Intake manifold system
| № | Name | Ext. inf. | A* | Part number |
|---|---|---|---|---|
| 01 | Intake manifold | 1 | 11 61 7559523 | |
| 02 | Adjuster unit | 1 | 11 61 7579114 | |
| 03 | Adjuster unit | 1 | 11 61 7560538 | |
| 04 | Set of profile gaskets | 1 | 11 61 7547242 | |
| 05 | Hex Bolt with washerM7X50-U1 | M7X50-U1 | 4 | 07 11 9903918 |
| 06 | Hex nut with plateAM7 ZNNIV SI | AM7 ZNNIV SI | 6 | 07 12 9905541 |
| 07 | Angle connector | 1 | 11 61 7561408 | |
| 07 | Angle connector | 1 | 11 61 8638014 | |
| 08 | O-ring23,6X3,55 | 23,6X3,55 | 1 | 11 61 7533329 |
| 09 | Bracket ventilation valve | 1 | 11 61 7572643 | |
| 10 | Oval head screwM6X10 | M6X10 | 2 | 11 61 7536248 |
| 11 | Bracket, cable harness | 1 | 11 61 7530272 | |
| 12 | Differential pressure sensor | 1 | 13 62 8617097 | |
| 13 | O-ring | 1 | 13 62 7515272 | |
| 15 | FUEL PIPE BRACKET | 1 | 11 61 7532072 | |
| 16 | Screw5X20 | 5X20 | 14 | 11 61 7535849 |
| 17 | Screw50X35 | 50X35 | 2 | 11 61 7535850 |
| 18 | Screw50X66 | 50X66 | 1 | 11 61 7535851 |
| 21 | Cable clamp | 1 | 61 13 8368029 | |
| 22 | FUEL PIPE BRACKET | 1 | 11 61 7572629 | |
| -- | Tubing support | 1 | 13 31 1714453 | |
| 23 | Pipe clip | 1 | 13 53 7561748 | |
| 24 | Socket housing, blue | 1 | 12 52 7507526 | |
| -- | Jack MLK 1.20,25-0,5 MM²/AG | 0,25-0,5 MM²/AG | 1 | 12 52 7502932 |
| -- | Rubber grommet | 1 | 12 52 7503411 | |
| 25 | Socket housing, blue | 1 | 12 52 7507526 | |
| -- | Sealing grommet 0.5-0.75MM² | 0.5-0.75MM² | 1 | 61 13 8366245 |
| -- | Jack MLK 1.20,25-0,5 MM²/AG | 0,25-0,5 MM²/AG | 1 | 12 52 7502932 |
| 26 | Socket housing | 1 | 12 52 7507529 | |
| -- | Rubber grommet | 1 | 12 52 7503411 | |
| -- | Jack MLK 1.20,25-0,5MM²/SN | 0,25-0,5MM²/SN | 2 | 12 52 7510668 |
| 27 | Socket housing | 1 | 12 52 7507257 | |
| -- | Jack SLK 2.8 ELA0,22-0,5MM² AG | 0,22-0,5MM² AG | 3 | 12 52 1427612 |
| -- | Strand seal0,25-1,0MM² | 0,25-1,0MM² | 1 | 12 52 1748973 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy