4MATIC STEERING KNUCKLE & CONTROL ARM

EPC / Mercedes / Car / FG / FG 218.976 / 33 / 045
‹ ›

№- Nazwa I* Numer części
010 STEERING KNUCKLE
LEFT
Zastąpiono przez: A 218 332 05 00 		001 A 218 332 01 00
010 STEERING KNUCKLE
LEFT 		001 A 218 332 05 00
010 STEERING KNUCKLE
RIGHT
Zastąpiono przez: A 218 332 06 00 		001 A 218 332 02 00
010 STEERING KNUCKLE
RIGHT 		001 A 218 332 06 00
030 RETAINING RING
LEFT 		001 N 000472 092000
030 RETAINING RING
RIGHT 		001 N 000472 092000
040 ANGULAR CONTACT BALL BRG.
LEFT 		001 A 221 981 04 06
040 ANGULAR CONTACT BALL BRG.
RIGHT 		002 A 221 981 04 06
050 FLANGE
LEFT 		002 A 221 337 02 45
050 FLANGE
RIGHT 		002 A 221 337 02 45
060 BOLT
LEFT AXLE SHAFT M16X60 		001 A 000 990 75 03
060 BOLT
RIGHT AXLE SHAFT M16X60 		001 A 000 990 75 03
070 PLUG
WHEEL HUB, LEFT 		001 A 168 357 00 89
070 PLUG
WHEEL HUB, RIGHT 		001 A 168 357 00 89
100 STRUT ROD
LEFT WITH BEARING
Zastąpiono przez: A 218 330 15 01 		001 A 218 330 87 00
100 STRUT ROD
LEFT WITH BEARING
ONLY REPLACEABLE BY PAIRS 		001 A 218 330 15 01
100 STRUT ROD
RIGHT WITH BEARING
Zastąpiono przez: A 218 330 16 01 		001 A 218 330 88 00
100 STRUT ROD
RIGHT WITH BEARING
ONLY REPLACEABLE BY PAIRS 		001 A 218 330 16 01
110 IMPORTANT INFORMATION
PART IS NOT DELIVERED, ORDER NEXT HIGHER ASSEMBLY 		001 Q 0000000001
120 HEXAGON HEAD BOLT
TORQUE STRUT TO INTEGRAL CARRIER, LEFT M14X1.5X120 		001 N 910105 014022
120 HEXAGON HEAD BOLT
TORQUE STRUT TO INTEGRAL CARRIER, RIGHT M14X1.5X120 		001 N 910105 014022
120 ADJUSTMENT SCREW
LEFT, FOR ADJUSTING ONLY 		001 A 212 333 00 71
120 ADJUSTMENT SCREW
RIGHT, FOR ADJUSTING ONLY 		001 A 212 333 00 71
130 SPACER DISK
TORQUE STRUT TO INTEGRAL CARRIER, LEFT 		002 A 220 333 00 76
130 SPACER DISK
TORQUE STRUT TO INTEGRAL CARRIER, RIGHT 		002 A 220 333 00 76
130 RS SPACER RING
LEFT, FOR ADJUSTING ONLY 		002 A 221 333 01 77
130 RS SPACER RING
RIGHT, FOR ADJUSTING ONLY 		002 A 221 333 01 77
140 HEXAGON NUT
TORQUE STRUT TO INTEGRAL CARRIER, LEFT M14X1,5

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
===================================================================================================
THE OLD PART MUST NO LONGER BE INSTALLED
Zastąpiono przez: N 000000 008261 		001 N 000000 003281
140 HEXAGON NUT
TORQUE STRUT TO INTEGRAL CARRIER, LEFT M14X1.5

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
=================================================================================================== 		001 N 000000 008261
140 HEXAGON NUT
TORQUE STRUT TO INTEGRAL CARRIER, LEFT M14X1,5

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 		001 A 005 990 48 50
140 HEXAGON NUT
TORQUE STRUT TO INTEGRAL CARRIER, RIGHT M14X1,5

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
===================================================================================================
THE OLD PART MUST NO LONGER BE INSTALLED
Zastąpiono przez: N 000000 008261 		001 N 000000 003281
140 HEXAGON NUT
TORQUE STRUT TO INTEGRAL CARRIER, RIGHT M14X1.5

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
=================================================================================================== 		001 N 000000 008261
140 HEXAGON NUT
TORQUE STRUT TO INTEGRAL CARRIER, RIGHT M14X1,5

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 		001 A 005 990 48 50
140 NUT W FLANGE, BINDING
LEFT, FOR ADJUSTING ONLY M14X1.5 		001 A 002 990 51 54
140 NUT W FLANGE, BINDING
RIGHT, FOR ADJUSTING ONLY M14X1.5 		001 A 002 990 51 54
150 TS ADJUSTMENT SCREW
LEFT, FOR ADJUSTING ONLY 		001 A 000 333 10 71
150 TS ADJUSTMENT SCREW
RIGHT, FOR ADJUSTING ONLY 		001 A 000 333 10 71
170 HEXAGON NUT
TORQUE STRUT AT STEERING KNUCKLE, LEFT M14X1,5
THE OLD PART MUST NO LONGER BE INSTALLED
Zastąpiono przez: A 005 990 48 50 		001 N 000000 003281
170 HEXAGON NUT
TORQUE STRUT AT STEERING KNUCKLE, LEFT M14X1,5 		001 A 005 990 48 50
170 HEXAGON NUT
TORQUE STRUT AT STEERING KNUCKLE, RIGHT M14X1,5
THE OLD PART MUST NO LONGER BE INSTALLED
Zastąpiono przez: A 005 990 48 50 		001 N 000000 003281
170 HEXAGON NUT
TORQUE STRUT AT STEERING KNUCKLE, RIGHT M14X1,5 		001 A 005 990 48 50
200 CROSS MEMBER
LEFT 		001 A 218 330 22 00
200 CROSS MEMBER
RIGHT 		001 A 218 330 22 00
220 HEXAGON HEAD BOLT
CROSS STRUT TO LEFT INTEGRAL CARRIER M14 X100-10.9 		001 N 308765 014008
220 HEXAGON HEAD BOLT
CROSS STRUT TO RIGHT INTEGRAL CARRIER M14 X100-10.9 		001 N 308765 014008
220 ADJUSTMENT SCREW
LEFT, FOR ADJUSTING ONLY 		001 A 212 333 00 71
220 ADJUSTMENT SCREW
RIGHT, FOR ADJUSTING ONLY 		001 A 212 333 00 71
230 SPACER DISK
CROSS STRUT TO LEFT INTEGRAL CARRIER 		002 A 220 333 00 76
230 SPACER DISK
CROSS STRUT TO RIGHT INTEGRAL CARRIER 		002 A 220 333 00 76
230 RS SPACER RING
LEFT, FOR ADJUSTING ONLY 		002 A 221 333 01 77
230 RS SPACER RING
RIGHT, FOR ADJUSTING ONLY 		002 A 221 333 01 77
240 HEXAGON NUT
CROSS STRUT TO LEFT INTEGRAL CARRIER M14X1,5

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
===================================================================================================
THE OLD PART MUST NO LONGER BE INSTALLED
Zastąpiono przez: N 000000 008261 		001 N 000000 003281
240 HEXAGON NUT
CROSS STRUT TO LEFT INTEGRAL CARRIER M14X1.5

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
=================================================================================================== 		001 N 000000 008261
240 HEXAGON NUT
CROSS STRUT TO LEFT INTEGRAL CARRIER M14X1,5

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 		001 A 005 990 48 50
240 HEXAGON NUT
CROSS STRUT TO RIGHT INTEGRAL CARRIER M14X1,5

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
===================================================================================================
THE OLD PART MUST NO LONGER BE INSTALLED
Zastąpiono przez: N 000000 008261 		001 N 000000 003281
240 HEXAGON NUT
CROSS STRUT TO RIGHT INTEGRAL CARRIER M14X1.5

THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION
TAKES PLACE VIA THE SCN PROCESS.
=================================================================================================
SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION:
A 001 546 99 41 GREEN 0.7 - 2.4 MM2
A 002 546 00 41 RED 2.0 - 4.0 MM2
A 002 546 01 41 BLUE 3.5 - 8.0 MM2
A 002 546 11 41 YELLOW 7.5 - 12.0 MM2
BUTT JOINT:
A 002 546 13 41 0.5 MM2
A 002 546 14 41 0.8 MM2
A 002 546 15 41 1.3 MM2
A 002 546 16 41 2.0 MM2
=================================================================================================== 		001 N 000000 008261
240 HEXAGON NUT
CROSS STRUT TO RIGHT INTEGRAL CARRIER M14X1,5

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 		001 A 005 990 48 50
240 NUT W FLANGE, BINDING
LEFT, FOR ADJUSTING ONLY M14X1.5 		001 A 002 990 51 54
240 NUT W FLANGE, BINDING
RIGHT, FOR ADJUSTING ONLY M14X1.5 		001 A 002 990 51 54
250 TS ADJUSTMENT SCREW
LEFT, FOR ADJUSTING ONLY 		001 A 000 333 10 71
250 TS ADJUSTMENT SCREW
RIGHT, FOR ADJUSTING ONLY 		001 A 000 333 10 71
270 HEXAGON NUT
CROSS STRUT TO STEERING KNUCKLE, LEFT M14X1,5
THE OLD PART MUST NO LONGER BE INSTALLED
Zastąpiono przez: A 005 990 48 50 		001 N 000000 003281
270 HEXAGON NUT
CROSS STRUT TO STEERING KNUCKLE, LEFT M14X1,5 		001 A 005 990 48 50
270 HEXAGON NUT
CROSS STRUT TO STEERING KNUCKLE, RIGHT M14X1,5
THE OLD PART MUST NO LONGER BE INSTALLED
Zastąpiono przez: A 005 990 48 50 		001 N 000000 003281
270 HEXAGON NUT
CROSS STRUT TO STEERING KNUCKLE, RIGHT M14X1,5 		001 A 005 990 48 50
Aby dowiedzieć się, gdzie kupić przedmiot lub jego odpowiednika, kliknij na numerze katalogowym.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA