REAR AXLE

EPC / Mercedes / 1 / FG / FG 180.011 / 35 / 022
‹ ›

№- Наименование К* Номер детали A

REAR AXLE TUBE 		- XXX XXX XXX XXXX -
045 REAR AXLE
TUBE, LEFT, WITH THRUST ARM SUPPORT AND SCREW PLUG 		001 A 18 035 044 19  -

Заменено на: A  180 350 39 19 		- A 18 035 032 19  -
REAR AXLE
TUBE, RIGHT, WITH THRUST ARM SUPPORT
Заменено на: A  180 350 39 19 		- A 18 035 045 19  -
046 REAR AXLE
TUBE, RIGHT, WITH THRUST ARM SUPPORT 		001 A 18 035 039 19  -
047 BUSHING
FOR REAR AXLE TUBE, RIGHT 		002 A 18 035 101 50  -
47a CONICAL PLUG
ASM 10X1 N 87 FOR REAR AXLE TUBE 180 350 45 19 		001 -
SCREW PLUG
M 24X1,5 DIN 906 FOR OIL FILLING IN AT REAR AXLE TUBE, LEFT
Заменено на: A  186 997 00 32 		- -
048 SCREW PLUG
FOR OIL FILLING IN AT REAR AXLE TUBE, LEFT 		001 A 18 699 700 32  -
049 BREATHER
FOR REAR AXLE TUBE 		001 A 18 035 002 90  -

UNIVERSAL JOINT, SLIDING 		- XXX XXX XXX XXXX -
053 UNIVERSAL JOINT, SLIDING 001 A 18 035 005 13  -
UNIVERSAL JOINT, SLIDING 001 A 18 035 008 13  -
WASHER
IN SLIDING YOKE
Заменено на: A  188 357 00 52 		- A 18 035 700 52  -
054 WASHER
IN SLIDING YOKE UP TO REAR AXLE 7509694 		002 A 18 835 700 52  -
054 WASHER
IN SLIDING YOKE FROM REAR AXLE 7509695 		001 A 18 835 700 52  -
54a WASHER
IN SLIDING YOKE FROM REAR AXLE 7509695 		001 A 18 035 701 52  -
055 LOCKING RING
48X1,75 DIN 472 IN SLIDING YOKE UP TO REAR AXLE 8515769 		002 -
055 LOCKING RING
48X1,75 DIN 472 IN SLIDING YOKE FROM REAR AXLE 8515770 		001 -
55a LOCKING RING
IN SLIDING YOKE FROM REAR AXLE 8515770 		001 A 00 099 429 41  -
056 UNIVERSAL CROSS 001 A 18 035 700 13  -
057 NEEDLE BEARING BUSHING 004 A 12 035 701 14  -
058 NEEDLE
2,5X11,8 II DIN 5402 		100 -
059 SNAP RING 2.25 MM THICK
OPTIONAL 		NB A 12 099 401 35  -
SNAP RING 2.35 MM THICK
OPTIONAL 		NB A 12 099 404 35  -
SNAP RING 2.40 MM THICK
OPTIONAL 		NB A 12 099 406 35  -
SNAP RING 2.45 MM THICK
OPTIONAL 		NB A 12 099 407 35  -
SNAP RING 2.55 MM THICK
OPTIONAL 		NB A 12 099 408 35  -
060 SLIDING SLEEVE
WITH GUIDE PLATE IN SLIDING YOKE 		001 A 18 035 007 13  -
SLIDING SLEEVE
WITH GUIDE PLATE IN SLIDING YOKE 		001 A 18 035 008 13  -
061 LOCKING RING
32X1,5 DIN 471 IN SLIDING YOKE 		002 -
062 CYLINDR. ROLLER
IN SLIDING YOKE 		132 A 18 098 100 86  -
062 CYLINDR. ROLLER
IN SLIDING YOKE 		108 A 18 098 100 86  -

Заменено на: A  110 357 01 91 		- A 18 035 704 91  -
RUBBER SLEEVE
Заменено на: A  110 357 01 91 		- A 18 035 705 91  -
063 RUBBER SLEEVE 001 A 11 035 701 91  -
064 TIGHTENING SCREW
FOR YOKE, INNER 		001 A 18 035 300 76  -
065 LOCK WASHER
B 10 DIN 127 FOR YOKE, INNER 		001 -
066 SHIM 1.00 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 330 52  -
SHIM 1.10 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 331 52  -
SHIM 1.20 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 333 52  -
SHIM 1.30 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 335 52  -
SHIM 1.40 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 337 52  -
SHIM 1.50 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 339 52  -
SHIM 1.60 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 341 52  -
SHIM 1.70 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 343 52  -
SHIM 1.80 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 345 52  -
SHIM 1.90 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 347 52  -
SHIM 2.00 MM THICK
OPTIONAL FOR YOKE INNER 		001 A 18 035 349 52  -

REAR AXLE SHAFT 		- XXX XXX XXX XXXX -
070 REAR AXLE SHAFT, LEFT 001 A 18 035 013 10  -
REAR AXLE SHAFT, LEFT 001 A 18 035 019 10  -
071 WHEEL FIXING PIN 005 A 12 040 101 71  -
072 REAR AXLE SHAFT, RIGHT 001 A 18 035 014 10  -
REAR AXLE SHAFT, RIGHT
WITH PRESSURE SPRING AND LOCKING 		001 A 18 035 022 10  -
073 WHEEL FIXING PIN 005 A 12 040 101 71  -
LOCKING PIN 001 A 18 035 700 74  -
PRESSURE SPRING 001 A 18 099 331 01  -
LOCKING WASHER
3,2 DIN 6799 		001 -
GROOVED BEARING
FOR REAR AXLE SHAFT
Заменено на: A  183 981 00 25 		- A 18 098 100 25  -
074 GROOVED BEARING
FOR REAR AXLE SHAFT 		002 A 18 398 100 25  -
075 LOCKING PLATE
FOR REAR AXLE SHAFT 		002 A 18 335 303 73  -
076 GROOVED NUT
FOR REAR AXLE SHAFT 		002 A 15 335 700 26  -
077 HEX. -HD. SCREW
M 10 X 22 DIN 933-8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING 		004 -
078 HEX. -HD. SCREW
M 7 X 22 DIN 933-8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING 		004 -
REPLACED BY S 9 N 262 - A 00 098 902 83  -
079 HOSE CLAMP
S 9 N 262 		002 -
REPLACED BY
9X0, 4X760 N 263 		- A 00 098 900 82  -
080 HOSE STRAP
9X0,4X760 N 263 ORDER BY THE METER 		002 -
081 BRAKE DRUM 002 A 18 042 108 01  -
SPHERICAL COLLAR NUT
FOR BRAKE DRUM AT WHEEL BOLT REAR WHEEL HUB
Заменено на: A  110 990 00 59 		- A 12 099 000 59  -
082 SPHERICAL COLLAR NUT
FOR BRAKE DRUM AT WHEEL BOLT REAR WHEEL HUB SEE ALSO GROUP 33 AND 40 		004 A 11 099 000 59  -

REAR AXLE SUSPENSION 		- XXX XXX XXX XXXX -
085 CONNECTION PIN
FOR REAR AXLE SUSPENSION 		001 A 18 035 106 74  -
086 SLEEVE 26.0 MM LONG
BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN 		002 A 18 035 101 53  -
SLEEVE 25.8 MM LONG
BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN OPTIONAL REPAIR DESIGN 		002 A 18 135 118 53  -
SLEEVE 25.6 MM LONG
BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN OPTIONAL REPAIR DESIGN 		002 A 18 035 117 53  -
SLEEVE 25.4 MM LONG
BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN OPTIONAL REPAIR DESIGN 		002 A 18 035 116 53  -
SLEEVE 25.2 MM LONG
BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN OPTIONAL REPAIR DESIGN 		002 A 18 035 115 53  -
SLEEVE 25.0 MM LONG
BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN OPTIONAL REPAIR DESIGN 		002 A 18 035 114 53  -
SHIM 2.0 MM THICK
FOR REAR AXLE TUBE, OUTSIDE
Заменено на: A  180 351 14 52 		- A 18 035 105 52  -
087 SHIM 2.0 MM THICK
FOR REAR AXLE TUBE, OUTSIDE 		002 A 18 035 114 52  -
088 SHIM 1.9 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 113 52  -
SHIM 2.0 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 114 52  -
SHIM 2.1 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 115 52  -
SHIM 2.2 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 116 52  -
SHIM 2.3 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 117 52  -
SHIM 2.4 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 118 52  -
SHIM 2.5 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 119 52  -
SHIM 2.6 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 127 52  -
SHIM 2.7 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 128 52  -
SHIM 2.8 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 129 52  -
SHIM 2.9 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 130 52  -
SHIM 3.0 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 120 52  -
SHIM 3.1 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002 A 18 035 131 52  -
SHIM 3.2 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002 A 18 035 132 52  -
089 SHIM
ON CONNECTION PIN AT REAR AXLE TUBE MOUNTING, OUTSIDE 		002 A 18 035 103 51  -
090 RUBBER RING
ON SHIMS 		004 A 18 035 109 86  -
091 WEDGE
FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 A 18 035 100 74  -
092 LOCK WASHER
B 8 DIN 127 FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 -
093 HEX. NUT
M 8 DIN 934-5 S FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 -
094 LOCKING RING
IN CONNECTION PIN 		001 A 18 099 403 41  -
095 COVER
20 DIN 443 IN CONNECTION PIN 		001 -
096 SPACER SLEEVE
ON CONNECTION PIN, FRONT 		001 A 18 035 111 53  -
097 LOCKING PLATE
FOR CONNECTION PIN AT SILENT BLOCK IN SUPPORT 		001 A 18 099 401 12  -
098 HEX. -HD. SCREW
FOR CONNECTION PIN AT SILENT BLOCK IN SUPPORT 		001 A 18 099 704 30  -
099 GREASE FITTING
A 6 DIN 71412 IN LEFT EYE FOR REAR AXLE TUBE, RIGHT UP TO REAR AXLE 6519124 		002 -
099 GREASE FITTING
A 6 DIN 71412 IN LEFT EYE FOR REAR AXLE TUBE, RIGHT FROM REAR AXLE 6519125 		001 -
GREASE FITTING
FOR REAR AXLE TUBE, RIGHT
Заменено на: A  000 997 11 88 		- A 00 099 708 88  -
99a GREASE FITTING
IN RIGHT EYE FOR REAR AXLE TUBE, RIGHT FROM REAR AXLE 6519125 		001 A 00 099 711 88  -
RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION
Заменено на: A  111 350 02 75 		- A 18 035 008 75  -
100 RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION 		001 A 11 135 002 75  -

Заменено на: A  180 350 09 32 		- A 18 035 007 32  -
SUPPORT WITH RETAINER
FOR REAR AXLE SUSPENSION
Заменено на: A  180 350 09 32 		- A 18 035 008 32  -
101 SUPPORT WITH RETAINER
FOR REAR AXLE SUSPENSION 		001 A 18 035 009 32  -
102 LOCK WASHER
B 10 DIN 127 FOR RUBBER MOUNTING IN SUPPORT 		002 -
103 HEX. -HD. SCREW
M 10X35 DIN 931-8G FOR RUBBER MOUNTING IN SUPPORT 		002 -
104 THRUST ARM, LEFT 001 A 18 035 000 29  -
105 THRUST ARM, RIGHT 001 A 18 035 001 29  -
106 CYLINDRICAL SCREW
FOR MOUNTING SHOCK ABSORBER 		004 A 12 099 009 20  -
107 CYLINDRICAL SCREW
FOR MOUNTING SHOCK ABSORBER 		004 A 12 099 010 20  -
108 BRACKET
FOR THRUST ARM REPAIR DESIGN AGAINST THRUST ARM RATTLING 		002 A 18 035 200 40  -
110 RUBBER MOUNTING
FOR THRUST ARM, REAR 		002 A 12 035 207 65  -
111 WASHER
FOR RUBBER MOUNTING, WHEEL SIDE FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 035 205 76  -
112 WASHER
FOR RUBBER MOUNTING, SCREW SIDE FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 035 206 76  -
113 LOCKING PLATE
FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 099 404 12  -
114 HEX. -HD. SCREW
FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 099 000 01  -
115 RUBBER MOUNTING, TOP
WITH BUSHING FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR 		001 A 18 035 110 86  -
REPLACED BY 128 350 00 67
FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR
Заменено на: A  128 350 00 67 		- A 18 035 110 45  -
WASHER
FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR TO CONTROL SWITCH 000 545 8224 		001 A 18 035 001 67  -
116 WASHER
FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR 		001 A 12 835 000 67  -
116 WASHER
FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR TO CONTROL SWITCH 001 545 1224 		001 A 12 835 000 67  -

CONTROL SWITCH SEE GROUP 54 		- XXX XXX XXX XXXX -
117 LOCKING PLATE
FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR 		001 A 18 035 103 73  -
REPLACED BY
M 22X1, 5 DIN 936-5S FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR 		- A 18 099 002 51  -
118 HEX. NUT
M 22X1,5 DIN 936-5 S FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR 		001 -
120 RUBBER RING, BOTTOM
FOR REAR AXLE SUSPENSION, BOTTOM, AT BODY FLOOR 		001 A 18 035 105 86  -
121 CROSS ARM
FOR REAR AXLE SUSPENSION, BOTTOM, AT BODY FLOOR 		001 A 18 035 101 96  -
122 SHACKLE
OPTIONAL FOR CORSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 105 40  -
SHACKLE
OPTIONAL FOR CORSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 114 40  -
123 SHACKLE
OPTIONAL FOR CROSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 104 40  -
SHACKLE
OPTIONAL FOR CROSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 113 40  -
124 HEX. -HD. SCREW
M 12X1,5X25 DIN 961-8 G FOR SHACKLE AT CROSS ARM 		001 -
125 LOCK WASHER
B 12 DIN 127 FOR SHACKLE AT CROSS ARM 		001 -
126 HEX. NUT
M 12 X 1,5 DIN 934-5 S FOR SHACKLE AT CROSS ARM 		001 -
127 HEX. -HD. SCREW
M 12X1,5X35 DIN 960-8 G FOR CROSS ARM AT SUPPORT 		001 -
128 LOCK WASHER
B 12 DIN 127 FOR CROSS ARM AT SUPPORT 		001 -
129 RUBBER MOUNTING
FOR CROSS ARM AT SUPPORT 		001 A 18 035 100 48  -
130 WASHER
FOR CROSS ARM 		001 A 18 035 100 76  -
131 SPACER TUBE
FOR CROSS ARM 		001 A 18 035 106 53  -
132 RUBBER BUFFER 002 A 18 035 107 44  -
133 CUP
FOR CROSS ARM 		002 A 18 035 103 43  -
134 LOCK WASHER
B 12 DIN 127 FOR CUP AND RUBBER BUFFER AT CROSS ARM 		001 -
135 HEX. NUT
M 12X1,5 DIN 934-5 S FOR CUP AND RUBBER BUFFER AT CROSS ARM 		001 -
REPLACED BY 111 352 00 65
FOR THRUST ARM AT BODY FLOOR
Заменено на: A  111 352 00 65 		- A 12 035 208 65  -
RUBBER MOUNTING
FOR THRUST ARM AT BODY FLOOR
Заменено на: A  111 352 00 65 		- A 18 035 200 65  -
136 RUBBER MOUNTING
FOR THRUST ARM, FRONT FOR THRUST ARM AT BODY FLOOR 		002 A 11 135 200 65  -
RETAINER
FOR RUBBER MOUNTING FOR THRUST ARM AT BODY FLOOR UP TO CHASSIS 7501115 		002 A 12 035 205 67  -
RETAINER
FOR THRUST ARM AT BODY FLOOR
Заменено на: A  110 352 00 67 		- A 18 035 201 67  -
137 RETAINER
FOR RUBBER MOUNTING FOR THRUST ARM AT BODY FLOOR FROM CHASSIS 7501116 		002 A 11 035 200 67  -
CASTLE COLLAR NUT
FOR THRUST ARM AT BODY FLOOR UP TO CHASSIS 7501115 		002 A 12 035 200 72  -
REPLACED BY 180 352 03 72
FOR THRUST ARM AT BODY FLOOR
Заменено на: A  180 352 03 72 		- A 18 035 201 72  -
CASTLE COLLAR NUT
FOR THRUST ARM AT BODY FLOOR
Заменено на: A  180 352 03 72 		- A 18 035 202 72  -
138 CASTLE COLLAR NUT
FOR THRUST ARM AT BODY FLOOR FROM CHASSIS 7501116 		002 A 18 035 203 72  -
139 COTTER PIN
3X28 DIN 94 FOR THRUST ARM AT BODY FLOOR 		002 -
Для того чтобы узнать где купить деталь или аналог, кликните по номеру детали.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA