High-pressure rail/injector/line
| № | Name | Ext. inf. | A* | Part number |
|---|---|---|---|---|
| 01 | INJECTION TUBE1-4 | 1-4 | 1 | 13 53 7547599 |
| Observe following PuMA measure: | ||||
| 54339610 | ||||
| 02 | Sensor, high-pressure | 2 | 13 53 7537319 | |
| 03 | Hex BoltM7X18-U1 | M7X18-U1 | 8 | 13 53 7581066 |
| 04 | INJECTION TUBE5-8 | 5-8 | 1 | 13 53 7547600 |
| 05 | High pressure pipe1-4 | 1-4 | 4 | 13 53 7547601 |
| 06 | High pressure pipe1-4 | 1-4 | 1 | 13 53 7548711 |
| 07 | Injector | 8 | 13 53 8616079 | |
| -- | Decoupling element | 8 | 13 53 7564751 | |
| 08 | Gasket ring | 8 | 13 53 7584315 | |
| 09 | Decoupling element | 8 | 13 53 7564751 | |
| 10 | Bracket injector | 4 | 13 64 7598000 | |
| 11 | Hex BoltM7X18-U1 | M7X18-U1 | 4 | 13 53 7581066 |
| 12 | High pressure pipe5-8 | 5-8 | 4 | 13 53 7548709 |
| 13 | High pressure pipe5-8 | 5-8 | 1 | 13 53 7548712 |
| 14 | Damping element | 2 | 13 53 7589502 | |
| 15 | Socket housing | 2 | 12 52 7606573 | |
| -- | Jack SLK 2.8 ELA with cable0,5- 1,0 MM² SN | 0,5- 1,0 MM² SN | 2 | 12 52 0007172 |
| -- | Socket contact SLK 2.81,0-2,5MM²/SN | 1,0-2,5MM²/SN | 2 | 12 52 1433217 |
| -- | Strand seal0,25-1,0MM² | 0,25-1,0MM² | 2 | 12 52 1748973 |
| -- | Strand seal1,0-2,5MM² | 1,0-2,5MM² | 2 | 12 52 1748974 |
| 16 | Socket housing | 8 | 12 52 7507529 | |
| -- | Jack MLK 1.20,25-0,5MM²/SN | 0,25-0,5MM²/SN | 16 | 12 52 7510668 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy