MANTELROHR AN BODENBLECH |
002 | N 000000 003250 |
| 142 | ABDECKUNG MANTELROHR AN BODENBLECH |
001 | A 601 462 01 95 |
| ABDICHTUNG ABDECKUNG AN MANTELROHR NOT USED |
- | A 601 462 00 97 | |
| ABDICHTUNG ABDECKUNG AN MANTELROHR NOT USED |
- | A 601 462 01 97 | |
| 142 | ABDICHTUNG ABDECKUNG AN MANTELROHR |
001 | A 601 462 02 97 |
| 148 | SCHELLE Ersetzt durch: A 611 995 04 10 |
- | A 601 995 04 10 |
| 148 | SCHELLE MANTELROHR AN INSTRUMENTENTAFEL |
001 | A 611 995 04 10 |
| 154 | SCHRAUBE (ABREISS-SCHRAUBE) BEFESTIGUNG LENKSCHLOSS |
002 | A 000 462 22 71 |
| 166 | BUECHSE MANTELROHR,LENKSPINDEL |
001 | A 608 462 00 50 |
| 172 | RING MANTELROHR,LENKSPINDEL |
001 | A 608 462 01 65 |
| 190 | LENKSPINDEL Ersetzt durch: A 601 460 01 09 |
- | A 601 460 06 09 |
| 190 | LENKSPINDEL COWL, LEFT UP TO IDENT N.215365,HOLE SPACING:125 MM FROM IDENT NO.500001-533590, P 0000001,HOLE SPACING:125 MM ON EXCHANGE OF BODY SHELL AFTER AUGUST 1,1982,TAKE PART NUMBER FROM SA 43 761 OR SA 43 762 COWL, RIGHT UP TO IDENT N.215265,HOLE SPACING:125 MM |
001 | A 601 460 01 09 |
| 190 | LENKSPINDEL COWL, LEFT FROM IDENT NO.215366-499999,HOLE SPACING:130 MM COWL, RIGHT FROM IDENT NO.215266-499999,HOLE SPACING:130 MM P 000001 FROM IDENT NO.553591,HOLE SPACING:130 MM EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
001 | A 601 460 09 09 |
| 190 | LENKSPINDEL COWL, LEFT FROM IDENT NO.215366-499999,HOLE SPACING:130 MM COWL, RIGHT FROM IDENT NO.215266-499999,HOLE SPACING:130 MM P 000001 FROM IDENT NO.553591,HOLE SPACING:130 MM EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
001 | A 601 460 11 09 |
| 190 | LENKSPINDEL USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON |
001 | A 611 460 00 09 |
| 190 | LENKSPINDEL USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON |
001 | A 611 460 07 09 |
| 196 | MITNEHMER LENKRAD EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
001 | A 601 464 01 47 |
| 202 | SCHRAUBE MITNEHMER AN LENKRAD EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
002 | N 000965 005004 |
| 219 | LENKUNGSSCHLOSS LENKUNGSSCHLOSS AN MANTELROHR FROM IDENT NO. 240085-499999 + FROM IDENT NO. 556500 ALSO INSTALLED ON FROM IDENT NO. 655871-690172 NOT FOR USE WITH FRONT AXLE 730.403 FROM IDENT NO. 500001-556499 |
001 | A 601 462 03 30 |
| 219 | LENKUNGSSCHLOSS LENKUNGSSCHLOSS AN MANTELROHR EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 |
001 | A 601 462 02 30 |
| 222 | ZUENDSCHALTER FROM IDENT NO. 240085-499999 + FROM IDENT NO. 556500 ALSO INSTALLED ON FROM IDENT NO. 655871-690172 NOT FOR USE WITH FRONT AXLE 730.403 FROM IDENT NO. 500001-556499 |
001 | A 000 462 19 93 |
| 222 | ZUENDSCHALTER EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 |
001 | A 116 462 00 93 |
| 225 | VENTIL FUER DIESELSCHLUESSELANLASSUNG EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 |
001 | A 000 460 02 84 |
| 228 | SCHLIESSZYL. Ersetzt durch: A 601 460 03 04 |
- | A 115 462 41 30 |
| 228 | SCHLIESSZYL. MIT BESTIMMTER SCHLIESSUNG STATE LOCK NUMBER WHEN ORDERING |
001 | A 601 460 03 04 |
| 230 | SCHLIESSZYL. OHNE BESTIMMTE SCHLIESSUNG |
001 | A 000 462 93 30 |
| 231 | SCHLUESSEL YMOS/HM STATE LOCK NUMBER WHEN ORDERING |
001 | A 000 760 06 06 |
| 231 | SCHLUESSEL MIT BESTIMMTER SCHLIESSUNG HUF/HZ STATE LOCK NUMBER WHEN ORDERING |
001 | A 000 760 00 06 |
| 232 | SCHLUESSEL ROHLING YMOS/HM |
001 | A 000 766 53 06 |
| 232 | SCHLUESSEL ROHLING HUF/HZ |
001 | A 000 766 37 06 |
| 234 | DECKEL Ersetzt durch: A 123 462 05 23 |
- | A 115 462 04 23 |
| 234 | ABDECKHUELSE | 001 | A 123 462 05 23 |
| 240 | KLEMMSTUECK Ersetzt durch: A 115 460 03 22 |
- | A 115 460 00 22 |
| 240 | KLEMMSTUECK SCHLOSSHALTER |
001 | A 115 460 03 22 |
| 246 | SCHRAUBE SCHLOSSHALTER |
001 | N 000931 006118 |
| 290 | LENKRAD EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
001 | A 601 464 01 01 |
| 290 | LENKRAD EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
001 | A 601 464 02 01 |
| 290 | LENKRAD EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
001 | A 601 464 03 01 |
| 290 | LENKRAD USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON |
001 | A 611 460 00 03 |
| 292 | KONTAKTSTUECK USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON |
002 | A 000 464 09 43 |
| 295 | MUTTER LENKRAD AN LENKSPINDEL |
001 | N 000439 018204 |
| 300 | FIRMENZEICHEN LENKRAD EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 232933 + FROM IDENT NO. 500001-541790 EXCEPT FOR |
001 | A 000 464 04 32 |
| 304 | SIGNALPLATTE LENKRAD USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON |
001 | A 611 460 01 47 |
| 308 | KONTAKTPLATTE LENKRAD USED FOR EXHAUST SYSTEM WITH PRE-MUFFLER ALSO INSTALLED ON |
001 | A 611 464 01 17 |
| 312 | SCHLAUCH Ersetzt durch: A 335 997 22 82 |
- | A 000 997 39 52 |
| 312 | SCHLAUCH VOM LENKSCHLOSS ZUR LEITUNG UNTERDRUCKPUMPE 4X1 MM EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 ORDER BY THE METER |
NB | A 335 997 22 82 |
| 316 | ROHRABSCHNITT Ersetzt durch: A 000 158 14 35 |
- | A 000 997 41 52 |
| 316 | ROHRLEITUNG UNTERDRUCKLEITUNG VOM LENKUNGSSCHLOSS ZUR EINSPRITZPUMPE EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 ORDER BY THE METER |
NB | A 000 158 14 35 |
| 320 | SCHLAUCH VOM LENKSCHLOSS ZUR LEITUNG UNTERDRUCKPUMPE 30 MM EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 ORDER BY THE METER |
NB | A 007 997 61 82 |
| 320 | SCHLAUCH SCHLAUCH ZUR EINSPRITZPUMPE 50 MM EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 240084 + FROM IDENT NO. 500001-223166 |
NB | A 007 997 61 82 |
| 320 | SCHLAUCH LENKUNGSSCHLOSS 30 MM EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 |
NB | A 007 997 61 82 |
| 322 | SCHLAUCH Ersetzt durch: A 117 078 05 81 |
- | A 107 833 01 97 |
| 322 | SCHLAUCH SCHLAUCH ZUR EINSPRITZPUMPE ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
001 | A 117 078 05 81 |
| 322 | SCHLAUCH ANSCHLUSS UNTERDRUCKLEITUNG FROM IDENT NO. 941506, P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 117 078 05 81 |
| 322 | SCHLAUCH ANSCHLUSS UNTERDRUCKLEITUNG FROM IDENT NO. 941506, P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE ORDER BY THE METER |
NB | A 001 997 81 52 |
| 322 | ISOLIERSCHLAUCH ANSCHLUSS UNTERDRUCKLEITUNG FROM IDENT NO. 941506, P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE ORDER BY THE METER |
NB | N 040621 010200 |
| 324 | BINDER SCHLAUCH AN KRAFTSTOFFLEITUNG EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 |
NB | A 001 997 83 90 |
| 328 | TUELLE EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 695501 Ersetzt durch: A 601 997 36 81 |
- | A 601 997 22 81 |
| 328 | TUELLE UNTERDRUCKLEITUNG DURCH HAUBENBUEGEL EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 230633 + FROM IDENT NO. 500001-541790 AS OF IDENT NO. 556500 AS OF IDENT NO. P 000001 |
001 | A 601 997 36 81 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy