INJECTION PUMP

EPC / Mercedes / 1 / M / M 189.980 / 07 / 005
‹ ›

№- Nazwa I* Numer części A

INJECTION PUMP 		- XXX XXX XXX XXXX -
001 INJECTION PUMP
WITH GOVERNOR AND FEED PUMP DISPLACE SCREWED NIPPLE FOR FUEL PIPE CONNECTION FROM FILTER; UP TO ENGINE 8500282 (MODEL 98 		001 A 00 207 416 01  -
INJECTION PUMP
WITH GOVERNOR AND FEED PUMP 		001 A 00 207 482 01  -
002 TAPPET SPRING 006 A 00 099 364 01  -
003 PIPE CONNECTION 006 A 00 007 800 68  -
004 CLAMPING JAW WITH THREAD
TO CLAMP PIPE CONNECTIONS 		003 A 00 007 805 35  -
005 CLAMPING JAW
WITH THROUGH HOLE TO CLAMP PIPE CONNECTIONS 		003 A 00 007 804 35  -
006 CYLINDR. SCREW
BM 5X25 DIN 84-4 S TO CLAMP PIPE CONNECTIONS 		003 -
007 WASHER
5,3 DIN 433 TO CLAMP PIPE CONNECTIONS 		003 -
008 LOCK WASHER
B 5 DIN 127 TO CLAMP PIPE CONNECTIONS 		003 -
009 OVERFLOW VALVE 001 A 00 007 401 84  -
010 HELICAL SPRING 001 A 00 009 117 15  -
011 NONRETURN VALVE 001 A 00 007 402 84  -
012 HELICAL SPRING 001 A 00 009 118 15  -
013 DIAPHRAGM
FOR GOVERNOR 		001 A 00 007 509 07  -
014 SUPPORTING RING
FOR DIAPHRAGM 		001 A 00 007 500 44  -
015 FUEL FEED PUMP 001 A 00 009 170 01  -
016 SCREW PLUG 001 A 00 009 104 56  -
017 SEALING RING
A 28X34 DIN 7603 FIB. 		001 -
018 ADJUSTMENT PLATE,
0.3-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT 		NB A 00 007 408 45  -
ADJUSTMENT PLATE,
0.5-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT 		NB A 00 007 409 45  -
ADJUSTMENT PLATE,
0.7-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT 		NB A 00 007 410 45  -
ADJUSTMENT PLATE,
0.9-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT 		NB A 00 007 411 45  -
ADJUSTMENT PLATE,
1.1-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT 		NB A 00 007 412 45  -
019 INTERMEDIATE FLANGE
BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT 		001 A 00 009 100 45  -
020 OIL DIPSTICK 001 A 00 007 412 60  -
021 AIR FILTER
ON GOVERNOR 		001 A 00 007 500 32  -
022 SEALING RING
A 12X16 DIN 7603 CU. ON GOVERNOR 		001 -
023 THERMOSTAT 001 A 00 020 377 75  -
THERMOSTAT HOUSING
Zastąpiono przez: A  000 203 01 73 		- A 00 020 300 73  -
024 THERMOSTAT HOUSING 001 A 00 020 301 73  -
025 SEALING RING
A 20X24 DIN 7603 CU 		001 -
026 LOCK WASHER
B 6 DIN 127 FOR THERMOSTAT AT GOVERNOR 		002 -
027 CYLINDR. SCREW
BM 6X25 DIN 84-4 S FOR THERMOSTAT AT GOVERNOR 		002 -
030 SOLENOID 001 A 00 007 400 88  -
031 GASKET 001 A 00 007 403 80  -
032 LOCK WASHER
B 6 DIN 127 FOR SOLENOID AT GOVERNOR 		002 -
033 HEX.-HD. SCREW
M 6X18 DIN 933-8 G FOR SOLENOID AT GOVERNOR 		002 -
040 FOLLOWER
FOR INJECTION PUMP 		001 A 19 907 700 09  -
041 COUPLING SLEEVE 001 A 18 907 002 91  -
042 SNAP RING
28 DIN 9045 		001 -
043 WOODRUFF KEY
3X6,5 DIN 6888 FOR FOLLOWER AT INJECTION PUMP 		001 -
044 LOCK WASHER
B 12 DIN 127 FOR FOLLOWER AT INJECTION PUMP 		001 -
045 HEX. NUT
M 12 DIN 936-5 S FOR FOLLOWER AT INJECTION PUMP 		001 -
046 SEALING FLANGE
FOR INJECTION PUMP AT DRIVE CASE 		002 A 19 907 702 79  -
047 INSULATING FLANGE
FOR INJECTION PUMP AT DRIVE CASE 		001 A 19 907 702 80  -
048 WASHER
8,4 DIN 125 FOR INJECTION PUMP AT DRIVE CASE 		003 -
049 LOCK WASHER
B 8 DIN 127 FOR INJECTION PUMP AT DRIVE CASE 		003 -
050 HEX. NUT
M 8 DIN 934-5 S FOR INJECTION PUMP AT DRIVE CASE 		003 -
INJECTION VALVE
IN SUCTION PIPE
Zastąpiono przez: A  000 078 00 23 		- A 00 007 800 22  -
055 INJECTION VALVE
IN SUCTION PIPE 		006 A 00 007 800 23  -
55a WASHER
FOR INJECTION VALVE AT SUCTION PIPE 		006 A 18 999 003 40  -
056 BOX NUT
FOR INJECTION VALVE AT SUCTION PIPE 		006 A 18 999 000 54  -
057 OVERFLOW TUBE
FOR INJECTION PUMP 		001 A 19 807 002 32  -
OIL PIPE
FROM OIL PRESSURE RELIEF VALVE, INJECTION PUMP TO FUEL FEED PUMP
Zastąpiono przez: A  198 180 00 27 		- A 19 918 000 27  -
058 OIL PIPE
FROM OIL PRESSURE RELIEF VALVE, INJECTION PUMP TO FUEL FEED PUMP 		001 A 19 818 000 27  -

MIXTURE CONTROLLER, FLAP-TYPE 		- XXX XXX XXX XXXX -
070 MIXTURE CONTROLLER, 001 A 00 014 006 53  -
071 THROTTLE SHAFT 001 A 00 014 102 11  -
072 THROTTLE VALVE 001 A 00 014 101 10  -
073 BUTTON-HEAD SCREW
AM 4X8 DIN 86-4 S 		002 -
074 LOCK WASHER
B 4 DIN 127 		002 -
075 SEALING RING 002 A 00 099 771 40  -
076 RADIAL SEALING RING
A 8X16 DIN 6503 TO SEAL THROTTLE SHAFT 		002 -
077 SHIM, 0.1 MM THICK
OPTIONAL 		NB A 00 099 025 40  -
SHIM, 0.5 MM THICK
OPTIONAL 		NB A 00 099 036 40  -
SHIM, 1.0 MM THICK
OPTIONAL 		NB A 00 099 037 40  -
078 WASHER
BETWEEN LEVER AND HOUSING 		001 A 00 099 038 40  -
079 THROTTLE LEVER
ON THROTTLE SHAFT 		001 A 00 014 101 12  -
080 HEX.-HD. SCREW
M 5 X 22 SZ DIN 931-8 G 		001 -
081 LOCK WASHER
B 5 DIN 127 		001 -
082 HEX. NUT
M 5 DIN 934-5 S 		001 -
085 LEVER 001 A 00 014 102 12  -
086 HEX.-HD. SCREW
M 5 X 22 SZ DIN 931-8 G 		001 -
087 LOCK WASHER
B 5 DIN 127 		001 -
088 HEX. NUT
M 5 DIN 934-5 S 		001 -
089 ADJUSTING SCREW
FOR IDLING ADJUSTMENT 		001 A 00 099 023 20  -
090 HELICAL SPRING
FOR IDLING ADJUSTMENT 		001 A 00 099 363 01  -
091 VALVE 001 A 00 014 102 58  -
092 SEALING RING
FOR VALVE 		001 A 00 099 774 40  -
093 PROTECTIVE CAP
WITH HELICAL SPRING FOR VALVE 		001 A 00 014 100 40  -
094 SPRING SEAT 001 A 00 014 101 43  -
095 NUT M 8X1 001 A 00 099 050 51  -
096 HOLLOW SCREW
A 6 DIN 7623-6 S FOR VACUUM LINE CONNECTION 		001 -
097 SEALING RING
A 12X16 DIN 7603 A1 		002 -
098 AIR NOZZLE M 8
IN BORE-HOLE FOR HOLLOW SCREW 		001 A 00 014 101 23  -
099 AIR NOZZLE
M 6 IN THE SIZES - IDLING NOZZLE 		001 -
099 AIR NOZZLE
M 6 IN THE SIZES 100 IDLING NOZZLE AS REQUIRED 		- A 00 007 113 34  -
099 AIR NOZZLE
M 6 IN THE SIZES 120 IDLING NOZZLE AS REQUIRED 		- A 00 007 115 34  -
099 AIR NOZZLE
M 6 IN THE SIZES 140 IDLING NOZZLE AS REQUIRED 		- A 00 007 102 34  -
099 AIR NOZZLE
M 6 IN THE SIZES 160 IDLING NOZZLE AS REQUIRED 		- A 00 007 103 34  -
099 AIR NOZZLE
M 6 IN THE SIZES 180 IDLING NOZZLE AS REQUIRED 		- A 00 007 118 34  -
099 AIR NOZZLE
M 6 IN THE SIZES 200 IDLING NOZZLE AS REQUIRED 		- A 00 007 101 34  -
099 AIR NOZZLE
M 6 IN THE SIZES 220 IDLING NOZZLE AS REQUIRED 		- A 00 007 105 34  -
099 AIR NOZZLE
M 6 IN THE SIZES 240 IDLING NOZZLE AS REQUIRED 		- A 00 007 121 34  -
099 AIR NOZZLE
M 6 IN THE SIZES 260 IDLING NOZZLE AS REQUIRED 		- A 00 007 123 34  -
100 AIR NOZZLE
M 6 IN THE SIZES - THROTTLING-TYPE NOZZLE 		001 -
100 AIR NOZZLE
M 6 IN THE SIZES 180 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 118 34  -
100 AIR NOZZLE
M 6 IN THE SIZES 190 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 104 34  -
100 AIR NOZZLE
M 6 IN THE SIZES 200 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 101 34  -
100 AIR NOZZLE
M 6 IN THE SIZES 210 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 119 34  -
100 AIR NOZZLE
M 6 IN THE SIZES 220 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 105 34  -
100 AIR NOZZLE
M 6 IN THE SIZES 230 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 120 34  -
100 AIR NOZZLE
M 6 IN THE SIZES 240 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 121 34  -
100 AIR NOZZLE
M 6 IN THE SIZES 250 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 122 34  -
100 AIR NOZZLE
M 6 IN THE SIZES 260 THROTTLING-TYPE NOZZLE AS REQUIRED 		- A 00 007 123 34  -
101 SCREW PLUG M 10X1
FOR IDLING NOZZLE AND THROTTLING-TYPE NOZZLE 		002 A 00 099 020 20  -
102 SEALING RING
A 10X14 DIN 7603 CU 		002 -
MAGNET
FOR SLOW-RUNNING CUTOUT VALVE
Zastąpiono przez: A  000 141 01 88 		- A 00 014 100 88  -
105 MAGNET
FOR SLOW-RUNNING CUTOUT VALVE 		001 A 00 014 101 88  -
106 LOCK WASHER
B 5 DIN 127 FOR MAGNET AT FLAP-TYPE, MIXTURE CONTROLLER 		004 -
107 CYLINDR. SCREW
M 5X18 DIN 84 -4 S FOR MAGNET AT FLAP-TYPE, MIXTURE CONTROLLER 		004 -
108 THREADED NIPPLE
10 DIN 7627 FOR CONNECTION, ADDITIONAL AIR LINE 		001 -
109 SEALING RING
A 16X20 DIN 7603 CU FOR CONNECTION, ADDITIONAL AIR LINE 		001 -
120 GASKET
FOR FLAP TYPE, MIXTURE CONTROLLER AT SUCTION PIPE 		001 A 19 914 100 80  -
121 WASHER
8,4 DIN 125 FOR FLAP TYPE, MIXTURE CONTROLLER AT SUCTION PIPE 		004 -
122 HEX. NUT
M 8 DIN 934-5 S FOR FLAP TYPE, MIXTURE CONTROLLER AT SUCTION PIPE 		004 -
SWITCH
FOR ANTI-CREEP DEVICE UP TO ENGINE 9500318 		- A 00 054 500 66  -
123 SWITCH
FOR ANTI-CREEP DEVICE FROM ENGINE 9500319 		- A 00 054 501 66  -
123a HEX.-HD. SCREW
FOR IDLING ADJUSTMENT FROM ENGINE 9500119 		- A 18 999 000 01  -
HEX. NUT
M 5 DIN 934-5 S FOR SWITCH AT FLAP-TYPE, MIXTURE CONTROLLER UP TO ENGINE 9500318 		- -
124 HEX. NUT 1/4" - 28
FOR SWITCH AT FLAP-TYPE, MIXTURE CONTROLLER FROM ENGINE 9500319 		- A 18 999 002 51  -
125 TEMPERATURE SWITCH
IN COOLING WATER DISCHARGE NIPPLE 		001 A 00 054 570 24  -
126 SEALING RING
D 14X18 DIN 7603 A1 TEMPERATURE SWITCH 		001 -
REPLACED BY
189 070 08 15 TOGETHER WITH 1 HEX.-HD. SOCKET SCREW M 8X100 DIN 912-8 G UP TO ENGINE 8500255 		- A 18 907 005 15  -
REPLACED BY
189 070 08 15 TOGETHER WITH 1 HEX.-HD. SOCKET SCREW M 8X100 DIN 912-8 G UP TO ENGINE 8500049 		- A 18 907 005 15  -
130 DRIVE HOUSING
WITH STUD BOLT FROM ENGINE 8500256 		- A 18 907 008 15  -
130 DRIVE HOUSING
WITH STUD BOLT FROM ENGINE 8500050 		- A 18 907 008 15  -
131 STUD BOLT
M 8X38 DIN 835-5 S 		003 -
132 BEARING SLEEVE 001 A 19 907 700 46  -
133 DRIVE SHAFT
FOR INJECTION PUMP 		001 A 18 907 701 05  -
134 GROOVED BEARING
6202 DIN 625 		002 -
135 CIRCLIP
35X1,5 DIN 472 		002 -
136 WOODRUFF KEY
3X5 DIN 6888 		001 -
137 SPROCKET WHEEL
FOR INJECTION PUMP 		001 A 18 907 700 12  -
138 SINGLE ROLLER CHAIN 001 A 19 907 700 19  -
139 BUSHING 001 A 18 907 700 50  -
140 LOCK WASHER
B 10 DIN 127 		001 -
141 HEX. NUT
M 10X1 DIN 936-5 S 		001 -
142 GASKET 001 A 18 907 700 80  -
143 COVER 001 A 18 907 700 02  -
144 HEX.-HD. SOCKET SCREW
M 6X12 DIN 912-6 G 		004 -
145 SPRING WASHER
B 6 DIN 137 		004 -
146 SLOTTED PLUG
M 16X1,5 SK 6 DIN 71022-4 S UP TO ENGINE 8500282 		- -
146 SLOTTED PLUG
M 16X1,5 SK 6 DIN 71022-4 S UP TO ENGINE 8500065 		- -
150 GASKET
FOR DRIVE HOUSING AT CYLINDER CRANKCASE 		001 A 19 918 100 80  -
151 WASHER
8,4 DIN 433 FOR DRIVE HOUSING AT CYLINDER CRANKCASE 		004 -
HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE UP TO ENGINE 8500255 		- -
HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE UP TO ENGINE 8500049 		- -
HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE FROM ENGINE 8500256 		- -
HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE FROM ENGINE 8500050 		- -
152 HEX.-HD. SOCKET SCREW
M 8X100 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE FROM ENGINE 8500256 		- -
152 HEX.-HD. SOCKET SCREW
M 8X100 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE FROM ENGINE 8500050 		- -
THREADED PIN
M 8X10 DIN 551-5 S FOR LOCKING CONTROL BORE IN DRIVE HOUSING FROM ENGINE 8500283 		- -
THREADED PIN
M 8X10 DIN 551-5 S FOR LOCKING CONTROL BORE IN DRIVE HOUSING FROM ENGINE 8500066 		- -
153 DOUBLE LEVER
FOR CONTROL 		001 A 18 907 001 22  -
ECCENTRIC SCREW
FOR DOUBLE LEVER STOP
Zastąpiono przez: A  180 072 02 71 		- A 18 907 500 71  -
154 ECCENTRIC SCREW
FOR DOUBLE LEVER STOP 		001 A 18 007 202 71  -
155 HEX. NUT
M 8 DIN 934-5 S FOR DOUBLE LEVER STOP 		001 -
156 WASHER
10,5 DIN 433 FOR DOUBLE LEVER AT SUCTION PIPE 		001 -
157 COTTER PIN
2X18 DIN 94 FOR DOUBLE LEVER AT SUCTION PIPE 		001 -
158 SPRING WASHER
A 10 DIN 137 FOR DOUBLE LEVER AT SUCTION PIPE 		001 -
159 PUSH ROD
FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE 		001 A 18 907 000 76  -
160 PUSH ROD
5X150X25/25 N 331 FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE 		001 -
161 HEX. NUT
M 5 DIN 934-5 S FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE 		003 -
BALL SOCKET
WITH SNAP RING A 8 DIN 71805 FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE
Zastąpiono przez: A  000 991 02 20 		- -
162 BALL SOCKET
WITH SNAP RING FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE 		001 A 00 099 102 20  -
SNAP RING
R 8 DIN 71805 FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE 		001 -
163 HEX. NUT
FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE 		001 A 18 999 000 51  -
164 SNAP RING
R 8 DIN 71805 FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE 		001 -
165 RELEASE SPRING 001 A 18 199 303 10  -
166 CONNECTING BRACKET
FOR RELEASE SPRING 		001 A 18 907 502 40  -
167 BRACKET 001 A 18 907 200 40  -
168 LOCK WASHER
B 6 DIN 127 FOR BRACKET AT SUCTION PIPE 		002 -
169 HEX.-HD. SCREW
M 6X15 DIN 933-8 G FOR BRACKET AT SUCTION PIPE 		002 -

PRESSURE PIPES 		- XXX XXX XXX XXXX -
180 PRESSURE PIPE
FOR CYLINDER 1 		001 A 18 907 000 33  -
181 PRESSURE PIPE
FOR CYLINDER 2 		001 A 18 907 001 33  -
182 PRESSURE PIPE
FOR CYLINDER 3 		001 A 18 907 002 33  -
183 PRESSURE PIPE
FOR CYLINDER 4 		001 A 18 907 003 33  -
184 PRESSURE PIPE
FOR CYLINDER 5 		001 A 18 907 004 33  -
185 PRESSURE PIPE
FOR CYLINDER 6 		001 A 18 907 005 33  -
186 PIPE CLAMP HALF
FOR PRESSURE PIPES AT CYLINDER HEAD FROM 		001 A 18 907 001 40  -
186a PIPE CLAMP HALF
FOR PRESSURE PIPES AT CYLINDER HEAD FROM FOR AIR CONDITIONING SYSTEM 		001 A 18 907 002 40  -
187 SEALING RING
A 12X16 DIN 7603 A1 FOR PIPE CLAMP HALF AT CYLINDER HEAD 		001 -
188 HEX.-HD. SCREW
M 12 X 1,5 X 15 DIN 961-8 G FOR PIPE CLAMP HALF AT CYLINDER HEAD 		001 -
199 PIPE CLAMP HALF
FOR PRESSURE PIPES AT PIPE CLAMP, CYLINDER HEAD 		001 A 18 907 800 85  -
200 LOCK WASHER
B 6 DIN 127 FOR PRESSURE PIPES AT PIPE CLAMP, CYLINDER HEAD 		002 -
201 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR PRESSURE PIPES AT PIPE CLAMP, CYLINDER HEAD 		002 -
202 PIPE CLAMP HALF
FOR HOLDING OF PRESSURE PIPES, CYLINDERS 1 - 4 		006 A 18 907 800 85  -
203 LOCK WASHER
B 6 DIN 127 FOR HOLDING OF PRESSURE PIPES, CYLINDERS 1 - 4 		006 -
204 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR HOLDING OF PRESSURE PIPES, CYLINDERS 1 - 4 		006 -
204a HEX. NUT
M 6 DIN 934-5 S FOR HOLDING OF PRESSURE PIPES, CYLINDERS 1 - 4 		006 -
205 FIXING CLAMP
FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATER PIPE 		002 A 18 999 500 07  -
RUBBER HOSE, 30 MM LONG
FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATER PIPE
Zastąpiono przez: A  186 997 20 82 		- A 18 999 702 82  -
206 RUBBER HOSE, 30 MM LONG
FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATER PIPE 		002 A 18 699 720 82  -
207 LOCK WASHER
B 6 DIN 127 FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATER PIPE 		002 -
208 HEX.-HD. SCREW
M 6X20 DIN 933-8 G FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATE 		002 -
209 FIXING CLAMP
FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINNDER HEAD, REAR 		001 A 18 999 500 07  -
RUBBER HOSE, 30 MM LONG
FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REAR
Zastąpiono przez: A  186 997 20 82 		- A 18 999 702 82  -
210 RUBBER HOSE, 30 MM LONG
FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REAR 		001 A 18 699 720 82  -
211 LOCK WASHER
B 6 DIN 127 FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REAR 		001 -
212 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REA 		001 -
213 HEX. NUT
M 6 DIN 934-5 S FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUNM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REAR 		001 -
215 FUEL PIPE
FOR CONNECTION AT FUEL FEED PUMP 		001 A 19 807 005 32  -
216 FUEL PIPE
FROM FUEL FEED PUMP TO FILTER 		001 A 18 907 002 32  -
REPLACED BY 189 070 03 32
THE SCREWED NIPPLE AT THE INJECTION PUMP HAS TO BE LAID TO THE INTERIOR SIDE UP TO ENGINE 8500282
Zastąpiono przez: A  189 070 03 32 		- A 19 907 001 32  -
FUEL PIPE
THE SCREWED NIPPLE AT THE INJECTION PUMP HAS TO BE LAID TO THE INTERIOR SIDE UP TO ENGINE 8500065
Zastąpiono przez: A  189 070 03 32 		- A 19 907 001 32  -
217 FUEL PIPE
FROM FILTER TO INJECTION PUMP FROM ENGINE 8500283 		- A 18 907 003 32  -
217 FUEL PIPE
FROM FILTER TO INJECTION PUMP FROM ENGINE 8500066 		- A 18 907 003 32  -
218 VACUUM PIPE
FROM MIXTURE CONTROLLER FLAP-TYPE TO INJECTION PUMP GOVERNOR 		001 A 18 907 000 32  -
219 RUBBER HOSE
12X18X260 MM LANG N 272 FOR AUXILIARY AIR PIPE FROM AIR FILTER TO INJECTION PUMP GOVERNOR ÔRDER BY THE METER 		001 -
220 HOSE CLAMP
S 18/9 ZY N 288 A FOR AUXILIARY AIR PIPE FROM AIR FILTER TO INJECTION PUMP GOVERNOR 		002 -
221 ANNULAR FITTING
FOR AUXILIARY AIR PIPE FROM AIR FILTER TO INJECTION PUMP GOVERNOR 		001 A 18 999 000 88  -
REPLACED BY
189 070 01 80 TOGETHER WITH 1 AUXILIARY AIR PIPE 189 070 02 80 2 BOX NUT 10 M 18X1,5 DIN 7606 1 RUBBER HOSE 12X18X80-MM 		- A 18 907 000 80  -
REPLACED BY
189 070 01 80 TOGETHER WITH 1 AUXILIARY AIR PIPE 189 070 02 80 2 BOX NUT 10 M 18X1,5 DIN 7606 1 RUBBER HOSE 12X18X80-MM 		- A 18 907 000 80  -
222 AUXILIARY AIR PIPE
TO INJECTION PUMP GOVERNOR FROM ENGINE 8500371 		- A 18 907 001 80  -
222 AUXILIARY AIR PIPE
TO INJECTION PUMP GOVERNOR FROM ENGINE 8500086 		- A 18 907 001 80  -
223 AUXILIARY AIR PIPE
FOR MIXTURE CONTROLLER, FLAP-TYPE FROM ENGINE 8500371 		- A 18 907 002 80  -
223 AUXILIARY AIR PIPE
FOR MIXTURE CONTROLLER, FLAP-TYPE FROM ENGINE 8500086 		- A 18 907 002 80  -
224 BOX NUT
10 M 18X1,5 DIN 7606 FOR AUXILIARY AIR PIPE AT MIXTURE CONTROLLER AND INJECTION PUMP GOVERNOR FROM ENGINE 8500371 		- -
224 BOX NUT
10 M 18X1,5 DIN 7606 FOR AUXILIARY AIR PIPE AT MIXTURE CONTROLLER AND INJECTION PUMP GOVERNOR FROM ENGINE 8500086 		- -
225 RUBBER HOSE
12X18X80 MM LANG N 272 FOR CONNECTION OF AUXILIARY AIR PIPE ORDER BY THE METER FROM ENGINE 8500371 		- -
225 RUBBER HOSE
12X18X80 MM LANG N 272 FOR CONNECTION OF AUXILIARY AIR PIPE ORDER BY THE METER FROM ENGINE 8500086 		- -
226 HOSE CLAMP
S 18/9 ZY N 288 A FOR CONNECTION OF AUXILIARY AIR PIPE FROM ENGINE 8500371 		- -
226 HOSE CLAMP
S 18/9 ZY N 288 A FOR CONNECTION OF AUXILIARY AIR PIPE FROM ENGINE 8500086 		- -
227 FIXING CLAMP
FOR AUXILIARY AIR PIPE AND VACUUM PIPE AT BRACKET, COOLING WATER PIPE 		001 A 18 999 500 42  -
228 HOSE
B 8X12X25 MM LANG DIN 73379 FOR AUXILIARY AIR PIPE AND VACUUM PIPE AT BRACKET, COOLING WATER PIPE ORDER BY THE METER 		001 -
229 LOCK WASHER
B 6 DIN 127 FOR AUXILIARY AIR PIPE AND VACUUM PIPE AT BRACKET, COOLING WATER PIPE 		001 -
230 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR AUXILIARY AIR PIPE AND VACUUM PIPE AT BRACKET, COOLING WATER PIPE 		001 -
235 BRACKET
FOR AIR PIPE 		001 A 18 909 000 41  -
236 PIPE CLAMP
FOR AIR PIPE 		001 A 18 999 501 07  -
237 HOSE
B 8X12X25 MM LANG DIN 73379 ORDER BY THE METER 		001 -
238 LOCK WASHER
B 6 DIN 127 FOR PIPE CLAMP AT BRACKET FOR AIR PIPE 		001 -
239 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR PIPE CLAMP AT BRACKET FOR AIR PIPE 		001 -
240 FIXING CLAMP
HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION TUBE SIDE 		- A 18 999 500 35  -
RUBBER HOSE, 30 MM LONG
HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION TUBE SIDE
Zastąpiono przez: A  186 997 20 82 		- A 18 999 702 82  -
241 RUBBER HOSE, 30 MM LONG
HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION TUBE SIDE 		001 A 18 699 720 82  -
242 HEX.-HD. SCREW
M 6X12 DIN 933-6 G HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTIO 		001 -
243 LOCK WASHER
B 6 DIN 127 HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION TUBE 		001 -
244 HEX. NUT
M 6 DIN 934-5 S HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION T 		001 -
DAMPING CONTAINER
FOR RETURN FLOW FROM OVERFLOW VALVE
Zastąpiono przez: A  189 070 03 68 		- A 18 907 001 68  -
245 DAMPING CONTAINER
FOR RETURN FLOW FROM OVERFLOW VALVE 		001 A 18 907 003 68  -
Aby dowiedzieć się, gdzie kupić przedmiot lub jego odpowiednika, kliknij na numerze katalogowym.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA