| №- | Наименование | К* | Номер детали | A |
|---|---|---|---|---|
| REPLACED BY 120 350 44 00 TOGETHER WITH 1 RELEASE SPRING 180 993 14 10 1 BRACKET 120 420 02 86 WITH RIGHT-HAND DRIVE THE MOUNTED COM |
- | A 12 035 015 00 | - | |
| REPLACED BY 120 350 44 00 TOGETHER WITH 1 RELEASE SPRING 180 993 14 10 1 BRACKET 120 420 02 86 WITH RIGHT-HAND DRIVE THE MOUNTED COM |
- | A 12 035 016 00 | - | |
| 001 | REAR AXLE, WITH THRUST ARM, ADJUSTABLE HAND BRAKE CABLE AND BETTER BRAKE SEALING RATIO 1 : 3.89; WITH RIGHT-HAND DRIVE THE MOUNTED |
001 | A 12 035 044 00 | - |
| REPLACED BY 120 350 48 00 TOGETHER WITH 1 BRACKET, LEFT 180 427 05 41 1 BRACKET, RIGHT 180 427 06 41 1 BRACKET (FOR RELEASE SPRING) |
- | A 12 035 005 00 | - | |
| REPLACED BY 120 350 48 00 TOGETHER WITH 1 RELEASE SPRING 180 993 14 10 1 BRACKET 120 420 02 86 WITH RIGHT-HAND DRIVE THE MOUNTED COM |
- | A 12 035 022 00 | - | |
| REPLACED BY 120 350 48 00 TOGETHER WITH 1 RELEASE SPRING 180 993 14 10 1 BRACKET 120 420 02 86 WITH RIGHT-HAND DRIVE THE MOUNTED COM |
- | A 12 035 023 00 | - | |
| REAR AXLE, WITH THRUST ARM, ADJUSTABLE HAND BRAKE CABLE AND BETTER BRAKE SEALING RATIO 1 : 4.11 WITH RIGHT-HAND DRIVE THE MOUNTED C |
001 | A 12 035 048 00 | - | |
| REAR AXLE HOUSING, WITHOUT REAR AXLE SHAFTS, REAR AXLE TUBES AND UNIVERSAL JOINT RATIO 1 : 3.89 AND UP TO REAR AXLE NO. 55 05400, |
001 | A 12 035 010 00 | - | |
REAR AXLE HOUSING |
- | XXX XXX XXX XXXX | - | |
| 002 | REAR AXLE HOUSING WITH MOUNTING UP TO CHASSIS NO. 45 02773 THE FOLLOWING PARTS HAVE TO BE DELIVERED 1 RUBBER RING 120 351 03 86 1 |
001 | A 12 035 011 20 | - |
| REPLACED BY 120 350 03 21 TOGETHER WITH 2 LOCKING PLATE 120 351 00 73 UP TO REAR AXLE NO.45 05288 |
- | A 12 035 001 21 | - | |
| 003 | MOUNTING, RIGHT FROM REAR AXLE NO.45 05289 |
001 | A 12 035 003 21 | - |
| 004 | STUD BOLT FOR MOUNTING AT REAR AXLE HOUSING |
004 | A 12 099 002 05 | - |
| 005 | LOCKING PLATE FOR MOUNTING AT REAR AXLE HOUSING FROM REAR AXLE NO. 45 05289 |
002 | A 12 035 100 73 | - |
| WASHER 10,5 DIN 125 FOR MOUNTING AT REAR AXLE HOUSING UP TO REAR AXLE NO.45 05288 |
004 | - | ||
| CASTLE NUT M 10 DIN 935-5 S FOR MOUNTING AT REAR AXLE HOUSING UP TO REAR AXLE NO.45 05288 |
004 | - | ||
| 006 | HEX.NUT M 10 DIN 934-5 S FOR MOUNTING AT REAR AXLE HOUSING FROM REAR AXLE NO.45 05289 |
004 | - | |
| COTTER PIN 2X22 DIN 94 FOR MOUNTING AT REAR AXLE HOUSING UP TO REAR AXLE NO.45 05288 |
004 | - | ||
| 008 | WASHER 7,4 DIN 125 FOR MOUNTING AT REAR AXLE HOUSING |
003 | - | |
| 009 | HEX.-HD.SCREW M 7X32 DIN 931-8 G FOR MOUNTING AT REAR AXLE HOUSING |
003 | - | |
| 010 | STUD BOLT FOR REAR AXLE HOUSING SUSPENSION |
001 | A 12 099 003 05 | - |
| STUD BOLT FOR REAR AXLE HOUSING SUSPENSION ONLY FOR REPAIRS |
001 | A 12 099 005 05 | - | |
| STUD BOLT FOR REAR AXLE HOUSING SUSPENSION ONLY FOR REPAIRS |
001 | A 12 099 006 05 | - | |
| 011 | FLANGE WITH MOUNTING | 001 | A 12 035 003 18 | - |
| REPLACED BY 120 350 04 21 TOGETHER WITH 2 LOCKING PLATE 120 351 00 73 UP TO REAR AXLE NO. 45 05288 |
- | A 12 035 002 21 | - | |
| 012 | MOUNTING, LEFT FROM REAR AXLE NO. 45 05289 |
001 | A 12 035 004 21 | - |
| 013 | STUD BOLT FOR MOUNTING AT FLANGE |
004 | A 12 099 002 05 | - |
| 014 | LOCKING PLATE FOR MOUNTING AT FLANGE FROM REAR AXLE NO. 45 05289 |
002 | A 12 035 100 73 | - |
| WASHER 10, 5 DIN 125 FOR MOUNTING AT FLANGE UP TO REAR AXLE NO.45 05288 |
004 | - | ||
| CASTLE NUT M 10 DIN 935-5 S FOR MOUNTING AT FLANGE UP TO REAR AXLE NO.45 05288 |
004 | - | ||
| COTTER PIN 2X22 DIN 94 FOR MOUNTING AT FLANGE UP TO REAR AXLE NO.45 05288 |
004 | - | ||
| 015 | HEX.NUT M 10 DIN 934-5 S FOR MOUNTING AT FLANGE FROM REAR AXLE NO. 45 05289 |
004 | - | |
| 017 | WASHER 7,4 DIN 125 FOR MOUNTING AT FLANGE |
003 | - | |
| 018 | HEX.-HD.SCREW M 7X32 DIN 931-8 G FOR MOUNTING AT FLANGE |
003 | - | |
| 019 | HEX.-HD.SCREW M 10X22 DIN 933-8 G FOR MOUNTING AT REAR AXLE HOUSING |
004 | - | |
| 020 | HEX.-HD.SCREW M 7X18 DIN 933-8 G FOR MOUNTING AT REAR AXLE HOUSING |
004 | - | |
| 021 | LOCKING SCREW FOR OIL FILLING AND OIL DRAINING |
002 | A 18 699 700 32 | - |
| 022 | BREATHER | 001 | A 12 035 000 90 | - |
DIFFERENTIAL GEAR |
- | XXX XXX XXX XXXX | - | |
| 023 | DIFFERENTIAL GEAR; RATIO 1: 3.89 |
001 | A 12 035 005 23 | - |
| DIFFERENTIAL GEAR; RATIO 1 : 4.11 FOR TIRES 6.40-15 |
001 | A 12 035 004 23 | - | |
| 024 | DIFFERENTIAL HOUSING | 001 | A 12 035 303 01 | - |
| 025 | GUARD PLATE 1.3 MM THICK OPTIONAL |
002 | A 12 035 305 62 | - |
| GUARD PLATE 1.4 MM THICK OPTIONAL |
002 | A 12 035 306 62 | - | |
| GUARD PLATE 1.5 MM THICK OPTIONAL |
002 | A 12 035 307 62 | - | |
| GUARD PLATE 1.6 MM THICK OPTIONAL |
002 | A 12 035 308 62 | - | |
| GUARD PLATE 1.7 MM THICK OPTIONAL |
002 | A 12 035 309 62 | - | |
| 026 | REAR AXLE SIDE GEAR 14 TEETH |
002 | A 12 035 302 15 | - |
| 027 | SPIDER GEAR 10 TEETH | 002 | A 12 035 301 14 | - |
| 028 | SPH. WASHER 1.0 MM THICK FOR SPIDER GEAR |
002 | A 18 035 300 24 | - |
| 029 | DIFFERENTIAL PIN FOR SPIDER GEAR |
001 | A 12 035 301 21 | - |
| 030 | LOCKING PIN FOR DIFFERENTIAL PIN |
001 | A 13 635 302 74 | - |
| 031 | DRIVE PINION WITH RING GEAR; RATIO 1 : 3,89 |
001 | A 12 035 007 39 | - |
| DRIVE PINION WITH RING GEAR; RATIO 1 : 4,11 FOR TIRES 6,40-15 |
001 | A 12 035 006 39 | - | |
| 032 | LOCKING PLATE FOR RING GEAR AT DIFFERENTIAL HOUSING |
008 | A 12 099 400 10 | - |
| 033 | HEX.-HD.SCREW FOR RING GEAR AT DIFFERENTIAL HOUSING |
008 | A 18 399 001 01 | - |
| 034 | TAPERED ROLLER BEARING | 002 | A 00 099 101 05 | - |
| 035 | THREADED RING FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
002 | A 12 035 302 25 | - |
| 036 | LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
002 | A 18 335 300 73 | - |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
002 | A 18 335 301 73 | - | |
| 037 | LOCKING PLATE FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
002 | A 13 635 302 73 | - |
| 038 | HEX.-HD.SCREW M 6X12 DIN 933-8 G FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
004 | - | |
BEARING ASSEMBLY, DRIVE PINION |
- | XXX XXX XXX XXXX | - | |
| 040 | CYLINDR. ROLLER BEARING | 001 | A 00 098 106 25 | - |
| 041 | SPACER SLEEVE | 001 | A 12 035 301 40 | - |
| 042 | PRESSURE RING | 001 | A 18 035 301 48 | - |
| 043 | ANGULAR CONTACT BEARING 3307 X DIN 628 |
001 | - | |
| 044 | SHOULDER RING | 001 | A 12 035 301 63 | - |
| 045 | COVER PLATE FOR SEALING RING |
001 | A 12 035 302 08 | - |
| 046 | SEALING RING 35 X 55 X 12/16 |
001 | A 00 099 713 46 | - |
| 047 | FLANGE FOR DRIVE PINION |
001 | A 12 035 000 45 | - |
| 048 | GROOVED NUT FOR DRIVE PINION |
001 | A 12 035 000 66 | - |
| 049 | LOCK FOR DRIVE PINION |
001 | A 12 099 400 44 | - |
| 050 | SNAP RING, REAR | 001 | A 12 099 402 35 | - |
| 051 | SNAP RING, FRONT 80 DIN 9045 |
001 | - | |
| 052 | ADJUSTING SCREW FOR PRESSURE RING |
002 | A 18 335 101 70 | - |
| 053 | LOCKING PLATE 15 DIN 93 FOR ADJUSTING SCREW |
002 | - | |
| 054 | HEX.NUT M 14X1,5 DIN 936-5 S FOR ADJUSTING SCREW |
002 | - | |
| 055 | SHIM 1.00 MM THICK OPTIONAL |
001 | A 12 035 324 52 | - |
| SHIM 1.10 MM THICK OPTIONAL |
001 | A 12 035 326 52 | - | |
| SHIM 1.20 MM THICK OPTIONAL |
001 | A 12 035 328 52 | - | |
| SHIM 1.30 MM THICK OPTIONAL |
001 | A 12 035 330 52 | - | |
| SHIM 1.40 MM THICK OPTIONAL |
001 | A 12 035 332 52 | - | |
| SHIM 1.50 MM THICK OPTIONAL |
001 | A 12 035 334 52 | - | |
| SHIM 1.60 MM THICK OPTIONAL |
001 | A 12 035 336 52 | - | |
| SHIM 1.70 MM THICK OPTIONAL |
001 | A 12 035 338 52 | - | |
| SHIM 1.80 MM THICK OPTIONAL |
001 | A 12 035 340 52 | - | |
| SHIM 1.90 MM THICK OPTIONAL |
001 | A 12 035 342 52 | - | |
| SHIM 2.00 MM THICK OPTIONAL |
001 | A 12 035 344 52 | - | |
| SHIM 2.05 MM THICK OPTIONAL |
001 | A 12 035 345 52 | - | |
| 056 | LOCK WASHER B 7 DIN 127 FOR COVER PLATE, SEALING RING, FRONT AT REAR AXLE HOUSING |
006 | - | |
| 057 | HEX.-HD.SCREW M 7X20 DIN 933-8 G FOR COVER PLATE, SEALING RING, FRONT AT REAR AXLE HOUSING |
006 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy