| №- | Наименование | К* | Номер детали | A |
|---|---|---|---|---|
COMPRESSOR |
- | XXX XXX XXX XXXX | - | |
| 001 | COMPRESSOR FOR AIR CONDITIONING SYSTEM |
001 | A 00 013 146 01 | - |
| 002 | VALVE COVER WITH PRESSURE VALVE |
001 | A 00 013 108 19 | - |
| 003 | SUCTION VALVE WASHER | 002 | A 00 013 108 31 | - |
| 004 | GASKET, TOP FOR VALVE COVER |
001 | A 00 013 115 80 | - |
| 005 | GASKET, BOTTOM FOR VALVE COVER |
001 | A 00 013 116 80 | - |
| HEX.-HD. SCREW M 8X45 DIN 931-8 G FOR VALVE PLATE AND CYLINDER COVER AT COMPRESSOR HOUSING |
008 | - | ||
| 010 | O-RING IN GUIDE RING ON CRANKSHAFT |
001 | A 00 299 714 45 | - |
| 011 | SLIDE RING AND DIAPHRAGM WITH SLIDE PLATE |
001 | A 00 013 100 58 | - |
| 012 | GASKET FOR BEARING CAP, FRONT AND REAR |
003 | A 00 013 117 80 | - |
| HEX.-HD. SCREW M 8X35 DIN 931-8 G FOR BEARING CAP AT COMPRESSOR HOUSING |
008 | - | ||
| 014 | COPPER WASHER 17X12, 5X2 FOR OIL CONTROL |
001 | A 00 099 713 44 | - |
| 015 | HEX.-HD. SCREW M 12X15 DIN 933-8 G FOR OIL CONTROL |
001 | - | |
| 016 | FLANGED SHUT-OFF VALVE INTAKE SIDE |
001 | A 00 013 106 04 | - |
| 017 | FLANGED SHUT-OFF VALVE PRESSURE SIDE |
001 | A 00 013 107 04 | - |
| SEALING RING UNDER CAP NUT 16X22 DIN 7603 CU. IN FLANGED SHUT-OFF VALVE, INTAKE SIDE AND PRESSURE SIDE |
002 | - | ||
| 019 | GASKET FOR FLANGED SHUT-OFF VALVE |
002 | A 00 013 114 80 | - |
| HEX.-HD. SOCKET SCREW M 8X22 DIN 912-8 G FOR FLANGED SHUT-OFF VALVE, INTAKE SIDE, AT COMPRESSOR HOUSING |
002 | - | ||
| HEX.-HD. SOCKET SCREW M 7X55 DIN 912-8 G FOR FLANGED SHUT-OFF VALVE, PRESSURE SIDE, AT CYLINDER COVER AND COMPRESSOR HOUSING |
002 | - | ||
| 021 | PULLEY FOR COMPRESSOR |
001 | A 18 923 400 12 | - |
| 022 | WASHER FOR PULLEY TO COMPRESSOR DELIVERED TOGETHER WITH COMPRESSOR |
001 | A 18 999 002 40 | - |
| WOODRUFF KEY 5X7,5 DIN 6888 FOR PULLEY TO COMPRESSOR DELIVERED TOGETHER WITH COMPRESSOR |
001 | - | ||
| LOCK WASHER B 8 DIN 127 FOR PULLEY TO COMPRESSOR DELIVERED TOGETHER WITH COMPRESSOR |
001 | - | ||
| HEX.-HD. SCREW M 8X20 DIN 933-8 G FOR PULLEY TO COMPRESSOR DELIVERED TOGETHER WITH COMPRESSOR |
001 | - | ||
| 025 | SUPPORT FOR COMPRESSOR |
001 | A 18 923 001 40 | - |
| LOCK WASHER B 10 DIN 127 FOR SUPPORT AT CRANKCASE |
001 | - | ||
| HEX.-HD. SOCKET SCREW M 10X45 DIN 912-8 G FOR SUPPORT AT CRANKCASE |
001 | - | ||
| LOCK WASHER B 10 DIN 127 FOR COMPRESSOR AT SUPPORT |
004 | - | ||
| HEX.-HD. SCREW M 10X22 DIN 933-8 G FOR COMPRESSOR AT SUPPORT |
004 | - | ||
| 030 | SUPPORT FOR COMPRESSOR |
001 | A 18 923 400 43 | - |
| SPRING WASHER B 10 DIN 137 FOR SUPPORT AT COMPRESSOR |
NB | - | ||
| LOCK WASHER B 10 DIN 127 FOR SUPPORT AT COMPRESSOR |
001 | - | ||
| HEX.-HD. SCREW M 10X28 DIN 933-8 G FOR SUPPORT AT COMPRESSOR |
001 | - | ||
| 031 | SUPPORT FOR GUIDE PULLEY |
001 | A 18 923 400 39 | - |
| SPRING WASHER B 6 DIN 137 FOR SUPPORT AT CRANKCASE |
002 | - | ||
| HEX.-HD. SCREW M 6X50 DIN 931-8 G FOR SUPPORT AT CRANKCASE |
002 | - | ||
| 032 | INTERMEDIATE PLATE FOR SUPPORT AT DRIVE HOUSING, INJECTION PUMP |
001 | A 18 920 600 42 | - |
| LOCK WASHER B 8 DIN 127 FOR SUPPORT AT DRIVE HOUSING, INJECTION PUMP |
003 | - | ||
| HEX.-HD. SCREW M 8X25 DIN 931-8 G FOR SUPPORT AT DRIVE HOUSING, INJECTION PUMP |
001 | - | ||
| HEX.-HD. SCREW M 8X35 DIN 931-8 G FOR SUPPORT AT DRIVE HOUSING, INJECTION PUMP |
001 | - | ||
| HEX.-HD. SCREW M 8X45 DIN 931-8 G FOR SUPPORT AT DRIVE HOUSING, INJECTION PUMP |
001 | - | ||
| 035 | PULLEY WITH PIVOT PIN | 001 | A 18 923 001 15 | - |
| 036 | GROOVED BEARING 6002 DIN 625 |
002 | - | |
| 037 | LOCKING RING 32X1,2 DIN 472 |
001 | - | |
| 038 | RADIAL SEALING RING A 20X32 DIN 6504 |
001 | - | |
| 045 | TIGHTENING PIECE FOR PULLEY |
001 | A 18 923 401 40 | - |
| LOCK WASHER B 12 DIN 127 FOR PULLEY AT TIGHTENING PIECE |
001 | - | ||
| HEX. NUT M 12X1, 5 DIN 934-5 S FOR PULLEY AT TIGHTENING PIECE |
001 | - | ||
| HEX.-HD. SCREW AM 8X70 DIN 564-5 S FOR TENSION OF BELT |
001 | - | ||
| HEX. NUT M 8 DIN 934-5 S FOR TENSION OF BELT |
001 | - | ||
| 046 | NARROW V-BELT 12, 5X1500 N 275 FOR COMPRESSOR DRIVE |
001 | - | |
| 050 | AUTOMATIC FAN CLUTCH WITH FAN |
001 | A 18 920 001 22 | - |
| 051 | SEAT BRACKET | 001 | A 18 920 600 05 | - |
| SEALING RING A 10X14 DIN 7603 A1 |
002 | - | ||
| 052 | THREADED NIPPLE FOR OIL INTAKE |
001 | A 18 999 706 72 | - |
| 053 | GROOVED BEARING 6003 X DIN 625 |
001 | - | |
| 054 | NEEDLE SLEEVE | 001 | A 00 098 143 10 | - |
| 055 | THREADED NIPPLE FOR OIL EXHAUST |
001 | A 18 999 707 72 | - |
| 056 | PULLEY | 001 | A 18 920 601 11 | - |
| 057 | OIL SEAL | 001 | A 00 199 726 46 | - |
| 060 | TENSION SPRING | 001 | A 18 999 301 16 | - |
| 061 | ASCIAL GASKET | 001 | A 18 920 000 19 | - |
| 062 | "O" RING | 002 | A 00 099 770 45 | - |
| 063 | OIL SEALING RING | 001 | A 18 627 700 55 | - |
| 064 | LOCKING RING 17X1 DIN 471 |
001 | - | |
| 065 | SHIM, 0.1 MM THICK OPTIONAL |
001 | A 18 920 600 52 | - |
| SHIM, 0.2 MM THICK OPTIONAL |
001 | A 18 920 601 52 | - | |
| SHIM, 0.3 MM THICK OPTIONAL |
001 | A 18 920 602 52 | - | |
| 066 | SEALING RING | 001 | A 18 920 600 60 | - |
| 067 | COVER | 001 | A 18 920 600 03 | - |
| 068 | LOCKING RING 35X1, 5 DIN 472 |
001 | - | |
| 069 | THRUST WASHER | 001 | A 18 920 600 62 | - |
| 070 | AUTOMATIC CLUTCH | 001 | A 18 920 000 27 | - |
| 071 | NEEDLE SLEEVE | 002 | A 00 098 144 10 | - |
| 072 | OIL SEAL | 001 | A 00 199 725 46 | - |
| 073 | LOCKING RING 45X1, 75 DIN 472 |
001 | - | |
| 074 | THRUST WASHER | 001 | A 18 920 601 62 | - |
| 075 | AXIAL NEEDLE BEARING | 001 | A 00 098 000 05 | - |
| 076 | THRUST WASHER | 001 | A 18 920 601 62 | - |
| 078 | LOCKING RING 30X1, 5 DIN 471 |
001 | - | |
| SPRING WASHER A 6 DIN 137 FOR AUTOMATIC CLUTCH AT PULLEY |
012 | - | ||
| HEX.-HD. SOCKET SCREW M 6X18 DIN 912-8 G FOR AUTOMATIC CLUTCH AT PULLEY |
012 | - | ||
| 080 | FAN | 001 | A 18 920 000 24 | - |
| LOCK WASHER B 8 DIN 127 FOR FAN AT PULLEY |
003 | - | ||
| HEX.-HD. SCREW M 8X15 DIN 933-8 G FOR FAN AT PULLEY |
003 | - | ||
| LOCK WASHER B 8 DIN 127 FOR AUTOMATIC CLUTCH AT ENGINE |
003 | - | ||
| SPRING WASHER B 8 DIN 137 FOR AUTOMATIC CLUTCH AT ENGINE |
001 | - | ||
| HEX.-HD. SCREW M 8 DIN 934-5 S FOR AUTOMATIC CLUTCH AT ENGINE |
003 | - | ||
| 090 | OIL PIPE FROM FAN CLUTCH TO CYLINDER HEAD |
001 | A 18 920 001 19 | - |
| 091 | BRACKET FOR OIL PIPE AT CYLINDER HEAD |
001 | A 18 920 601 40 | - |
| LOCK WASHER B 12 DIN 127 FOR OIL PIPE AT CYLINDER HEAD |
001 | - | ||
| HEX.-HD. SCREW M 12X1, 5 DIN 936-5 S FOR OIL PIPE AT CYLINDER HEAD |
001 | - | ||
| 092 | OIL PIPE FROM OIL FILTER TO EXPANSION VALVE |
001 | A 18 918 004 30 | - |
| 093 | OIL PIPE FROM EXPANSION VALVE TO FAN CLUTCH |
001 | A 18 918 003 30 | - |
| 094 | PIPE CLAMP HALF FOR OIL PIPES AT BRACKET, CYLINDER HEAD |
001 | A 18 907 803 85 | - |
| LOCK WASHER B 6 DIN 127 FOR OIL PIPES AT BRACKET, CYLINDER HEAD |
001 | - | ||
| HEX.-HD. SCREW M 6X12 DIN 933-8 G FOR OIL PIPES AT BRACKET, CYLINDER HEAD |
001 | - | ||
| 095 | HOSE FROM FAN CLUTCH TO CYLINDER HEAD |
001 | A 00 299 781 82 | - |
| 096 | HOSE FROM OIL PIPE TO EXPANSION VALVE AND FROM EXPANSION VALVE TO FAN CLUTCH |
002 | A 00 399 733 82 | - |
| 097 | COVER PLATE AT SUPPORT, GENERATOR |
001 | A 18 923 402 40 | - |
| LOCK WASHER B 8 DIN 127 AT SUPPORT, GENERATOR |
001 | - | ||
| HEX.-HD. SCREW M 8X12 DIN 933-8 G AT SUPPORT, GENERATOR |
001 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy