| №- | Nombre | C* | Número de pieza | A |
|---|---|---|---|---|
REAR AXLE |
- | XXX XXX XXX XXXX | - | |
| REAR AXLE, RATIO 1:4.10 Sustituido por: A 180 350 14 00 |
- | A 18 035 012 00 | - | |
| 001 | REAR AXLE, RATIO 1:4.10 | 001 | A 18 035 014 00 | - |
| REAR AXLE, RATIO 1:4.10 | 001 | A 18 035 013 00 | - | |
| REAR AXLE HOUSING WITH LEFT REAR AXLE TUBE, WITHOUT SLIDING JOINT, WITHOUT RIGHT REAR AXLE TUBE AND WITHOUT REAR AXLE SHAFTS, RATI |
001 | A 18 035 010 00 | - | |
REAR AXLE HOUSING |
- | XXX XXX XXX XXXX | - | |
| 002 | REAR AXLE HOUSING | 001 | A 18 035 001 20 | - |
| 003 | SCREW PLUG FOR OIL DRAINING AND OIL FILLING IN |
002 | A 18 699 700 32 | - |
DIFFERENTIAL GEAR |
- | XXX XXX XXX XXXX | - | |
| 004 | DIFFERENTIAL GEAR, WITHOUT TAPERED ROLLER BEARING RATIO 1:4,10 |
001 | A 18 035 005 23 | - |
| DIFFERENTIAL GEAR, WITHOUT TAPERED ROLLER BEARING RATIO 1:4.10 |
001 | A 18 035 006 23 | - | |
| 005 | DIFFERENTIAL GEAR HOUSING | 001 | A 18 035 305 01 | - |
| 006 | GUARD PLATE 1,3 MM THICK OPTIONAL |
002 | A 18 035 310 62 | - |
| GUARD PLATE 1.4 MM THICK OPTIONAL |
002 | A 18 035 311 62 | - | |
| GUARD PLATE 1.5 MM THICK OPTIONAL |
002 | A 18 035 312 62 | - | |
| GUARD PLATE 1.6 MM THICK OPTIONAL |
002 | A 18 035 313 62 | - | |
| GUARD PLATE 1.7 MM THICK OPTIONAL |
002 | A 18 035 314 62 | - | |
| REAR AXLE SIDE GEAR, LEFT, 16 TEETH Sustituido por: A 180 353 08 15 |
- | A 18 035 305 15 | - | |
| 007 | REAR AXLE SIDE GEAR, LEFT, 16 TEETH |
001 | A 18 035 308 15 | - |
Sustituido por: A 128 353 00 15 |
- | A 18 035 307 15 | - | |
| REAR AXLE SIDE GEAR, LEFT, 16 TEETH Sustituido por: A 128 353 00 15 |
- | A 18 035 309 15 | - | |
| REAR AXLE SIDE GEAR, LEFT, 16 TEETH |
001 | A 12 835 300 15 | - | |
| 008 | REAR AXLE SIDE GEAR, RIGHT, 16 TEETH |
001 | A 18 035 003 40 | - |
| REAR AXLE SIDE GEAR, RIGHT, 16 TEETH Sustituido por: A 128 350 00 40 |
- | A 18 035 004 40 | - | |
| REAR AXLE SIDE GEAR, RIGHT, 16 TEETH |
001 | A 12 835 000 40 | - | |
| SPIDER GEAR, 10 TEETH Sustituido por: A 180 353 00 14 |
- | A 18 335 300 14 | - | |
| 009 | SPIDER GEAR, 10 TEETH | 002 | A 18 035 300 14 | - |
| SPHERICAL WASHER FOR SPIDER GEAR Sustituido por: A 180 353 00 24 |
- | A 13 635 305 24 | - | |
| 010 | SPHERICAL WASHER FOR SPIDER GEAR |
002 | A 18 035 300 24 | - |
| 011 | DIFFERENTIAL PIN FOR SPIDER GEAR |
001 | A 18 035 300 21 | - |
| 012 | LOCKING PIN FOR DIFFERENTIAL PIN |
001 | A 13 635 302 74 | - |
| 013 | DRIVE PINION WITH RING GEAR RATIO 1:4.10 |
001 | A 18 035 002 39 | - |
| 014 | LOCKING PLATE FOR RING GEAR AT SPIDER GEAR HOUSING |
008 | A 12 099 400 10 | - |
| 015 | HEX. -HD. SCREW FOR RING GEAR AT SPIDER GEAR HOUSING |
008 | A 18 399 001 01 | - |
| 016 | TAPERED ROLLER BEARING | 002 | A 00 098 114 05 | - |
| 017 | THREADED RING FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 308 25 | - |
| 018 | THREADED RING FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 306 25 | - |
| 019 | LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 301 73 | - |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 302 73 | - | |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 303 73 | - | |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 305 73 | - | |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 306 73 | - | |
| 020 | LOCKING PLATE | 001 | A 18 099 400 30 | - |
| 021 | HEX.-HD.SCREW M 6X12 DIN 933-8 G |
002 | - | |
| 022 | LOCKING PLATE FOR THREADED RING REAR AXLE TUBE, LEFT |
001 | A 18 099 401 10 | - |
| 023 | LOCKING SCREW FOR THREADED RING REAR AXLE TUBE, LEFT |
001 | A 18 099 002 15 | - |
| 024 | CYLINDER ROLLER BEARING | 001 | A 00 098 116 01 | - |
| 025 | SPACER SLEEVE | 001 | A 18 035 300 40 | - |
| 026 | PRESSURE RING | 001 | A 18 035 301 48 | - |
| 027 | ANGULAR CONTACT BEARING | 001 | A 00 098 104 27 | - |
| 028 | SHOULDER RING | 001 | A 18 035 300 63 | - |
| 029 | COVER FOR REAR AXLE HOUSING, FRONT |
001 | A 18 035 303 08 | - |
| 030 | SEALING RING FOR REAR AXLE HOUSING, FRONT |
001 | A 00 099 713 46 | - |
| 031 | JOINT FLANGE FOR DRIVE PLATE |
001 | A 18 035 001 45 | - |
| 032 | GROOVED NUT FOR DRIVE PLATE |
001 | A 12 035 000 66 | - |
| 033 | LOCK FOR DRIVE PLATE |
001 | A 12 099 400 44 | - |
| 034 | SNAP RING, REAR | 001 | A 12 099 402 35 | - |
| 035 | SNAP RING, FRONT 80 DIN 9045 |
001 | - | |
| 036 | ADJUSTING SCREW FOR PRESSURE RING |
002 | A 18 335 101 70 | - |
| 037 | LOCKING PLATE 15 DIN 93 FOR ADJUSTING SCREW |
002 | - | |
| 038 | HEX. NUT FOR ADJUSTING SCREW |
002 | A 18 099 001 50 | - |
| 039 | SHIM 1.00 MM THICK OPTIONAL |
001 | A 12 035 324 52 | - |
| SHIM 1.10 MM THICK OPTIONAL |
001 | A 12 035 326 52 | - | |
| SHIM 1.20 MM THICK OPTIONAL |
001 | A 12 035 328 52 | - | |
| SHIM 1.30 MM THICK OPTIONAL |
001 | A 12 035 330 52 | - | |
| SHIM 1.40 MM THICK OPTIONAL |
001 | A 12 035 332 52 | - | |
| SHIM 1.50 MM THICK OPTIONAL |
001 | A 12 035 334 52 | - | |
| SHIM 1.60 MM THICK OPTIONAL |
001 | A 12 035 336 52 | - | |
| SHIM 1.70 MM THICK OPTIONAL |
001 | A 12 035 338 52 | - | |
| SHIM 1.80 MM THICK OPTIONAL |
001 | A 12 035 340 52 | - | |
| SHIM 1.90 MM THICK OPTIONAL |
001 | A 12 035 342 52 | - | |
| SHIM 2.00 MM THICK OPTIONAL |
001 | A 12 035 344 52 | - | |
| SHIM 2.05 MM THICK OPTIONAL |
001 | A 12 035 345 52 | - | |
| 040 | LOCK WASHER B 7 DIN 127 FOR COVER, SEALING RING, FRONT AT REAR AXLE HOUSING |
006 | - | |
| 041 | HEX. -HD. SCREW M 7X20 DIN 931-10K FOR COVER, SEALING RING, FRONT AT REAR AXLE HOUSING |
006 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy