| №- | Наименование | К* | Номер детали | A |
|---|---|---|---|---|
TRANSMISSION |
- | XXX XXX XXX XXXX | - | |
| REPLACED BY 120 260 29 01 WITHOUT CLUTCH HOUSING WITH CLUTCH RELEASE BEARING AND RELEASE FORK Заменено на: A 120 260 29 01 |
- | A 12 126 025 01 | - | |
| TRANSMISSION WITHOUT CLUTCH HOUSING WITH CLUTCH RELEASE BEARING AND RELEASE FORK Заменено на: A 120 260 29 01 |
- | A 12 126 036 01 | - | |
| 001 | TRANSMISSION WITHOUT CLUTCH HOUSING WITH CLUTCH RELEASE BEARING AND RELEASE FORK |
001 | A 12 026 029 01 | - |
| REPLACED BY 120 260 30 01 WITHOUT CLUTCH HOUSING WITH CLUTCH RELEASE BEARING AND RELEASE FORK Заменено на: A 120 260 30 01 |
- | A 12 126 037 01 | - | |
| TRANSMISSION WITHOUT CLUTCH HOUSING WITH CLUTCH RELEASE BEARING AND RELEASE FORK Заменено на: A 120 260 30 01 |
- | A 12 126 038 01 | - | |
| TRANSMISSION WITHOUT CLUTCH HOUSING WITH CLUTCH RELEASE BEARING AND RELEASE FORK |
001 | A 12 026 030 01 | - | |
TRANSMISSION HOUSING |
- | XXX XXX XXX XXXX | - | |
| 002 | TRANSMISSION HOUSING | 001 | A 18 626 000 11 | - |
| 003 | CYLINDRICAL PIN 6 H8X16 DIN 7 |
002 | - | |
TRANSMISSION GEARS |
- | XXX XXX XXX XXXX | - | |
| 005 | REVERSE GEAR | 001 | A 12 026 003 25 | - |
| 006 | BUSHING | 001 | A 12 026 303 50 | - |
| 007 | REVERSE GEAR SHAFT | 001 | A 18 626 300 30 | - |
| 008 | THREADED PIN WITH HARDENED PIVOT M 10X45 DIN 417-5S FOR REVERSE GEAR SHAFT AT TRANSMISSION HOUSING |
001 | - | |
| 009 | HEX. NUT M 10 DIN 934-5 S FOR REVERSE GEAR SHAFT AT TRANSMISSION HOUSING |
001 | - | |
| 010 | INTERMEDIATE LEVER FOR REVERSE GEAR |
001 | A 13 626 000 37 | - |
| 011 | DOWEL PIN 8 X 16 N 37 B |
001 | - | |
| 012 | SHIFTING DOG FOR REVERSE GEAR |
001 | A 13 626 300 23 | - |
| 013 | COUNTERSHAFT | 001 | A 12 026 001 24 | - |
| 014 | KEY FOR COUNTERSHAFT |
001 | A 18 699 103 68 | - |
| COUNTERSHAFT GEAR, 27 TEETH FOR 3RD GEAR Заменено на: A 120 263 03 13 |
- | A 12 026 300 13 | - | |
| 015 | COUNTERSHAFT GEAR, 27 TEETH FOR 3RD GEAR |
001 | A 12 026 303 13 | - |
| COUNTERSHAFT GEAR, 32 TEETH FOR 4TH GEAR Заменено на: A 120 263 09 10 |
- | A 12 026 306 10 | - | |
| 016 | COUNTERSHAFT GEAR, 32 TEETH FOR 4TH GEAR |
001 | A 12 026 309 10 | - |
| 017 | LOCKING RING 35X2 DIN 471 |
001 | - | |
| 018 | GROOVED BEARING 6305 C 3 DIN 625 ON COUNTERSHAFT |
002 | - | |
| SHIM 0.10 MM THICK OPTIONAL |
NB | A 12 026 314 52 | - | |
| 019 | SHIM 0.25 MM THICK OPTIONAL |
NB | A 12 026 315 52 | - |
| SHIM 0.50 MM THICK OPTIONAL |
NB | A 12 026 316 52 | - | |
| SHIM 1.00 MM THICK OPTIONAL |
NB | A 12 026 308 52 | - | |
| 020 | PROTECTIVE WASHER AT ANNULAR GROOVED BEARING, REAR |
001 | A 18 699 018 40 | - |
| 021 | DRIVE SHAFT WITH SYNCHRONIZING CONE |
001 | A 12 126 000 20 | - |
| 024 | OIL SLINGER RING ON DRIVE SHAFT |
001 | A 18 626 200 66 | - |
| 025 | GROOVED BEARING WITH COVER PLATE 6306 ZN DIN 625 |
001 | - | |
| 026 | SNAP RING | 001 | A 13 626 200 94 | - |
| 027 | SPACER RING FOR BEARING, DRIVE SHAFT |
001 | A 18 626 204 51 | - |
| 028 | SNAP RING 2.00 MM THICK OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION-HOUSING |
001 | A 13 699 409 35 | - |
| SNAP RING 1.90 MM THICK OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION-HOUSING |
001 | A 13 699 406 35 | - | |
| SNAP RING 2.05 MM THICK OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION-HOUSING |
001 | A 13 699 407 35 | - | |
| 029 | SHIM 0.10 MM THICK OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION-HOUSING |
NB | A 13 626 206 52 | - |
| SHIM 0.20 MM THICK OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION-HOUSING |
NB | A 13 626 207 52 | - | |
| SHIM 0.30 MM THICK OPTIONAL FOR DRIVE SHAFT AT TRANSMISSION-HOUSING |
NB | A 13 626 208 52 | - | |
MAIN SHAFT |
- | XXX XXX XXX XXXX | - | |
| MAIN SHAFT UP TO TRANSMISSION 7502165 |
001 | A 18 626 212 05 | - | |
| 030 | MAIN SHAFT FROM TRANSMISSION 7502166 |
001 | A 18 026 200 05 | - |
| HELICAL GEAR FOR 3RD GEAR, SLIDING BEDDED UP TO TRANSMISSION 7502165 |
001 | A 12 026 009 44 | - | |
| 031 | HELICAL GEAR FOR 3RD GEAR, NEEDLE BEDDED FROM TRANSMISSION 7502166 |
001 | A 12 126 002 44 | - |
| NEEDLE BEARING FOR 3RD GEAR Заменено на: A 000 981 29 12 |
- | A 00 098 128 12 | - | |
| 31a | NEEDLE BEARING FOR 3RD GEAR FROM TRANSMISSION 7502166 |
001 | A 00 098 129 12 | - |
| 032 | SYNCHRONIZING RING FOR 3RD AND 4TH GEAR |
002 | A 18 626 207 36 | - |
| 033 | GUARD PLATE FOR 3RD GEAR |
001 | A 12 026 223 62 | - |
| 034 | SYNCHRONIZING BODY FOR 3RD AND 4TH GEAR |
001 | A 12 026 004 45 | - |
| 035 | SYNCHRONIZING BODY | 001 | A 12 026 208 35 | - |
| REPLACED BY 180 993 41 01 ONLY EXCHANGEABLE IN SETS UP TO TRANSMISSION 7518100 Заменено на: A 180 993 41 01 |
- | A 12 099 314 01 | - | |
| PRESSURE SPRING ONLY EXCHANGEABLE IN SETS FROM TRANSMISSION 7518101 UP TO 8503936 Заменено на: A 180 993 41 01 |
- | A 18 099 338 01 | - | |
| 036 | PRESSURE SPRING FROM TRANSMISSION 8503937 |
003 | A 18 099 341 01 | - |
| 037 | STEEL BALL 6,5 MM III DIN 5401 |
003 | - | |
| FOLLOWER Заменено на: A 121 262 00 40 |
- | A 19 426 200 40 | - | |
| 038 | FOLLOWER | 003 | A 12 126 200 40 | - |
Заменено на: A 198 262 01 23 |
- | A 12 026 209 23 | - | |
| SLIDING SLEEVE Заменено на: A 198 262 01 23 |
- | A 19 826 200 23 | - | |
| 039 | SLIDING SLEEVE | 001 | A 19 826 201 23 | - |
| 040 | LOCKING PLATE FOR MAIN SHAFT, FRONT |
001 | A 12 099 401 15 | - |
| 041 | GROOVED NUT FOR MAIN SHAFT, FRONT |
001 | A 12 026 203 26 | - |
| 042 | ROLLER CAGE OPTIONAL |
001 | A 00 098 108 12 | - |
| ROLLER CAGE OPTIONAL |
001 | A 00 098 109 12 | - | |
| 043 | ROLLER CAGE, SPLIT | 001 | A 12 098 103 12 | - |
| HELICAL GEAR, 24 TEETH FOR 2ND GEAR Заменено на: A 120 262 10 12 |
- | A 12 026 207 12 | - | |
| 044 | HELICAL GEAR, 24 TEETH FOR 2ND GEAR |
001 | A 12 026 210 12 | - |
| 045 | BUTTING RING 7.90-MM THICK OPTIONAL |
001 | A 12 026 216 62 | - |
| BUTTING RING 7.95-MM THICK OPTIONAL |
001 | A 12 026 217 62 | - | |
| BUTTING RING 8.00-MM THICK OPTIONAL |
001 | A 12 026 218 62 | - | |
| BUTTING RING 8.05-MM THICK OPTIONAL |
001 | A 12 026 219 62 | - | |
| BUTTING RING 8.10-MM THICK OPTIONAL |
001 | A 12 026 220 62 | - | |
| 046 | SYNCHRONIZING RING FOR 2ND GEAR |
001 | A 18 626 207 36 | - |
| 46a | SYNCHRONIZING RING FOR 1ST GEAR |
001 | A 18 626 214 36 | - |
| 047 | SYNCHRONIZING BODY FOR 1ST AND 2ND GEAR |
001 | A 12 026 002 45 | - |
| 048 | SYNCHRONIZING BODY | 001 | A 12 026 205 35 | - |
| REPLACED BY 180 993 41 01 ONLY EXCHANGEABLE IN SETS UP TO TRANSMISSION 7518100 Заменено на: A 180 993 41 01 |
- | A 12 099 314 01 | - | |
| PRESSURE SPRING ONLY EXCHANGEABLE IN SETS FROM TRANSMISSION 7518101 TO 8503936 Заменено на: A 180 993 41 01 |
- | A 18 099 338 01 | - | |
| 049 | PRESSURE SPRING FROM TRANSMISSION 8503937 |
003 | A 18 099 341 01 | - |
| 050 | STEEL BALL 6,5 MM III DIN 5401 |
003 | - | |
| FOLLOWER Заменено на: A 121 262 00 40 |
- | A 19 426 200 40 | - | |
| 051 | FOLLOWER | 003 | A 12 126 200 40 | - |
| SLIDING SLEEVE Заменено на: A 120 262 14 23 |
- | A 12 026 208 23 | - | |
| 052 | SLIDING SLEEVE | 001 | A 12 026 214 23 | - |
| 053 | KEY FOR MAIN SHAFT, 1ST AND 2ND GEAR |
001 | A 12 026 200 81 | - |
| 054 | GUARD PLATE 4.40 MM THICK OPTIONAL |
001 | A 12 026 211 62 | - |
| GUARD PLATE 4.45 MM THICK OPTIONAL |
001 | A 12 026 212 62 | - | |
| GUARD PLATE 4.50 MM THICK OPTIONAL |
001 | A 12 026 213 62 | - | |
| GUARD PLATE 4.55 MM THICK OPTIONAL |
001 | A 12 026 214 62 | - | |
| GUARD PLATE 4.60 MM THICK OPTIONAL |
001 | A 12 026 215 62 | - | |
| 055 | ROLLER CAGE FOR 1ST GEAR |
001 | A 12 098 102 12 | - |
| HELICAL GEAR, 28 TEETH FOR 1ST GEAR Заменено на: A 120 262 10 11 |
- | A 12 026 207 11 | - | |
| 056 | HELICAL GEAR, 28 TEETH FOR 1ST GEAR |
001 | A 12 026 210 11 | - |
| 057 | GUARD PLATE 3.80-MM THICK - OPTIONAL WITH 186 262 02 62/03 62/04 62/05 62/06 62/07 62/08 62 |
NB | A 18 626 201 62 | - |
| GUARD PLATE 3.90 MM THICK OPTIONAL WITH 186 262 01 62 |
NB | A 18 626 202 62 | - | |
| GUARD PLATE 4.00 MM THICK OPTIONAL WITH 186 262 01 62 |
NB | A 18 626 203 62 | - | |
| GUARD PLATE 4.10 MM THICK OPTIONAL WITH 186 262 01 62 |
NB | A 18 626 204 62 | - | |
| GUARD PLATE 4.20 MM THICK OPTIONAL WITH 186 262 01 62 |
NB | A 18 626 205 62 | - | |
| GUARD PLATE 4.30 MM THICK OPTIONAL WITH 186 262 01 62 |
NB | A 18 626 206 62 | - | |
| GUARD PLATE 4.40 MM THICK OPTIONAL WITH 186 262 01 62 |
NB | A 18 626 207 62 | - | |
| GUARD PLATE 4.50 MM THICK OPTIONAL WITH 186 262 01 62 |
NB | A 18 626 208 62 | - | |
| 058 | GROOVED BEARING ON MAIN SHAFT |
001 | A 13 698 102 25 | - |
| 059 | SNAP RING SP 72 A DIN 5417 |
001 | - | |
| 060 | SHIM 0.10 MM THICK OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION HOUSING COVER |
NB | A 13 626 204 52 | - |
| SHIM 0.20 MM THICK OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION HOUSING COVER |
NB | A 13 626 205 52 | - | |
| SHIM 0.30 MM THICK OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION HOUSING COVER |
NB | A 13 626 209 52 | - | |
| HELICAL GEAR FOR TACHOMETER DRIVE UP TO TRANSMISSION 6508585 |
001 | A 12 126 400 30 | - | |
| HELICAL GEAR FOR TACHOMETER DRIVE Заменено на: A 120 264 08 30 |
- | A 31 926 400 30 | - | |
| 061 | HELICAL GEAR FROM TRANSMISSION 6508586 |
001 | A 12 026 408 30 | - |
| 062 | TRANSMISSION HOUSING COVER, FROM |
001 | A 12 126 000 21 | - |
| TRANSMISSION HOUSING COVER, FRONT |
001 | A 18 026 000 21 | - | |
| 063 | SEALING RING FOR DRIVE SHAFT |
001 | A 18 626 100 60 | - |
| 064 | BALL PIN FOR RELEASE FORK, CLUTCH |
001 | A 12 099 103 15 | - |
| 065 | HEX.-HD.SCREW M 8X25 DIN 931-8 G FOR TRANSMISSION HOUSING COVER, FRONT AT TRANSMISSION HOUSING |
002 | - | |
| 066 | HEX.-HD.SCREW M 8X22 DIN 933-8 G FOR TRANSMISSION HOUSING COVER, FRONT AT TRANSMISSION HOUSING |
004 | - | |
| 067 | SPRING WASHER B 8 DIN 137 FOR TRANSMISSION HOUSING COVER, FRONT AT TRANSMISSION HOUSING |
006 | - | |
| 068 | TRANSMISSION HOUSING COVER, REAR |
001 | A 12 026 020 16 | - |
| 069 | PLUG | 001 | A 15 326 400 55 | - |
| 070 | GASKET FOR TRANSMISSION HOUSING COVER, REAR |
001 | A 18 626 104 79 | - |
| 071 | SEALING RING FOR MAIN SHAFT |
001 | A 00 099 717 46 | - |
| 072 | SEALING RING FOR TACHOMETER DRIVE SHAFT |
001 | A 12 026 100 80 | - |
| 073 | SHAFT FOR TACHOMETER DRIVE |
001 | A 12 026 404 32 | - |
| DRIVE GEAR, SMALL FOR TACHOMETER DRIVE UP TO TRANSMISSION 6508585 |
001 | A 12 126 400 31 | - | |
| 074 | DRIVE GEAR, SMALL FOR TACHOMETER DRIVE FROM TRANSMISSION 6508586 |
001 | A 12 026 402 31 | - |
| 075 | SPRING WASHER B 6 DIN 137 FOR FLEXIBLE SHAFT AT TRANSMISSION HOUSING COVER, REAR |
001 | - | |
| 076 | HEX.-HD.SCREW M 6X30 DIN 931-8 G FOR FLEXIBLE SHAFT AT TRANSMISSION HOUSING COVER, REAR |
001 | - | |
| 077 | HEX.-HD.SCREW M 8X22 DIN 933-8 G FOR TRANSMISSION HOUSING COVER, REAR AT TRANSMISSION HOUSING |
006 | - | |
| 078 | SPRING WASHER B 8 DIN 137 FOR TRANSMISSION HOUSING COVER, REAR AT TRANSMISSION HOUSING |
006 | - | |
| 080 | THREE-ARM FLANGE ON MAIN SHAFT |
001 | A 18 626 208 45 | - |
| 081 | LOCK FOR GROOVED NUT FOR THREE-ARM FLANGE AT MAIN SHAFT |
001 | A 18 626 201 73 | - |
| 082 | GROOVED NUT FOR THREE-ARM FLANGE AT MAIN SHAFT |
001 | A 18 626 202 26 | - |
| SCREW PLUG M 24X1,5 M 24X1,5 DIN 906-4 S FOR FILLING IN OIL OR DRAINING OFF OIL RESP. AT TRANSMISSION FOR FILLING IN OIL Заменено на: A 186 997 00 32 |
- | - | ||
| 083 | SCREW PLUG M 24X1,5 FOR FILLING IN OIL OR DRAINING OFF OIL RESP. AT TRANSMISSION FOR FILLING IN OIL UP TO TRANSMISSION 6515822 |
002 | A 18 699 700 32 | - |
| 083 | SCREW PLUG M 24X1,5 FOR FILLING IN OIL OR DRAINING OFF OIL RESP. AT TRANSMISSION FOR FILLING IN OIL FROM TRANSMISSION 6515823 |
001 | A 18 699 700 32 | - |
| 084 | SCREW PLUG WITH COLLAR FOR OIL DRAIN TRANSMISSION FROM TRANSMISSION 6515823 |
001 | A 18 699 701 32 | - |
| 84a | SEALING RING A 14X30 DIN 7603 A1 FOR OIL DRAIN TRANSMISSION FROM TRANSMISSION 6515823 |
001 | - | |
| 085 | HEX.-HD.SCREW M 10X40 DIN 931-8 G FOR TRANSMISSION AT CYLINDER CRANKCASE |
005 | - | |
| 088 | SPRING WASHER B 10 DIN 137 FOR TRANSMISSION AT CYLINDER CRANKCASE |
004 | - | |
| 089 | WASHER 10,5 DIN 125 FOR TRANSMISSION AT CYLINDER CRANKCASE |
001 | - | |
| 090 | LOCK WASHER B 10 DIN 127 FOR TRANSMISSION AT CYLINDER CRANKCASE |
001 | - | |
| 091 | HEX. NUT M 10 DIN 934-5 S FOR TRANSMISSION AT CYLINDER CRANKCASE |
001 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy