| №- | Nombre | C* | Número de pieza | A |
|---|---|---|---|---|
PROPELLER SHAFT |
- | XXX XXX XXX XXXX | - | |
Sustituido por: A 121 410 17 03 |
- | A 12 141 002 03 | - | |
Sustituido por: A 121 410 17 03 |
- | A 12 141 004 06 | - | |
Sustituido por: A 121 410 17 03 |
- | A 12 141 006 03 | - | |
| SPLIT PROPELLER SHAFT, COMPLETE, WITH INTERMEDIATE BEARING, WITHOUT BEARING BRACKET, RUBBER MOUNTING AND CENTERING CROSS (PROPELLER SHA Sustituido por: A 121 410 17 03 |
- | A 12 141 015 03 | - | |
| SPLIT PROPELLER SHAFT, COMPLETE, WITH INTERMEDIATE BEARING, WITHOUT BEARING BRACKET, RUBBER MOUNTING AND CENTERING CROSS (PROPELLER SHA |
001 | A 12 141 017 03 | - | |
Sustituido por: A 121 410 20 03 |
- | A 12 141 008 03 | - | |
Sustituido por: A 121 410 20 03 |
- | A 12 141 016 03 | - | |
Sustituido por: A 121 410 20 03 |
- | A 12 141 002 06 | - | |
| SPLIT PROPELLER SHAFT, COMPLETE, WITH INTERMEDIATE BEARING, WITHOUT BEARING BRACKET, RUBBER MOUNTING AND CENTERING CROSS (PROPELLER SHA Sustituido por: A 121 410 20 03 |
- | A 12 141 014 03 | - | |
| 001 | SPLIT PROPELLER SHAFT, COMPLETE, WITH INTERMEDIATE BEARING, WITHOUT BEARING BRACKET, RUBBER MOUNTING AND CENTERING CROSS (PROPELLER SHA |
001 | A 12 141 020 03 | - |
Sustituido por: A 180 410 16 01 |
- | A 12 141 001 01 | - | |
Sustituido por: A 180 410 16 01 |
- | A 12 141 003 01 | - | |
| PROPELLER SHAFT, FRONT, WITH JOINT, (PROPELLER SHAFT CONNECTION FLANGE, 80-MM-DIA. HOLE CIRCLE) Sustituido por: A 180 410 16 01 |
- | A 18 041 010 01 | - | |
| PROPELLER SHAFT, FRONT, WITH JOINT, (PROPELLER SHAFT CONNECTION FLANGE, 80-MM-DIA. HOLE CIRCLE) |
001 | A 18 041 016 01 | - | |
Sustituido por: A 180 410 18 01 |
- | A 18 041 011 01 | - | |
| PROPELLER SHAFT, FRONT, WITH JOINT (PROPELLER SHAFT CONNECTION FLANGE, 90-MM-DIA. HOLE CIRCLE) Sustituido por: A 180 410 18 01 |
- | A 18 041 014 01 | - | |
| 002 | PROPELLER SHAFT, FRONT, WITH JOINT (PROPELLER SHAFT CONNECTION FLANGE, 90-MM-DIA. HOLE CIRCLE) |
001 | A 18 041 018 01 | - |
| 003 | GREASE NIPPLE A 6 DIN 71 412 |
001 | - | |
| 004 | PRESSURE RELIEF VALVE | 001 | A 12 299 700 87 | - |
| 005 | JOINT FLANGE | 001 | A 18 841 100 44 | - |
| UNIVERSAL CROSS WITH NEEDLES AND NEEDLE BEARING BUSHINGS |
001 | A 18 041 001 31 | - | |
| GREASE NIPPLE | 001 | A 12 099 701 88 | - | |
| UNIVERSAL CROSS WITH NEEDLES AND NEEDLE BEARING BUSHINGS (SERVICE-FREE) Sustituido por: A 111 410 00 31 |
- | A 18 041 003 31 | - | |
| 006 | UNIVERSAL CROSS WITH NEEDLES AND NEEDLE BEARING BUSHINGS (SERVICE-FREE) |
001 | A 11 141 000 31 | - |
| 007 | GREASE NIPPLE | 001 | A 12 299 700 88 | - |
| LOCK RING 26X1,2 DIN 472 OPTIONAL |
004 | - | ||
| LOCK RING OPTIONAL |
004 | A 18 099 400 41 | - | |
| LOCK RING OPTIONAL |
004 | A 18 099 401 41 | - | |
| LOCK RING OPTIONAL |
004 | A 18 099 402 41 | - | |
| SNAP RING OPTIONAL |
004 | A 18 099 408 34 | - | |
| SNAP RING OPTIONAL |
004 | A 18 099 409 34 | - | |
| SNAP RING OPTIONAL |
004 | A 18 099 410 34 | - | |
| SNAP RING, 1.45 MM THICK OPTIONAL |
004 | A 18 899 405 34 | - | |
| 008 | SNAP RING, 1.5 MM THICK OPTIONAL |
004 | A 18 899 400 34 | - |
| SNAP RING, 1.6 MM THICK OPTIONAL |
004 | A 18 899 402 34 | - | |
| SNAP RING, 1.65 MM THICK OPTIONAL |
004 | A 18 899 403 34 | - | |
| SNAP RING, 1.70 MM THICK OPTIONAL |
004 | A 18 899 404 34 | - | |
Sustituido por: A 121 410 26 02 |
- | A 12 141 006 02 | - | |
Sustituido por: A 121 410 26 02 |
- | A 12 141 014 02 | - | |
| PROPELLER SHAFT, REAR, WITH BEARING Sustituido por: A 121 410 26 02 |
- | A 12 141 024 02 | - | |
| 010 | PROPELLER SHAFT, REAR, WITH BEARING |
001 | A 12 141 026 02 | - |
| REPLACED BY TOGETHER WITH 1 RUBBER MOUNTING 180 413 02 01 180 413 02 12 |
- | A 18 041 301 01 | - | |
| 011 | HOUSING | 001 | A 18 041 302 01 | - |
| REPLACED BY 6006 X-C 3 DIN 625 6006 X DIN 625 |
- | - | ||
| 012 | GROOVED BALL BEARING 6006 X-C 3 DIN 625 |
001 | - | |
| REPLACED BY 110 413 00 51 TOGETHER WITH 2 COMPRESSION RING 110 413 00 80 |
- | A 18 041 300 51 | - | |
| REPLACED BY 110 413 00 51 TOGETHER WITH 2 COMPRESSION RING 110 413 00 80 |
- | A 18 041 301 51 | - | |
| REPLACED BY 110 413 00 51 TOGETHER WITH 2 COMPRESSION RING 110 413 00 80 |
- | A 18 041 300 51 | - | |
| 013 | SPACER RING | 002 | A 11 041 300 51 | - |
| 014 | SEAL RING TO 180 413 01 51 SPACER RING |
002 | A 18 099 703 40 | - |
| 015 | LOCK RING 55X2 DIN 472 |
002 | - | |
| 016 | GREASE NIPPLE A 6 DIN 71 412 |
001 | - | |
| 017 | JOINT FLANGE | 001 | A 18 641 109 45 | - |
| REPLACED BY TOGETHER WITH 2 SPACER RING 110 413 00 80 110 413 00 51 A 40X3 AC DIN 73 102 |
- | - | ||
| 018 | COMPRESSION RING | 002 | A 11 041 300 80 | - |
| 019 | LOCK PLATE | 001 | A 18 299 400 43 | - |
| 020 | GROOVED NUT | 001 | A 18 699 000 60 | - |
| 021 | SPLINED HUB | 001 | A 18 041 015 28 | - |
| 022 | UNIVERSAL JOINT FLANGE | 001 | A 18 841 100 44 | - |
| UNIVERSAL CROSS | 001 | A 18 041 001 31 | - | |
| GREASE NIPPLE | 001 | A 12 099 701 88 | - | |
| UNIVERSAL CROSS Sustituido por: A 111 410 00 31 |
- | A 18 041 003 31 | - | |
| 023 | UNIVERSAL CROSS | 001 | A 11 141 000 31 | - |
| 024 | GREASE NIPPLE | 001 | A 12 299 700 88 | - |
| LOCK RING 26X1,2 DIN 472 OPTIONAL |
004 | - | ||
| LOCK RING OPTIONAL |
004 | A 18 099 400 41 | - | |
| LOCK RING OPTIONAL |
004 | A 18 099 401 41 | - | |
| LOCK RING OPTIONAL |
004 | A 18 099 402 41 | - | |
| SNAP RING OPTIONAL |
004 | A 18 099 408 34 | - | |
| SNAP RING OPTIONAL |
004 | A 18 099 409 34 | - | |
| SNAP RING OPTIONAL |
004 | A 18 099 410 34 | - | |
| 025 | SNAP RING, 1.5 MM THICK OPTIONAL |
004 | A 18 899 400 34 | - |
| SNAP RING, 1.6 MM THICK OPTIONAL |
004 | A 18 899 402 34 | - | |
| SNAP RING, 1.65 MM THICK OPTIONAL |
004 | A 18 899 403 34 | - | |
| SNAP RING, 1.70 MM THICK OPTIONAL |
004 | A 18 899 404 34 | - | |
| 026 | GREASE NIPPLE A 6 DIN 71 412 |
001 | - | |
| 026 | GREASE NIPPLE A 6 DIN 71 412 |
- | - | |
| GREASE NIPPLE | 001 | A 00 099 708 88 | - | |
| GREASE NIPPLE | - | A 00 099 708 88 | - | |
| 027 | HEX. HEAD SCREW FRONT PROPELLER SHAFT TO REAR PROPELLER SHAFT |
006 | A 18 299 000 01 | - |
| 028 | LOCK PLATE FRONT PROPELLER SHAFT TO REAR PROPELLER SHAFT |
003 | A 18 699 403 25 | - |
| 029 | HEX. NUT M 8 DIN 934-5 S FRONT PROPELLER SHAFT TO REAR PROPELLER SHAFT |
006 | - | |
| 030 | SEAL RING (BETWEEN PROPELLER SHAFT AND CENTERING CROSS) |
001 | A 18 099 710 40 | - |
| CENTERING CROSS, 80-MM-DIA. HOLE CIRCLE |
001 | A 12 041 010 30 | - | |
Sustituido por: A 111 410 01 30 |
- | A 18 641 004 30 | - | |
| CENTERING CROSS, 90-MM-DIA. HOLE CIRCLE Sustituido por: A 111 410 01 30 |
- | A 18 641 006 30 | - | |
| 031 | CENTERING CROSS, 90-MM-DIA. HOLE CIRCLE |
001 | A 11 141 001 30 | - |
| BALL SOCKET Sustituido por: A 136 411 01 18 |
- | A 13 641 100 18 | - | |
| 032 | BALL SOCKET | 002 | A 13 641 101 18 | - |
| 033 | CENTERING BALL | 001 | A 18 441 100 17 | - |
| 034 | PRESSURE SPRING | 001 | A 18 499 304 01 | - |
| EXPANSION PLUG 30 DIN 470 |
001 | - | ||
| LOCK PLATE TO 186 410 06 30 |
001 | A 18 041 100 76 | - | |
| 035 | LOCK PLATE TO 111 410 01 30 |
001 | A 11 141 100 76 | - |
| 036 | LOCK RING 30X1,2 DIN 472 TO 111 410 01 30 |
001 | - | |
| FITTED SCREW JOINT DISC TO FRONT PROPELLER SHAFT |
003 | A 13 641 100 71 | - | |
| WASHER 10,5 DIN 125 JOINT DISC TO FRONT PROPELLER SHAFT |
003 | - | ||
| CASTLE NUT M 10 DIN 937-5 S JOINT DISC TO FRONT PROPELLER SHAFT |
003 | - | ||
| 037 | FITTED SCREW JOINT DISC TO FRONT PROPELLER SHAFT |
003 | A 18 641 105 71 | - |
| 038 | WASHER JOINT DISC TO FRONT PROPELLER SHAFT |
003 | A 18 799 014 40 | - |
| 039 | CASTLE NUT M 12X1,5 DIN 937-5 S JOINT DISC TO FRONT PROPELLER SHAFT |
003 | - | |
| RUBBER MOUNTING FOR PROPELLER SHAFT INTERMEDIATE BEARING Sustituido por: A 180 413 02 12 |
- | A 18 041 301 12 | - | |
| 040 | RUBBER MOUNTING FOR PROPELLER SHAFT INTERMEDIATE BEARING |
001 | A 18 041 302 12 | - |
| BEARING BRACKET (FOR PROPELLER SHAFT INTERMEDIATE BEARING) Sustituido por: A 180 410 03 39 |
- | A 18 041 002 39 | - | |
| 041 | BEARING BRACKET (FOR PROPELLER SHAFT INTERMEDIATE BEARING) |
001 | A 18 041 003 39 | - |
| JOINT DISC, 80-MM-DIA. HOLE CIRCLE |
001 | A 18 041 105 15 | - | |
| 045 | JOINT DISC, 90-MM-DIA. HOLE CIRCLE |
001 | A 18 041 106 15 | - |
| 046 | SEAL RING (PROPELLER SHAFT TO TRANSMISSION) |
001 | A 12 041 100 60 | - |
| FITTED SCREW JOINT DISC COUPLING TO TRANSMISSION |
003 | A 13 641 101 71 | - | |
| WASHER JOINT DISC COUPLING TO TRANSMISSION |
006 | A 13 641 103 52 | - | |
| CASTLE NUT M 10 DIN 937-5 S JOINT DISC COUPLING TO TRANSMISSION |
003 | - | ||
| COTTER PIN 2X25 DIN 94 JOINT DISC COUPLING TO TRANSMISSION |
006 | - | ||
| 050 | FITTED SCREW JOINT DISC COUPLING TO TRANSMISSION |
003 | A 18 641 101 71 | - |
| 051 | WASHER JOINT DISC COUPLING TO TRANSMISSION |
006 | A 18 799 014 40 | - |
| 052 | CASTLE NUT M 12X1,5 DIN 937-5 S JOINT DISC COUPLING TO TRANSMISSION |
003 | - | |
| COTTER PIN 3X28 DIN 94 JOINT DISC COUPLING TO TRANSMISSION |
006 | - | ||
| 053 | HEX. HEAD SCREW PROPELLER SHAFT TO REAR AXLE |
006 | A 18 299 000 01 | - |
| 054 | LOCK PLATE PROPELLER SHAFT TO REAR AXLE |
003 | A 18 699 403 25 | - |
| 055 | HEX, NUT M 8 DIN 934-5 S PROPELLER SHAFT TO REAR AXLE |
006 | - | |
| TOOTHED WASHER A 8,4 DIN 6797 INTERMEDIATE BEARING TO FRAME |
002 | - | ||
| HEX. HEAD SCREW M 8X18 DIN 933-8 G INTERMEDIATE BEARING TO FRAME |
002 | - | ||
| WASHER A 8,4 DIN 9021 INTERMEDIATE BEARING TO FRAME |
002 | - | ||
| 056 | WASHER INTERMEDIATE BEARING TO FRAME |
002 | A 18 041 102 62 | - |
| COVER PLATE FOR RUBBER MOUNTING |
001 | A 12 041 304 61 | - | |
| 059 | COVER PLATE FOR RUBBER MOUNTING |
001 | A 12 141 300 61 | - |
| HEX. HEAD SCREW M 8X12 DIN 933-8 G COVER PLATE TO INTERMEDIATE BEARING |
001 | - | ||
| LOCK WASHER B 8 DIN 127 COVER PLATE TO INTERMEDIATE BEARING |
001 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy