PROPELLER SHAFT

EPC / Mercedes / 1 / FG / FG 189.000 / 41 / 031
‹ ›

№- Nazwa I* Numer części A

PROPELLER SHAFT 		- XXX XXX XXX XXXX -
001 PROPELLER SHAFT,
DIVIDED WITH INTERMEDIATE BEARING, WITHOUT BEARING BRACKET, RUBBER MOUNTING AND CENTERING CROSS WITH REINFORCED JOINT 		001 A 18 641 010 03  -
002 PROPELLER SHAFT,
DIVIDED, WITH INTERMEDIATE BEARING, WITHOUT BEARING BRACKET, RUBBER MOUNTING AND CENTERING CROSS 		001 A 18 641 011 03  -
003 FRONT PROPELLER
SHAFT WITH BEARING 		001 A 18 641 033 01  -
004 FRONT PROPELLER
SHAFT WITH BEARING 		001 A 18 641 032 01  -
005 GREASE FITTING
A 6 DIN 71412 		001 -
05a OVERFLOW VALVE 001 A 12 299 700 87  -
REPLACED BY
188 413 03 01 TOGETHER WITH 1 RUBBER MOUNTING 180 413 02 12 UP TO CHASSIS 7500140 		- A 18 841 302 01  -
006 HOUSING
FROM CHASSIS 7500141 		001 A 18 841 303 01  -
007 GROOVED BEARING
6006 X-C 3 DIN 625 		001 -
SPACER RING
WITH GROOVE FOR SEALING RING
Zastąpiono przez: A  180 413 01 51 		- A 11 141 300 51  -
008 SPACER RING
WITH GROOVE FOR SEALING RING 		002 A 18 041 301 51  -
009 SEALING RING
TO 180 413 01 51 		002 A 18 099 703 40  -
010 LOCKING RING
55X2 DIN 472 		002 -
015 CONNECTION PIECE
M 8 X 1 X 24 DIN 71428 IN BEARING FOR PROPELLER SHAFT INTERMEDIATE BEARING FOR CENTRAL LUBRICATION 		001 -
016 JOINT FLANGE 001 A 18 641 109 45  -
017 COMPRESSION RING
A 40 X 3 AC DIN 73102 		002 -
018 LOCKING PLATE
FOR JOINT FLANGE AT FRONT PROPELLER SHAFT 		001 A 18 299 400 43  -
019 GROOVED NUT
FOR JOINT FLANGE AT FRONT PROPELLER SHAFT 		001 A 18 699 000 60  -
020 REAR PROPELLER
SHAFT WITH UNIVERSAL JOINT 		001 A 18 841 018 02  -
UNIVERSAL CROSS,
SELF-LUBRICATING, WITH NEEDLES AND NEEDLE BEARING BUSHINGS
Zastąpiono przez: A  111 410 00 31 		- A 18 041 003 31  -
021 UNIVERSAL CROSS,
SELF-LUBRICATING, WITH NEEDLES AND NEEDLE BEARING BUSHINGS 		001 A 11 141 000 31  -
GREASE NIPPLE
TO 180 410 03 31 		001 A 12 299 700 88  -
022 SNAP RING 1.5 MM THICK
OPTIONAL FOR NEEDLE BEARING BUSHING 		004 A 18 899 400 34  -
SNAP RING 1.60 MM THICK
OPTIONAL FOR NEEDLE BEARING BUSHING 		004 A 18 899 402 34  -
SNAP RING 1.65 MM THICK
OPTIONAL FOR NEEDLE BEARING BUSHING 		004 A 18 899 403 34  -
SNAP RING 1.70 MM THICK
OPTIONAL FOR NEEDLE BEARING BUSHING 		004 A 18 899 404 34  -
UNIVERSAL CROSS,
SELF-LUBRICATING, WITH NEEDLES AND NEEDLE BEARING BUSHINGS
Zastąpiono przez: A  111 410 00 31 		- A 18 041 003 31  -
UNIVERSAL CROSS,
SELF-LUBRICATING, WITH NEEDLES AND NEEDLE BEARING BUSHINGS 		001 A 11 141 000 31  -
GREASE NIPPLE
TO 180 410 03 31 		001 A 12 299 700 88  -
SNAP RING 1.50 MM THICK
OPTIONAL FOR NEEDLE BEARING BUSHING 		004 A 18 899 400 34  -
SNAP RING 1.60 MM THICK
OPTIONAL FOR NEEDLE BEARING BUSHING 		004 A 18 899 402 34  -
SNAP RING 1.65 MM THICK
OPTIONAL FOR NEEDLE BEARING BUSHING 		004 A 18 899 403 34  -
SNAP RING 1.70 MM THICK
OPTIONAL FOR NEEDLE BEARING BUSHING 		004 A 18 899 404 34  -
023 GREASE FITTING
A 6 DIN 71412 IN GROOVED HUB 		001 -
024 HEX.-HD. SCREW
FOR FRONT AT REAR PROPELLER SHAFT 		006 A 18 299 000 01  -
025 LOCKING PLATE
FOR FRONT AT REAR PROPELLER SHAFT 		003 A 18 699 403 25  -
026 HEX. NUT
M 8 DIN 934-5 S FOR FRONT AT REAR PROPELLER SHAFT 		006 -
027 SEALING RING
BETWEEN CENTERING CROSS AND JOINT FLANGE 		001 A 18 099 710 40  -
CENTERING CROSS
WITH LOCKING PLATE
Zastąpiono przez: A  111 410 01 30 		- A 18 641 006 30  -
030 CENTERING CROSS
WITH LOCKING PLATE 		001 A 11 141 001 30  -
BALL SOCKET
Zastąpiono przez: A  136 411 01 18 		- A 13 641 100 18  -
031 BALL SOCKET 002 A 13 641 101 18  -
032 CENTERING BALL
FOR PROPELLER SHAFT 		001 A 18 441 100 17  -
034 PRESSURE SPRING
FOR BALL SOCKET 		001 A 18 499 304 01  -
LOCKING PLATE
UP TO CHASSIS 		001 A 18 041 100 76  -
035 LOCKING PLATE
FROM CHASSIS 		001 A 11 141 100 76  -
LOCKING RING
30X1,2 DIN 472 FROM CHASSIS 		001 -
036 FITTED SCREW
FOR JOINT DISC AT PROPELLER SHAFT 		003 A 18 641 105 71  -
037 WASHER
FOR JOINT DISC AT PROPELLER SHAFT 		003 A 18 799 014 40  -
038 CASTLE NUT
M 12X1,5 DIN 937-5 S FOR JOINT DISC AT PROPELLER SHAFT 		003 -
RUBBER MOUNTING
Zastąpiono przez: A  180 413 02 12 		- A 18 041 301 12  -
039 RUBBER MOUNTING 001 A 18 041 302 12  -
040 MOUNTING SUPPORT
FOR PROPELLER SHAFT INTERMEDIATE BEARING 		001 A 18 041 003 39  -
JOINT DISC
Zastąpiono przez: A  189 411 00 15 		- A 18 641 102 15  -
045 JOINT DISC 001 A 18 941 100 15  -
046 CENTERING CROSS
FOR TRANSMISSION FLANGE 		001 A 18 641 002 30  -
047 SEALING RING
FOR PROPELLER SHAFT AT TRANSMISSION 		001 A 12 041 100 60  -
048 FITTED SCREW
FOR CENTERING CROSS AND JOINT DISC WITH PROPELLER SHAFT AT TRANSMISSION 		003 A 18 641 105 71  -
049 FITTED SCREW
FOR CENTERING CROSS AND JOINT DISC WITH PROPELLER SHAFT AT TRANSMISSION 		003 A 18 641 101 71  -
050 WASHER
FOR CENTERING CROSS AND JOINT DISC WITH PROPELLER SHAFT AT TRANSMISSION 		003 A 18 799 014 40  -
050 WASHER
FOR CENTERING CROSS AND JOINT DISC WITH PROPELLER SHAFT AT TRANSMISSION 		006 A 18 799 014 40  -
051 CASTLE NUT
M 12X1,5 DIN 937-5 S FOR CENTERING CROSS AND JOINT DISC WITH PROPELLER SHAFT AT TRANSMISSION 		003 -
052 COTTER PIN
3X28 DIN 94 FOR CENTERING CROSS AND JOINT DISC WITH PROPELLER SHAFT AT TRANSMISSION 		006 -
053 HEX.-HD. SCREW
M 8X18 DIN 933-8 G FOR INTERMEDIATE BEARING AT BRACKET, FRAME 		002 -
054 TOOTHED WASHER
A 8,4 DIN 6797 FOR INTERMEDIATE BEARING AT BRACKET, FRAME 		002 -
055 WASHER
8,4 DIN 125 FOR INTERMEDIATE BEARING AT BRACKET, FRAME 		002 -
056 HEX.-HD. SCREW
FOR PROPELLER SHAFT AT REAR AXLE 		006 A 18 299 000 01  -
057 LOCKING PLATE
FOR PROPELLER SHAFT AT REAR AXLE 		003 A 18 699 403 25  -
058 HEX. NUT
M 8 DIN 934-5 S FOR PROPELLER SHAFT AT REAR AXLE 		006 -
059 COVER
FOR PROPELLER SHAFT INTERMEDIATE BEARING 		001 A 18 631 205 54  -
060 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR COVER AT FRAME CONNECTING PLATE, BOTTOM 		004 -
061 LOCK WASHER
B 6 DIN 127 FOR COVER AT FRAME CONNECTING PLATE, BOTTOM 		004 -
Aby dowiedzieć się, gdzie kupić przedmiot lub jego odpowiednika, kliknij na numerze katalogowym.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA