COVERING

EPC / Mercedes / 1 / FG / FG 198.042 / 69 / 040
‹ ›

№- Nazwa I* Numer części A

ANTISQUEAKS 		- XXX XXX XXX XXXX -
SEAL, MOLTOPREN,
10-MM THICK BETWEEN TUBULAR FRAME AND FRONT PANEL 60X280-MM ORDER BY THE METER 		002 A 00 098 301 98  -
SEAL, MOLTOPREN,
10-MM THICK BETWEEN TUBULAR FRAME AND FRONT PANEL 20X250-MM ORDER BY THE METER 		002 A 00 098 301 98  -
SEAL, MOLTOPREN,
10-MM THICK AS WASHERS, 25-MM DIA. X 70-MM DIA. ORDER BY THE METER 		NB A 00 098 301 98  -
ANTISQUEAK, MOLTOPREN,
5-MM THICK BETWEEN TUBULAR FRAME AND FRONT PANEL, 35X620-MM ORDER BY THE METER 		001 A 00 098 300 98  -
ANTISQUEAK, MOLTOPREN,
5-MM THICK FOR PROPELLER SHAFT, 450X700-MM ORDER BY THE METER 		001 A 00 098 300 98  -
ANTISQUEAK, WAFFLE
FACED FELT, 10-MM THICK FOR FLOOR, LEFT AND RIGHT, 400X700-MM ORDER BY THE METER 		002 A 00 098 322 92  -
ANTISQUEAK, WAFFLE
FACED FELT, 10-MM THICK BEHIND INSTRUMENT PANEL ORDER BY THE METER 		NB A 00 098 322 92  -
ANTISQUEAK, BITUMINIZED
FELT CARDBOARD, 3-MM THICK FOR SPARE WHEEL RECESS ORDER BY THE METER 		001 A 00 098 329 91  -
ANTISQUEAK, BITUMINIZED
FELT CARDBOARD, 3-MM THICK FOR FRONT FLOOR, LEFT AND RIGHT ORDER BY THE METER 		002 A 00 098 329 91  -
ANTISQUEAK, BITUMINIZED
FELT CARDBOARD, 3-MM THICK FOR LUGGAGE COMPARTMENT FLOOR COVER ORDER BY THE METER 		001 A 00 098 329 91  -
ANTISQUEAK, BITUMINIZED
FELT CARDBOARD, 3-MM THICK FOR FRONT FLOOR, BOTTOM, LEFT AND RIGHT ORDER BY THE METER 		002 A 00 098 329 91  -
ANTISQUEAK, BITUMINIZED
FELT CARDBOARD, 3-MM THICK FOR FRONT FLOOR, FRONT, LEFT AND RIGHT ORDER BY THE METER 		002 A 00 098 329 91  -
ANTISQUEAK, WOOL
FELT, BLACK, 6-MM THICK FOR LUGGAGE COMPARTMENT FLOOR, REAR ORDER BY THE METER 		001 A 00 098 303 92  -
ANTISQUEAK, WOOL
FELT, BLACK, 6-MM THICK FOR LUGGAGE COMPARTMENT FLOOR REAR PANEL ORDER BY THE METER 		001 A 00 098 303 92  -
ANTISQUEAK, WOOL
FELT, BLACK, 6-MM THICK FOR WHEELHOUSE, REAR, LEFT ORDER BY THE METER 		001 A 00 098 303 92  -
ANTISQUEAK, WOOL
FELT, BLACK, 6-MM THICK FOR WHEELHOUSE, FRONT, LEFT AND RIGHT ORDER BY THE METER 		002 A 00 098 303 92  -
ANTISQUEAK, WOOL
FELT, BLACK, 6-MM THICK FOR FUEL PUMP ORDER BY THE METER 		001 A 00 098 303 92  -
ANTISQUEAK, WOOL
FELT, BLACK, 6-MM THICK FOR WHEELHOUSE, RIGHT ORDER BY THE METER 		001 A 00 098 303 92  -
ANTISQUEAK, WOOL
FELT, BLACK, 6-MM THICK FOR WHEELHOUSE, FLOOR, RIGHT ORDER BY THE METER 		001 A 00 098 303 92  -
ANTISQUEAK, WOOL
FELT, BLACK, 6-MM THICK FOR WHEELHOUSE, FRONT, OUTSIDE ORDER BY THE METER 		001 A 00 098 303 92  -
ANTISQUEAK, FLOXAN
FOR LUGGAGE COMPARTMENT FLOOR, REAR ORDER BY THE METER 		001 A 00 098 340 87  -
ANTISQUEAK, FLOXAN
FOR LUGGAGE COMPARTMENT REAR PANEL ORDER BY THE METER 		001 A 00 098 340 87  -
ANTISQUEAK, FLOXAN
FOR WHEELHOUSE, LEFT, REAR ORDER BY THE METER 		001 A 00 098 340 87  -
ANTISQUEAK, FLOXAN
FOR WHEELHOUSE, FRONT, LEFT AND RIGHT ORDER BY THE METER 		002 A 00 098 340 87  -
ANTISQUEAK, FLOXAN
FOR FUEL PUMP ORDER BY THE METER 		001 A 00 098 340 87  -
ANTISQUEAK, FLOXAN
FOR WHEELHOUSE, RIGHT, OUTSIDE ORDER BY THE METER 		001 A 00 098 340 87  -
SEAL, MOLTOPREN,
80X100X500-MM FOR ENTRANCE SILLS, REAR WHEELHOUSES 		002 A 19 868 201 40  -
COVERING, HAND BRAKE
Zastąpiono przez: A  198 680 00 06 		- A 42 198 680 00 06 -
001 COVERING, HAND BRAKE 001 A 19 868 000 06  -
HEX. HEAD SCREW
M 5X10 DIN 933-8 G HAND BRAKE COVERING TO FRONT FLOOR 		005 -
LOCK WASHER
B 5 DIN 127 HAND BRAKE COVERING TO FRONT FLOOR 		005 -
HEX. NUT
M 5 DIN 934-5 S HAND BRAKE COVERING TO FRONT FLOOR 		004 -
WASHER
5,3 DIN 125 HAND BRAKE COVERING TO FRONT FLOOR 		001 -
002 COVER OVER BATTERY
BEHIND RIGHT SEAT 		001 A 42 198 680 00 39 -
COUNTERSUNK SCREW
A M 5X15 DIN 87 COVER TO FLOOR ABOVE REAR AXLE 		002 -
003 INSPECTION HOLE COVER
FOR TRANSMISSION COVER PLATE 		001 A 40 198 683 04 14 -
FELT STRIP, 400 MM LONG
FOR INSPECTION HOLE COVER ORDER BY THE METER 		001 A 00 098 328 10  -
LENS HEAD SCREW
A M 6X15 DIN 7985 INSPECTION HOLE COVER TO TRANSMISSION COVER PLATE 		003 -
LOCK WASHER
B 6 DIN 127 INSPECTION HOLE COVER TO TRANSMISSION COVER PLATE 		003 -
005 CAGE CLIP WITH NUT
INSPECTION HOLE COVER TO TRANSMISSION COVER PLATE 		003 A 00 099 022 91  -
006 PLUG
FOR LUGGAGE COMPARTMENT 		004 A 13 698 401 52  -

TRANSMISSION COVER PLATE 		- XXX XXX XXX XXXX -
010 TRANSMISSION COVER PLATE 001 A 42 198 680 01 36 -
ANTISQUEAK, BITUMINIZED
FELT CARDBOARD, 3-MM THICK FOR TRANSMISSION COVER PLATE ORDER BY THE METER 		001 A 00 098 329 91  -
ANTISQUEAK, WAFFLE
FACED FELT, 10-MM THICK FOR TRANSMISSION COVER PLATE ORDER BY THE METER 		001 A 00 098 322 92  -
011 CARPET
FOR TRANSMISSION COVER PLATE 		001 A 42 198 680 00 38 -
012 BALL, RIGHT SIDE
PUSH BUTTON, LOWER PART CARPET TO TRANSMISSION COVER PLATE 		002 A 13 698 809 81  -
LENS HEAD
SHEET METAL SCREW B 2,9X13 DIN 7981 BALL TO TRANSMISSION COVER PLATE 		002 -
013 MOSS TYPE
RUBBER CORD, 10-MM DIA., 3,200-MM LONG TRANSMISSION COVER PLATE TO FRONT PANEL ORDER BY THE METER 		001 A 00 098 702 33  -
LENS HEAD SCREW
A M 6X15 DIN 7985 TRANSMISSION COVER PLATE TO FRONT PANEL 		014 -
WASHER
TRANSMISSION COVER PLATE TO FRONT PANEL 		014 A 00 098 403 55  -
LOCK WASHER
B 6 DIN 127 TRANSMISSION COVER PLATE TO FRONT PANEL 		014 -
PAD, MOLTOPREN,
30X10X50-MM TRANSMISSION COVER PLATE TO FRONT PANEL
Zastąpiono przez: A  000 983 01 98 		- A 00 098 328 10  -
PAD, MOLTOPREN,
30X10X50-MM TRANSMISSION COVER PLATE TO FRONT PANEL ORDER BY THE METER 		001 A 00 098 301 98  -
TEROSTATE CORD,
3X20X550-MM TRANSMISSION COVER PLATE TO FRONT PANEL ORDER BY THE METER 		NB A 00 098 953 85  -

Zastąpiono przez: A  000 983 26 87 		- A 42 198 684 01 02 -
RUBBER MAT, 500X1,000 MM
FOR FRONT FLOOR, LEFT AND RIGHT
Zastąpiono przez: A  000 983 26 87 		- A 42 198 684 02 02 -
015 RUBBER MAT, 500X1,000 MM
FOR FRONT FLOOR, LEFT AND RIGHT ORDER BY THE METER 		002 A 00 098 326 87  -
BUTTON
RUBBER MATS TO FLOOR
Zastąpiono przez: A  000 988 14 80 		- A 00 098 822 80  -
017 BUTTON
RUBBER MATS TO FLOOR 		006 A 00 098 814 80  -
LENS HEAD
COUNTERSUNK SHEET METAL SCREW B 4,2X19 DIN 7983 DBL 8451-21 RUBBER MATS TO FLOOR 		006 -
018 BUTTON
RUBBER MATS TO FLOOR 		002 A 00 098 823 80  -
LENS HEAD
COUNTERSUNK SHEET METAL SCREW B 4,2X32 DIN 7983 DBL 8451-21 RUBBER MATS TO FLOOR 		002 -
COVER FOR
PROPELLER SHAFT COVERING LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
COVER FOR
FRONT PANEL, LATERAL, LEFT AND RIGHT LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
COVER FOR SEAT BOXES
LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
COVER FOR
LEFT AND RIGHT SEAT BOXES, LATERAL LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
COVER FOR
LEFT AND RIGHT COVER PLATES, FRONT PANEL LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
022 CARPET, BEHIND LEFT SEAT 001 A 42 198 680 01 44 -
023 CARPET, BEHIND RIGHT SEAT 001 A 42 198 680 02 44 -
024 CARPET, LEFT SEAT BOX 001 A 42 198 680 03 44 -
025 CARPET, RIGHT SEAT BOX 001 A 42 198 680 04 44 -
CARPET IN
Zastąpiono przez: A  198 680 00 42 		- A 42 198 680 01 42 -
026 CARPET IN 001 A 19 868 000 42  -
027 BALL
CARPET TO LUGGAGE COMPARTMENT FLOOR 		004 A 13 698 809 81  -
LENS HEAD
SHEET METAL SCREW B 2,9X13 DIN 7981 CARPET TO LUGGAGE COMPARTMENT FLOOR 		004 -
COVER FRONT,
LEFT AND RIGHT ENTRANCES LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
COVER REAR,
LEFT AND RIGHT ENTRANCES LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
COVER CENTER,
LEFT AND RIGHT ENTRANCES LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
COVER INSIDE,
LEFT AND RIGHT LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
INTERMEDIATE LAYER,
MOLTOPREN, 5X400X1,400-MM FOR ENTRANCES ORDER BY THE METER 		002 A 00 098 300 98  -
INTERMEDIATE LAYER,
MOLTOPREN, 10X30X130-MM BETWEEN COLLAPSIBLE TOP SUPPORTS AND ENTRANCE SILLS 		002 A 42 198 686 03 92 -

COVER PLATES 		- XXX XXX XXX XXXX -
030 COVER PLATE, LEFT
AT FRONT PANEL, LATERAL, LEFT AND RIGHT, WITH HEATING CONNECTION FITTINGS 		001 A 42 198 680 01 06 -
031 COVER PLATE, RIGHT
AT FRONT PANEL, LATERAL, LEFT AND RIGHT, WITH HEATING CONNECTION FITTINGS 		001 A 42 198 680 02 06 -
CAGE CLIP WITH NUT
COVER PLATES TO FRONT PANEL 		020 A 00 099 022 91  -
LENS HEAD
COUNTERSUNK SCREW, CHROMIUM PLATED A M 6X20 DIN 7988 VERCHROMT COVER PLATES TO FRONT PANEL 		020 -
COUNTERSUNK WASHER,
CHROMIUM PLATED 6 N 56 B VERCHROMT COVER PLATES TO FRONT PANEL 		020 -
COVER PLATE, TOP, LEFT
AT FRONT PANEL NO LONGER SUPPLIED AS SPARE PARTS 		- A 42 198 687 05 06 -
COVER PLATE, TOP, RIGHT
AT FRONT PANEL NO LONGER SUPPLIED AS SPARE PARTS 		- A 42 198 687 06 06 -
FELT STRIP, 2X20X140 MM
INTERMEDIATE LAYER FOR COVER PLATES NO LONGER INSTALLED 		- A 00 098 316 10  -
PAD, MOLTOPREN,
10X20X210-MM FOR COVER PLATES ORDER BY THE METER 		002 A 00 098 301 98  -
CAGE CLIP WITH NUT
TOP COVER PLATES TO FRONT PANEL 		008 A 00 099 022 91  -
HEX. HEAD SCREW
M 6X15 DIN 933-8 G TOP COVER PLATES TO FRONT PANEL 		008 -
034 INSPECTION HOLE COVER
FOR HYDRO-VAC 		001 A 42 198 680 00 78 -
LENS HEAD
COUNTERSUNK SCREW, CHROMIUM PLATED A M 6X20 DIN 7988 VERCHROMT INSPECTION HOLE COVER TO FRONT PANEL 		005 -
COUNTERSUNK WASHER,
CHROMIUM PLATED 6 N 56 B VERCHROMT INSPECTION HOLE COVER TO FRONT PANEL 		005 -
CAGE CLIP WITH NUT
INSPECTION HOLE COVER TO FRONT PANEL 		005 A 00 099 022 91  -
035 CUP
FOR PEDAL SEALING 		002 A 10 186 687 00 37 -
35a SEAL WASHER
FOR PEDAL SEALING CUPS 		002 A 13 629 000 67  -
LENS HEAD
SHEET METAL SCREW B 3,5X9,5 DIN 7981 CUPS AND SEAL WASHERS TO TOEBOARD 		006 -
036 COVER PLATE,
LEFT, AT FRONT PANEL PILLAR SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED 		001 A 42 198 687 01 08 -
037 COVER PLATE,
RIGHT, AT FRONT PANEL PILLAR SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED 		001 A 42 198 687 02 08 -
LENS HEAD
COUNTERSUNK SHEET METAL SCREW, CHROMIUM PLATED B 3,9X16 DIN 7983 VERCHROMT COVER PLATES TO FRONT PANEL PILLARS 		006 -
038 CONNECTING ANGLE, LEFT
COVERING TO FRONT PANEL 		001 A 40 198 687 01 12 -
039 CONNECTING ANGLE, RIGHT
COVERING TO FRONT PANEL 		001 A 40 198 687 02 12 -
FELT STRIP, 2X18X310 MM
INTERMEDIATE LAYER FOR CONNECTING ANGLES ORDER BY THE METER 		002 A 00 098 321 10  -
COUNTERSUNK SHEET
METAL SCREW B 2,9X6,5 DIN 7982 CONNECTING ANGLES TO FRONT PANEL 		008 -
040 CONNECTION FITTING, LEFT
AT FRONT PANEL AND DISTRIBUTOR 		001 A 40 198 687 01 09 -
FELT STRIP, 2X18X120 MM
INTERMEDIATE LAYER FOR CONNECTION FITTING ORDER BY THE METER 		001 A 00 098 321 10  -
LENS HEAD
SHEET METAL SCREW B 3,9X13 DIN 7981 CONNECTION FITTING TO FRONT PANEL AND DISTRIBUTOR 		005 -
041 COVERING LEFT,
AT FRONT PANEL 		001 A 40 198 687 03 09 -
FELT STRIP, 2X18X720 MM
INTERMEDIATE LAYER FOR LEFT COVERING ORDER BY THE METER 		001 A 00 098 321 10  -
LENS HEAD
SHEET METAL SCREW B 3,9X13 DIN 7981 COVERING TO FRONT PANEL 		008 -
CONNECTION FITTING, RIGHT
AT FRONT PANEL AND DISTRIBUTOR NO LONGER SUPPLIED AS SPARE PARTS 		- A 42 198 680 00 14 -
COVERING, RIGHT,
AT FRONT PANEL NO LONGER SUPPLIED AS SPARE PARTS 		- A 42 198 680 01 14 -
PAD, MOLTOPREN,
10X35X70-MM FOR CONNECTION FITTING ORDER BY THE METER 		001 A 00 098 301 98  -
FELT STRIP, 2X18X620 MM
INTERMEDIATE LAYER FOR CONNECTION FITTING ORDER BY THE METER 		002 A 00 098 321 10  -
LENS HEAD
SHEET METAL SCREW B 3,9X13 DIN 7981 CONNECTION FITTING TO FRONT PANEL 		005 -
LENS HEAD
COUNTERSUNK SHEET METAL SCREW B 3,9X9,5 DIN 7983 COVERING TO FRONT PANEL 		008 -
044 SEAL, 1,070 MM LONG
FOR FRONT PANEL, TRANSMISSION COVER PLATE ORDER BY THE METER 		001 A 00 098 758 30  -
045 MOUNTING RAIL,
FOR SEAL 		001 A 40 198 687 00 32 -
REPLACED BY
A 4X13X12 DIN 7331 SEAL TO FRONT PANEL 		- A 00 099 018 95  -
HOLLOW RIVET
A 4X13X12 DIN 7331 SEAL TO FRONT PANEL 		020 -
046 APRON
FOR LEFT WHEELHOUSE RUBBER WITH FABRIC LINING 		001 A 40 198 687 01 65 -
047 APRON
FOR RIGHT WHEELHOUSE RUBBER WITH FABRIC LINING 		001 A 40 198 687 02 65 -
REPLACED BY
A 4X13X12 DIN 7331 		- A 00 099 013 95  -
HOLLOW RIVET
A 4X13X12 DIN 7331 APRONS TO WHEELHOUSES 		026 -
048 RUBBER SLEEVE, BLACK
FOR LEFT AND RIGHT COWL STRUTS OPTIONAL 		002 A 30 188 775 00 31 -
RUBBER SLEEVE, STONE-GREY
FOR LEFT AND RIGHT COWL STRUTS OPTIONAL 		002 A 30 188 775 01 31 -
PAD MOLTOPREN,
5X280X1,400-MM FOR CROSS BAR ORDER BY THE METER 		001 A 00 098 300 98  -
PAD MOLTOPREN,
5X25X350-MM FOR FRONT PANEL, LATERAL ORDER BY THE METER 		002 A 00 098 300 98  -
PAD, FOAM
RUBBER, 15X30X650-MM FOR FRONT PANEL, TOP ORDER BY THE METER 		002 A 00 098 307 98  -
PAD, MOLTOPREN,
10X90X960-MM FOR FRONT PANEL, TOP ORDER BY THE METER 		001 A 00 098 301 98  -
COVER FOR
CROSS BAR, INSIDE LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
COVER FOR
CROSS BAR, OUTSIDE LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
COVER FOR
FRONT PANEL, LATERAL, LEFT AND RIGHT LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
COVER FOR
FRONT PANEL, TOP LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
COVER FOR
INSTRUMENT PANEL, BOTTOM LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
049 WINDSHIELD COVERING, TOP
SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED 		001 A 42 198 688 00 40 -
050 WINDSHIELD COVERING,
BOTTOM SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED 		001 A 42 198 688 00 42 -
051 WINDSHIELD COVERING,
LATERAL, LEFT SUPPLIED NON-CHROMIUMPLATED, MUST BE ADAPTED 		001 A 42 198 688 01 41 -
052 WINDSHIELD COVERING,
LATERAL, RIGHT SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED 		001 A 42 198 688 02 41 -
COUNTERSUNK SHEET
METAL SCREW, CHROMIUM PLATED B 2,9X9,5 DIN 7982 VERCHROMT FOR WINDSHIELD COVERING TO FRONT PANEL FRAME AND TO CROSS BAR 		020 -
WATER CHANNEL,
LEFT, AT WINDSHIELD FRAME SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED
Zastąpiono przez: A 42 198 680 01 69 		- A 42 198 688 01 69 -
053 WATER CHANNEL,
LEFT, AT WINDSHIELD FRAME SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED 		001 A 42 198 680 01 69 -
WATER CHANNEL,
RIGHT, AT WINDSHIELD FRAME SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED
Zastąpiono przez: A 42 198 680 02 69 		- A 42 198 688 02 69 -
054 WATER CHANNEL,
RIGHT, AT WINDSHIELD FRAME SUPPLIED NON-CHROMIUM-PLATED, MUST BE ADAPTED 		001 A 42 198 680 02 69 -
COUNTERSUNK SHEET
METAL SCREW, CHROMIUM PLATED B 2,9X9,5 DIN 7972 VERCHROMT WATER CHANNELS TO WINDSHIELD FRAME 		004 -
RUBBER SECTION,
50-MM LONG BETWEEN WATER CHANNELS AND WINDSHIELD FRAME, TOP ORDER BY THE METER 		002 A 00 098 703 36  -
058 INSTRUMENT PANEL, 001 A 42 198 689 01 88 -
REPLACED BY
198 680 01 90 TOGETHER WITH 1 GARNISH MOULDING 198 689 00 71 1 STEERING LOCK 000 462 26 30 MOVE BLOWER SWITCH INTO HOLE 		- A 42 198 680 03 90 -
059 INSTRUMENT PANEL, 001 A 19 868 001 90  -
LENS HEAD SCREW
A M 4X12 DIN 7985 UPPER PART OF INSTRUMENT PANEL TO LOWER PART OF INSTRUMENT PANEL 		004 -
LOCK WASHER
B 4 DIN 127 DBL 8451-11 UPPER PART OF INSTRUMENT PANEL TO LOWER PART OF INSTRUMENT PANEL 		004 -
HEX. NUT
M 4 DIN 934-5 S DBL 8451-21 UPPER PART OF INSTRUMENT PANEL TO LOWER PART OF INSTRUMENT PANEL 		004 -
COVER FOR
GLOVE COMPARTMENT BOTTOM, LEFT AND RIGHT LEATHER ORDER BY THE METER 		002 A 00 098 302 84  -
COVER FOR
GLOVE COMPARTMENT JACKET LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
COVER FOR
COMBINATION INSTRUMENT, INSIDE LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
060 RUBBER PAD
FOR INSTRUMENT PANEL, BOTTOM NO LONGER SUPPLIED AS A SPARE PART 		- A 42 198 689 00 79 -
062 EXPANSION PLUG
FOR GLOVE COMPARTMENT, LEFT 		002 A 00 098 709 44  -
063 GARNISH MOULDING
AT INSTRUMENT PANEL 		001 A 42 198 689 00 71 -
064 GARNISH MOULDING,
LEFT, TOP AT INSTRUMENT PANEL 		001 A 42 198 689 01 71 -
065 GARNISH MOULDING,
RIGHT, TOP RIGHT, BESIDE GLOVE COMPARTMENT LID AT INSTRUMENT PANEL 		001 A 42 198 689 02 71 -
066 GARNISH MOULDING,
LEFT, CENTER AT INSTRUMENT PANEL 		001 A 42 198 689 03 71 -
067 GARNISH MOULDING,
RIGHT, CENTER AT INSTRUMENT PANEL 		001 A 42 198 689 04 71 -
GARNISH MOULDING,
LEFT, BOTTOM FOR OPERATING KNOBS AT INSTRUMENT PANEL 		001 A 42 198 689 05 71 -
068 GARNISH MOULDING,
LEFT, BOTTOM FOR OPERATING KNOBS AT INSTRUMENT PANEL 		001 A 19 868 900 71  -
069 GARNISH MOULDING,
RIGHT, BOTTOM BELOW GLOVE COMPARTMENT LID 		001 A 42 198 689 06 71 -
SQUARE HEAD SCREW
GARNISH MOULDINGS TO INSTRUMENT PANEL
Zastąpiono przez: A  000 990 37 33 		- A 00 099 017 33  -
070 SQUARE HEAD SCREW
GARNISH MOULDINGS TO INSTRUMENT PANEL 		004 A 00 099 037 33  -
071 SQUARE HEAD SCREW
GARNISH MOULDINGS TO INSTRUMENT PANEL 		018 A 00 099 018 33  -
072 SQUARE HEAD SCREW
GARNISH MOULDINGS TO INSTRUMENT PANEL 		010 A 00 099 015 33  -
WASHER
A 3,2 DIN 9021 DBL 8451-11 GARNISH MOULDINGS TO INSTRUMENT PANEL 		032 -
LOCK WASHER
B 3 DIN 127 DBL 8451-11 GARNISH MOULDINGS TO INSTRUMENT PANEL 		032 -
HEX. NUT
M 3 DIN 934-5 S DBL 8451-21 GARNISH MOULDINGS TO INSTRUMENT PANEL 		032 -
073 GLOVE COMPARTMENT LID 001 A 42 198 680 00 96 -
074 GARNISH MOULDING 001 A 42 198 689 08 71 -
SQUARE HEAD SCREW
CENTER GARNISH MOULDING TO OUTER PLATE 		003 A 00 099 018 33  -
WASHER
A 3,2 DIN 9021 DBL 8451-11 CENTER GARNISH MOULDING TO OUTER PLATE 		003 -
LOCK WASHER
B 3 DIN 127 DBL 8451-11 CENTER GARNISH MOULDING TO OUTER PLATE 		003 -
HEX. NUT
M 3 DIN 934-5 S DBL 8451-21 CENTER GARNISH MOULDING TO OUTER PLATE 		003 -
075 LOCK FOR
TYPE DESIGNATION AT INSTRUMENT PANEL SEE GROUP 81 FOR GLOVE COMPARTMENT LID WITH GOLD-PLATED KEY STATE NUMBER OF LOCK WH 		001 A 42 198 766 02 26 -
COUNTERSUNK SHEET
METAL SCREW B Z 2,9X6,5 DIN 7972 INNER PLATE TO OUTER PLATE 		004 -
076 GARNISH MOULDING, TOP
FOR GLOVE COMPARTMENT LID; NARROW 		001 A 42 198 689 07 71 -
SQUARE HEAD SCREW
GARNISH MOULDING TO COVER 		004 A 00 099 015 33  -
WASHER
A 3,2 DIN 9021 DBL 8451-11 GARNISH MOULDING TO COVER 		004 -
LOCK WASHER
B 3 DIN 127 DBL 8451-11 GARNISH MOULDING TO COVER 		004 -
HEX. NUT
M 3 DIN 934-5 S DBL 8451-21 GARNISH MOULDING TO COVER 		004 -
077 GLOVE COMPARTMENT
HINGE, LEFT HINGES ARE SUPPLIED UNMOUNTED, THEY MUST BE ADAPTED TO CAR 		001 A 42 198 680 01 87 -
078 GLOVE COMPARTMENT
HINGE, RIGHT HINGES ARE SUPPLIED UNMOUNTED, THEY MUST BE ADAPTED TO CAR 		001 A 42 198 680 02 87 -
COUNTERSUNK SCREW
A M 4X10 DIN 7987 HINGES TO LID 		004 -
COUNTERSUNK SCREW
A M 4X10 DIN 7987 HINGES TO GLOVE COMPARTMENT BOTTOM 		004 -
LOCK WASHER
B 4 DIN 127 HINGES TO GLOVE COMPARTMENT BOTTOM 		004 -
HEX. NUT
M 4 DIN 934-5 S HINGES TO GLOVE COMPARTMENT BOTTOM 		004 -
079 GUIDE FORK 001 A 10 186 689 02 33 -
080 GUIDE FORK 001 A 10 186 689 00 33 -
081 PRESSURE SPRING 001 A 18 699 320 01  -
LENS HEAD
SCREW, CHROMIUM PLATED A M 4X20 DIN 7985 VERCHROMT INSTRUMENT PANEL TO CROSS BAR 		003 -
TOOTHED WASHER
A 4,3 DIN 6797 INSTRUMENT PANEL TO CROSS BAR 		003 -
HEX. NUT
M 4 DIN 934-5 S INSTRUMENT PANEL TO CROSS BAR 		003 -
LENS HEAD
SHEET METAL SCREW, CHROMIUM PLATED B 3,9X12 DIN 7981 VERCHROMT INSTRUMENT PANEL TO CROSS BAR 		001 -
LENS HEAD
COUNTERSUNK SHEET METAL SCREW, CHROMIUM PLATED B 4,8X19 DIN 7983 VERCHROMT INSTRUMENT PANEL TO CROSS BAR 		002 -

COVERING 		- XXX XXX XXX XXXX -
INSPECTION HOLE COVER
FOR AUXILIARY FUEL PUMP NO LONGER SUPPLIED AS SPARE PARTS 		- A 42 198 693 00 27 -
INSPECTION HOLE COVER
FOR AUXILIARY FUEL PUMP NO LONGER SUPPLIED AS SPARE PARTS 		- A 42 198 693 02 27 -
LENS HEAD SCREW
A M 6X15 DIN 7985 INSPECTION HOLE COVER TO LATERAL TAIL PART, INSIDE 		007 -
LENS HEAD SCREW
A M 6X15 DIN 7985 INSPECTION HOLE COVER TO LATERAL TAIL PART, INSIDE 		008 -
WASHER
6,4 DIN 125 INSPECTION HOLE COVER TO LATERAL TAIL PART, INSIDE 		007 -
WASHER
6,4 DIN 125 INSPECTION HOLE COVER TO LATERAL TAIL PART, INSIDE 		008 -
LOCK WASHER
B 6 DIN 127 INSPECTION HOLE COVER TO LATERAL TAIL PART, INSIDE 		007 -
LOCK WASHER
B 6 DIN 127 INSPECTION HOLE COVER TO LATERAL TAIL PART, INSIDE 		008 -
SEAL, MOSS
TYPE RUBBER, 3X20X1, 120-MM INSPECTION HOLE COVER TO LATERAL TAIL PART, INSIDE ORDER BY THE METER 		001 A 00 098 701 14  -
INSPECTION HOLE COVER
FOR ACCESS TO TANK IN LUGGAGE COMPARTMENT, LEFT NO LONGER SUPPLIED AS A SPARE PART 		- A 42 198 693 01 27 -
COUNTERSUNK SCREW
A M 6X15 DIN 7987 INSPECTION HOLE COVER TO LUGGAGE COMPARTMENT FLOOR 		004 -
SEAL, MOSS
TYPE RUBBER, 6-MM DIA., 860-MM LONG INSPECTION HOLE COVER TO LUGGAGE COMPARTMENT FLOOR ORDER BY THE METER 		001 A 00 098 703 33  -
COVER PLATE
FOR COLLAPSIBLE TOP SUPPORTS AND TORSION BARS IN LUGGAGE COMPARTMENT NO LONGER SUPPLIED AS A SPARE PART 		- A 42 198 690 00 35 -
RUBBER SECTION,
380-MM LONG TO SEAL FUEL FILLER NECK ORDER BY THE METER 		001 A 00 098 710 36  -
CYLINDRICAL HEAD
SHEET METAL SCREW B 3,5X6,5 DIN 7971 COVER PLATE TO REAR PANEL, COLLAPSIBLE TOP CASE 		004 -
LENS HEAD SCREW
A M 4X12 DIN 7985 COVER PLATE TO REAR PANEL, COLLAPSIBLE TOP CASE 		004 -
LOCK WASHER
B 4 DIN 127 COVER PLATE TO REAR PANEL, COLLAPSIBLE TOP CASE 		004 -
COVER FOR
TAIL, LATERAL, LEFT AND RIGHT LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
COVER FOR TAIL, CENTER
LEATHER ORDER BY THE METER 		001 A 00 098 302 84  -
ANTISQUEAK, MOLTOPREN,
10-MM FOR COLLAPSIBLE TOP BRACKET ORDER BY THE METER 		001 A 00 098 301 98  -
COVERING, PLATIC
WITH MOLTOPREN FOR COLLAPSIBLE TOP CASE BOTTOM ORDER BY THE METER 		001 A 00 098 344 86  -
089 COVER PLATE
FOR COUPÉ ROOF TENSION LOCK TO TAIL, LATERAL, LEFT AND RIGHT 		002 A 19 879 502 30  -
090 THREADED PLATE
FOR COUPÉ ROOF TENSION LOCK TO TAIL, LATERAL, LEFT AND RIGHT 		002 A 19 879 503 11  -
LENS HEAD
COUNTERSUNK SCREW, CHROMIUM PLATED A M 5X12 DIN 7988 VERCHROMT COVER PLATES AND THREADED PLATES TO TAIL INTERIOR PLATE 		004 -
COVER, COLLAPSIBLE
Zastąpiono przez: A 42 198 690 01 42 		- A 42 198 690 00 42 -
091 COVER, COLLAPSIBLE 001 A 42 198 690 01 42 -
092 BALL
COVER TO COLLAPSIBLE TOP CASE 		006 A 13 698 809 81  -
LENS HEAD
SHEET METAL SCREW B 2,9X6,5 DIN 7981 COVER TO COLLAPSIBLE TOP CASE 		006 -
COVER, WOOL
FELT, BLACK, 6X60X250-MM FOR STOP ORDER BY THE METER 		002 A 00 098 303 92  -
COVER, PLASTIC
FOIL WITH MOLTOPREN, 286X515-MM FOR COVER OVER BATTERY ORDER BY THE METER 		001 A 00 098 344 86  -
095 GARNISH MOULDING,
LEFT, TOP AT SIDE PANEL AIR OUTLET 		001 A 42 198 690 01 80 -
096 GARNISH MOULDING,
RIGHT, TOP AT SIDE PANEL AIR OUTLET 		001 A 42 198 690 02 80 -
097 GARNISH MOULDING,
LEFT, BOTTOM AT SIDE PANEL AIR OUTLET 		001 A 42 198 690 03 80 -
098 GARNISH MOULDING,
RIGHT, BOTTOM AT SIDE PANEL AIR OUTLET 		001 A 42 198 690 04 80 -
HEX. NUT
M 4 DIN 934-5 S GARNISH MOULDINGS TO SIDE PANEL AIR OUTLETS 		004 -
WASHER
4,3 DIN 125 GARNISH MOULDINGS TO SIDE PANEL AIR OUTLETS 		004 -
LOCK WASHER
B 4 DIN 127 GARNISH MOULDINGS TO SIDE PANEL AIR OUTLETS 		004 -
099 GARNISH MOULDING
AT SIDE PANELS, BOTTOM 		002 A 40 198 698 05 80 -
ATTACHING SCREW, REAR 002 A 40 198 690 03 71 -
100 ATTACHING SCREW, REAR 002 A 19 869 000 71  -
ATTACHING SCREW, FRONT 002 A 40 198 690 02 71 -
101 ATTACHING SCREW, FRONT 002 A 19 869 001 71  -
102 BRACKET
FOR GARNISH MOULDINGS 		010 A 40 198 698 00 14 -
103 MOUNTING CLIP
FOR GARNISH MOULDINGS 		010 A 00 098 838 78  -
104 GARNISH MOULDING,
BOTTOM, REAR, LEFT 		001 A 42 198 698 05 80 -
105 GARNISH MOULDING,
BOTTOM, REAR, RIGHT 		001 A 42 198 698 06 80 -
106 ATTACHING SCREW 008 A 42 198 690 00 71 -
HEX. NUT
M 5 DIN 934-5 S GARNISH MOULDINGS TO SIDE PANELS 		012 -
LOCK WASHER
B 5 DIN 127 GARNISH MOULDINGS TO SIDE PANELS 		012 -
107 COVER RAIL
AT LEFT AND RIGHT ENTRANCES, BOTTOM 		002 A 42 198 698 00 67 -
108 COVER RAIL, LEFT
AT ENTRANCE, REAR 		001 A 42 198 698 01 67 -
109 COVER RAIL, RIGHT
AT ENTRANCE, REAR 		001 A 42 198 698 02 67 -
COUNTERSUNK SHEET
METAL SCREW, CHROMIUM PLATED B 2,9X6,5 DIN 7982 VERCHROMT COVER RAILS TO ENTRANCES 		022 -
Aby dowiedzieć się, gdzie kupić przedmiot lub jego odpowiednika, kliknij na numerze katalogowym.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA