| №- | Nazwa | I* | Numer części | A |
|---|---|---|---|---|
CYLINDER HEAD |
- | XXX XXX XXX XXXX | - | |
| CYLINDER HEAD WITH VALVES AND CAMSHAFT NO LONGER SUPPLIED |
- | A 12 101 012 20 | - | |
| CYLINDER HEAD WITH VALVES AND CAMSHAFT NO LONGER SUPPLIED |
- | A 12 101 031 20 | - | |
| CYLINDER HEAD WITH VALVES AND CAMSHAFT NO LONGER SUPPLIED |
- | A 12 101 048 20 | - | |
| CYLINDER HEAD WITH VALVES AND CAMSHAFT NO LONGER SUPPLIED |
- | A 12 101 086 20 | - | |
| REPLACED BY 121 010 99 20 TOGETHER WITH 1 CYLINDER HEAD GASKET 121 016 23 20 OR 121 016 26 20, RESP. 1 SET OF CAMSHAFT BEARINGS 121 |
- | A 12 101 013 20 | - | |
| REPLACED BY 121 010 99 20 TOGETHER WITH 1 CYLINDER HEAD GASKET 121 016 23 20 OR 121 016 26 20, RESP. 1 SET OF CAMSHAFT BEARINGS 121 |
- | A 12 101 032 20 | - | |
| REPLACED BY 121 010 99 20 TOGETHER WITH 1 CYLINDER HEAD GASKET 121 016 23 20 OR 121 016 26 20, RESP. 1 SET OF CAMSHAFT BEARINGS 121 |
- | A 12 101 027 20 | - | |
| CYLINDER HEAD WITH CAMSHAFT BEARINGS, STUDS AND VALVE GUIDES NO LONGER SUPPLIED |
- | A 12 101 042 20 | - | |
| CYLINDER HEAD WITH CAMSHAFT BEARINGS, STUDS AND VALVE GUIDES NO LONGER SUPPLIED |
- | A 12 101 059 20 | - | |
| CYLINDER HEAD WITH CAMSHAFT BEARINGS, STUDS AND VALVE GUIDES NO LONGER SUPPLIED |
- | A 12 101 096 20 | - | |
| 001 | CYLINDER HEAD WITH STUDS AND VALVE GUIDES (COMPRESSION RATIO 8.7:1) |
001 | A 12 101 005 21 | - |
| 002 | SCREW PLUG TO PLUG CORE HOLES |
002 | A 00 099 717 30 | - |
| 003 | SEAL RING A 26X32 DIN 7603 A1 TO PLUG CORE HOLES |
002 | - | |
Zastąpiono przez: A 121 053 05 31 |
- | A 12 105 300 31 | - | |
Zastąpiono przez: A 121 053 05 31 |
- | A 12 105 301 31 | - | |
| VALVE SEAT RING STANDARD FOR INTAKE Zastąpiono przez: A 121 053 05 31 |
- | A 12 105 302 31 | - | |
| 004 | VALVE SEAT RING STANDARD FOR INTAKE |
004 | A 12 105 305 31 | - |
| VALVE SEAT RING, O.D.; 1.2-MM OVERSIZE FOR INTAKE Zastąpiono przez: A 121 053 06 31 |
- | A 12 105 303 31 | - | |
| VALVE SEAT RING, O.D.; 1.2-MM OVERSIZE FOR INTAKE FOR REPAIRS |
004 | A 12 105 306 31 | - | |
Zastąpiono przez: A 121 053 05 32 |
- | A 12 105 300 32 | - | |
Zastąpiono przez: A 121 053 05 32 |
- | A 12 105 301 32 | - | |
| VALVE SEAT RING STANDARD FOR EXHAUST Zastąpiono przez: A 121 053 05 32 |
- | A 12 105 302 32 | - | |
| 005 | VALVE SEAT RING STANDARD FOR EXHAUST |
004 | A 12 105 305 32 | - |
| VALVE SEAT RING, O.D.; 1.2-MM OVERSIZE FOR EXHAUST Zastąpiono przez: A 121 053 06 32 |
- | A 12 105 303 32 | - | |
| VALVE SEAT RING, O.D.; 1.2-MM OVERSIZE FOR EXHAUST FOR REPAIRS |
004 | A 12 105 306 32 | - | |
| WATER DISTRIBUTOR Zastąpiono przez: A 121 016 09 60 |
- | A 12 101 600 60 | - | |
| 006 | WATER DISTRIBUTOR | 004 | A 12 101 609 60 | - |
| WATER DISTRIBUTOR Zastąpiono przez: A 121 016 07 60 |
- | A 62 001 600 60 | - | |
| 007 | WATER DISTRIBUTOR | 004 | A 12 101 607 60 | - |
| WATER DISTRIBUTOR Zastąpiono przez: A 121 016 06 60 |
- | A 12 101 605 60 | - | |
| 008 | WATER DISTRIBUTOR | 002 | A 12 101 606 60 | - |
Zastąpiono przez: A 121 016 08 60 |
- | A 62 101 611 60 | - | |
| WATER DISTRIBUTOR Zastąpiono przez: A 121 016 08 60 |
- | A 62 101 613 60 | - | |
| 009 | WATER DISTRIBUTOR | 004 | A 12 101 608 60 | - |
| 012 | STUD M 8X18 DIN 939-5 S CAMSHAFT BEARINGS TO CYLINDER HEAD |
003 | - | |
| REPLACED BY 8X12 N 37 B 8 H8X12 DIN 7 CAMSHAFT BEARINGS TO CYLINDER HEAD |
- | - | ||
| 013 | DOWEL PIN 8X10 N 37 B CAMSHAFT BEARINGS TO CYLINDER HEAD |
006 | - | |
| 018 | STUD M 10X35 DIN 835-5 S INTAKE PIPE AND EXHAUST MANIFOLD TO CYLINDER HEAD |
004 | - | |
| 019 | STUD M 10X30 DIN 835-5 S INTAKE PIPE AND EXHAUST MANIFOLD TO CYLINDER HEAD |
002 | - | |
| 020 | STUD (COOLING WATER THERMOSTAT TO CYLINDER HEAD) M 8X18 DIN 939-5 S |
002 | - | |
| 021 | STUD (CHAIN TIGHTENER HOUSING TO CYLINDER HEAD) M 8X20 DIN 939-5 S |
001 | - | |
| 030 | CONNECTION FITTING WATER TEMPERATURE GAUGE CONNECTION TO CYLINDER HEAD |
001 | A 00 054 201 84 | - |
| 031 | SEAL RING A 14X18 DIN 7603 A1 WATER TEMPERATURE GAUGE CONNECTION TO CYLINDER HEAD |
001 | - | |
| REPLACED BY 121 050 00 24 TOGETHER WITH 6 THRUST RING 121 053 02 62 |
- | A 12 105 300 29 | - | |
| 032 | VALVE GUIDE, INTAKE; O.D., 14.00-MM |
004 | A 12 105 000 24 | - |
| VALVE GUIDE, INTAKE; O.D., 14.018-MM FOR REPAIRS |
004 | A 12 105 006 24 | - | |
| REPLACED BY 121 050 02 24 TOGETHER WITH 6 THRUST RING 121 053 02 62 |
- | A 12 105 301 29 | - | |
| VALVE GUIDE, INTAKE; O.D., 14.20-MM FOR REPAIRS |
004 | A 12 105 002 24 | - | |
| REPLACED BY 121 050 03 24 TOGETHER WITH 6 THRUST RING 121 053 02 62 |
- | A 12 105 302 29 | - | |
| VALVE GUIDE, INTAKE; O.D., 14.40-MM FOR REPAIRS |
004 | A 12 105 003 24 | - | |
| 033 | SNAP RING 14 DIN 9045 |
004 | - | |
| REPLACED BY 121 050 01 24 TOGETHER WITH 6 THRUST RING 121 053 02 62 |
- | A 18 005 304 30 | - | |
| 034 | VALVE GUIDE, EXHAUST; O.D., 14.00-MM |
004 | A 12 105 001 24 | - |
| VALVE GUIDE, EXHAUST; O.D., 14. 018-MM Zastąpiono przez: A 121 050 21 24 |
- | A 12 105 007 24 | - | |
| VALVE GUIDE, EXHAUST; O.D., 14.018-MM FOR REPAIRS |
004 | A 12 105 021 24 | - | |
| REPLACED BY 121 050 04 24 TOGETHER WITH 6 THRUST RING 121 053 02 62 |
- | A 18 005 305 30 | - | |
| VALVE GUIDE, EXHAUST; O.D., 14.20-MM Zastąpiono przez: A 121 050 22 24 |
- | A 12 105 004 24 | - | |
| VALVE GUIDE, EXHAUST; O.D., 14.20-MM FOR REPAIRS |
004 | A 12 105 022 24 | - | |
| REPLACED BY 121 050 05 24 TOGETHER WITH 6 THRUST RING 121 053 02 62 |
- | A 18 005 307 30 | - | |
| VALVE GUIDE, EXHAUST; O.D., 14.40-MM Zastąpiono przez: A 121 050 23 24 |
- | A 12 105 005 24 | - | |
| VALVE GUIDE, EXHAUST; O.D., 14.40-MM FOR REPAIRS |
004 | A 12 105 023 24 | - | |
| 035 | SNAP RING 14 DIN 9045 |
004 | - | |
| REPLACED BY 121 050 12 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 003 97 | - | |
| REPLACED BY 121 050 12 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 000 97 | - | |
| REPLACED BY 121 050 12 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 006 97 | - | |
| SET OF CAMSHAFT BEARINGS I.D. = STANDARD Zastąpiono przez: A 121 050 12 97 |
- | A 12 105 009 97 | - | |
| SET OF CAMSHAFT BEARINGS I.D. = STANDARD |
001 | A 12 105 015 97 | - | |
| 036 | SET OF CAMSHAFT BEARINGS I.D. = STANDARD |
001 | A 12 105 018 97 | - |
| REPLACED BY 121 050 13 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 001 97 | - | |
| REPLACED BY 121 050 13 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 004 97 | - | |
| REPLACED BY 121 050 13 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 007 97 | - | |
| SET OF CAMSHAFT BEARINGS I.D., BY 0.1 MM NARROWER, REPAIR SIZE = INTERMEDIATE SIZE Zastąpiono przez: A 121 050 13 97 |
- | A 12 105 010 97 | - | |
| SET OF CAMSHAFT BEARINGS I.D., BY 0.1 MM NARROWER, REPAIR SIZE = INTERMEDIATE SIZE |
001 | A 12 105 016 97 | - | |
| SET OF CAMSHAFT BEARINGS I.D., BY 0.1 MM NARROWER, REPAIR SIZE = INTERMEDIATE SIZE |
001 | A 12 105 019 97 | - | |
| REPLACED BY 121 050 14 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 002 97 | - | |
| REPLACED BY 121 050 14 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 005 97 | - | |
| REPLACED BY 121 050 14 97 TOGETHER WITH 3 HEX. SOCKET SCREW M 12X140 DIN 912-10 K |
- | A 12 105 008 97 | - | |
| SET OF CAMSHAFT BEARINGS I.D., BY 0.25 MM NARROWER REPAIR SIZE I Zastąpiono przez: A 121 050 14 97 |
- | A 12 105 011 97 | - | |
| SET OF CAMSHAFT BEARINGS I.D., BY 0.25 MM NARROWER REPAIR SIZE I |
001 | A 12 105 017 97 | - | |
| SET OF CAMSHAFT BEARINGS I.D., BY 0.25 MM NARROWER REPAIR SIZE I |
001 | A 12 105 020 97 | - | |
| 037 | WASHER 8,4 DIN 433 CAMSHAFT BEARINGS TO CYLINDER HEAD |
003 | - | |
| 038 | HEX. NUT M 8 DIN 934-5 S CAMSHAFT BEARINGS TO CYLINDER HEAD |
003 | - | |
| CYLINDER HEAD GASKET Zastąpiono przez: A 121 016 08 20 |
- | A 12 101 604 20 | - | |
Zastąpiono przez: A 121 016 23 20 |
- | A 12 101 616 20 | - | |
| CYLINDER HEAD GASKET OPTIONAL Zastąpiono przez: A 121 016 23 20 |
- | A 12 101 621 20 | - | |
| CYLINDER HEAD GASKET OPTIONAL |
001 | A 12 101 623 20 | - | |
| CYLINDER HEAD GASKET OPTIONAL Zastąpiono przez: A 121 016 26 20 |
- | A 12 101 618 20 | - | |
| 040 | CYLINDER HEAD GASKET OPTIONAL |
001 | A 12 101 626 20 | - |
| 041 | HEX. SOCKET SCREW M 8X20 DIN 912-8 G CYLINDER HEAD TO CYLINDER CRANKCASE |
002 | - | |
| 042 | WASHER 8,4 DIN 433 CYLINDER HEAD TO CYLINDER CRANKCASE |
002 | - | |
| 043 | HEX. SOCKET SCREW M 8X30 DIN 912-8 G CYLINDER HEAD TO CYLINDER CRANKCASE |
001 | - | |
| 044 | SPRING WASHER B 8 DIN 137 CYLINDER HEAD TO CYLINDER CRANKCASE |
001 | - | |
| 046 | HEX. SOCKET SCREW M 12X140 DIN 912-10 K CYLINDER HEAD TO CYLINDER CRANKCASE |
006 | - | |
| 047 | WASHER CYLINDER HEAD TO CYLINDER CRANKCASE |
006 | A 18 699 009 40 | - |
Zastąpiono przez: A 180 016 03 38 |
- | A 18 001 000 40 | - | |
| U-TYPE CLAMP FOR CYLINDER HEAD COVER Zastąpiono przez: A 180 016 03 38 |
- | A 18 001 602 38 | - | |
| 048 | U-TYPE CLAMP FOR CYLINDER HEAD COVER |
002 | A 18 001 605 38 | - |
| 049 | HEX. SOCKET SCREW M 12X105 DIN 912-10 K U-TYPE CLAMP OR CYLINDER HEAD, RESP., TO CYLINDER CRANKCASE |
004 | - | |
| 050 | WASHER 13 DIN 433 U-TYPE CLAMP OR CYLINDER HEAD, RESP., TO CYLINDER CRANKCASE |
004 | - | |
| OIL PIPE Zastąpiono przez: A 121 180 01 27 |
- | A 12 118 000 27 | - | |
| 051 | OIL PIPE | 001 | A 12 118 001 27 | - |
| 052 | HEX. SOCKET SCREW M 6X15 DIN 912-8 G OIL PIPE TO CAMSHAFT BEARING, FAN SIDE |
001 | - | |
| 053 | SPRING WASHER B 6 DIN 137 OIL PIPE TO CAMSHAFT BEARING, FAN SIDE |
001 | - | |
| PIPE CLAMP A 8,2 DIN 71 434 OIL PIPE TO U-TYPE CLAMP Zastąpiono przez: A 121 995 04 20 |
- | - | ||
| 054 | PIPE CLAMP OIL PIPE TO U-TYPE CLAMP |
002 | A 12 199 504 20 | - |
| 055 | HEX. HEAD SCREW M 4X8 DIN 933-8 G OIL PIPE TO U-TYPE CLAMP |
002 | - | |
| 056 | SPRING WASHER B 4 DIN 137 OIL PIPE TO U-TYPE CLAMP |
002 | - | |
CYLINDER HEAD COVER WITH BREATHING |
- | XXX XXX XXX XXXX | - | |
Zastąpiono przez: A 121 016 14 05 |
- | A 12 101 004 30 | - | |
Zastąpiono przez: A 121 016 14 05 |
- | A 12 101 010 30 | - | |
| CYLINDER HEAD COVER Zastąpiono przez: A 121 016 14 05 |
- | A 12 101 011 30 | - | |
| 060 | CYLINDER HEAD COVER OPTIONAL |
001 | A 12 101 018 30 | - |
| CYLINDER HEAD COVER OPTIONAL |
001 | A 12 101 019 30 | - | |
| 061 | SCREW CAP (FOR OIL FILLING) |
001 | A 13 650 100 54 | - |
| 062 | SEAL RING, 47X65X3-MM (FOR SCREW CAP) |
001 | A 18 099 702 40 | - |
| 066 | ANNULAR FITTING BREATHER PIPE CONNECTION TO CYLINDER HEAD COVER |
001 | A 12 199 000 88 | - |
| 067 | SEAL RING A 18X22 DIN 7603 A1 BREATHER PIPE CONNECTION TO CYLINDER HEAD COVER |
002 | - | |
| 068 | HOLLOW SCREW A 13 DIN 7623 BREATHER PIPE CONNECTION TO CYLINDER HEAD COVER |
001 | - | |
| REPLACED BY M 8X28 DIN 931-8 G |
- | A 18 001 000 94 | - | |
| REPLACED BY M 8X28 DIN 931-8 G |
- | A 12 199 000 01 | - | |
| 069 | HEX. HEAD SCREW (CYLINDER HEAD COVER TO CYLINDER HEAD) M 8X28 DIN 931-8 G |
002 | - | |
| 070 | SEAL RING C 8X14 DIN 7603 CU AS HEX. HEAD SCREWS TO CYLINDER HEAD COVER |
002 | - | |
| 072 | GASKET FOR CYLINDER HEAD COVER |
001 | A 12 101 601 80 | - |
| RUBBER HOSE, 15X20X150-MM (FOR BREATHING OF CYLINDER HEAD COVER) Zastąpiono przez: A 121 997 06 82 |
- | A 12 199 700 82 | - | |
| 076 | RUBBER HOSE BREATHER PIPE TO CYLINDER HEAD COVER |
001 | A 12 199 714 82 | - |
| HOSE CLAMP ASR 20/9X0,45 N 269 BREATHER PIPE TO CYLINDER HEAD COVER |
001 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy