TRANSMISSION

EPC / Mercedes / 1 / FG / FG 188.013 / 26 / 013
‹ ›

№- Наименование К* Номер детали A

TRANSMISSION 		- XXX XXX XXX XXXX -
001 TRANSMISSION, FULLY
SYNCHRONIZED WITH CLUTCH HOUSING 		001 A 18 826 002 04  -
002 TRANSMISSION CASE 001 A 18 626 000 11  -
003 CYLINDER PIN
6 H 8X16 DIN 7 GERUNDET 		002 -

TRANSMISSION GEARS 		- XXX XXX XXX XXXX -
005 REVERSE GEAR, 17 TEETH 001 A 12 026 003 25  -
006 BUSHING 001 A 12 026 303 50  -
007 REVERSE SHAFT 001 A 18 626 300 30  -
008 THREADED PIN
M 10X45 DIN 417-5 S WITH HARDENED PIVOT FOR SHAFT AT TRANSMISSION HOUSING 		001 -
009 HEX. NUT
M 10 DIN 934-5 S FOR SHAFT AT TRANSMISSION HOUSING 		001 -
010 INTERMEDIATE LEVER
FOR REVERSE GEAR 		001 A 13 626 000 37  -
011 DOWEL PIN
8X14 N 37 B 		001 -
012 SHIFT DOG
AT INTERM. LEVER FOR REVERSE GEAR 		001 A 13 626 300 23  -
013 COUNTERSHAFT WITH KEY 001 A 18 626 010 24  -
014 KEY 001 A 18 699 103 68  -
015 COUNTERSHAFT GEAR,
24 TEETH FOR 3RD GEAR 		001 A 18 626 304 13  -
016 COUNTERSHAFT GEAR,
28 TEETH FOR 4TH GEAR 		001 A 18 626 307 10  -
017 CIRCLIP
35X2 DIN 471 VERSTÄRKT ON COUNTERSHAFT 		001 -
018 ANNULAR GROOVED BEARING
6305 C-3 DIN 625 		002 -
019 SPACER 0.25 MM THICK
OPTIONAL TO ANNULAR GROOVED BEARING ON COUNTERSHAFT 		001 A 12 026 315 52  -
SPACER 0.50 MM THICK
OPTIONAL TO ANNULAR GROOVED BEARING ON COUNTERSHAFT 		001 A 12 026 316 52  -
SPACER 1.00 MM THICK
OPTIONAL TO ANNULAR GROOVED BEARING ON COUNTERSHAFT 		001 A 12 026 308 52  -
SPACER 0.10 MM THICK
OPTIONAL TO ANNULAR GROOVED BEARING ON COUNTERSHAFT 		001 A 12 026 314 52  -
020 PROTECTIVE WASHER
AT ANNULAR GROOVED BEARING, REAR 		001 A 18 699 018 40  -
021 DRIVE SHAFT WITH KEY 001 A 18 626 017 20  -
022 KEY 002 A 18 699 102 68  -
023 HELICAL GEAR, 19 TEETH
ON DRIVE SHAFT 		001 A 18 626 208 10  -
024 OIL SLINGER RING
ON DRIVE SHAFT 		001 A 18 626 200 66  -
025 SPACER RING
FOR BEARING, DRIVE SHAFT 		001 A 18 626 204 51  -
026 ANNULAR CYLINDER
ROLLER BEARING NUM 30 N/NA DIN 5412 UP TO TRANSMISSION NO. 5500738 		001 -
ANNULAR GROOVED BEARING
6306 ZN DIN 625 FROM TRANSMISSION NO. 5500739 		001 -
027 CIRCLIP
SP 72 A DIN 5417 UP TO TRANSMISSION NO. 55 00738 		001 -
028 ANNULAR GROOVED BEARING
6306 Z DIN 625 UP TO TRANSMISSION NO. 55 00738 		001 -
029 SPACER 0.3 MM THICK
OPTIONAL 184 262 03 52/04 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 18 426 200 52  -
SPACER 0.4 MM THICK
OPTIONAL 184 262 03 52/04 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 18 426 201 52  -
SPACER 0.5 MM THICK
OPTIONAL 184 262 03 52/04 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 18 426 202 52  -
SPACER 0.6 MM THICK
OPTIONAL WITH 184 262 00 52/0152/02 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 18 426 203 52  -
SPACER 0.7 MM THICK
OPTIONAL WITH 184 262 00 52/0152/02 52 FOR DRIVE SHAFT AT TRASMISSION CASE UP TO TRANSMISSION NO. 55 00738 		NB A 18 426 204 52  -
29a CIRCLIP 1.9 MM
OPTIONAL FROM TRANSMISSION NO. 55 00739 		001 A 13 699 406 35  -
CIRCLIP 2.00 MM
OPTIONAL FROM TRANSMISSION NO. 55 00739 		001 A 13 699 409 35  -
CIRCLIP 2.05 MM
OPTIONAL FROM TRANSMISSION NO. 55 00739 		001 A 13 699 407 35  -
29b SPACER SLEEVE
FROM TRANSMISSION NO. 55 00739 		001 A 18 726 200 53  -
29c SPACER 0.1 MM THICK
OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION CASE FROM TRANSMISSION NO. 55 00739 		001 A 13 626 206 52  -
SPACER 0.2 MM THICK
OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION CASE FROM TRANSMISSION NO. 55 00739 		001 A 13 626 207 52  -
SPACER 0.3 MM THICK
OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION CASE FROM TRANSMISSION NO. 55 00739 		001 A 13 626 208 52  -
030 CIRCLIP
FOR DRIVE SHAFT 		001 A 13 626 200 94  -

MAIN SHAFT 		- XXX XXX XXX XXXX -
033 MAIN SHAFT
GROOVES WITH INVOLUTE TOOTHING 		001 A 18 626 212 05  -
034 INSERT-TYPE KEY
ON MAIN SHAFT FOR 1ST AND 2ND GEAR 		001 A 12 026 200 81  -
035 SYNCHRONIZING BODY
FOR 1ST AND 2ND GEAR 		001 A 18 626 011 45  -
036 SYNCHRONIZING BODY 001 A 18 626 206 35  -
037 PRESSURE SPRING
TO SYNCHRONIZING BODY 		003 A 12 099 314 01  -
038 STEEL BALL 6.5 MM
III DIN 5401 		003 -
039 FOLLOWER 003 A 19 426 200 40  -
040 SLEEVE, REINFORCED
FOR 1ST AND 2ND GEAR 		001 A 18 626 205 23  -
041 SYNCHRONIZING RING
FOR 2ND GEAR 		001 A 18 626 207 36  -
41a SYNCHRONIZING RING
FOR 1ST GEAR 		001 A 18 626 214 36  -
042 BUTTING RING,
7.90-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 12 026 216 62  -
BUTTING RING,
7.95-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 12 026 217 62  -
BUTTING RING,
8.00-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 12 026 218 62  -
BUTTING RING,
8.05-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 12 026 219 62  -
BUTTING RING,
8.10-MM THICK OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, FRONT 		001 A 12 026 220 62  -
043 GUARD PLATE 4.40 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 12 026 211 62  -
GUARD PLATE 4.45 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 12 026 212 62  -
GUARD PLATE 4.50 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 12 026 213 62  -
GUARD PLATE 4.55 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 12 026 214 62  -
GUARD PLATE 4.60 MM THICK
OPTIONAL FOR SYNCHRONIZING BODY 1ST AND 2ND GEAR, REAR 		001 A 12 026 215 62  -
044 HELICAL GEAR, 25 TEETH
FOR 2ND GEAR 		001 A 18 626 207 12  -
045 ROLLER RACE, PARTED
IN HELICAL GEAR, 2ND GEAR 		001 A 12 098 103 12  -
046 HELICAL GEAR, 25 TEETH
FOR 3RD GEAR 		001 A 18 626 013 44  -
047 GUARD PLATE
ON MAIN SHAFT FOR 3RD GEAR 		001 A 12 026 223 62  -
048 SYNCHRONIZING BODY
FOR 3RD AND 4TH GEAR 		001 A 12 026 004 45  -
049 SYNCHRONIZING BODY 001 A 12 026 208 35  -
050 PRESSURE SPRING 003 A 12 099 314 01  -
051 STEEL BALL 6.5 MM
III DIN 5401 		003 -
052 FOLLOWER 003 A 19 426 200 40  -
053 SLEEVE
FOR 3RD AND 4TH GEAR 		001 A 12 026 209 23  -
054 SYNCHRONIZING RING
FOR 3RD AND 4TH GEAR 		002 A 18 626 207 36  -
055 GROOVED NUT
ON MAIN SHAFT, FRONT 		001 A 12 026 203 26  -
056 LOCKING PLATE
TO GROOFED NUT 		001 A 12 099 401 15  -
057 ROLLER CAGE 16X24X20
OPTIONAL 		001 A 00 098 108 12  -
ROLLER CAGE 16X24X20
OPTIONAL 		001 A 00 098 109 12  -
058 HELICAL GEAR, 28 TEETH
FOR 1ST GEAR 		001 A 18 626 214 11  -
059 ROLLER CAGE
FOR HELICAL GEAR, 1ST GEAR 		001 A 12 098 102 12  -
060 GUARD PLATE 3.8 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 18 626 201 62  -
GUARD PLATE 3.9 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 18 626 202 62  -
GUARD PLATE 4.0 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 18 626 203 62  -
GUARD PLATE 4.1 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 18 626 204 62  -
GUARD PLATE 4.2 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 18 626 205 62  -
GUARD PLATE 4.3 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 18 626 206 62  -
GUARD PLATE 4.4 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 18 626 207 62  -
GUARD PLATE 4.5 MM THICK
OPTIONAL FOR HELICAL GEAR, 1ST GEAR 		NB A 18 626 208 62  -
061 ANNULAR GROOVED BEARING
ON MAIN SHAFT 		001 A 13 698 102 25  -
062 CIRCLIP
SP 72 A DIN 5417 		001 -
063 SPACER 0.1 MM THICK
OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 13 626 204 52  -
SPACER 0.2 MM THICK
OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 13 626 205 52  -
SPACER 0.3 MM THICK
OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 13 626 209 52  -
064 HELICAL GEAR, 7 TEETH
FOR SPEEDOMETER DRIVE 		001 A 12 026 407 30  -
065 TRANSMISSION CASE
COVER, FRONT 		001 A 18 626 003 21  -
066 SEALING RING
FOR DRIVE SHAFT 		001 A 18 626 100 60  -
067 BALL PIN
FOR RELEASE FORK 		001 A 18 699 100 15  -
069 HEX.-HD. SCREW
M 8X45 DIN 931 - 8 G FOR TRANSMISSION CASE COVER, FRONT AT TRANSMISSION CASE 		002 -
070 HEX.-HD. SCREW
M 8X20 DIN 933-8 G FOR TRANSMISSION CASE COVER, FRONT AT TRANSMISSION CASE 		004 -
071 LOCKING PLATE
FOR TRANSMISSION CASE COVER, FRONT AT TRANSMISSION CASE 		006 A 18 099 400 15  -
072 TRANSMISSION CASE
COVER, REAR INJECTION DIE-CASTING 		001 A 12 026 020 16  -
073 PLUG 001 A 15 326 400 55  -
074 SEALING RING
FOR MAIN SHAFT 		001 A 00 099 717 46  -
075 SEALING RING
FOR SPEEDOMETER/DRIVE SHAFT 		001 A 12 026 100 80  -
076 SHAFT
FOR SPEEDOMETER DRIVE 		001 A 12 026 404 32  -
077 SMALL DRIVE
GEAR, 16 TEETH FOR SPEEDOMETER DRIVE 		001 A 13 626 400 31  -
078 SPRING WASHER
B 6 DIN 137 FOR SPEEDOMETER DRIVE SHAFT AT TRANSMISSION CASE REAR 		001 -
079 HEX.-HD. SCREW
M 6X30 DIN 931-8 G FOR SPEEDOMETER DRIVE SHAFT AT TRANSMISSION CASE REAR 		001 -
080 GASKET
FOR TRANSMISSION CASE COVER, REAR AT TRANSMISSION CASE 		001 A 18 626 104 79  -
081 HEX.-HD. SCREW
M 8X22 DIN 933-8 G FOR TRANSMISSION CASE COVER, REAR AT TRANSMISSION CASE 		002 -
082 LOCKING PLATE
FOR TRANSMISSION CASE COVER, REAR AT TRANSMISSION CASE 		006 A 18 099 400 15  -
083 COLLAR SCREW
FOR TRANSMISSION CASE COVER, REAR AT TRANSMISSION CASE 		004 A 12 099 000 10  -
085 THREE-WAY FLANGE
ON MAIN SHAFT 		001 A 18 626 208 45  -
086 GROOVED NUT
FOR THREE-WAY FLANGE AT MAIN SHAFT 		001 A 18 626 202 26  -
087 LOCK
FOR THREE-WAY FLANGE AT MAIN SHAFT 		001 A 18 626 802 73  -
088 LOCKING SCREW
FOR OIL OUTLET AND OIL FILLING AT TRANSMISSION CASE 		002 A 18 699 700 32  -
092 HEX.-HD. SCREW
M 10X40 DIN 931-8 G FOR TRANSMISSION AT CYLINDER CRANKCASE 		003 -
093 HEX.-HD. SCREW
M 10X50 DIN 931-8 G FOR TRANSMISSION AT CYLINDER CRANKCASE 		002 -
094 SPRING WASHER
B 10 DIN 137 FOR TRANSMISSION AT CYLINDER CRANKCASE 		004 -
095 WASHER
10,5 DIN 125 FOR TRANSMISSION AT CYLINDER CRANKCASE 		003 -
096 LOCK WASHER
B 10 DIN 127 FOR TRANSMISSION AT CYLINDER CRANKCASE 		001 -
097 HEX. NUT
M 10 DIN 934-5 S FOR TRANSMISSION AT CYLINDER CRANKCASE 		002 -
Для того чтобы узнать где купить деталь или аналог, кликните по номеру детали.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA