Oil sump. crankcase. balancer ..
| № | Name | Ext. inf. | A* | Use of | Part number | A |
|---|---|---|---|---|---|---|
| crankcase oil sump balancer shaft petrol eng.+
CCZA |
petrol eng.+ CCZA |
|||||
| 1 | crankcase housing also use: see illustration, item: |
1 | 06H 103 011 AP | - | ||
| 2 | shaft oil seal | 1 | 06H 103 085 G | 9 | ||
| 3 | cylinder pin | 2 | 026 103 139 | - | ||
| 4 | oil spray jet | 4 | 06J 103 154 B | - | ||
| 5 | sealing flange D >> - 31.01.2011 |
1 | 06H 103 171 A | 11 | ||
| 5 | sealing flange | 1 | 06H 103 171 F | 13 | ||
| 6 | end cap | 1 | 06H 103 113 | - | ||
| 7 | dowel sleeve | 2 | 022 103 139 B | - | ||
| 8 | oil sump-lower part for vehicles with extended service interval D >> - 31.01.2011 |
1 | 06J 103 600 E | 9 | ||
| (8) | oil sump-lower part for vehicles with extended service interval D >> - 27.08.2012 |
1 | 06J 103 600 T | 8 | ||
| 8 | oil sump-lower part for vehicles with extended service interval |
1 | 06J 103 600 AF | 9 | ||
| - | silicone sealant | 1 | D 174 003 A2 | 3 | ||
| 9 | engine oil sump upper part | 1 | 06J 103 603 AF | - | ||
| 10 | cover plate | 1 | 06J 103 645 D | - | ||
| 11 | insert D >> - 30.06.2010 |
1 | 06J 103 138 M | - | ||
| 11 | insert | 1 | 06J 103 138 AE | - | ||
| 12 | non-return valve | 1 | 06H 103 156 | - | ||
| 13 | seal | 1 | 06J 103 147 | - | ||
| 14 | oval hexagon socket head bolt | 20 | N 910 967 01 | - | ||
| 15 | timing case | 1 | 06H 109 210 Q | - | ||
| 16 | bungs | 1 | 06H 115 418 D | - | ||
| 17 | oil pipe see illustration, item: |
|||||
| 18 | chain sprocket | 1 | 06H 103 319 Q | 3 | ||
| 19 | intermediate shaft D >> - 30.04.2011 |
1 | 06H 103 559 | - | ||
| (19) | intermediate shaft | 1 | 06H 103 559 A | - | ||
| 20 | oil level sensor see illustration, item: |
1 | 03C 907 660 M | - | ||
| 21 | cover see illustration, item: |
1 | 06B 907 667 | - | ||
| 23 | shaft oil seal | 1 | 06H 103 085 J | 5 | ||
| 24 | oil separator | 1 | 06H 103 464 L | - | ||
| 25 | seal | 1 | 06H 103 517 D | 4 | ||
| 26 | pipe | 1 | 06H 103 199 K | - | ||
| 27/28 | repair set for balancer shafts D >> - 30.11.2010 |
1 | 06H 198 205 A | - | ||
| 27/28 | repair set for balancer shafts |
1 | 06H 198 205 F | - | ||
| 30 | pulley D >> - 31.03.2013 |
1 | 06H 103 731 F | - | ||
| (30) | pulley D - 01.04.2013>> |
1 | 06H 103 731 G | - | ||
| 31 | toothed belt guard | 1 | 06H 109 121 G | - | ||
| 33 | o-ring | 1 | WHT 001 905 | - | ||
| 40 | socket head bolt with inner multipoint head |
1 | N 105 449 04 | 2 | ||
| 45 | end cap | 5 | N 011 910 4 | - | ||
| 46 | end cap D >> - 09.01.2012 |
1 | N 011 901 9 | - | ||
| (46) | end cap D - 10.01.2012>> |
1 | N 011 901 10 | - | ||
| 47 | end cap | 2 | N 011 907 8 | - | ||
| 48 | hexagon collar nut D >> - 30.11.2010 |
3 | N 015 082 13 | - | ||
| 48 | hexagon collar nut | 3 | N 015 082 10 | - | ||
| 50 | cylinder pin | 2 | N 106 171 01 | - | ||
| 51 | oval hexagon socket head bolt | 2 | N 101 562 06 | - | ||
| 52 | socket head bolt with inner multipoint head (kombi) |
8 | N 101 961 03 | - | ||
| (52) | oval hexagon socket head bolt | 2 | N 101 243 04 | - | ||
| 53 | end cap | 1 | N 909 829 01 | - | ||
| 53 | end cap | 1 | N 909 829 02 | - | ||
| 54 | screw with int. serrations | 11 | N 910 488 02 | 2 | ||
| 55 | hexagon socket head bolt |
2 | N 910 506 01 | - | ||
| 56 | o-ring see illustration, item: |
1 | WHT 003 463 | - | ||
| 57 | socket head bolt with inner multipoint head |
6 | N 910 639 01 | - | ||
| 58 | hexagon socket flat head bolt D >> - 11.10.2010 |
10 | N 910 733 01 | - | ||
| (58) | oval hexagon socket head bolt D - 12.10.2010>> |
10 | WHT 005 227 | - | ||
| (59) | control valve D >> - 31.01.2010 |
1 | 06H 115 243 E | - | ||
| 59 | control valve | 1 | 06H 115 243 J | - | ||
| 60 | oval hexagon socket head bolt | 15 | N 910 967 02 | - | ||
| 61 | seal bolt with sealing ring D >> - 21.11.2011 |
1 | N 911 014 02 | 2 | ||
| (61) | sealing plug use if required: D - 22.11.2011>> |
1 1 |
N 911 679 01 | 1 | ||
| 61 | sealing plug use if required: |
1 1 |
N 911 679 01 | 1 | ||
| 62 | socket head collared bolt with inner multipoint head |
10 | N 911 189 02 | - | ||
| 65 | silicone sealant | 1 | D 174 003 A2 | 3 | ||
| 65 | sealant | 1 | D 154 103 A1 | 3 | ||
| 67 | hexagon collared bolt with multi-point socket head (duo) |
1 | WHT 001 163 B | - | ||
| 68 | thrust washer | 1 | WHT 001 396 A | 2 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy