TRANSMISSION

EPC / Mercedes / 1 / FG / FG 120.011 / 26 / 013
‹ ›

№- Наименование К* Номер детали A

TRANSMISSION 		- XXX XXX XXX XXXX -
001 TRANSMISSION
WITHOUT CLUTCH HOUSING WITH CLUTCH RELEASE BEARING AND RELEASE FORK 		001 A 12 026 029 01  -
TRANSMISSION
WITHOUT CLUTCH HOUSING WITH CLUTCH RELEASE BEARING AND RELEASE FORK 		001 A 12 026 030 01  -

TRANSMISSION HOUSING 		- XXX XXX XXX XXXX -
002 TRANSMISSION HOUSING 001 A 18 626 000 11  -
003 CYLINDRICAL PIN
6 H 8X16 DIN 7 		002 -

TRANSMISSION GEARS 		- XXX XXX XXX XXXX -
005 REVERSE GEAR, 17 TEETH 001 A 12 026 003 25  -
006 BUSHING 001 A 12 026 303 50  -
007 REVERSE GEAR SHAFT 001 A 18 626 300 30  -
008 THREADED PIN
WITH HARDENED PIVOT M 10X45 DIN 417-5 S FOR REVERSE GEAR SHAFT AT TRANSMISSION HOUSING 		001 -
009 HEX. NUT
M 10 DIN 934-5 S FOR REVERSE GEAR SHAFT AT TRANSMISSION HOUSING 		001 -
010 INTERMEDIATE LEVER
FOR REVERSE GEAR 		001 A 13 626 000 37  -
011 DOWEL PIN
8X16 N 37 B 		- -
012 SHIFT DOG
FOR REVERSE GEAR 		001 A 13 626 300 23  -
013 COUNTERSHAFT 001 A 12 026 001 24  -
014 KEY
FOR COUNTERSHAFT 		001 A 18 699 103 68  -
COUNTERSHAFT GEAR,
27 TEETH FOR 3RD GEAR
Заменено на: A  120 263 03 13 		- A 12 026 300 13  -
015 COUNTERSHAFT GEAR,
27 TEETH FOR 3RD GEAR 		001 A 12 026 303 13  -
COUNTERSHAFT GEAR,
32 TEETH FOR 4TH GEAR
Заменено на: A  120 263 09 10 		- A 12 026 306 10  -
016 COUNTERSHAFT GEAR,
32 TEETH FOR 4TH GEAR 		001 A 12 026 309 10  -
017 CIRCLIP
35X2 DIN 471 		001 -
018 ANNULAR GROOVED BEARING
6305 C 3 DIN 625 ON COUNTERSHAFT 		002 -
SHIM, 0.10 MM THICK
FOR ANNULAR GROOVED BEARING ON COUNTERSHAFT, REAR OPTIONAL 		NB A 12 026 314 52  -
019 SHIM, 0.25 MM THICK
FOR ANNULAR GROOVED BEARING ON COUNTERSHAFT, REAR OPTIONAL 		NB A 12 026 315 52  -
SHIM, 0.50 MM THICK
FOR ANNULAR GROOVED BEARING ON COUNTERSHAFT, REAR OPTIONAL 		NB A 12 026 316 52  -
SHIM, 1.00 MM THICK
FOR ANNULAR GROOVED BEARING ON COUNTERSHAFT, REAR OPTIONAL 		NB A 12 026 308 52  -
020 PROTECTIVE PLATE
AT ANNULAR GROOVED BEARING, REAR 		001 A 18 699 018 40  -
021 DRIVE SHAFT
WITH SYNCHRONIZING CONE 		001 A 12 126 000 20  -
024 OIL SLINGER RING
ON DRIVE SHAFT 		001 A 18 626 200 66  -
025 ANNULAR GROOVED
BEARING WITH COVER PLATE 6306 ZN DIN 625 		001 -
026 SNAP RING 001 A 13 626 200 94  -
027 SPACER RING
FOR BEARING, DRIVE SHAFT 		001 A 18 626 204 51  -
028 SNAP RING, 2.00 MM THICK
FOR DRIVE SHAFT AT TRANSMISSION HOUSING OPTIONAL 		001 A 13 699 409 35  -
SNAP RING, 1.90 MM THICK
FOR DRIVE SHAFT AT TRANSMISSION HOUSING OPTIONAL 		001 A 13 699 406 35  -
SNAP RING, 2.05 MM THICK
FOR DRIVE SHAFT AT TRANSMISSION HOUSING OPTIONAL 		001 A 13 699 407 35  -
029 SHIM, 0.1 MM THICK
FOR BEARING, DRIVE SHAFT OPTIONAL 		NB A 13 626 206 52  -
SHIM, 0.2 MM THICK
FOR BEARING, DRIVE SHAFT OPTIONAL 		NB A 13 626 207 52  -
SHIM, 0.3 MM THICK
FOR BEARING, DRIVE SHAFT OPTIONAL 		NB A 13 626 208 52  -

MAIN SHAFT 		- XXX XXX XXX XXXX -
030 MAIN SHAFT 001 A 18 026 200 05  -
031 HELICAL GEAR
FOR 3RD GEAR 		001 A 12 126 002 44  -
NEEDLE BEARING
FOR 3RD GEAR
Заменено на: A  000 981 29 12 		- A 00 098 128 12  -
31a NEEDLE BEARING
FOR 3RD GEAR 		001 A 00 098 129 12  -
032 SYNCHRONIZING RING
FOR 3RD GEAR AND 4TH GEAR 		002 A 18 626 207 36  -
033 GUARD PLATE
FOR 3RD GEAR 		001 A 12 026 223 62  -
034 SYNCHRONIZER BODY
FOR 3RD GEAR AND 4TH GEAR 		001 A 12 026 004 45  -
035 SYNCHRONIZER BODY 001 A 12 026 208 35  -
REPLACED BY 180 993 41 01
ONLY EXCHANGEABLE IN SETS UP TO TRANSMISSION NO. 8502942
Заменено на: A  180 993 41 01 		- A 12 099 314 01  -
PRESSURE SPRING
ONLY EXCHANGEABLE IN SETS UP TO TRANSMISSION NO. 8502942
Заменено на: A  180 993 41 01 		- A 18 099 338 01  -
036 PRESSURE SPRING
FROM TRANSMISSION NO. 8502943 		003 A 18 099 341 01  -
037 STEEL BALL
6, 5 MM III DIN 5401 		003 -
FOLLOWER
Заменено на: A  121 262 00 40 		- A 19 426 200 40  -
038 FOLLOWER 003 A 12 126 200 40  -

Заменено на: A  198 262 01 23 		- A 12 026 209 23  -

Заменено на: A  198 262 01 23 		- A 12 026 215 23  -
SLIDING SLEEVE
Заменено на: A  198 262 01 23 		- A 19 826 200 23  -
039 SLIDING SLEEVE 001 A 19 826 201 23  -
040 LOCKING PLATE
FOR MAIN SHAFT, FRONT 		001 A 12 099 401 15  -
041 GROOVED NUT
FOR MAIN SHAFT, FRONT 		001 A 12 026 203 26  -
042 ROLLER CAGE
OPTIONAL 		001 A 00 098 108 12  -
ROLLER CAGE
OPTIONAL 		001 A 00 098 109 12  -
043 ROLLER CAGE, DIVIDED 001 A 12 098 103 12  -
HELICAL GEAR, 24 TEETH
FOR 2ND GEAR
Заменено на: A  120 262 10 12 		- A 12 026 207 12  -
044 HELICAL GEAR, 24 TEETH
FOR 2ND GEAR 		001 A 12 026 210 12  -
045 BUTTING RING,
7.90-MM THICK OPTIONAL 		001 A 12 026 216 62  -
BUTTING RING,
7.95-MM THICK OPTIONAL 		001 A 12 026 217 62  -
BUTTING RING,
8.00-MM THICK OPTIONAL 		001 A 12 026 218 62  -
BUTTING RING,
8.05-MM THICK OPTIONAL 		001 A 12 026 219 62  -
BUTTING RING,
8.1-MM THICK OPTIONAL 		001 A 12 026 220 62  -
046 SYNCHRONIZING RING
FOR 2ND GEAR 		001 A 18 626 207 36  -
46a SYNCHRONIZING RING
FOR 1ST GEAR 		001 A 18 626 214 36  -
047 SYNCHRONIZER BODY
FOR 1ST AND 2ND GEAR 		001 A 12 026 002 45  -
048 SYNCHRONIZER BODY 001 A 12 026 205 35  -
REPLACED BY 180 993 41 01
ONLY EXCHANGEABLE IN SETS UP TO TRANSMISSION NO. 8502942
Заменено на: A  180 993 41 01 		- A 12 099 314 01  -
PRESSURE SPRING
ONLY EXCHANGEABLE IN SETS UP TO TRANSMISSION NO. 8502942
Заменено на: A  180 993 41 01 		- A 18 099 338 01  -
049 PRESSURE SPRING
FROM TRANSMISSION NO. 8502943 		003 A 18 099 341 01  -
050 STEEL BALL
6, 5 MM III DIN 5401 		003 -
FOLLOWER
Заменено на: A  121 262 00 40 		- A 19 426 200 40  -
051 FOLLOWER 003 A 12 126 200 40  -
SLIDING SLEEVE
Заменено на: A  120 262 14 23 		- A 12 026 208 23  -
052 SLIDING SLEEVE 001 A 12 026 214 23  -
053 KEY
FOR MAIN SHAFT 		001 A 12 026 200 81  -
054 GUARD PLATE,
4.40-MM THICK OPTIONAL WITH 120 262 14 62/15 62 		001 A 12 026 211 62  -
GUARD PLATE,
4.45-MM THICK OPTIONAL WITH 120 262 14 62/15 62 		001 A 12 026 212 62  -
GUARD PLATE,
4.50-MM THICK OPTIONAL WITH 120 262 14 62/15 62 		001 A 12 026 213 62  -
GUARD PLATE,
4.55-MM THICK OPTIONAL WITH 120 262 11 62/12 62/13 62 		001 A 12 026 214 62  -
GUARD PLATE,
4.60-MM THICK OPTIONAL WITH 120 262 11 62/12 62/13 62 		001 A 12 026 215 62  -
055 ROLLER CAGE
FOR 1ST GEAR 		001 A 12 098 102 12  -
HELICAL GEAR, 28 TEETH
FOR 1ST GEAR
Заменено на: A  120 262 10 11 		- A 12 026 207 11  -
056 HELICAL GEAR, 28 TEETH
FOR 1ST GEAR 		001 A 12 026 210 11  -
057 GUARD PLATE, 3.8 MM THICK
OPTIONAL 		NB A 18 626 201 62  -
GUARD PLATE, 3.9 MM THICK
OPTIONAL 		NB A 18 626 202 62  -
GUARD PLATE, 4.0 MM THICK
OPTIONAL 		NB A 18 626 203 62  -
GUARD PLATE, 4.1 MM THICK
OPTIONAL 		NB A 18 626 204 62  -
GUARD PLATE, 4.2 MM THICK
OPTIONAL 		NB A 18 626 205 62  -
GUARD PLATE, 4.3 MM THICK
OPTIONAL 		NB A 18 626 206 62  -
GUARD PLATE, 4.4 MM THICK
OPTIONAL 		NB A 18 626 207 62  -
GUARD PLATE, 4.5 MM THICK
OPTIONAL 		NB A 18 626 208 62  -
058 ANNULAR GROOVED BEARING
ON MAIN SHAFT 		001 A 13 698 102 25  -
059 SNAP RING
SP 72 A DIN 5417 		001 -
060 SHIM, 0.1 MM THICK
ON MAIN SHAFT TO REAR TRANSMISSION HOUSING COVER OPTIONAL 		NB A 13 626 204 52  -
SHIM, 0.2 MM THICK
ON MAIN SHAFT TO REAR TRANSMISSION HOUSING COVER OPTIONAL 		NB A 13 626 205 52  -
SHIM, 0.3 MM THICK
ON MAIN SHAFT TO REAR TRANSMISSION HOUSING COVER OPTIONAL 		NB A 13 626 209 52  -
061 HELICAL GEAR
FOR SPEEDOMETER DRIVE 		001 A 12 026 408 30  -
062 TRANSMISSION HOUSING
COVER, FRONT 		001 A 12 126 000 21  -
TRANSMISSION HOUSING
COVER, FRONT 		001 A 18 026 000 21  -
063 SEALING RING 001 A 18 626 100 60  -
064 BALL PIN
FOR RELEASE FORK 		001 A 12 099 103 15  -
065 HEX. HEAD SCREW
M 8X25 DIN 931-8 G FOR TRANSMISSION HOUSING COVER AT TRANSMISSION HOUSING 		002 -
066 HEX. HEAD SCREW
M 8X22 DIN 933-8 G FOR TRANSMISSION HOUSING COVER AT TRANSMISSION HOUSING 		004 -
067 SPRING WASHER
B 8 DIN 137 FOR TRANSMISSION HOUSING COVER AT TRANSMISSION HOUSING 		006 -
068 TRANSMISSION HOUSING
COVER, REAR 		001 A 12 026 020 16  -
069 PLUG 001 A 15 326 400 55  -
070 GASKET
FOR TRANSMISSION HOUSING COVER, REAR 		001 A 18 626 104 79  -
071 SEALING RING
FOR MAIN SHAFT 		001 A 00 099 717 46  -
072 SEALING RING
FOR SPEEDOMETER DRIVE 		001 A 12 026 100 80  -
073 SHAFT
FOR SPEEDOMETER DRIVE 		001 A 12 026 404 32  -
074 DRIVE GEAR
FOR SPEEDOMETER DRIVE 		001 A 12 026 402 31  -
075 SPRING WASHER
B 6 DIN 137 FOR FLEXIBLE SHAFT AT TRANSMISSION HOUSING COVER, REAR 		001 -
076 HEX. HEAD SCREW
M 6X30 DIN 931-8 G FOR FLEXIBLE SHAFT AT TRANSMISSION HOUSING COVER, REAR 		001 -
077 HEX. HEAD SCREW
M 8X22 DIN 933-8 G FOR TRANSMISSION HOUSING COVER, REAR AT TRANSMISSION HOUSING 		002 -
078 SPRING WASHER
B 8 DIN 137 FOR TRANSMISSION HOUSING COVER, REAR AT TRANSMISSION HOUSING 		006 -
079 COLLAR SCREW
FOR TRANSMISSION HOUSING COVER, REAR AT TRANSMISSION HOUSING 		004 A 12 099 000 10  -
080 THREE-ARM FLANGE
ON MAIN SHAFT 		001 A 18 626 208 45  -
081 LOCK
FOR THREE ARM FLANGE AT MAIN SHAFT 		001 A 18 626 201 73  -
082 GROOVED NUT
FOR THREE ARM FLANGE AT MAIN SHAFT 		001 A 18 626 202 26  -
083 SCREW PLUG
FOR FILLING-IN OIL TRANSMISSION 		001 A 18 699 700 32  -
084 SCREW PLUG WITH COLLAR
FOR OIL DRAIN, TRANSMISSION 		001 A 18 699 701 32  -
84a SEALING RING
A 24X30 DIN 7603 AL FOR OIL DRAIN, TRANSMISSION 		001 -
085 HEX. HEAD SCREW
M 10X40 DIN 931-8 G FOR TRANSMISSION AT CYLINDER CRANKCASE 		005 -
088 SPRING WASHER
B 10 DIN 137 FOR TRANSMISSION AT CYLINDER CRANKCASE 		004 -
089 WASHER
10, 5 DIN 125 FOR TRANSMISSION AT CYLINDER CRANKCASE 		001 -
090 LOCK WASHER
B 10 DIN 127 FOR TRANSMISSION AT CYLINDER CRANKCASE 		001 -
091 HEX. NUT
M 10 DIN 934 - 5 S FOR TRANSMISSION AT CYLINDER CRANKCASE 		001 -
Для того чтобы узнать где купить деталь или аналог, кликните по номеру детали.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA