ELECTRICAL EQUIPMENT AND INSTRUMENTS

EPC / Mercedes / 1 / FG / FG 105.011 / 54 / 035
‹ ›

№- Nazwa I* Numer części A

BATTERY, STARTER CABLE 		- XXX XXX XXX XXXX -
001 LEAD BATTERY 12 V 56 AH 001 A 00 054 146 01  -
LEAD BATTERY 12 V 56 AH
TROPICAL DESIGN 		001 A 00 054 112 01  -
SPECIAL COLD
START BATTERY FOR REGIONS WITH COLD TEMPERATURES 		001 A 00 054 158 01  -
FIXING FRAME
Zastąpiono przez: A  111 540 00 23 		- A 12 154 001 23  -
002 FIXING FRAME 001 A 11 154 000 23  -
003 TIGHTENING SCREW
FOR FIXING OF BATTERY 		002 A 12 054 101 24  -
LOCK WASHER
B 6 DIN 127 FOR FIXING OF BATTERY 		002 -
HEX. NUT
M 6 DIN 934-5 S FOR FIXING OF BATTERY 		002 -
RUBBER HOSE, 20 MM LONG
ABOVE ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER 		002 A 00 098 705 32  -
STARTER CABLE
FROM POS. POLE TO STARTER MOTOR
Zastąpiono przez: A  128 540 00 30 		- A 18 054 000 30  -
006 STARTER CABLE
FROM POS. POLE TO STARTER MOTOR 		- A 12 854 000 30  -
STARTER CABLE
FROM POS. POLE TO STARTER MOTOR 		- A 18 054 001 30  -
RUBBER PROTECTIVE CAP
FOR STARTER CABLE
Zastąpiono przez: A  111 546 00 35 		- A 13 654 600 35  -
007 RUBBER PROTECTIVE CAP
FOR STARTER CABLE 		001 A 11 154 600 35  -
008 GROUND CABLE
FROM NEG.POLE OF BATTERY TO ENGINE 		- A 18 054 000 31  -
GROUND CABLE
FROM NEG.POLE OF BATTERY TO ENGINE 		- A 18 054 004 31  -
009 GROMMET
FOR STARTER CABLE THROUGH BRACKET AT FRONT WALL 		- A 00 099 734 81  -
010 GROMMET
FOR STARTER CABLE THROUGH PARTITION 		001 A 18 699 707 81  -
FIXING CLAMP
FOR STARTER CABLE AT COWL OR PEDAL FLOOR RESP. 		- A 13 699 504 20  -
LENS-HD. SHEET
METAL SCREW BZ 4, 8X9, 5 DIN 7981 FOR STARTER CABLE AT COWL OR PEDAL FLOOR RESP. 		- -

CABLES 		- XXX XXX XXX XXXX -
MAIN CABLE HARNESS
UP TO CHASSIS 7501979 		- A 10 554 000 05  -
REPLACED BY
105 540 04 05 TOGETHER WITH 1 FUSE BOX 180 540 04 50 FROM CHASSIS 7501980-7504312 		- A 10 554 002 05  -
015 MAIN CABLE HARNESS
FROM CHASSIS 7504313 		- A 10 554 004 05  -
MAIN CABLE HARNESS
UP TO CHASSIS 7502567 		- A 10 554 001 05  -
REPLACED BY
105 540 05 05 TOGETHER WITH 1 FUSE BOX 180 540 04 50 FROM CHASSIS 7502568-7504312 		- A 10 554 003 05  -
MAIN CABLE HARNESS
FROM CHASSIS 7504313 		- A 10 554 005 05  -
016 HOUSING, LOWER
PART, WITH SOCKET 		001 A 00 054 506 28  -
017 GASKET 001 A 00 054 500 80  -
AUXILIARY CABLE HARNESS - A 18 054 007 09  -
AUXILIARY CABLE HARNESS - A 18 054 009 09  -
CABLE HARNESS
FOR TAIL LAMPS UP TO CHASSIS 7504312 		- A 12 154 001 07  -
CABLE HARNESS
FOR TAIL LAMPS UP TO CHASSIS 7504312 		- A 12 154 002 07  -
018 CABLE HARNESS
FOR TAIL LAMPS FROM CHASSIS 7504313 		001 A 12 154 008 07  -
AUXILIARY CABLE HARNESS
FROM CONTROL SWITCH, REAR AXLE TO GROUND AS WELL AS LIMIT SWITCH, SERVO AGGREGATE 		- A 18 054 008 09  -
GROUND CABLE
FROM RELAY, TERMINAL 30/51, TO GROUND 		- A 18 054 029 38  -
020 CABLE HARNESS
FROM GENERATOR TO REGULATOR 		001 A 18 054 000 08  -
021 RUBBER PROTECTIVE CAP
FOR TERMINAL AT GENERATOR DPOS. AND DF 		002 A 00 054 602 35  -
INSULATING HOSE,
220-MM LONG B 10X11, 5 SW DIN 40621 FOR CABLE LAYING TO BLINKER, FRONT ORDER BY THE METER 		002 -
INSULATING HOSE,
100-MM LONG B 16 X 18 SW DIN 40621 OVER MAIN CABLE HARNESS, ROTARY SWITCH ORDER BY THE METER 		001 -
023 CABLE HARNESS
FROM CABLE CONNECTORTTWO POLES TO REVERSE DRIVE LIGHT SWITCH 		- A 12 054 017 38  -
CABLE HARNESS
FROM CABLE CONNECTORTTWO POLES TO REVERSE DRIVE LIGHT SWITCH 		- A 18 054 031 38  -
024 BRACKET
FOR CABLE HARNESS AT REVERSE DRIVE LIGHT SWITCH 		001 A 18 054 600 43  -
025 GROMMET
FOR CABLE HARNESS AT BRACKET 		001 A 00 099 731 81  -
FIXING CLAMP
FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 		- A 13 699 500 37  -
LENS-HD. SHEET
METAL SCREW BZ 4, 8X9,5 DIN 7981 FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 		- -
FIXING CLAMP
FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 		- A 12 099 500 01  -
LENS-HD. SCREW
AM 5X10 DIN 7985-4S FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 		- -
LOCK WASHER
B 5 DIN 127 FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 		- -
GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL
Zastąpiono przez: A  186 540 03 41 		- A 13 654 004 41  -
026 GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL 		001 A 18 654 003 41  -
LOCK WASHER
B 6 DIN 127 FOR GROUND CABLE AT FRONT WALL OR BRACKET RESP. ATE BOOSTER BRAKE 		001 -
HEX. -HD. SCREW
M 6X8 DIN 933-8 G FOR GROUND CABLE AT FRONT WALL OR BRACKET RESP. ATE BOOSTER BRAKE 		001 -
027 SCREW WITH LOCKING PLATE
FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN 		001 A 12 042 002 27  -
LOCK WASHER
B 6 DIN 127 FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN 		001 -
HEX. NUT
M 6 DIN 934-5 S FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN 		001 -
031 CABLE CONNECTOR, 5 POLES
FOR TAIL LIGHT CABLE HARNESS 		- A 00 054 619 41  -
031 CABLE CONNECTOR, 5 POLES
FOR TAIL LIGHT CABLE HARNESS 		- A 00 054 619 41  -
CABLE CONNECTOR, 6 POLES
FOR TAIL LIGHT CABLE HARNESS 		- A 00 054 617 41  -
032 CABLE CONNECTOR, 5 POLES
FOR STEERING SPINDLE TUBE CABLE HARNESS 		001 A 00 054 606 41  -
033 CABLE CONNECTOR, 2 POLES
FOR HEATING BLOWER CONNECTION 		002 A 00 054 618 41  -
LENS-HD. SHEET
METAL SCREW BZ 3, 9X9, 5 DIN 7981 FOR CABLE CONNECTOR, 5 POLES AT FRONT WALL 		004 -
LENS-HD. SHEET
METAL SCREW B 3, 9X19 DIN 7981 FOR CABLE CONNECTOR, 5 POLES AT WHEEL ARCH PAN 		002 -
LENS-HD. SHEET
METAL SCREW B 3, 9X13 DIN 7981 FOR CABLE CONNECTOR, 2 POLES AT WHEEL ARCH PAN 		004 -
037 GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		001 A 18 199 700 81  -
038 GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		- A 00 099 727 81  -
GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		- A 00 099 730 81  -
039 FIXING CLAMP
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		003 A 00 098 853 78  -
040 FIXING CLAMP
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		003 A 00 098 834 78  -
CABLE CONNECTOR
FOR CABLE FROM SHIFTING LEVER TO CONTROL VALVE 		- A 00 054 600 42  -
GROMMET
FOR FUEL TRANSMITTER CABLE
Zastąpiono przez: A  000 997 18 81 		- A 00 099 717 81  -
042 GROMMET
FOR FUEL TRANSMITTER CABLE 		001 A 00 099 718 81  -
GROMMET
FOR LUGGAGE COMPARTMENT COVER, INNER PANEL UP TO CHASSIS 7504312 		001 A 00 099 722 81  -
GROMMET
FOR TAILLIGHT CABLE HARNESS, REAR SEAT SUPPORT UP TO CHASSIS 7501186 		002 A 00 099 730 81  -
INSULATING HOSE,
40-MM LONG B 12X13, 6 SW DIN 40621 FOR MAIN CABLE HARNESS AT WHEEL ARCH PAN, LEFT AND RIGHT ORDER BY THE METER 		004 -
FIXING CLAMP
FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN 		009 A 00 098 833 78  -
FIXING CLAMP
FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN 		005 A 00 098 834 78  -
FIXING CLAMP
FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 		001 A 18 699 502 20  -
LOCK WASHER
B 5 DIN 127 FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 		001 -
LENS-HD. SCREW
AM 5X10 DIN 7985-4 S FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 		001 -
LENS-HD. SHEET
METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER, AT REAR CROSS MEMBER FROM CHASSIS 7504313 		001 -
FIXING CLAMP
1X8 DIN 72571 FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 		001 -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 		001 -
LOCK WASHER
B 4 DIN 127 FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 		001 -
HEX. NUT
M 4 DIN 934-5 S FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 		001 -
056 LINK
FOR TAIL LIGHT CABLE HARNESS, LEFT AND RIGHT 		008 A 12 054 601 82  -
LOCK WASHER
B 4 DIN 127 FOR GROUND CONNECTION, TAIL LIGHT 		002 -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION, TAIL LIGHT 		002 -
FIXING CLAMP
FOR CABLE TO LICENCE PLATE LIGHT AT LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7504312 		002 A 00 098 817 78  -
FIXING CLAMP
FOR CABLE TO LICENCE PLATE LIGHT AT LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7504312 		002 A 18 699 502 20  -
061 CABLE COVER PLATE
FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		001 A 12 054 600 81  -
LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		002 -
FIXING CLAMP
FOR CABLE TO CONTROL SWITCH AT REAR CROSS MEMBER 		- A 18 699 502 20  -
LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE TO CONTROL SWITCH AT REAR CROSS MEMBER 		- -
062 FIXING CLAMP
FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING 		- A 12 099 500 01  -
LENS-HD. SCREW
AM 5X12 DIN 7985-4 S FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING 		- -
LOCK WASHER
B 5 DIN 127 FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING 		- -
063 FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		- A 13 699 500 37  -
063 FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		- A 13 699 500 37  -
LENS-HD. SCREW
AM 4X12 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
064 FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 13 699 501 35  -
065 FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		- A 18 799 500 37  -
LENS-HD. SCREW
AM 6X15 DIN 7985-4S FOR MAIN CABLE HARNESS AT FRONT WALL 		002 -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		002 -
LENS-HD. SHEET
METAL SCREW BZ 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
CAGE CLAMP WITH NUT
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 00 099 022 91  -
RUBBER HOSE,
15X17 DIA., 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS
Zastąpiono przez: A  000 997 47 82 		- A 12 099 708 82  -
067 RUBBER HOSE,
15X17 DIA., 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS ORDER BY THE METER 		NB A 00 099 747 82  -
GROUND CABLE
FOR PARKING LIGHT WITH ASYMMETRIC DIMMING LIGHT FROM CHASSIS 7505583-7507560 		002 A 18 054 030 38  -
FIXING CLAMP
FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP 		001 A 13 699 501 35  -
LENS-HD.SCREW
AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP 		001 -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP 		001 -
FIXING CLAMP
FOR CABLE, STOP SWITCH AT BRAKE CABLE OR FOR CABLE TO LIMIT SWITCH RESP.
Zastąpiono przez: A  001 988 09 78 		- A 00 098 838 78  -
FIXING CLAMP
FOR CABLE, STOP SWITCH AT BRAKE CABLE OR FOR CABLE TO LIMIT SWITCH RESP. 		- A 00 198 809 78  -
FUSE BOX
Zastąpiono przez: A  180 540 00 50 		- A 18 054 003 50  -
FUSE BOX
UP TO CHASSIS 7504312 		001 A 18 054 000 50  -
FUSE BOX
Zastąpiono przez: A  180 540 04 50 		- A 18 054 009 50  -
071 FUSE BOX
FROM CHASSIS 7504313 		001 A 18 054 004 50  -
072 COVER
FOR FUSE BOX 		001 A 00 054 502 03  -
073 FUSE, 12 AMP.
8 DIN 72581 UP TO CHASSIS 7504312 		012 -
073 FUSE, 12 AMP.
8 DIN 72581 FROM CHASSIS 7504313 		011 -
73a FUSE, 35 AMP.
25 DIN 72581 FROM CHASSIS 7504313 		001 -
LENS-HD. SHEET
METAL SCREW BZ 4,2X19 DIN 7981 		002 -
SPRING NUT
NO LONGER INSTALLED 		- A 00 099 413 45  -
LOCK WASHER
B 6 DIN 127 FOR BLINKER TRANSMITTER AT BRACKET, PARTITION 		002 -
HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER AT BRACKET, PARTITION 		002 -

INSTRUMENTS AND CONTROLS 		- XXX XXX XXX XXXX -
PUSH-BUTTON SWITCH
FOR INSTRUMENT LIGHTING
Zastąpiono przez: A  000 545 06 11 		- A 12 054 000 44  -
080 PUSH-BUTTON SWITCH
FOR INSTRUMENT LIGHTING 		001 A 00 054 506 11  -
081 ESCUTCHEON 001 A 12 054 500 72  -
082 FELT RING 001 A 00 099 720 40  -
083 BUTTON 001 A 12 054 502 37  -
COMBI-INSTRUMENT WITH
KM-GRADUATION RATIO 0.96 - RATIO OF REAR AXLE 1: 4.1
Zastąpiono przez: A  121 542 03 01 		- A 12 154 202 01  -
COMBI-INSTRUMENT WITH
KM-GRADUATION RATIO 0.96 - RATIO OF REAR AXLE 1: 4.1 UP TO CHASSIS 7503492 FURTHER VALID FOR CARS EXPORTED TO MADEIRA AN 		001 A 12 154 203 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1.54 - RATIO OF REAR AXLE 1: 4.1 UP TO CHASSIS 7503492 FURTHER VALID FOR CARS EXPORTED TO MADEIR 		001 A 12 154 201 01  -
084 COMBI-INSTRUMENT WITH
KM - GRADUATION RATIO 0.91 - RATIO OF REAR AXLE 1: 3.9 FROM CHASSIS 7503493 		001 A 10 554 205 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1.47 - RATIO OF REAR AXLE 1:3.9 FROM CHASSIS 7503493 		001 A 10 554 206 01  -
COMBI-INSTRUMENT WITH
KM.GRADUATION RATIO 0.845 - RATIO OF REAR AXLE 1: 3.9 EXPORT - SPECIAL REQUEST FOR TIRES 6.40 - 15) 		001 A 10 554 208 01  -
COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1.36 - RATIO OF REAR AXLE 1:3.9 EXPORT - SPECIAL REQUEST (FOR TIRES 6.40 - 15) 		001 A 10 554 207 01  -
KILOMETER COUNTER
FOR COMBI-INSTRUMENT 121 542 03 01 		001 A 00 154 243 06  -
MILEAGE COUNTER
FOR COMBI-INSTRUMENT 121 542 01 01 		001 A 00 154 242 06  -
085 KILOMETER COUNTER
FOR COMBI-INSTRUMENT 105 542 05 01 		001 A 00 154 274 06  -
MILEAGE COUNTER
FOR COMBI-INSTRUMENT 105 542 06 01 		001 A 00 154 275 06  -
KILOMETER COUNTER
FOR COMBI-INSTRUMENT 105 542 08 01 		001 A 00 154 280 06  -
MILEAGE COUNTER
FOR COMBI-INSTRUMENT 105 542 07 01 		001 A 00 154 281 06  -
086 OIL PRESSURE GAUGE 001 A 00 054 271 02  -
087
TELETHERMOMETER CAPILLARY TUBE 1.700 MM LONG 		001 A 00 154 244 05  -
088 FUEL GAUGE 001 A 00 054 244 03  -
089 TENSION SPRING
FOR FIXING OF COMBI-INSTRUMENT 		002 A 12 099 317 10  -
090 RUBBER FRAME
FOR COMBI-INSTRUMENT 		001 A 12 054 202 80  -
LAMP SOCKET
Zastąpiono przez: A  000 545 07 19 		- A 18 354 500 19  -
091 LAMP SOCKET 006 A 00 054 507 19  -
BULB
H 12 V 2 W DIN 72601 		006 -
FIXING CLAMP
FOR HOUSING, UPPER PART WITH LOWER PART, AT GLOVE BOX COVER PLATE 		001 A 00 098 834 78  -
CLOCK, WITH
MECHANIC DRIVE UP TO CHASSIS 8501881 		001 A 12 054 203 11  -
100 CLOCK, ELECTRIC 12 VOLT
FROM CHASSIS 8501882 		001 A 12 054 205 11  -
LAMP SOCKET
Zastąpiono przez: A  000 545 07 19 		- A 18 354 500 19  -
101 LAMP SOCKET 001 A 00 054 507 19  -
BULB
H 12 V 2 W DIN 72601 		001 -
DIMMING RESISTOR
FOR INSTRUMENT LIGHTING
Zastąpiono przez: A  000 545 08 31 		- A 00 054 507 31  -
109 DIMMING RESISTOR
FOR INSTRUMENT LIGHTING 		001 A 00 054 508 31  -
110
SWITCH 		001 A 00 054 517 14  -
111 ESCUTCHEON
FOR PUSH-BUTTON STARTING SWITCH 		001 A 12 054 503 72  -
DISTANCE FLASHLIGHT
BLINKER SWITCH, BLACK
Zastąpiono przez: A  000 545 38 24 		- A 00 054 510 24  -
DISTANCE FLASHLIGHT
BLINKER SWITCH, BLACK UP TO CHASSIS 7505176 		001 A 00 054 538 24  -
DISTANCE FLASHLIGHT
BLINKER SWITCH, IVORY COLOURED EXPORT, SPECIAL REQUEST UP TO CHASSIS 7505176 		- A 00 054 539 24  -
113 DISTANCE FLASHLIGHT
BLINKER SWITCH FROM CHASSIS 7505177 		001 A 00 054 576 24  -
114 BLINKER LEVER
KNOB, DARK GRAPHIT GREY FROM CHASSIS 7505177 		001 A 18 054 502 37  -
BLINKER LEVER
KNOB, IVORY COLOURED EXPORT, SPECIAL REQUEST FROM CHASSIS 7505177
Zastąpiono przez: A  180 545 05 37 		- A 18 054 503 37  -
BLINKER LEVER
KNOB, IVORY COLOURED EXPORT, SPECIAL REQUEST FROM CHASSIS 7505177 		001 A 18 054 505 37  -
115 COVER PLATE
FOR DISTANCE FLASHLIGHT BLINKER SWITCH FROM CHASSIS 7505177 		001 A 18 046 200 23  -
LENS-HD. COUNTERSUNK
SCREW AM 4X10 DIN 7988-4S VERCHROMT FOR COVER PLATE AT JACKET TUBE FROM CHASSIS 7505177 		002 -
116 BLINKER TRANSMITTER, 001 A 00 054 423 32  -
117 REVERSING SWITCH
FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 75 		- A 00 054 591 24  -
118 BLINKER LEVER KNOB, BLACK
FOR REVERSING SWITCH SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 7507929 		- A 18 054 502 37  -
AUXILIARY CABLE HARNESS
FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 75 		- A 18 054 016 09  -
OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 8506199 		- A 18 054 008 60  -
OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 9502716 		- A 18 054 009 60  -
OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT OIL PRESSURE GAUGE, COMBIINSTRUMENT UP TO CHASSIS 8506199 		- A 18 054 006 60  -
OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT OIL PRESSURE GAUGE, COMBIINSTRUMENT UP TO CHASSIS 9502716 		- A 18 054 003 60  -
123 OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO HOSE FROM CHASSIS 8506200 		- A 18 054 013 60  -
OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO CONNECTING PIECE FROM CHASSIS 9502717 		- A 12 054 005 60  -
CONNECTING PIECE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9502717 		- A 12 854 200 47  -
OIL PRESSURE GAUGE PIPE
FROM CONNECTING PIECE TO HOSE FROM CHASSIS 9502717 		- A 12 054 006 60  -

Zastąpiono przez: A  000 997 47 82 		- A 12 099 708 82  -
RUBBER HOSE 20 MM LONG
ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE
Zastąpiono przez: A  000 997 47 82 		- A 18 099 715 82  -
RUBBER HOSE 20 MM LONG
ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199 		- A 00 099 747 82  -
RUBBER HOSE 20 MM LONG
ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199 		- A 00 099 747 82  -
124 GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED 		- A 18 699 706 81  -
124 GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 8506199 		- A 18 699 706 81  -
124 GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 8506199 		- A 18 699 706 81  -
LOCK WASHER
B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 8506199 		- -
LOCK WASHER
B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 9502716 		- -
HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 8506199 		- -
HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 9502716 		- -
SPRING WASHER
A 8 DIN 137 FROM CHASSIS 8506200 		- -
SPRING WASHER
A 8 DIN 137 FROM CHASSIS 9502717 		- -
HEX. NUT
BM 8 DIN 439-5 S FROM CHASSIS 8506200 		- -
HEX. NUT
BM 8 DIN 439-5 S FROM CHASSIS 9502717 		- -
RUBBER HOSE, 25 MM LONG
FOR OIL PRESSURE GAUGE PIPE AT COWL
Zastąpiono przez: A  000 987 00 32 		- A 00 098 709 32  -
127 RUBBER HOSE, 25 MM LONG
FOR OIL PRESSURE GAUGE PIPE AT COWL ORDER BY THE METER 		002 A 00 098 700 32  -
128 FIXING CLAMP
FOR OIL PRESSURE GAUGE PIPE AT COWL 		002 A 13 699 505 01  -
LENS-HD.SHEET METAL SCREW
BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT COWL 		002 -
HOSE
OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199 		- A 13 654 002 59  -
HOSE
OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9502716 		- A 13 654 002 59  -
HOSE
OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199 		- A 12 154 000 59  -
HOSE
OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9502716 		- A 12 154 000 59  -
130 HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 8506200 		- A 12 854 000 59  -
HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9502717 		- A 12 154 002 59  -
131 STPP LIGHT SWITCH
SEE ALSO GROUP 42 		001 A 00 054 522 09  -
132 FOOT DIMMER SWITCH 001 A 00 054 504 12  -
133 INSULATING PLATE
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		001 A 13 654 501 58  -
LENS-HD. COUNTERSUNK
SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002 -
135 CAGE CLIP WITH NUT
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002 A 00 099 025 91  -
GROMMET
FOR CABLE TO FOOT DIMMER SWITCH 		- A 00 099 727 81  -
137 FLEXIBLE DRIVE
SHAFT, 1.750-MM LONG 		- A 12 054 203 07  -
FLEXIBLE DRIVE
SHAFT, 1.820-MM LONG 		- A 10 554 200 07  -
138 GROMMET
FOR FLEXIBLE DRIVE SHAFT THROUGH FORK MEMBER 		- A 18 099 712 81  -
GROMMET
FOR FLEXIBLE DRIVE SHAFT THROUGH FORK MEMBER 		- A 18 699 704 81  -
139 GROMMET
FOR LOCKING PASSAGE OF THIRD FORK MEMBER 		- A 18 098 700 44  -
LOCKING WASHER
FOR LOCKING PASSAGE OF THIRD FORK MEMBER
Zastąpiono przez: A  000 987 04 44 		- A 00 098 700 44  -
LOCKING WASHER
RUBBER FOR LOCKING PASSAGE OF THIRD FORK MEMBER 		- A 00 098 704 44  -
FIXING CLAMP
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT 		- A 00 098 834 78  -
GROMMET
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT 		- A 00 099 731 81  -
GROMMET
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT 		- A 18 699 704 81  -
140 FIXING CLAMP
FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT 		- A 12 099 500 01  -
LENS-HD.SCREW
AM 5X10 DIN 7985-4S FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT 		- -
LOCK WASHER
B 5 DIN 127 		- -
143 3-ELEMENT VOLTAGE 001 A 00 015 455 06  -
145 RUBBER BUSHING 003 A 00 015 402 50  -
LOCK WASHER
B 6 DIN 127 FOR REGULATOR AT BRACKET, WHEEL ARCH PAN 		003 -
LENS-HD.SCREW
AM 6X20 DIN 7985-4S FOR REGULATOR AT BRACKET, WHEEL ARCH PAN 		003 -
148 GROMMET
FOR CABLE FROM VOLTAGE REGULATOR TO GENERATOR 		003 A 00 099 707 81  -
149 SOCKET
FOR HAND LAMP 		001 A 00 054 505 25  -
AUXILIARY CABLE HARNESS
SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001 A 12 154 017 09  -
INSULATING HOSE
100-MM LONG B 20 X 22,4 SW DIN 40621 OVER MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER SPECIAL REQUEST FOG 		001 -
FUSE BOX, 2-POLE
AT FRONT WALL SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001 A 00 054 503 01  -
CYLINDRICAL SCREW
AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRESH AIR BOX, LEFT SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001 -
150 HORN, BASS SOUND 001 A 00 054 233 20  -
151 HORN, HIGH SOUND 001 A 00 054 234 20  -
HORN, BASS SOUND
SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE 		001 A 00 154 209 20  -
HORN, MIDDLE SOUND
SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE 		001 A 00 154 210 20  -
HEX.-HD. SCREW
M 10X28 DIN 931-8 G FOR HORN AT BRACKET 		002 -
LOCK WASHER
B 10 DIN 127 FOR HORN AT BRACKET 		002 -
HEX. NUT
M 10 DIN 934-5 S FOR HORN AT BRACKET 		002 -
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTION AT HORN 		004 -
CYLINDRICAL SCREW
AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT HORN 		004 -
157 FIXING CLAMP
FOR CABLE TO HORN 		001 A 00 098 833 78  -
160 IGNITION COIL 001 A 00 015 807 03  -
161 FIXING CLAMP
FOR IGNITION COIL 		001 A 00 015 802 40  -
CYLINDRICAL SCREW
BM 5X40 DIN 84-4 S 		001 -
SQUARE NUT
M 5 DIN 562 		001 -
HEX.-HD.SCREW
M 6X12 DIN 933-8 G FOR IGNITION COIL AT BRACKET 		002 -
LOCK WASHER
B 6 DIN 127 FOR IGNITION COIL AT BRACKET 		002 -
WASHER
A 6,4 DIN 9021 FOR IGNITION COIL AT BRACKET 		002 -
167 RUBBER PROTECTIVE CAP
FOR IGNITION COIL 		002 A 00 054 602 35  -
168 COMPENSATING RESISTANCE 001 A 00 015 801 45  -
169 BRACKET
FOR COMPENSATING RESISTANCE 		001 A 18 015 800 40  -
LENS-HD.SHEET METAL SCREW
B 3,5X6,5 DIN 7981 FOR COMPENSATING RESISTANCE AT SUPPORTING PLATE 		002 -
171 CABLE
FOR COMPENSATING RESISTANCE, IGNITION COIL 		001 A 18 054 600 02  -
INSULATING HOSE,
210-MM LONG B 4X5 DIN 40621 FOR CABLE FROM COMPENSATING RESISTANCE, IGNITION COIL ORDER BY THE METER 		001 -
CONTACTOR 12 V
FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL
Zastąpiono przez: A  000 542 27 19 		001 A 00 054 215 19  -
CONTACTOR 12 V
FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL 		001 A 00 054 227 19  -
ELECTRIC CABLE
BLACK 80-MM LONG B 1 DIN 72551 FROM RELAY, TERMINAL 30 TO RELAY, TERMINAL 86 ORDER BY THE METER FOR CARS WITH BLINKER SY 		001 -
TERMINAL
4X0,8 N 261 FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL 		005 -
GROMMET
FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL 		005 A 00 099 701 81  -
172 CONTACTOR 12 V - A 00 054 227 19  -
LENS-HD.SCREW
AM 4X18 DIN 7985-4S FOR CONTACTOR AT LEFT WHEEL ARCH PAN 		- -
LOCK WASHER
B 4 DIN 127 FOR CONTACTOR AT LEFT WHEEL ARCH PAN 		- -
HEX. NUT
M 4 DIN 934-5 S FOR CONTACTOR AT LEFT WHEEL ARCH PAN 		- -
REPLACED BY
001 545 12 24 TOGETHER WITH 1 TIGHTENING WASHER 128 350 00 67 		- A 00 054 582 24  -
175 CONTROLS SWITCH
AT REAR AXLE SUSPENSION SIMPLICITY OF SPARE PARTS 		- A 00 154 512 24  -
GUIDE CUP - A 00 054 502 38  -
176 OPERATION ROD - A 00 054 500 78  -
177 TENSION SPRING - A 00 054 500 97  -
178 GUIDE CUP - A 00 054 502 38  -
HEX.-HD.SCREW
M 6X10 DIN 933-8 G FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION 		- -
WASHER
6,4 DIN 125 FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION 		- -
LOCK WASHER
B 6 DIN 127 FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION 		- -
ADDITIONAL CABLE HARNESS
FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) 		- A 18 054 019 09  -
ADDITIONAL CABLE HARNESS
FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) 		- A 18 054 020 09  -
TEMPERATURE SIGNAL LIGHT
AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) 		- A 00 054 568 15  -
TEMPERATURE SIGNAL LIGHT
WITH ENGLISH READING AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) 		- A 00 054 569 15  -
LAMP SOCKET
FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) 		- A 00 054 511 19  -
BULB
H 12 V 2 W DIN 72601 FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) 		- -
RUBBER PROTECTIVE CAP
FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) 		- A 00 015 900 85  -
LENS-HD.SHEET METAL SCREW
B 2,2 X 9,5 DIN 7981 FOR TEMPERATURE SIGNAL LIGHT AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE AL 		- -
Aby dowiedzieć się, gdzie kupić przedmiot lub jego odpowiednika, kliknij na numerze katalogowym.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA