ELECTRICAL EQUIPMENT AND INSTRUMENTS

EPC / Mercedes / 1 / FG / FG 121.111 / 54 / 031
‹ ›

№- Наименование К* Номер детали A

BATTERY,STARTER CABLE 		- XXX XXX XXX XXXX -
001 BATTERY 001 A 00 054 148 01  -
BATTERY
EXPORT, SPECIAL REQUEST (TROPICAL DESIGN) 		001 A 00 054 129 01  -
SPECIAL, COLD-START
BATTERY 12 V 84 AB SPECIAL REQUEST FOR REGIONS WITH COLD TEMPERATURES 		001 A 00 054 160 01  -
002 FIXING FRAME 001 A 12 054 003 23  -
003 TIGHTENING SCREW
FOR HOLDING OF BATTERY 		002 A 12 054 101 24  -
LOCK WASHER
B 6 DIN 127 FOR HOLDING OF BATTERY 		002 -
HEX. NUT
M 6 DIN 934-5 S FOR HOLDING OF BATTERY 		002 -
INSULATING HOSE,
20-MM LONG 16X18 SW DIN 40621 ON ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER 		002 -
004 RUBBER PLUG
FOR BLIND-HOLE IN FRONT WALL 		007 A 00 098 703 15  -
006 STARTER CABLE
FROM POSITIVE POLE BATTERY TO STARTERMOTOR 		001 A 13 654 014 30  -
007 RUBBER PROTECTIVE CAP
FOR STARTER CABLE 		001 A 13 654 600 35  -
07a GROMMET
FOR STARTER CABLE THROUGH ENGINE ROOM DAMPING 		001 A 18 699 704 81  -
GROUND CABLE
FROM NEGATIVE POLE, BATTERY TO COUPLING FLANGE 		001 A 18 054 004 31  -
008 GROUND CABLE
FROM NEGATIVE POLE, BATTERY TO COUPLING FLANGE 		001 A 18 054 000 31  -
009 GROMMET
FOR GROUND CABLE THROUGH FIXING ANGLE, FRONT WALL 		001 A 00 099 734 81  -

CABLES 		- XXX XXX XXX XXXX -
015 MAIN CABLE HARNESS 001 A 12 154 010 05  -
MAIN CABLE HARNESS 001 A 12 154 011 05  -
016 HOUSING, LOWER
PART WITH SOCKET IS INCLUDED IN MAIN CABLE HARNESS 		001 A 00 054 506 28  -
017 GASKET, BETWEEN
HOUSING, UPPER PART AND LOWER PART IS INCLUDED IN MAIN CABLE HARNESS 		001 A 00 054 500 80  -
17a ELECTRIC CABLE
FOR GLOW PLUG RESISTOR TO GLOW PLUG 		001 A 12 154 017 38  -
ELECTRIC CABLE
FOR GLOW PLUG RESISTOR TO GLOW PLUG 		001 A 12 054 013 38  -

Заменено на: A  121 540 08 07 		- A 12 154 006 07  -
TAIL LAMP CABLE HARNESS
Заменено на: A  121 540 08 07 		- A 12 154 007 07  -
018 TAIL LAMP CABLE HARNESS 001 A 12 154 008 07  -
026 GROUND CABLE
FROM ENGINE TO FRONT WALL 		001 A 12 154 001 41  -
HEX. NUT
M 10 DIN 936-5 S FOR GROUND CABLE AT CLUTCH HOUSING FLANGE WAS NOT INSTALLED 		- -
027 SCREW WITH LOCKING PLATE
FOR GROUND CABLE AT PEDAL FLOOR 		001 A 12 042 002 27  -
HEX. NUT
M 6 DIN 934-5 S FOR GROUND CABLE AT PEDAL FLOOR 		001 -
031 CABLE CONNECTOR, 5 POLE
FOR TAIL LAMP HARNESS 		002 A 00 054 619 41  -
032 CABLE CONNECTOR, 5 POLE
FOR STEERING SPINDLE HARNESS 		001 A 00 054 606 41  -
033 CABLE CONNECTOR, 2 POLE
FOR HEATING BLOWER CONNECTION 		002 A 00 054 618 41  -
LENS-HD. SHEET
METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5-POLE, AT WHEEL ARCH PAN 		002 -
LENS-HD. SHEET
METAL SCREW BZ 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR AT FRONT WALL 		004 -
LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		004 -
FIXING CLAMP
FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT 		001 A 18 699 502 20  -
LENS-HD. SHEET
METAL SCREW BZ 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT 		001 -
034 CABLE HARNESS
FROM 2-POLE CABLE CONNECTOR TO REVERSE DRIVE LIGHT 		001 A 12 054 017 38  -
035 BRACKET
FOR CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH 		001 A 18 054 600 43  -
036 BRACKET
FOR CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH 		001 A 18 054 601 43  -
36a GROMMET
AT BRACKET FOR CABLE HARNESS 		002 A 00 099 731 81  -
037 GROMMET
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 18 199 700 81  -
038 GROMMET
FOR MAIN CABLE HARNESS AT FRONT WALL 		002 A 00 099 727 81  -
38a GROMMET
FOR BLINKER LIGHT AT WHEEL ARCH FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 00 099 722 81  -
039 CLIP
FOR MAIN CABLE HARNESS AT FRONT WALL 		005 A 00 098 833 78  -
040 CLIP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 00 098 834 78  -
FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 13 699 500 37  -
LENS-HD. SCREW
AM 4X12 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 13 699 501 35  -
CAGE CLIP WITH NUT
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 00 099 022 91  -
LENS-HD. SCREW
AM 6X15 DIN 7985-4S FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
FIXING CLAMP
FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 A 18 199 500 20  -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 -
FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRAME CROSS MEMBER, FRONT 		002 A 12 199 500 22  -
HEX. -HD.
SHEET METAL SCREW B 6,3X16 DIN 7976 FOR MAIN CABLE HARNESS AT FRAME CROSS MEMBER, FRONT 		002 -
FIXING CLAMP
FOR CABLE FIXING FOOT DIMMER SWITCH AND GROUND CONNECTION 		001 A 15 399 503 22  -
LENS-HD. SHEET
METAL SCREW B 4,8X9,5 DIN 7981 FOR CABLE FIXING FOOT DIMMER SWITCH AND GROUND CONNECTION 		001 -
042 GROMMET
FOR FUEL TRANSMITTER CABLE 		001 A 00 099 717 81  -
CLIP 008 A 00 098 833 78  -
CLIP 005 A 00 098 834 78  -
LENS-HD. SHEET
METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER AT REAR CROSS MEMBER 		001 -
056 FIXING SHACKLE
FOR TAIL LIGHT CABLE, LEFT AND RIGHT IS FIXED TOGETHER WITH MUDGUARD AND WHEEL ARCH 		008 A 12 054 601 82  -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION, TAIL LIGHT 		002 -
LOCK WASHER
B 4 DIN 127 FOR GROUND CONNECTION, TAIL LIGHT 		002 -
HEX. NUT
M 4 DIN 934-5 S FOR GROUND CONNECTION, TAIL LIGHT 		002 -
061 CABLE COVER PLATE
FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		001 A 12 054 600 81  -
LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		002 -
FIXING CLAMP
FOR CABLE HARNESS TO STEERING SPINDLE, TO STARTER MOTOR AND TO REVERSE DRIVE LIGHT AT FRONT WALL 		001 A 13 699 504 20  -
HOSE PIECE,
DIA. 18X20-MM, 20-MM LONG OVER STARTER CABLE AND MAIN CABLE HARNESS
Заменено на: A  000 997 47 82 		- A 18 099 715 82  -
067 HOSE PIECE,
DIA. 18X20-MM, 20-MM LONG OVER STARTER CABLE AND MAIN CABLE HARNESS ORDER BY THE METER 		003 A 00 099 747 82  -
FUSE BOX
WITH FUSE AND BRASS SCREW
Заменено на: A  180 540 09 50 		- A 12 154 009 50  -
071 FUSE BOX
WITH FUSE AND BRASS SCREW 		001 A 18 054 009 50  -
072 COVER 001 A 00 054 502 03  -
073 FUSE, 12 AMP.
8 DIN 72581 		011 -
73a FUSE, 35 AMP.
25 DIN 72581 		001 -
BRACKET, UPPER PART
FOR FUSE BOX
Заменено на: A  180 540 03 73 		- A 18 054 007 73  -
074 BRACKET, UPPER PART
FOR FUSE BOX 		001 A 18 054 003 73  -
BRACKET, LOWER PART
FOR FUSE BOX
Заменено на: A  180 540 04 73 		- A 18 054 502 40  -
BRACKET, LOWER PART
FOR FUSE BOX UP TO CHASSIS 		001 A 18 054 004 73  -
075 BRACKET, LOWER PART
FOR FUSE BOX FROM CHASSIS 		001 A 12 154 505 40  -
LENS-HD. SCREW
AM 6X12 DIN 7985-4 S FOR BRACKET AT BODY FRONT END 		002 -
LOCK WASHER
B 6 DIN 127 FOR BRACKET AT BODY FRONT END 		002 -
LENS-HD. SHEET
METAL SCREW BZ 3,9X19 DIN 7981 FOR BRACKET, UPPER PART AT BRACKET, LOWER PART 		002 -
SPRING NUT
FOR BRACKET, UPPER PART AT BRACKET, LOWER PART 		002 A 00 099 413 45  -

INSTRUMENTS AND SWITCHES 		- XXX XXX XXX XXXX -
PUSH-PULL SWITCH
FOR INSTRUMENT LIGHTING
Заменено на: A  000 545 06 11 		- A 12 054 000 44  -
080 PUSH-PULL SWITCH
FOR INSTRUMENT LIGHTING 		001 A 00 054 506 11  -
081 ESCUTCHEON 001 A 12 054 500 72  -
082 FELT RING 001 A 00 099 720 40  -
083 BUTTON 001 A 12 054 502 37  -
CABLE BRACKET
5X0,3X135 N 286 FOR CAPILLARY TUBE AT HEATING CONNECTION 		001 -
SEALING RING
A 14X18 DIN 7603 A1 FOR TELE-THERMOMETER 		001 -
084 COMBI-INSTRUMENT WITH
KILOMETER GRADUATION, RATIO 0.875 		001 A 12 154 204 01  -
084 COMBI-INSTRUMENT WITH
KILOMETER GRADUATION, RATIO 0.875 SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-15 		001 A 12 154 204 01  -
COMBI-INSTRUMENT WITH
KILOMETER GRADUATION, RATIO 0.875 		001 A 12 154 211 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION, RATIO 1.41 EXPORT 		001 A 12 154 205 01  -
COMBI-INSTRUMENT WITH
KILOMETER GRADUATION, RATIO 0.8075 EXPORT, SPECIAL REQUEST TIRES 6.40-15 		001 A 12 154 212 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION, RATIO 1.3 EXPORT, SPECIAL REQUEST TIRES 6.40-15 		001 A 12 154 213 01  -
COMBI-INSTRUMENT WITH
KILOMETER GRADUATION, RATIO 0.96 SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRE 6.40-13 OR 6.70-13 		001 A 12 154 214 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION, RATIO 1.54 SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRE 6.40-13 OR 6.70-13 		001 A 12 154 215 01  -
KILOMETER COUNTER
Заменено на: A  002 542 14 06 		- A 00 054 269 06  -
085 KILOMETER COUNTER 001 A 00 254 214 06  -
MILEAGE COUNTER
EXPORT 		001 A 00 254 221 06  -
KILOMETER COUNTER
SPECIAL REQUEST FOR TIRES 6.40-15 		001 A 00 254 234 06  -
MILEAGE COUNTER
SPECIAL REQUEST FOR TIRES 6.40-15 		001 A 00 254 235 06  -
KILOMETER COUNTER
SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRE 6.40-13 OR 6.70-13 		001 A 00 254 236 06  -
MILEAGE COUNTER
SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRE 6.40-13 OR 6.70-13 		001 A 00 254 237 06  -
086 OIL PRESSURE GAUGE 001 A 00 054 271 02  -
087
GAUGE (DEGREES C) 		001 A 00 054 287 05  -
088 FUEL GAUGE 001 A 00 054 244 03  -
089 TENSION SPRING
FOR COMBI-INSTRUMENT FIXING 		002 A 12 099 317 10  -
090 RUBBER FRAME
FOR COMBI-INSTRUMENT 		001 A 12 054 202 80  -
091 LAMP SOCKET 005 A 00 054 508 19  -
BULB
H 12 V 2 W DIN 72601 		006 -
100 CLOCK 001 A 12 054 205 11  -
LAMP SOCKET
Заменено на: A  000 545 07 19 		- A 18 354 500 19  -
101 LAMP SOCKET 001 A 00 054 507 19  -
BULB
H 12 V 2 W DIN 72601 		001 -
109 DIMMER RESISTOR
FOR INSTRUMENT LIGHTING 		001 A 00 054 508 31  -
CLIP
FOR HOUSING, UPPER PART WITH LOWER PART, AT GLOVE BOX CASING 		002 A 00 098 834 78  -
113 DISTANCE LIGHT 001 A 00 054 576 24  -
BLINKER LEVER KNOB, BLACK
Заменено на: A  180 545 04 37 		- A 18 054 502 37  -
114 BLINKER LEVER KNOB, BLACK 001 A 18 054 504 37  -
BLINKER LEVER
KNOB, IVORY COLOURED SPECIAL REQUEST 		001 A 18 054 503 37  -
115 COVER PLATE
FOR BLINKER LIGHT SWITCH 		001 A 18 046 200 23  -
LENS-HD. COUNTERSUNK
SCREW AM 4X10 DIN 7988-4 S VERCHROMT FOR COVER PLATE AT JACKET TUBE 		002 -
116 BLINKER TRANSMITTER, 001 A 00 054 423 32  -
HEX. -HD. SCREW
M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER AT BRACKET, FUSE BOX 		002 -
LOCK WASHER
B 6 DIN 127 FOR BLINKER TRANSMITTER AT BRACKET, FUSE BOX 		002 -
CAGE CLIP WITH NUT
FOR BLINKER TRANSMITTER AT BRACKET, FUSE BOX 		002 A 00 099 022 91  -
122 OIL PRESSURE
GAUGE PIPE FOR CONNECTION OF HOSE TO OIL FILTER UP TO CHASSIS 		001 A 18 054 008 60  -
123 OIL PRESSURE
GAUGE PIPE FOR CONNECTION OF OIL PRESSURE GAUGE, COMBI, INSTRUMENT UP TO CHASSIS 		001 A 18 054 006 60  -
OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO HOSE FROM CHASSIS 		001 A 18 054 013 60  -
OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO COUPLING PIECE FROM CHASSIS 		001 A 12 154 003 60  -
COUPLING PIECE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 		001 A 12 854 200 47  -
OIL PRESSURE GAUGE PIPE
FROM COUPLING PIECE TO HOSE FROM CHASSIS 		001 A 12 154 004 60  -
125 LOCK WASHER
B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 		001 -
126 HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 		001 -
SPRING WASHER
A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 		002 -
HEX. NUT
BM 8 DIN 439 - 5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 		001 -
127 RUBBER HOSE, 25 MM LONG
FOR OIL PRESSURE GAUGE PIPE AT BODY, FRONT END ORDER BY THE METER 		NB A 00 098 709 32  -
128 FIXING CLAMP
FOR OIL PRESSURE GAUGE PIPE AT BODY, FRONT END 		002 A 13 699 505 01  -
LENS-HD. SHEET
METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT BODY, FRONT END 		002 -
FIXING CLAMP
FOR OIL PRESSURE GAUGE PIPE, CAPILLARY PIPE AND GLOW PLUG CABLE 		002 A 18 199 500 20  -
LENS-HD. SHEET
METAL SCREW B 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE, CAPILLARY PIPE AND GLOW PLUG CABLE 		001 -
HOSE
FOR OIL PRESSURE GAUGE PIPE
Заменено на: A  121 540 01 59 		- A 12 154 000 59  -
130 HOSE
FOR OIL PRESSURE GAUGE PIPE 		001 A 12 154 001 59  -
130 HOSE
FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 		- A 12 154 001 59  -
HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 		001 A 12 154 002 59  -
RUBBER HOSE
FOR UNION NUT TO OIL PRESSURE GAUGE PIPE WAS NOT INSTALLED 		- A 12 099 708 82  -
GROMMET
FOR CAPILLARY PIPE
Заменено на: A  186 997 06 81 		- A 18 699 705 81  -
GROMMET
FOR CAPILLARY PIPE 		001 A 18 699 706 81  -
131 STOP LIGHT SWITCH
SEE ALSO GROUP 42 		001 A 00 054 522 09  -
132 FOOT DIMMER SWITCH 001 A 00 054 512 12  -
133 INSULATING PLATE
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		001 A 13 654 501 58  -
LENS-HD. COUNTERSUNK
SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002 -
135 CAGE CLIP WITH NUT
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002 A 00 099 025 91  -
136 GROMMET
FOR CABLE TO FOOT DIMMER SWITCH 		001 A 00 099 727 81  -
137 SPEEDOMETER CABLE
1, 750 MM LONG 		001 A 12 054 203 07  -
139 FIXING CLAMP, LEFT
FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT 		001 A 12 099 500 01  -
LENS-HD. SCREW
AM 5X10 DIN 7985-4 S FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT 		002 -
WASHER
FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT 		001 A 12 099 031 40  -
LOCK WASHER
B 5 DIN 127 FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT 		002 -
CLIP
FOR SPEEDOMETER CABLE AT PEDAL FLOOR, RIGHT 		002 A 00 098 834 78  -
141 GROMMET
FOR SPEEDOMETER CABLE THROUGH FORK SUPPORT 		002 A 18 099 712 81  -
141 GROMMET
FOR SPEEDOMETER CABLE THROUGH FORK SUPPORT 		001 A 18 099 712 81  -
142 GROMMET
FOR LOCKING 3RD FORK SUPPORT PASSAGE 		001 A 18 098 700 44  -

Заменено на: A  001 542 20 20 		- A 00 154 206 20  -
HORN
Заменено на: A  001 542 20 20 		- A 00 154 207 20  -
150 HORN 001 A 00 154 220 20  -
HORN
SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE 		001 A 00 054 271 20  -
HEX. -HD. SCREW
M 10X28 DIN 931-8 G FOR HORN AT BRACKET 		001 -
LOCK WASHER
B 10 DIN 127 FOR HORN AT BRACKET 		001 -
HEX. NUT
M 10 DIN 934-5 S FOR HORN AT BRACKET 		001 -
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTION AT HORN 		002 -
CYLINDRICAL SCREW
AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT HORN 		002 -
151 THREE-ELEMENT, VOLTAGE
REGULATOR FOR GENERATOR SEE ALSO GROUP 15 		001 A 00 015 455 06  -
152 RUBBER BUSHING 003 A 00 015 402 50  -
LENS-HD. SCREW
AM 6X20 DIN 7985-4 S FOR GOVERNOR AT BRACKET, WHEEL ARCH PAN 		003 -
LOCK WASHER
B 6 DIN 127 FOR GOVERNOR AT BRACKET, WHEEL ARCH PAN 		003 -
CABLE HARNESS
FOR CABLE FROM GENERATOR TO VOLTAGE REGULATOR
Заменено на: A  180 540 00 08 		- A 12 054 003 08  -
153 CABLE HARNESS
FOR CABLE FROM GENERATOR TO VOLTAGE REGULATOR 		001 A 18 054 000 08  -
154 GROMMET
FOR CABLE FROM GENERATOR TO VOLTAGE REGULATOR 		003 A 00 099 707 81  -
155 RUBBER PROTECTIVE CAP
FOR CABLE HARNESS AT GENERATOR 		002 A 00 054 602 35  -
156 TUBE CLAMP
FOR CABLE HARNESS AT GENERATOR 		001 A 18 199 500 20  -
AUXILIARY CABLE HARNESS
SPECIAL REQUEST FOG LIGHTS FOR CARS EXPORTED TO THE USA 		001 A 12 154 017 09  -
FUSE BOX, 2 POLE
SPECIAL REQUEST FOG LIGHTS FOR CARS EXPORTED TO THE USA 		001 A 00 054 503 01  -
CYLINDRICAL SCREW
AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRESH-AIR DUCT, LEFT SPECIAL REQUEST FOG LIGHTS FOR CARS EXPORTED TO THE USA 		001 -
CONTACTOR, 12 VOLT
SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL 		001 A 00 054 227 19  -
ELECTRICAL CABLE,
BLACK 80-MM LONG B 1 DIN 72551 FROM RELAY, TERMINAL 30, TO RELAY, TERMINAL 86 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR 		001 -
CABLE TERMINAL
4 X 0,8 N 261 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL 		005 -
GROMMET
SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL 		005 A 00 099 701 81  -

GLOW STARTING SWITCH 		- XXX XXX XXX XXXX -
160 GLOW STARTING SWITCH 001 A 00 054 513 17  -
161 PIN WITH HEAD
4 F8X16X13, 7 DIN 1434 FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 -
162 COTTER PIN
1 X 8 DIN 94 FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 -
163 BRACKET
FOR WIRE CABLE 		001 A 12 154 001 73  -
164 LEVER
FOR GLOW STARTING SWITCH 		001 A 12 154 500 22  -
165 BUTTON 001 A 12 154 501 37  -
CLIP
FOR FIXING OF CABLE AT BRACKET 		001 A 00 098 834 78  -
CYLINDRICAL SCREW
AM 4X15 DIN 84-4 S FOR FIXING OF WIRE CABLE AT BRACKET 		001 -
WASHER
B 4,3 DIN 9021 FOR FIXING OF WIRE CABLE AT BRACKET 		002 -
LOCK WASHER
B 4 DIN 127 FOR FIXING OF WIRE CABLE AT BRACKET 		001 -
HEX. NUT
M 4 DIN 934-5 S FOR FIXING OF WIRE CABLE AT BRACKET 		001 -
170 PIN WITH HEAD
4 F8 X 25 X 22, 7 DIN 1434 FOR FIXING OF LEVER AT BRACKET 		001 -
171 WASHER
4,3 DIN 125 FOR FIXING OF LEVER AT BRACKET 		001 -
172 COTTER PIN
1 X 8 DIN 94 FOR FIXING OF LEVER AT BRACKET 		001 -
175 GLOW STARTING
SWITCH WITHOUT WIRE CABLE 		001 A 12 154 005 57  -
GLOW STARTING SWITCH
Заменено на: A  136 545 02 17 		- A 13 654 004 57  -
176 GLOW STARTING SWITCH 001 A 13 654 502 17  -
OCTAGONAL NUT 001 A 00 099 022 51  -
177 SWITCH HANDLE
FOR GLOW STARTING SWITCH 		001 A 12 054 011 83  -
178 LEVER
FOR WIRE CABLE OPERATION 		001 A 12 154 000 84  -
TOOTHED WASHER
J 6,4 DIN 6797 FOR FIXING PIN 		001 -
179 WASHER
FOR FIXING PIN 		002 A 12 054 500 76  -
LOCK WASHER
B 6 DIN 127 FOR FIXING PIN 		001 -
HEX. NUT
M 6 DIN 934-5 S FOR FIXING PIN 		001 -
180 PRESSURE SPRING
FOR GUIDE SLEEVE, STOP SPRING 		001 A 19 199 301 01  -
BALL
6 MM III DIN 5401 FOR GUIDE SLEEVE, STOP SPRING 		001 -
HEX. -HD. SCREW
M 5X28 DIN 931-8 G FOR LEVER AT SHIFTING SHAFT 		001 -
WASHER
5,3 DIN 433 FOR LEVER AT SHIFTING SHAFT 		001 -
HEX. NUT
M 5 DIN 934-5 S FOR LEVER AT SHIFTING SHAFT 		001 -
CYLINDRICAL PIN
4 M6 X 16 DIN 7 FOR SHIFTING SHAFT AT GLOW STARTING SWITCH 		001 -
HEX. -HD. SCREW
M 5X15 DIN 933-8 G FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 -
181 SPACER RING
FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 A 13 654 500 52  -
WASHER
5,3 DIN 433 FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 -
LOCK WASHER
B 5 DIN 127 FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 -
HEX. NUT
M 5 DIN 934-5 S FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 -
WASHER
5,3 DIN 433 FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 -
COTTER PIN
1,5 X 12 DIN 94 FOR WIRE CABLE AT GLOW STARTING SWITCH 		001 -
190 GROMMET 001 A 00 099 724 81  -
191 FIXING CLAMP 001 A 12 199 505 35  -
CYLINDRICAL SCREW
AM 5X12 DIN 84-5 S FOR WIRE CABLE AT ANGLE, INJECTION PUMP 		001 -
LOCK WASHER
B 5 DIN 127 FOR WIRE CABLE AT ANGLE, INJECTION PUMP 		001 -
HEX. NUT
M 5 DIN 934-5 S FOR WIRE CABLE AT ANGLE, INJECTION PURNP 		001 -
HEX. -HD. SCREW
M 6X15 DIN 933-8 G FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM 		003 -
WASHER
A 6,4 DIN 9021 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM 		001 -
WASHER
6,4 DIN 433 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM 		002 -
LOCK WASHER
B 6 DIN 127 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM 		003 -
195 RELEASE SPRING 001 A 12 099 315 10  -
CLIP
FOR WIRE CABLE AT INSTRUMENT PANEL 		001 A 00 098 833 78  -
RUBBER WASHER
ABOVE WIRE CABLE GLOW STARTING SWITCH 		002 A 00 098 721 40  -
196 GLOW CONTROL
OPTIONAL 		001 A 00 054 519 20  -
GLOW CONTROL
OPTIONAL 		001 A 00 054 524 20  -
197 RESISTOR
OPTIONAL 		001 A 00 054 532 18  -
GLOW PLUG RESISTOR
OPTIONAL 		001 A 00 054 522 18  -
SOCKET WITHOUT HAND LIGHT
Заменено на: A  000 545 13 25 		- A 00 054 505 25  -
SOCKET WITHOUT HAND LIGHT
SPECIAL REQUEST 		001 A 00 054 513 25  -
ELECTRICAL CABLE,
BLACK, 1,000-MM LONG A 1 DIN 72551 ORDER BY THE METER SPECIAL REQUEST 		001 -
INSULATING HOSE,
BLACK, 950-MM LONG B 3X3,8 DIN 40621 ORDER BY THE METER SPECIAL REQUEST 		001 -
BRACKET FOR SOCKET
SPECIAL REQUEST 		001 A 12 054 511 95  -
CYLINDRICAL SCREW
AM 5X10 DIN 84-4 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
LOCK WASHER
B 5 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
HEX. NUT
M 5 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
Для того чтобы узнать где купить деталь или аналог, кликните по номеру детали.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA