TRANSMISSION SHAFTS AND GEARS

EPC / Mercedes / Bus / GM / GM 712.625 / 26 / 150
‹ ›

№- Nazwa I* Numer części
007 DRIVE SHAFT
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 262 19 02 		- A 694 262 00 02
007 DRIVE SHAFT
FRONT
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 19 02
007 DRIVE SHAFT
FRONT
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 19 02
007 DRIVE SHAFT
FRONT
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 20 02
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 2.90 MM 		001 A 001 990 01 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 2.90 MM 		001 A 001 990 01 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 2.95 MM
TO BE ORDERED ONLY FROM MBB 		001 A 001 990 00 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.00 MM 		001 A 000 990 99 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.00 MM 		001 A 000 990 99 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.05 MM
TO BE ORDERED ONLY FROM MBB 		001 A 000 990 98 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.10 MM 		001 A 000 990 97 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.10 MM 		001 A 000 990 97 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.10 MM 		001 A 000 990 97 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.15 MM
TO BE ORDERED ONLY FROM MBB 		001 A 000 990 96 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.20 MM 		001 A 000 990 95 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.20 MM 		001 A 000 990 95 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.25 MM
TO BE ORDERED ONLY FROM MBB 		001 A 000 990 94 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.30 MM 		001 A 000 990 93 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.30 MM 		001 A 000 990 93 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.35 MM
TO BE ORDERED ONLY FROM MBB 		001 A 000 990 92 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.40 MM 		001 A 000 990 91 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.40 MM 		001 A 000 990 91 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.45 MM
TO BE ORDERED ONLY FROM MBB 		001 A 000 990 90 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.45 MM
TO BE ORDERED ONLY FROM MBB 		001 A 000 990 90 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.50 MM 		001 A 970 990 02 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.50 MM 		001 A 970 990 02 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.55 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 990 03 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.60 MM 		001 A 970 990 04 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.60 MM 		001 A 970 990 04 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.65 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 990 05 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.70 MM 		001 A 970 990 06 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.70 MM 		001 A 970 990 06 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.75 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 990 07 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.80 MM 		001 A 970 990 08 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.80 MM 		001 A 970 990 08 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.85 MM
TO BE ORDERED ONLY FROM MBB 		001 A 000 990 89 82
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.90 MM 		001 A 970 262 11 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.90 MM 		001 A 970 262 11 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 3.95 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 31 52
014 COMPENSATING DISC
DRIVE SHAFT;AS REQUIRED 4.00 MM 		001 A 970 262 12 52
014 COMPENSATING DISC
DRIVE SHAFT;AS REQUIRED 4.00 MM 		001 A 970 262 12 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.05 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 23 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.10 MM 		001 A 970 262 13 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.10 MM 		001 A 970 262 13 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.15 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 24 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.20 MM 		001 A 970 262 14 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.20 MM 		001 A 970 262 14 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.25 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 25 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.30 MM 		001 A 970 262 15 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.30 MM 		001 A 970 262 15 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.35 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 26 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.40 MM 		001 A 970 262 16 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.40 MM 		001 A 970 262 16 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.45 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 32 52
014 COMPENSATING DISC
DRIVE SHAFT;AS REQUIRED 4.50 MM 		001 A 970 262 17 52
014 COMPENSATING DISC
DRIVE SHAFT;AS REQUIRED 4.50 MM 		001 A 970 262 17 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.55 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 33 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.60 MM 		001 A 970 262 18 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.60 MM 		001 A 970 262 18 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.65 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 34 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.70 MM 		001 A 970 262 19 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.70 MM 		001 A 970 262 19 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.75 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 35 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.80 MM 		001 A 970 262 20 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.85 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 36 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.90 MM 		001 A 970 262 21 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.90 MM 		001 A 970 262 21 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 4.95 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 37 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 5.00 MM 		001 A 970 262 22 52
014 SPACER WASHER
DRIVE SHAFT;AS REQUIRED 5.00 MM 		001 A 970 262 22 52
020 MAIN SHAFT 001 A 970 262 04 05
020 MAIN SHAFT 001 A 970 262 04 05
020 MAIN SHAFT 001 A 970 262 10 05
023 NEEDLE BEARING
2ND SPEED GEAR 		001 A 018 981 96 10
023 NEEDLE BEARING
2ND SPEED GEAR 		001 A 018 981 96 10
023 NEEDLE BEARING
2ND SPEED GEAR 		001 A 018 981 58 10
023 NEEDLE BEARING
2ND SPEED GEAR 		001 A 018 981 58 10
023 NEEDLE CAGE
2ND SPEED GEAR 		001 A 023 981 38 10
032 GEAR
2ND SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 695 262 00 12
032 GEAR
2ND SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 10 12
032 GEAR
2ND SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 10 12
032 GEAR
2ND SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 16 12
032 GEAR
2ND SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 695 262 01 12
038 SYNCHRONIZER CONE
1ST AND 2ND SPEED 		002 A 970 262 38 37
038 SYNCHRONIZER CONE
1ST AND 2ND SPEED 		002 A 970 262 38 37
044 SYNCHRONIZER CONE
1ST AND 2ND SPEED 		002 A 970 262 02 37
044 SYNCHRONIZER CONE
1ST AND 2ND SPEED 		002 A 970 262 34 37
044 SYNCHRONIZER CONE
1ST AND 2ND SPEED 		002 A 970 262 34 37
044 SYNCHRONIZER CONE
1ST AND 2ND SPEED 		002 A 970 262 02 37
047 SYNCHRONIZER RING
1ST SPEED GEAR
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 694 262 02 34
050 SYNCHRONIZER RING
1ST AND 2ND SPEED 		002 A 970 262 30 34
050 SYNCHRONIZER RING
1ST AND 2ND SPEED 		002 A 970 262 30 34
059 SYNCHRONIZER RING
1ST SPEED GEAR
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 17 34
062 SYNCHRONIZER RING
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 262 23 34 		- A 694 262 03 34
062 SYNCHRONIZER RING
2ND SPEED GEAR
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 23 34
062 SYNCHRONIZER RING
2ND SPEED GEAR
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 23 34
068 SYNCHRONIZER BODY
1ST AND 2ND SPEED
Zastąpiono przez: A 970 262 24 35 		001 A 694 262 02 35
068 SYNCHRONIZER BODY
1ST AND 2ND SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 970 262 24 35
068 SYNCHRONIZER BODY
1ST AND 2ND SPEED 		001 A 970 262 24 35
068 CONSTANT VELOCITY UNIT
1ST AND 2ND SPEED 		001 A 693 262 00 35
074 SLIDING COLLAR
1ST AND 2ND SPEED
Zastąpiono przez: A 970 262 33 23 		001 A 694 262 00 23
074 SLIDING COLLAR
1ST AND 2ND SPEED 		001 A 970 262 33 23
074 SLIDING COLLAR
1ST AND 2ND SPEED 		001 A 970 262 33 23
074 SLIDING SLEEVE
1ST AND 2ND SPEED 		001 A 970 262 37 23
077 SPRING
SLIDING COLLAR
TO BE ORDERED ONLY FROM MBB 		003 A 970 993 64 01
077 SPRING
SLIDING COLLAR
Zastąpiono przez: A 970 993 64 01 		003 A 970 993 46 01
077 SPRING
SLIDING COLLAR 		003 A 970 993 64 01
077 SPRING
SLIDING COLLAR
TO BE ORDERED ONLY FROM MBB 		003 A 970 993 64 01
080 PIN
SLIDING COLLAR 		003 A 970 262 02 74
080 PIN
SLIDING COLLAR 		003 A 970 262 02 74
083 LOCK
GEAR; AS REQUIRED 2.19 MM 		001 A 010 994 58 41
083 LOCK
GEAR; AS REQUIRED 2.19 MM 		001 A 010 994 58 41
083 LOCK
GEAR; AS REQUIRED 2.24 MM 		001 A 010 994 59 41
083 LOCK
GEAR; AS REQUIRED 2.24 MM 		001 A 010 994 59 41
083 LOCK
GEAR; AS REQUIRED 2.29 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 994 44 41
083 LOCK
GEAR; AS REQUIRED 2.34 MM 		001 A 970 994 10 41
083 LOCK
GEAR; AS REQUIRED 2.34 MM 		001 A 970 994 10 41
083 LOCK
Zastąpiono przez: A 970 994 11 41 		- A 970 994 44 41
083 LOCK
GEAR; AS REQUIRED 2.39 MM 		001 A 970 994 11 41
083 LOCK
GEAR; AS REQUIRED 2.39 MM 		001 A 970 994 11 41
083 LOCK
GEAR; AS REQUIRED 2.44 MM 		001 A 970 994 12 41
083 LOCK
GEAR; AS REQUIRED 2.44 MM 		001 A 970 994 12 41
083 RETAINING RING
SYNCHRONIZER BODY TO MAIN SHAFT 2.50 MM 		001 N 000471 078000
083 RETAINING RING
SYNCHRONIZER BODY TO MAIN SHAFT 2.50 MM 		001 N 000471 078000
086 NEEDLE BEARING
1ST SPEED GEAR 		001 A 017 981 50 10
086 NEEDLE BEARING
1ST SPEED GEAR 		001 A 017 981 50 10
086 NEEDLE BEARING
1ST SPEED GEAR 		001 A 018 981 53 10
086 NEEDLE BEARING
1ST SPEED GEAR 		001 A 018 981 53 10
086 NEEDLE BEARING
1ST SPEED GEAR 		001 A 017 981 51 10
086 NEEDLE BEARING
1ST SPEED GEAR 		001 A 017 981 62 10
092 GEAR
1ST SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 03 11
092 GEAR
1ST SPEED 		001 A 970 262 05 11
092 GEAR
1ST SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 695 262 00 11
092 GEAR
1ST SPEED
TO BE ORDERED ONLY FROM MBB 		001 A 976 262 14 11
092 GEAR
1ST SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 260 03 44
092 IDLER GEAR
1ST SPEED 		001 A 970 260 36 44
098 SYNCHRONIZER BODY
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 262 08 35 		- A 694 262 00 35
098 SYNCHRONIZER BODY
REVERSE SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 08 35
098 SYNCHRONIZER BODY
REVERSE SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 08 35
098 CONSTANT VELOCITY UNIT
REVERSE SPEED 		001 A 693 262 01 35
101 SNAP RING
REVERSE SPEED;AS REQUIRED 1.88 MM 		001 A 970 262 01 94
101 SNAP RING
REVERSE SPEED;AS REQUIRED 1.88 MM 		001 A 970 262 01 94
101 SNAP RING
REVERSE SPEED;AS REQUIRED 1.92 MM 		001 A 970 262 02 94
101 SNAP RING
REVERSE SPEED;AS REQUIRED 1.92 MM 		001 A 970 262 02 94
101 SNAP RING
REVERSE SPEED;AS REQUIRED 1.96 MM 		001 A 970 262 03 94
101 SNAP RING
REVERSE SPEED;AS REQUIRED 1.96 MM 		001 A 970 262 03 94
101 SNAP RING
REVERSE SPEED;AS REQUIRED 2.00 MM 		001 A 970 262 04 94
101 SNAP RING
REVERSE SPEED;AS REQUIRED 2.00 MM 		001 A 970 262 04 94
101 SNAP RING
REVERSE SPEED;AS REQUIRED 2.04 MM 		001 A 970 994 00 40
101 SNAP RING
REVERSE SPEED;AS REQUIRED 2.08 MM 		001 A 970 994 01 40
110 NEEDLE CAGE
REVERSE SPEED GEAR 		001 A 019 981 53 10
110 NEEDLE CAGE
REVERSE SPEED GEAR 		001 A 019 981 53 10
110 NEEDLE CAGE
REVERSE SPEED GEAR 		001 A 023 981 85 10
110 NEEDLE BEARING
REVERSE SPEED GEAR 		001 A 019 981 57 10
110 NEEDLE BEARING
REVERSE SPEED GEAR 		001 A 023 981 29 10
110 NEEDLE BEARING
REVERSE SPEED GEAR
TO BE ORDERED ONLY FROM MBB 		001 A 023 981 29 10
116 DOG CLUTCH GEAR
REVERSE SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 695 262 02 33
116 DOG CLUTCH GEAR
REVERSE SPEED 		001 A 695 262 01 33
116 DOG CLUTCH GEAR
REVERSE SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 04 33
116 DOG CLUTCH GEAR
REVERSE SPEED 		001 A 970 262 05 33
116 REVERSE GEAR
REVERSE SPEED 		001 A 693 262 00 33
128 NEEDLE BEARING
3RD SPEED GEAR 		001 A 018 981 96 10
128 NEEDLE BEARING
3RD SPEED GEAR 		001 A 018 981 96 10
128 NEEDLE BEARING
3RD SPEED GEAR 		001 A 018 981 58 10
128 NEEDLE BEARING
3RD SPEED GEAR 		001 A 018 981 58 10
128 NEEDLE CAGE
3RD SPEED GEAR 		001 A 023 981 38 10
134 IDLER GEAR 3RD GEAR
3RD SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 694 262 00 13
134 GEAR
3RD SPEED 		001 A 970 262 11 13
134 GEAR
3RD SPEED 		001 A 970 262 11 13
134 GEAR
3RD SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 12 13
134 IDLER GEAR 3RD GEAR
3RD SPEED 		001 A 693 262 00 13
134 GEAR
3RD SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 12 13
140 SYNCHRONIZER CONE
3RD AND 4TH SPEED 140 MM 		002 A 970 262 39 37
140 SYNCHRONIZER CONE
3RD AND 4TH SPEED 140 MM 		002 A 970 262 39 37
146 SYNCHRONIZER CONE
3RD AND 4TH SPEED 133 MM 		002 A 970 262 19 37
146 SYNCHRONIZER CONE
3RD AND 4TH SPEED 133 MM 		002 A 970 262 19 37
146 SYNCHRONIZER CONE
3RD AND 4TH SPEED 133 MM 		002 A 970 262 35 37
146 SYNCHRONIZER CONE
3RD AND 4TH SPEED 133 MM 		002 A 970 262 35 37
152 SYNCHRONIZER RING
3RD SPEED 		001 A 970 262 25 34
152 SYNCHRONIZER RING
3RD SPEED 		001 A 974 262 00 34
152 SYNCHRONIZER RING
3RD SPEED 		001 A 976 262 29 34
152 SYNCHRONIZER RING
3RD SPEED 		001 A 976 262 34 34
158 SYNCHRONIZER RING
4TH SPEED 		001 A 970 262 24 34
158 SYNCHRONIZER RING
4TH SPEED 		001 A 973 262 01 34
158 SYNCHRONIZER RING
4TH SPEED 		001 A 976 262 30 34
158 SYNCHRONIZER RING
4TH SPEED 		001 A 692 262 00 34
158 SYNCHRONIZER RING
4TH SPEED 		001 A 976 262 32 34
164 SYNCHRONIZER RING
3RD AND 4TH SPEED 		002 A 970 262 31 34
164 SYNCHRONIZER RING
3RD AND 4TH SPEED 		002 A 970 262 31 34
170 SYNCHRONIZER BODY
3RD AND 4TH SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 694 262 03 35
170 SYNCHRONIZER BODY
3RD AND 4TH SPEED
TO BE ORDERED ONLY FROM MBB 		001 A 974 262 00 35
170 SYNCHRONIZER BODY
3RD AND 4TH SPEED 		001 A 970 262 25 35
170 CONSTANT VELOCITY UNIT
3RD AND 4TH SPEED 		001 A 692 262 00 35
176 SLIDING COLLAR
3RD AND 4TH SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 694 262 01 23
176 SLIDING COLLAR
3RD AND 4TH SPEED
TO BE ORDERED ONLY FROM MBB 		001 A 975 262 00 23
176 SLIDING COLLAR
3RD AND 4TH SPEED 		001 A 970 262 34 23
176 SLIDING SLEEVE
3RD AND 4TH SPEED 		001 A 970 262 38 23
176 SLIDING SLEEVE
3RD AND 4TH SPEED 		001 A 693 262 01 23
176 SLIDING SLEEVE
3RD AND 4TH SPEED 		001 A 970 262 43 23
179 SPRING
SLIDING COLLAR
Zastąpiono przez: A 970 993 64 01 		003 A 970 993 46 01
179 SPRING
SLIDING COLLAR 		003 A 970 993 64 01
179 SPRING
SLIDING COLLAR
TO BE ORDERED ONLY FROM MBB 		003 A 970 993 64 01
179 SPRING
SLIDING COLLAR
TO BE ORDERED ONLY FROM MBB 		003 A 970 993 64 01
182 PIN
SLIDING COLLAR 		003 A 970 262 02 74
182 PIN
SLIDING COLLAR 		003 A 970 262 02 74
188 LOCK
GEAR; AS REQUIRED 2.19 MM 		001 A 010 994 58 41
188 LOCK
GEAR; AS REQUIRED 2.19 MM 		001 A 010 994 58 41
188 LOCK
GEAR; AS REQUIRED 2.24 MM 		001 A 010 994 59 41
188 LOCK
GEAR; AS REQUIRED 2.24 MM 		001 A 010 994 59 41
188 LOCK
GEAR; AS REQUIRED 2.29 MM
TO BE ORDERED ONLY FROM MBB 		001 A 970 994 44 41
188 LOCK
GEAR; AS REQUIRED 2.34 MM 		001 A 970 994 10 41
188 LOCK
GEAR; AS REQUIRED 2.34 MM 		001 A 970 994 10 41
188 LOCK
Zastąpiono przez: A 970 994 11 41 		- A 970 994 44 41
188 LOCK
GEAR; AS REQUIRED 2.39 MM 		001 A 970 994 11 41
188 LOCK
GEAR; AS REQUIRED 2.39 MM 		001 A 970 994 11 41
188 LOCK
GEAR; AS REQUIRED 2.44 MM 		001 A 970 994 12 41
188 LOCK
GEAR; AS REQUIRED 2.44 MM 		001 A 970 994 12 41
188 RETAINING RING
GEAR; AS REQUIRED 2.50 MM 		001 N 000471 078000
188 RETAINING RING
GEAR; AS REQUIRED 2.50 MM 		001 N 000471 078000
194 NEEDLE BEARING
4TH SPEED GEAR 		001 A 018 981 95 10
194 NEEDLE BEARING
4TH SPEED GEAR 		001 A 018 981 95 10
194 NEEDLE BEARING
4TH SPEED GEAR 		001 A 017 981 56 10
194 NEEDLE BEARING
4TH SPEED GEAR 		001 A 017 981 56 10
194 NEEDLE CAGE
4TH SPEED GEAR 		001 A 023 981 82 10
200 GEAR
4TH SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 695 262 00 14
200 GEAR
4TH SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 11 14
200 GEAR
4TH SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 11 14
200 GEAR
4TH SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 12 14
200 IDLER GEAR 4TH GEAR
4TH SPEED 		001 A 693 262 00 14
206 SPACER WASHER
4TH SPEED GEAR 		001 A 970 262 01 62
206 SPACER WASHER
4TH SPEED GEAR 		001 A 970 262 01 62
206 THRUST WASHER
4TH SPEED GEAR
TO BE ORDERED ONLY FROM MBB 		001 A 694 262 00 62
206 THRUST WASHER
4TH SPEED GEAR 		001 A 695 262 00 62
212 SNAP RING
MAINSHAFT; AS REQUIRED 3.15 MM/D 56.4 MM 		001 A 970 262 17 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 3.15 MM/D 56.4 MM 		001 A 970 262 17 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 3.10 MM/D 56.4 MM 		001 A 970 262 16 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 3.10 MM/D 56.4 MM 		001 A 970 262 16 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 3.05 MM/D 56.4 MM 		001 A 970 262 15 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 3.05 MM/D 56.4 MM 		001 A 970 262 15 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 3.00 MM/D 56.4 MM 		001 A 970 262 06 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 3.00 MM/D 56.4 MM 		001 A 970 262 06 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 2.96 MM/D 56.4 MM 		001 A 970 262 07 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 2.96 MM/D 56.4 MM 		001 A 970 262 07 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 2.92 MM/D 56.4 MM 		001 A 970 262 08 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 2.88 MM/D 56.4 MM 		001 A 970 262 09 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 2.88 MM/D 56.4 MM 		001 A 970 262 09 94
212 SNAP RING
MAINSHAFT; AS REQUIRED 2.84 MM/D 56.4 MM 		001 A 970 994 03 40
212 SNAP RING
MAINSHAFT; AS REQUIRED 2.80 MM/D 56.4 MM 		001 A 970 994 02 40
215 NEEDLE BEARING
5TH SPEED GEAR 		001 A 014 981 06 10
215 NEEDLE BEARING
5TH SPEED GEAR 		001 A 014 981 06 10
215 NEEDLE BEARING
5TH SPEED GEAR 		001 A 018 981 97 10
215 NEEDLE BEARING
5TH SPEED GEAR 		001 A 017 981 63 10
215 NEEDLE BEARING
5TH SPEED GEAR 		001 A 018 981 55 10
215 NEEDLE BEARING
5TH SPEED GEAR 		001 A 018 981 97 10
217 GEAR
5TH SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 694 262 01 15
217 GEAR
5TH SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 260 19 44
230 SYNCHRONIZER CONE
Zastąpiono przez: A 970 262 30 37 		- A 970 262 15 37
230 SYNCHRONIZER CONE
5TH AND 6TH SPEED 		002 A 970 262 30 37
230 SYNCHRONIZER CONE
5TH AND 6TH SPEED 		002 A 970 262 30 37
236 SYNCHRONIZER RING
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 262 15 34 		- A 694 262 01 34
236 SYNCHRONIZER RING
CONSTANT GEAR 		001 A 970 262 15 34
236 SYNCHRONIZER RING
CONSTANT GEAR 		001 A 970 262 15 34
236 SYNCHRONIZER RING
CONSTANT GEAR 		001 A 693 262 05 34
242 SYNCHRONIZER RING
5TH SPEED
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB 		001 A 694 262 00 34
248 SYNCHRONIZER BODY
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 262 15 35 		- A 694 262 01 35
248 SYNCHRONIZER BODY
5TH AND 6TH SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 15 35
248 SYNCHRONIZER BODY
5TH AND 6TH SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 15 35
248 SYNCHRONIZER BODY
5TH AND 6TH SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 12 35
254 SLIDING COLLAR
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 262 29 23 		- A 694 262 02 23
254 SLIDING COLLAR
5TH AND 6TH SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 29 23
254 SLIDING SLEEVE
5TH AND 6TH SPEED 		001 A 972 262 20 23
254 SLIDING COLLAR
5TH AND 6TH SPEED
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 262 29 23
257 SPRING
SLIDING COLLAR 		003 A 970 993 64 01
257 SPRING
SLIDING COLLAR
Zastąpiono przez: A 970 993 64 01 		003 A 970 993 46 01
257 SPRING
SLIDING COLLAR 		003 A 970 993 64 01
257 SPRING
SLIDING COLLAR
TO BE ORDERED ONLY FROM MBB 		003 A 970 993 64 01
260 PIN
SLIDING COLLAR 		003 A 970 262 02 74
260 PIN
SLIDING COLLAR 		003 A 970 262 02 74
263 ROLLER ASSEMBLY
Zastąpiono przez: A 002 981 63 12 		- A 002 981 60 12
263 ROLLER ASSEMBLY
TOOTHED GEAR, FIFTH AND SEXTH GEARS
Zastąpiono przez: A 976 981 00 12 		001 A 002 981 63 12
263 ROLLER ASSEMBLY
TOOTHED GEAR, FIFTH AND SEXTH GEARS 		001 A 976 981 00 12
263 ROLLER ASSEMBLY
TOOTHED GEAR, FIFTH AND SEXTH GEARS 		001 A 976 981 00 12
272 SNAP RING
GEAR; AS REQUIRED 1.79 MM 		001 A 970 262 25 94
272 SNAP RING
GEAR; AS REQUIRED 1.79 MM 		001 A 970 262 25 94
272 SNAP RING
GEAR; AS REQUIRED 1.84 MM 		001 A 970 262 11 94
272 SNAP RING
GEAR; AS REQUIRED 1.84 MM 		001 A 970 262 11 94
272 SNAP RING
GEAR; AS REQUIRED 1.89 MM 		001 A 970 262 12 94
272 SNAP RING
GEAR; AS REQUIRED 1.89 MM 		001 A 970 262 12 94
272 SNAP RING
GEAR; AS REQUIRED 1.94 MM 		001 A 970 262 13 94
272 SNAP RING
GEAR; AS REQUIRED 1.94 MM 		001 A 970 262 13 94
272 SNAP RING
GEAR; AS REQUIRED 2.00 MM 		001 A 970 262 14 94
272 SNAP RING
GEAR; AS REQUIRED 2.00 MM 		001 A 970 262 14 94
275 PULSE STAR
(PULSE PLATE),P.T.O.SHAFT SPEED 		001 A 970 262 01 28
278 SEAL RING
MAIN SHAFT,REAR 		001 A 024 997 04 47
278 SEAL RING
MAIN SHAFT,REAR
TO BE ORDERED ONLY FROM MBB 		001 A 020 997 72 47
278 SEAL RING
MAIN SHAFT,REAR
TO BE ORDERED ONLY FROM MBB 		001 A 020 997 91 47
278 SEAL RING
MAIN SHAFT,REAR
TO BE ORDERED ONLY FROM MBB 		001 A 024 997 27 47
278 SEAL RING
MAIN SHAFT,REAR 		001 A 024 997 32 47
284 FLANGE
(COUPLING FLANGE) 		001 A 970 262 10 45
284 FLANGE
(COUPLING FLANGE) 		001 A 970 262 11 45
290 FLANGE
(COUPLING FLANGE) 		001 A 970 262 14 45
293 HEXAGON HEAD BOLT
COUPLING FLANGE TO DRIVE SHAFT M 16X60 		001 N 910105 016005
293 HEXAGON HEAD BOLT
COUPLING FLANGE TO DRIVE SHAFT M 16X60 		001 N 910105 016005
293 HEXAGON HEAD BOLT
COUPLING FLANGE TO DRIVE SHAFT M16X1.5X60 		001 N 000000 006511
296 THRUST WASHER
COUPLING FLANGE TO DRIVE SHAFT 		001 A 383 282 02 62
296 THRUST WASHER
COUPLING FLANGE TO DRIVE SHAFT 		001 A 383 282 02 62
296 THRUST WASHER
COUPLING FLANGE TO DRIVE SHAFT 		001 A 383 282 02 62
302 COUNTERSHAFT
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 263 07 02 		- A 694 263 00 02
302 COUNTERSHAFT
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 263 07 02
302 COUNTERSHAFT
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 263 07 02
302 COUNTERSHAFT
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 694 263 00 02
302 COUNTERSHAFT
TO BE ORDERED ONLY FROM MBB 		001 A 975 263 01 02
308 GEAR
Z=38 / Z=33
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 263 07 13 		- A 694 263 00 13
308 GEAR
3RD AND 4TH SPEED Z=38 / Z=33
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 263 07 13
308 GEAR
3RD AND 4TH SPEED Z=38 / Z=33
NOT VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM DB-AG 		001 A 970 263 07 13
308 GEAR
3RD AND 4TH SPEED Z=38 / Z=33
TO BE ORDERED ONLY FROM MBB 		001 A 970 263 06 13
311 GEAR
Zastąpiono przez: A 970 263 06 15 		- A 694 263 00 15
311 GEAR
5TH SPEED 		001 A 970 263 06 15
311 GEAR
5TH SPEED 		001 A 970 263 06 15
311 GEAR
5TH SPEED 		001 A 970 263 05 15
320 GEAR
Zastąpiono przez: A 970 263 06 10 		- A 694 263 00 10
320 GEAR
CONSTANT; COUNTERSHAFT 		001 A 970 263 06 10
323 GEAR
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 976 263 11 10 		- A 695 263 00 10
323 GEAR
CONSTANT; COUNTERSHAFT 		001 A 970 263 04 10
323 GEAR
CONSTANT; COUNTERSHAFT 		001 A 970 263 06 10
326 INNER RING
COUNTERSHAFT,REAR 		001 A 970 981 00 81
326 INNER RING
COUNTERSHAFT,REAR 		001 A 970 981 00 81
329 ROLLER ASSEMBLY
COUNTERSHAFT,REAR 		001 A 002 981 75 12
329 CYLINDRICAL BEARING
COUNTERSHAFT,REAR 		001 A 010 981 84 01
329 ROLLER ASSEMBLY
COUNTERSHAFT,REAR 		001 A 002 981 75 12
329 CYLINDRICAL BEARING
COUNTERSHAFT,REAR 		001 A 010 981 84 01
329 CYLINDR. ROLLER BEARING
COUNTERSHAFT,REAR 		001 A 010 981 49 01
329 CYLINDR. ROLLER BEARING
COUNTERSHAFT,REAR 		001 A 010 981 49 01
332 SNAP RING
COUNTERSHAFT,REAR 		001 N 912009 037100
332 SNAP RING
COUNTERSHAFT,REAR 		001 N 912009 037100
347 REVERSE IDLER SHAFT
Zastąpiono przez: A 970 263 02 30 		- A 694 263 00 30
347 REVERSE IDLER SHAFT
Zastąpiono przez: A 694 263 00 30 		001 A 970 263 02 30
347 REVERSE IDLER SHAFT 001 A 694 263 00 30
353 REVERSE IDLER GEAR
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 263 03 31 		- A 694 263 00 31
353 REVERSE IDLER GEAR
ONLY VALID IN LATIN AMERICA
TO BE ORDERED ONLY FROM MBB
Zastąpiono przez: A 970 263 03 31 		- A 694 263 00 31
353 REVERSE IDLER GEAR
Zastąpiono przez: A 970 263 03 31 		- A 694 263 01 31
353 REVERSE IDLER GEAR
Zastąpiono przez: A 970 263 03 31 		- A 694 263 01 31
353 REVERSE IDLER GEAR
TO BE ORDERED ONLY FROM MBB
ONLY VALID IN LATIN AMERICA 		001 A 694 263 00 31
353 REVERSE IDLER GEAR
TO BE ORDERED ONLY FROM MBB
ONLY VALID IN LATIN AMERICA 		001 A 694 263 00 31
353 REVERSE IDLER GEAR 001 A 970 263 03 31
353 REVERSE IDLER GEAR 001 A 970 263 03 31
362 NEEDLE BEARING
REVERSE IDLER GEAR 		001 A 017 981 60 10
362 NEEDLE BEARING
REVERSE IDLER GEAR 		001 A 017 981 60 10
362 NEEDLE BEARING
REVERSE IDLER GEAR 		001 A 017 981 61 10
362 NEEDLE BEARING
REVERSE IDLER GEAR 		001 A 017 981 61 10
362 NEEDLE BEARING
REVERSE IDLER GEAR 		001 A 018 981 57 10
362 NEEDLE BEARING
REVERSE IDLER GEAR 		001 A 018 981 57 10
365 RETAINING RING
REVERSE SLIDING GEAR 32X1.5 		001 N 900055 032310
365 RETAINING RING
REVERSE SLIDING GEAR 32X1.5 		001 N 900055 032310
Aby dowiedzieć się, gdzie kupić przedmiot lub jego odpowiednika, kliknij na numerze katalogowym.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA