OIL PUMP AND LUBRICATING LINE

EPC / Mercedes / Car / FG / FG 188.013 / 18 / 009
‹ ›

№- Nazwa I* Numer części
060 OIL PUMP, COMPLETE
SUCTION PUMP 		001 A 199 180 00 01
061 BUSHING 001 A 136 181 01 50
062 DRIVE GEAR, OIL PUMP 001 A 198 180 00 07
063 OIL PUMP
SHAFT WITH OIL PUMP GEAR 		001 A 198 180 01 08
064 OIL PUMP 001 A 199 180 00 03
065 BUSHING 002 A 194 181 01 50
066 WASHER 002 B 18 N 59 8N59a
067 STUD BOLT
M 6X15 DIN 835 - 5 S 		002
068 HEX.-HD.SCREW
M 6X55 DIN 931-8 G OIL PUMP HOUSING, LOWER PART AT UPPER PART 		004
069 WASHER
6,4 DIN 125 OIL PUMP HOUSING, LOWER PART AT UPPER PART 		008
070 HEX. NUT
M 6 DIN 934 - 5 S OIL PUMP HOUSING, LOWER PART AT UPPER PART 		004
071 FOLLOWER, OIL PUMP 001 A 198 181 00 27
072 TIGHTENING PIN
4X18 DIN 1481 FOR FOLLOWER AT OIL PUMP 		001
073 SNAP RING
16 DIN 9045 FOR FOLLOWER AT OIL PUMP 		001
074 SUCTION PIPE
WITH SUCTION BASKET, COMPLETE 		001 A 199 180 00 52
075 CLAMP 001 A 186 995 06 44
076 SEALING FLANGE
SUCTION PIPE AT VACUUM PUMP 		001 A 186 997 01 80
077 LOCK WASHER
B 6 DIN 127 SUCTION PIPE AT VACUUM PUMP 		002
078 HEX. NUT
M 6 DIN 934-5 S SUCTION PIPE AT VACUUM PUMP 		002
079 COUPLING SLEEVE,
OIL PUMP DRIVE OIL PUMP AT CYLINDER CRANKCASE 		001 A 186 181 04 33
080 SPRING WASHER
B 8 DIN 137 OIL PUMP AT CYLINDER CRANKCASE 		002
081 HEX.-HD. SCREW
M 8X18 DIN 933-8 G OIL PUMP AT CYLINDER CRANKCASE 		002
082 HEX.-HD. SCREW
M 6X15 DIN 933-8 G SUCTION PIPE, CLAMP AT BRACKET 		001
083 LOCK WASHER
B 6 DIN 127 SUCTION PIPE, CLAMP AT BRACKET 		001
084 HEX. NUT
M 6 DIN 934-5 S SUCTION PIPE, CLAMP AT BRACKET 		001
085 OIL PRESSURE RELIEF VALVE 001 A 186 180 02 33
086 SPRING FOR
OIL PRESSURE RELIEF VALVE 		001 A 186 993 17 01
087 PISTON
FOR OIL PRESSURE RELIEF VALVE 		001 A 159 181 00 42
088 CIRCLIP
12X1 DIN 472 		001
089 SEAL
D 20X24 DIN 7603 OIL PRESSURE RELIEF VALVE AT CRANKCASE, PLUG SIDE 		001
090 OIL PRESSURE RELIEF VALVE 001 A 186 180 03 33
091 SPRING 001 A 186 993 18 01
092 PISTON 001 A 159 181 00 42
093 CIRCLIP
12X1 DIN 472 		001
094 SEAL
D 20X24 DIN 7603 FOR OIL PRESSURE RELIEF VALVE AT CRANKCASE, REAR 		001
095 OIL LINE
FROM OIL FILTER TO OIL COOLER 		001 A 199 180 02 30
096 OIL LINE
FROM OIL COOLER TO CRANKCASE 		001 A 199 180 04 30
097 OIL LINE
FROM OIL FILTER TO INJECTION PUMP 		001 A 199 180 03 30
098 BRACKET
FOR BRACKET, OIL LINE, OIL FILTER, INJECTION PUMP FROM ENGINE NO. 65 00041 		001 A 199 180 00 40
099 CONNECTION FLANGE
FOR OIL OUTLET TO OIL CONTAINER FOR CONNECTION FLANGE AT CRANKCASE 		001 A 199 187 01 38
100 GASKET
FOR CONNECTION FLANGE AT CRANKCASE 		001 A 199 187 00 80
101 WASHER
8,4 DIN 125 FOR CONNECTION FLANGE AT CRANKCASE 		002
102 HEX.-HD. SCREW
M 8X25 DIN 931-8 G FOR CONNECTION FLANGE AT CRANKCASE 		001
103 HEX.-HD. SCREW
M 8X40 DIN 931-8 G FOR CONNECTION FLANGE AT CRANKCASE 		001
104 SEAL
D 22X27 DIN 7603 A1 FOR CONNECTION FLANGE AT CRANKCASE 		001
105 SCREWED NIPPLE
16 DIN 7627 FOR CONNECTION FLANGE AT CRANKCASE 		001
106 MOUNTING CLAMP
FOR OIL LINE AT BRACKET FROM ENGINE NO. 65 00041 		001 A 636 995 00 20
107 LOCK WASHER
B 5 DIN 127 FOR OIL LINE AT BRACKET FROM ENGINE NO. 65 00041 		001
108 HEX.-HD. SCREW
M 5X10 DIN 933-8 G FOR OIL LINE AT BRACKET FROM ENGINE NO. 65 00041 		001
Aby dowiedzieć się, gdzie kupić przedmiot lub jego odpowiednika, kliknij na numerze katalogowym.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA