Oil sump. crankcase. balancer ..
| № | Name | Ext. inf. | A* | Use of | Part number | A |
|---|---|---|---|---|---|---|
| crankcase oil sump balancer shaft 4-cylinder+
petrol eng.+ CCTA |
4-cylinder+ petrol eng.+ CCTA |
|||||
| (1) | crankcase housing | 1 |
06H 103 011 AP | - | ||
| 2 | shaft oil seal | 1 | 06L 103 085 | 2 | ||
| 3 | cylinder pin | 2 | 026 103 139 | - | ||
| (4) | oil spray jet | 4 | 06F 103 154 | - | ||
| 5 | sealing flange | 1 | 06H 103 171 F | 13 | ||
| (6) | end cap | 1 |
06H 103 113 | - | ||
| 7 | dowel sleeve | 2 | 022 103 139 B | - | ||
| (8) | oil sump-lower part for vehicles with extended service interval |
1 | 06J 103 600 AF | 9 | ||
| - | silicone sealant adhesives and sealing compound |
1 | D 174 003 M2 | 3 | ||
| (9) | engine oil sump upper part | 1 | 06J 103 603 T | - | ||
| (10) | cover plate | 1 | 06J 103 645 | - | ||
| (11) | insert | 1 | 06J 103 138 F | - | ||
| 12 | non-return valve | 1 | 06H 103 156 | - | ||
| 13 | seal | 1 | 06J 103 147 | - | ||
| 14 | oval hexagon socket head bolt | 20 | N 910 967 01 | - | ||
| 15 | timing case | 1 | 06K 109 210 AE | - | ||
| 16 | bungs | 1 | 06H 115 418 D | - | ||
| 17 | oil pipe see illustration, item: |
|||||
| 18 | chain sprocket | 1 | 06H 103 319 Q | 3 | ||
| 19 | intermediate shaft | 1 | 06H 103 559 A | - | ||
| 20 | oil level sensor see illustration, item: |
|||||
| 21 | oil level sensor see illustration, item: |
|||||
| 23 | shaft oil seal | 1 | 06H 103 085 J | 5 | ||
| (24) | oil separator | 1 | 06H 103 464 L | - | ||
| (25) | seal | 1 | 06H 103 517 D | 4 | ||
| 26 | pipe | 1 | 06H 103 199 K | - | ||
| 27 | repair set for balancer shafts CCTA
|
CCTA | 1 | 06H 198 205 N | - | |
| 28 | balancer shaft included in position: CCTA
|
CCTA | 1 | |||
| 30 | pulley | 1 | 06H 103 731 G | - | ||
| 31 | toothed belt guard | 1 | 06H 109 121 G | - | ||
| 33 | o-ring | 1 | WHT 001 905 | - | ||
| 40 | socket head bolt with inner multipoint head |
1 | N 105 449 04 | 2 | ||
| 45 | end cap | 5 | N 011 910 4 | - | ||
| 46 | end cap | 1 | N 011 901 9 | - | ||
| 47 | end cap | 2 | N 011 907 8 | - | ||
| 48 | hexagon collar nut | 3 | N 015 082 10 | - | ||
| 50 | cylinder pin | 2 | N 106 171 01 | - | ||
| 51 | oval hexagon socket head bolt | 2 | N 101 562 06 | - | ||
| 52 | socket head bolt with inner multipoint head (kombi) |
7 | N 101 961 03 | - | ||
| (52) | oval hexagon socket head bolt | 3 | N 101 243 04 | - | ||
| 53 | end cap also use: |
1 |
N 909 829 02 | - | ||
| (54) | screw with int. serrations | 12 | N 910 488 02 | 2 | ||
| 55 | hexagon socket head bolt |
2 | N 910 506 01 | - | ||
| 56 | see illustration, item: | |||||
| 57 | socket head bolt with inner multipoint head |
6 | N 911 875 01 | - | ||
| 58 | hexagon socket flat head bolt |
10 | N 910 733 01 | - | ||
| (59) | control valve not for this model |
1 |
||||
| - | o-ring to be used for item: |
1 | N 910 568 01 | - | ||
| 60 | oval hexagon socket head bolt | 15 | N 910 967 02 | - | ||
| 61 | sealing plug also use: |
1 1 |
N 911 679 01 | 1 | ||
| - | o-ring | 1 | N 013 815 7 | 10 | ||
| 62 | socket head collared bolt with inner multipoint head |
10 | N 911 189 02 | - | ||
| 65 | silicon sealant adhesives and sealing compound |
1 | D 176 501 A1 | 3 | ||
| (65) | sealant adhesives and sealing compound |
1 | D 154 103 A1 | 3 | ||
| 67 | hexagon collared bolt with multi-point socket head (duo) |
1 | WHT 001 163 B | - | ||
| 68 | thrust washer | 1 | WHT 001 396 | - | ||
| 69 | socket head bolt with hexagon socket head (combination) |
1 | N 104 514 09 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy