ELECTRICAL EQUIPMENT AND INSTRUMENTS

EPC / Mercedes / 1 / FG / FG 120.011 / 54 / 033
‹ ›

№- Nazwa I* Numer części A

BATTERY, STARTER CABLE 		- XXX XXX XXX XXXX -
001 LEAD BATTERY 12 V 001 A 00 054 146 01  -
LEAD BATTERY 12 V
SPECIAL REQUEST (TROPICAL DESIGN) 		001 A 00 054 112 01  -
002 FIXING FRAME 001 A 12 154 001 23  -
003 TIGHTENING SCREW
FOR FIXING OF BATTERY 		002 A 12 054 101 24  -
LOCK WASHER
B 6 DIN 127 FOR FIXING OF BATTERY 		002 -
HEX. NUT
M 6 DIN 934-5 S FOR FIXING OF BATTERY 		002 -
RUBBER HOSE, 20 MM LONG
OVER ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER 		002 A 00 098 705 32  -
004 RUBBER PLUG
FOR BLIND HOLE IN FRONT WALL AND SUPPORTING RAIL 		006 A 00 098 703 15  -
STARTER CABLE
FROM POS. POLE TO STARTER MOTOR
Zastąpiono przez: A  128 540 00 30 		- A 18 054 000 30  -
006 STARTER CABLE
FROM POS. POLE TO STARTER MOTOR 		001 A 12 854 000 30  -
STARTER CABLE
FROM POS. POLE TO STARTER MOTOR 		001 A 12 154 001 30  -
007 RUBBER PROTECTIVE CAP
FOR STARTER CABLE 		001 A 13 654 600 35  -
008 GROUND CABLE
FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING 		001 A 18 054 000 31  -
GROUND CABLE
FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING 		001 A 18 054 004 31  -
GROMMET
FOR STARTER CABLE THROUGH BRACKET TO FRONT WALL 		001 A 18 699 704 81  -
LOCK WASHER
B 6 DIN 127 FOR STARTER CABLE THROUGH BRACKET TO FRONT WALL 		001 -
LENS-HD. SCREW
AM 6X8 DIN 7985-4 S FOR STARTER CABLE THROUGH BRACKET AT FRONT WALL 		001 -
GROMMET
FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL 		001 A 00 099 734 81  -
009 FIXING CLAMP
FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY 		001 A 18 799 500 37  -
FIXING CLAMP
FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY 		001 A 18 199 500 20  -
LENS-HD. SHEET
METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY 		001 -
LENS-HD. SCREW
AM 5X10 DIN 7985-4 S FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY 		001 -
LOCK WASHER
B 5 DIN 127 FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY 		001 -

CABLES 		- XXX XXX XXX XXXX -
REPLACED BY
120 540 26 05 TOGETHER WITH 1 FUSE BOX 180 540 09 50 UP TO CHASSIS 7503258 		- A 12 054 024 05  -
015 MAIN CABLE HARNESS
FROM CHASSIS 7503259 		001 A 12 054 026 05  -
MAIN CABLE HARNESS 001 A 12 054 027 05  -
016 HOUSING, LOWER
PART, WITH SOCKET 		001 A 00 054 506 28  -
017 GASKET 001 A 00 054 500 80  -
018 CABLE HARNESS 001 A 12 154 008 07  -
019 CABLE HARNESS
FROM GENERATOR TO REGULATOR 		001 A 18 054 000 08  -
021 RUBBER PROTECTIVE CAP
FOR TERMINAL AT GENERATOR D POS. AND DF 		002 A 00 054 602 35  -
INSULATING HOSE
B 16X18 SW 200 1G DIN 40621 OVER MAIN CABLE HAMESS, ROTARY SWITCH ORDER BY THE METER 		001 -
023 CABLE HARNESS
FROM 2-POLE CABLE CONNECTOR TO REVERSE DRIVE LIGHT 		001 A 12 054 017 38  -
024 BRACKET
FOR CABLE HARNESS AT REVERSE DRIVE LIGHT SWITCH 		001 A 18 054 600 43  -
025 GROMMET
FOR CABLE HARNESS AT BRACKET 		001 A 00 099 731 81  -
FIXING CLAMP
FOR CABLE OF REV. DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT 		001 A 18 199 500 20  -
LENS-HEAD SHEET
METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE OF REV. DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT 		001 -
GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL
Zastąpiono przez: A  186 540 03 41 		- A 13 654 004 41  -
026 GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL 		001 A 18 654 003 41  -
GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL 		001 A 12 054 000 41  -
027 SCREW WITH LOCKING PLATE
FOR GROUND CABLE AT PEDAL FLOOR 		001 A 12 042 002 27  -
LOCK WASHER
B 6 DIN 127 FOR GROUND CABLE AT PEDAL FLOOR 		001 -
HEX. NUT
M 6 DIN 934-5 S FOR GROUND CABLE AT PEDAL FLOOR 		001 -
031 CABLE CONNECTOR, 5-POLE
FOR TAIL LIGHT CABLE HARNESS 		002 A 00 054 619 41  -
032 CABLE CONNECTOR, 5-POLE
FOR STEERING SPINDLE CABLE HARNESS 		001 A 00 054 606 41  -
033 CABLE CONNECTOR 2-POLE
FOR HEATER BLOWER CONNECTION 		002 A 00 054 618 41  -
LENS-HEAD SHEET
METAL SCREW B 3,9X9,5 DIN 7981 FOR 5-POLE CABLE CONNECTOR AT FRONT WALL 		004 -
LENS-HEAD SHEET
METAL SCREW B 3,9X19 DIN 7981 FOR 5-POLE CABLE CONNECTOR AT WHEEL HOUSE, STEERING SPINDLE CABLE HARNESS 		002 -
LENS-HEAD SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR 2-POLE CABLE CONNECTOR AT WHEEL ARCH PAN, LEFT AND RIGHT, HEATER BLOWER 		004 -
037 GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		001 A 18 199 700 81  -
038 GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		001 A 00 099 727 81  -
38a GROMMET
FOR BLINKER THROUGH WHEEL ARCH FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		002 A 00 099 722 81  -
039 CLAMP WITH LUG
FOR MAIN CABLE HARNESS AT FRONT WALL 		005 A 00 098 833 78  -
039 CLAMP WITH LUG
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 00 098 833 78  -
040 CLAMP WITH LUG
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 00 098 834 78  -
040 CLAMP WITH LUG
FOR MAIN CABLE HARNESS AT FRONT WALL 		005 A 00 098 834 78  -
GROUND CABLE
FOR PARKING LIGHT WITH ASYMMETRIC DIMMER LIGHT FROM CHASSIS 7502539 UP TO CHASSIS 7503258 		002 A 18 054 030 38  -
042 RUBBER SLEEVE
FOR FUEL TRANSMITTER CABLE 		001 A 00 099 717 81  -
RUBBER SLEEVE
FOR GLOVE BOX 		001 A 00 099 730 81  -
CLIP WITH LUG
FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN 		008 A 00 098 833 78  -
CLIP WITH LUG
FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN 		005 A 00 098 834 78  -
LENS-HD.SHEET METAL SCREW
B 4,8X9,5 DIN 7981 F.GROUND CABLE, TRANSMITTER AT REAR CROSS MEMBER 		001 -
056 BRACKET
FOR TAIL LIGHT CABLE HARNESS, LEFT AND RIGHT 		008 A 12 054 601 82  -
LOCK WASHER
B 4 DIN 127 FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT 		002 -
LENS-HEAD SCREW
AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT 		002 -
HEX. NUT
M 4 DIN 934-5 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT 		002 -
061 CABLE COVER PLATE
FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		001 A 12 054 600 81  -
LENS-HEAD SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		002 -
063 FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 13 699 500 37  -
LENS-HEAD SCREW
AM 4X12 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LENS-HEAD SCREW
AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
066 CAGE CLIP WITH NUT
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 00 099 022 91  -
RUBBER HOSE,
DIA 15X17, 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS
Zastąpiono przez: A  000 997 47 82 		- A 18 099 715 82  -
067 RUBBER HOSE,
DIA 15X17, 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS ORDER BY THE METER 		NB A 00 099 747 82  -
068 FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 13 699 501 35  -
069 FIXING CLAMP
FOR STEERING SPINDLE CABLE HARNESS AT FORKED SUPPORT 		001 A 18 199 500 20  -
LENS-HEAD SHEET
METAL SCREW B 4,2X9,5 DIN 7981 FOR STEERING SPINDLE CABLE HARNESS AT FORKED SUPPORT 		001 -
FIXING CLIP
FOR CABLE, STOP SWITCH AT BRAKE FLUID PIPE 		002 A 00 198 809 78  -
FUSE BOX
WITH FUSE AND BRASS SCREW UP TO CHASSIS 7503258 		001 A 18 054 003 50  -
FUSE BOX
WITH FUSE AND BRASS SCREW AB FGST. 7503259
Zastąpiono przez: A  180 540 09 50 		- A 12 154 007 50  -
071 FUSE BOX
WITH FUSE AND BRASS SCREW AB FGST. 7503259 		001 A 18 054 009 50  -
072 COVER
FOR FUSE BOX 		001 A 00 054 502 03  -
FUSE, 12 AMP.
8 DIN 72581 UP TO CHASSIS 7503258 		012 -
FUSE, 12 AMP.
8 DIN 72581 FROM CHASSIS 7503259 		011 -
FUSE, 35 AMP.
25 DIN 72581 FROM CHASSIS 7503259 		001 -
BRACKET, LOWER PART
FOR FUSE BOX UP TO CHASSIS 9503080 		001 A 12 054 032 73  -
074 BRACKET, LOWER PART
FOR FUSE BOX FROM CHASSIS 9503081 		001 A 12 054 509 40  -
075 BRACKET, UPPER PART
FOR FUSE BOX 		001 A 18 054 501 40  -
LENS-HEAD SCREW
AM 6X12 DIN 7985-4 S FOR BRACKET AT COWL 		002 -
LOCK WASHER
B 6 DIN 127 FOR BRACKET AT COWL 		002 -
LENS-HEAD SHEET
METAL SCREW B 3,9 X 19 DIN 7981 FOR FUSE BOX TO BRACKET 		002 -
SPRING NUT
FOR FUSE BOX TO BRACKET 		002 A 00 099 413 45  -
LENS-HEAD SCREW
AM 5X15 DIN 7985-4 S FOR FUSE BOX AT BRACKET, BOOSTER BRAKE SPECIAL REQUEST FOR INSTALLATION OF ATE BOOSTER BRAKE T 50 		002 -
LOCK WASHER
B 5 DIN 127 FOR FUSE BOX AT BRACKET, BOOSTER BRAKE SPECIAL REQUEST FOR INSTALLATION OF ATE BOOSTER BRAKE T 50 		002 -
HEX. NUT
M 5 DIN 934-5 S FOR FUSE BOX AT BRACKET, BOOSTER BRAKE SPECIAL REQUEST FOR INSTALLATION OF ATE BOOSTER BRAKE T 50 		002 -
076 FIXING CLAMP
FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 A 18 199 500 20  -
LENS-HEAD SCREW
AM 4X10 DIN 7985-4 S FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 -
077 FIXING CLAMP
FOR CABLE TO STOP LIGHT AND FOOT DIMMER SWITCH 		001 A 15 399 503 22  -
LENS-HEAD SHEET
METAL SCREW B 4,8X9,5 DIN 7981 FOR CABLE TO STOP LIGHT AND FOOT DIMMER SWITCH 		001 -
078 CLAMP
FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT AT GUTTER 		002 A 00 098 888 78  -
079 FIXING CLAMP
FOR MAIN CABLE HARNESS AND BRAKE FLUID PIPE AT FRAME BOTTOM 		002 A 12 199 500 22  -
HEX. HEAD
SHEET METAL SCREW B 6,3X16 DIN 7976 		002 -

INSTRUMENTS AND SWITCHES 		- XXX XXX XXX XXXX -
PUSH-BUTTON SWITCH
FOR INSTRUMENT LIGHTING
Zastąpiono przez: A  000 545 06 11 		- A 12 054 000 44  -
080 PUSH-BUTTON SWITCH
FOR INSTRUMENT LIGHTING 		001 A 00 054 506 11  -
081 ESCUTCHEON 001 A 12 054 500 72  -
082 FELT RING 001 A 00 099 720 40  -
083 BUTTON 001 A 12 054 502 37  -
084 COMBI-INSTRUMENT WITH
KILOMETER GRADUATION RATIO 0.91, RATIO OF REAR AXLE 1:3,9 		001 A 10 554 205 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1.47, RATIO OF REAR AXLE 1:3,9 EXPORT 		001 A 10 554 206 01  -
COMBI-INSTRUMENT WITH
KILOMETER GRADUATION RATIO 0.96, RATIO OF REAR AXLE 1:4.1 EXPORT FOR MADEIRA AND HONGKONG 		001 A 12 154 203 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1.54, RATIO OF REAR AXLE 1:4.1 EXPORT FOR MADEIRA AND HONGKONG 		001 A 12 154 201 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1,36, RATIO OF REAR AXLE 1:3,9 EXPORT, SPECIAL REQUEST FOR TIRES 6.40 - 15 		001 A 10 554 207 01  -
COMBI-INSTRUMENT WITH
KILOMETER GRADUATION RATIO 0,845, RATIO OF REAR AXLE 1:3,9 EXPORT, SPECIAL REQUEST FOR TIRES 6.40 - 15 		001 A 10 554 208 01  -
085 KILOMETER COUNTER
RATIO 0.91, RATIO OF REAR AXLE 1:3.9 		001 A 00 154 274 06  -
KILOMETER COUNTER
RATIO 0.96, RATIO OF REAR AXLE 1:4,1 EXPORT FOR MADEIRA AND HONGKONG 		001 A 00 154 243 06  -
KILOMETER COUNTER
RATIO 0.845, RATIO OF REAR AXLE 1:3.9 EXPORT, SPECIAL REQUEST FOR TIRES 6.40 - 15 		001 A 00 154 280 06  -
MILEAGE COUNTER
RATIO 1.54, RATIO OF REAR AXLE 1:4,1 EXPORT FOR MADEIRA AND HONGKONG 		001 A 00 154 242 06  -
MILEAGE COUNTER
RATIO 1,47, RATIO OF REAR AXLE 1:3.9 EXPORT 		001 A 00 154 275 06  -
MILEAGE COUNTER
RATIO 1.36, RATIO OF REAR AXLE 1:3,9 EXPORT, SPECIAL REQUEST FOR TIRES 6.40 - 15 		001 A 00 154 281 06  -
086 OIL PRESSURE GAUGE 001 A 00 054 271 02  -
087
LENGTH OF CAPILLARY TUBE 1,700-MM 		001 A 00 154 244 05  -
088 FUEL GAUGE 001 A 00 054 244 03  -
089 TENSION SPRING
FOR FIXING OF COMBI-INSTRUMENT 		002 A 12 093 317 10  -
090 RUBBER FRAME
FOR COMBI-INSTRUMENT 		001 A 12 054 202 80  -
091 LAMP SOCKET 006 A 00 054 507 19  -
BULB
H 12 V 2 W DIN 72601 		006 -
CLIP WITH LUG
FOR HOUSING, UPPER PART AND LOWER PART AT GLOVE BOX COVER PLATE 		002 A 00 098 834 78  -
100 CLOCK WITH MECHANIC DRIVE 001 A 12 054 203 11  -
101 LAMP SOCKET 001 A 00 054 507 19  -
BULB
H 12 V 2 W DIN 72601 		001 -
109 DIMMING RESISTOR
FOR INSTRUMENT LIGHTING 		001 A 00 054 508 31  -
110 PUSH -
BUTTON STARTING SWITCH 		001 A 00 054 517 14  -
111 ESCUTCHEON
FOR PUSH - BUTTON STARTING SWITCH 		001 A 12 054 503 72  -
OIL PRESSURE GAUGE PIPE
UP TO CHASSIS 9503080 		001 A 18 054 006 60  -
OIL PRESSURE GAUGE PIPE
UP TO CHASSIS 9503718 		001 A 18 054 003 60  -
OIL PRESSURE GAUGE PIPE
UP TO CHASSIS 9503080 		001 A 18 054 008 60  -
OIL PRESSURE GAUGE PIPE
UP TO CHASSIS 9503718 		001 A 18 054 009 60  -
123 OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO HOSE FROM CHASSIS 9503081 		001 A 18 054 013 60  -
OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO CONNECTING PIECE FROM CHASSIS 9503719 		001 A 12 054 005 60  -
CONNECTING NIPPLE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503719 		001 A 12 854 200 47  -
OIL PRESSURE GAUGE PIPE
FROM CONNECTING PIECE TO HOSE FROM CHASSIS 9503719 		001 A 12 054 006 60  -
HOSE PIECE
DIA. 15 X 17, 20-MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE
Zastąpiono przez: A  000 997 47 82 		- A 12 099 708 82  -
HOSE PIECE
DIA. 15 X 17, 20-MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503080 		001 A 00 099 747 82  -
HOSE PIECE
DIA. 15 X 17, 20-MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503080 		001 A 00 099 747 82  -
LOCK WASHER
B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503718 		001 -
HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503080 		001 -
HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503718 		001 -
SPRING WASHER
A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503081 		002 -
SPRING WASHER
A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503719 		002 -
HEX. NUT
BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503081 		001 -
HEX. NUT
BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503719 		001 -
127 RUBBER HOSE 25 MM LONG
FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END 		002 A 00 098 709 32  -
128 FIXING CLAMP
FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END 		002 A 13 699 505 01  -
LENS-HEAD SHEET
METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END 		002 -
FIXING CLAMP
FOR CAPILLARY TUBE AT FRONT WALL 		001 A 13 699 505 01  -
LENS-HEAD SHEET
METAL SCREW B 3,9X9,5 DIN 7981 FOR CAPILLARY TUBE AT FRONT WALL 		001 -
HOSE
FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503080 		001 A 12 154 000 59  -
HOSE
FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503718 		001 A 12 154 000 59  -
130 HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503081 		001 A 12 854 000 59  -
HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503719 		001 A 12 154 002 59  -
131 STOP LIGHT SWITCH
ALSO SEE GROUP 42 		001 A 00 054 522 09  -
132 FOOT DIMMER SWITCH 001 A 00 054 504 12  -
132a REVERSING SWITCH
FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) 		001 A 00 054 591 24  -
BLINKER LEVER KNOB, BLACK
FOR REVERSING SWITCH SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA)
Zastąpiono przez: A  180 545 02 37 		- A 18 054 500 37  -
132b BLINKER LEVER KNOB, BLACK
FOR REVERSING SWITCH SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) 		001 A 18 054 502 37  -
CABLE HARNESS
FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) 		001 A 18 054 016 09  -
133 INSULATING PLATE
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		001 A 13 654 501 58  -
LENS-HEAD COUNTERSUNK
SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002 -
135 CAGE CLAMP WITH NUT
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002 A 00 099 025 91  -
GROMMET
FOR CABLE TO FOOT DIMMER SWITCH 		001 A 00 099 727 81  -
FLEXIBLE DRIVE
SHAFT, 1,750-MM LONG
Zastąpiono przez: A  120 542 03 07 		- A 12 054 204 07  -
137 FLEXIBLE DRIVE
SHAFT, 1,750-MM LONG 		001 A 12 054 203 07  -
GROMMET
FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL
Zastąpiono przez: A  186 997 04 81 		- A 18 399 701 81  -
GROMMET
FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL 		001 A 18 699 704 81  -
GROMMET
FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL 		001 A 00 099 731 81  -
CLAMP
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT 		002 A 00 098 834 78  -
CLAMP
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT 		001 A 00 098 834 78  -
139 FIXING CLAMP
FOR TACHOMETER SHAFT AT BEARING, CONTROL SHAFT 		001 A 12 099 500 01  -
LENS HEAD SCREW
AM 5X10 DIN 7985-4 S FOR TACHOMETER SHAFT AT BEARING, CONTROL SHAFT 		001 -
LOCK WASHER
B 5 DIN 127 FOR TACHOMETER SHAFT AT BEARING, CONTROL SHAFT 		001 -
142 GROMMET
FOR TACHOMETER SHAFT THROUGH FORKED SUPPORT 		002 A 18 099 712 81  -
143 GROMMET
TO SEAL 3 RD PASSAGE OF FORKED SUPPORT 		001 A 18 098 700 44  -
144 THREE-ELEMENT VOLTAGE 001 A 00 015 455 06  -
145 GROMMET WITH 003 A 00 015 402 50  -
LOCK WASHER
B 6 DIN 127 TO FIX REGULATOR TO BRACKET, WHEEL ARCH PAN 		003 -
LENS HEAD SCREW
AM 6X20 DIN 7985-4 S TO FIX REGULATOR TO BRACKET, WHEEL ARCH PAN 		003 -
148 GROMMET
FOR CABLE FROM VOLTAGE REGULATOR TO GENERATOR 		003 A 00 099 707 81  -
ADDITIONAL CABLE HARNESS
SPECIAL REQUEST FOR LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA 		001 A 12 154 017 09  -
INSULATING HOSE
B 20X22,4 SW 100 MM DIN 40621 OVER MAIN CABLE HARNESS, LIGHT TURNING SWITCH, ORDER BY THE METER SPECIAL REQUEST FOR LIGH 		001 -
ADDITIONAL FUSE
BOX, 2-POLE AT FRONT WALL SPECIAL REQUEST FOR LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA 		001 A 00 054 503 01  -
CYLINDRICAL SCREW
AM 4X15 DIN 84 FOR FUSE BOX AT FRESH-AIR DUCT SPECIAL REQUEST FOR LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA 		001 -
REPLACED BY 001542 20 20 - A 00 054 273 20  -
REPLACED BY 001542 20 20 - A 00 054 244 20  -
REPLACED BY 001542 20 20 - A 00 154 207 20  -
150 HORN 001 A 00 154 220 20  -
HORN
SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE 		001 A 00 054 271 20  -
HORN
Zastąpiono przez: A  001 542 08 20 		- A 00 054 245 20  -
HORN
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 00 154 208 20  -
HORN
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 00 054 246 20  -
HEX. HEAD SCREW
M 10X28 DIN 931-8 G FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
LOCK WASHER
B 10 DIN 127 FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
HEX. NUT
M 10 DIN 934-5 S FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
152 HEX. HEAD SCREW
M 10X28 DIN 931-8 G FOR HORN AT BRACKET 		001 -
153 LOCK WASHER
B 10 DIN 127 FOR HORN AT BRACKET 		001 -
154 HEX. NUT
M 10 DIN 934-5 S FOR HORN AT BRACKET 		001 -
BRACKET
FOR HORN AT CROSS TUBE, FRONT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 10 120 612 00 31 -
BRACKET
FOR HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 054 204 40  -
HEX. HEAD SCREW
M 6X15 DIN 933-8 G FOR BRACKET AT LEFT WHEEL HOUSE SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
LOCK WASHER
B 6 DIN 127 FOR BRACKET AT LEFT WHEEL ARCH PAN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
WASHER
A 6,4 DIN 9021 FOR BRACKET AT LEFT WHEEL ARCH PAN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
HEX. NUT
M 6 DIN 934-5 S FOR BRACKET AT LEFT WHEEL ARCH PAN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		004 -
CYLINDRICAL SCREW
AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		004 -
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTION AT HORN 		002 -
CYLINDRICAL SCREW
AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN 		002 -
160 IGNITION COIL 001 A 00 015 800 03  -
161 FIXING CLAMP
FOR IGNITION COIL 		001 A 00 015 802 40  -
CYLINDRICAL SCREW
BM 5X40 DIN 84-4 S 		001 -
SQUARE NUT
M 5 DIN 562 		001 -
HEX. HEAD SCREW
M 6X12 DIN 933-8 G FOR IGNITION COIL AT WHEEL ARCH PAN 		002 -
LOCK WASHER
B 6 DIN 127 FOR IGNITION COIL AT WHEEL ARCH PAN 		002 -
WASHER
A 6,4 DIN 9021 FOR IGNITION COIL AT WHEEL ARCH PAN 		002 -
HEX. NUT
M 6 DIN 934-5 S FOR IGNITION COIL AT WHEEL ARCH PAN 		002 -
167 RUBBER PROTECTIVE CAP
FOR IGNITION COIL 		002 A 00 054 602 35  -
CONTACTOR
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM
Zastąpiono przez: A  000 542 27 19 		- A 00 054 215 19  -
CONTACTOR
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 00 054 227 19  -
PUSH - BUTTON SWITCH
FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 000 44  -
ESCUTCHEON
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 13 654 506 72  -
FELT RING
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 00 099 720 40  -
BUTTON
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 13 630 209 01  -
ADDITIONAL CABLE HARNESS
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 006 09  -
ADDITIONAL CABLE HARNESS
FROM 2ND TO 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 005 09  -
ELECTRICAL CABLE
FROM FUSE BOX TO RELAY TERMINAL 30/51 SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 001 38  -
ELECTRICAL CABLE
FROM RELAY TERMINAL 87 TO 2ND HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 002 38  -
GROUND CABLE
FROM 2ND HORN TO GROUND SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 003 38  -
SOCKET FOR HAND LIGHT
SPECIAL REQUEST 		001 A 00 054 513 25  -
ELECTRICAL CABLE,
BLACK 1,000-MM LONG A 1 DIN 72551 ORDER BY THE METER SPECIAL REQUEST 		001 -
INSULATING HOSE,
BLACK 950-MM LONG B 3X3,8 DIN 40621 ORDER BY THE METER SPECIAL REQUEST 		001 -
CYLINDRICAL SCREW
AM 5X10 DIN 84-4 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
LOCK WASHER
B 5,3 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
HEX. NUT
M 5 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
Aby dowiedzieć się, gdzie kupić przedmiot lub jego odpowiednika, kliknij na numerze katalogowym.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA