| №- | Nombre | C* | Número de pieza | A |
|---|---|---|---|---|
SINGLE JOINT REAR AXLE FROM CHASSIS 5514468 |
- | XXX XXX XXX XXXX | - | |
| REAR AXIE WITH THRUST ARM AND ADJUSTABLE HAND BRAKE CABLE, RATIO 1:3.7 PROPELLER SHAFT CONNECTION FLANGE, DIA. OF BOLTHOLE CIRCLE |
001 | A 12 035 042 00 | - | |
| REPLACED BY 121 350 10 00 TOGETHER WITH 1 RUBBER MOUNTING 121 351 01 86 PROPELLER SHAFT CONNECTION FLANGE, DIA. OF BOLTHOLE CIRCLE 9 |
- | A 12 035 056 00 | - | |
| 001 | REAR AXLE WITH THRUST ARM AND ADJUSTABLE HAND BRAKE CABLE, RATIO 1:3.7 PROPELLER SHAFT CONNECTION FLANGE, DIA. OF BOLTHOLE CIRCLE |
001 | A 12 135 010 00 | - |
| REAR AXLE WITH THRUST ARM AND ADJUSTABLE HAND BRAKE CABLE, RATIO 1:4.10 PROPELLER SHAFT CONNECTION FLANGE, DIA. OF BOLTHOLE CIRCLE |
001 | A 12 035 058 00 | - | |
| REPLACED BY 121 350 12 00 TOGETHER WITH 1 RUBBER MOUNTING 121 351 01 86 PROPELLER SHAFT CONNECTION FLANGE, DIA. OF BOLTHOLE CIRCLE 9 |
- | A 12 035 050 00 | - | |
| REAR AXLE WITH THRUST ARM AND ADJUSTABLE HAND BRAKE CABLE, RATIO 1:4.10 PROPELLER SHAFT CONNECTION FLANGE, DIA. OF BOLTHOLE CIRCLE |
001 | A 12 135 012 00 | - | |
| REAR AXLE HOUSING WITH LEFT REAR AXLE TUBE, WITHOUT SLIDING JOINT, RIGHT REAR AXLE TUBE AND REAR AXLE SHAFTS, RATIO 1:3.7 SHAFT CO |
001 | A 12 035 013 20 | - | |
| REAR AXLE HOUSING WITH LEFT REAR AXLE TUBE, WITHOUT SLIDING JOINT, RIGHT REAR AXLE TUBE AND REAR AXLE SHAFTS, RATIO 1:3.7 SHAFT CO |
001 | A 12 035 014 20 | - | |
REAR AXLE HOUSING |
- | XXX XXX XXX XXXX | - | |
| REAR AXLE HOUSING Sustituido por: A 180 350 01 20 |
- | A 18 035 000 20 | - | |
| 002 | REAR AXLE HOUSING | 001 | A 18 035 001 20 | - |
| 003 | SCREW PLUG FOR OIL DRAINING AND OIL FILLING IN |
002 | A 18 699 700 32 | - |
DIFFERENTIAL GEAR |
- | XXX XXX XXX XXXX | - | |
| 004 | DIFFERENTIAL GEAR RATIO 1:3.7 WITHOUT TAPERED ROLLER BEARING FROM REAR AXLE 5514590 FROM CHASSIS 5514468 |
001 | A 12 135 001 23 | - |
| DIFFERENTIAL GEAR RATIO 1:4.10 WITHOUT TAPERED ROLLER BEARING SPECIAL REQUEST |
001 | A 18 035 005 23 | - | |
| 005 | DIFFERENTIAL GEAR HOUSING | 001 | A 18 035 305 01 | - |
| 006 | GUARD PLATE, 1.3 MM THICK OPTIONAL |
002 | A 18 035 310 62 | - |
| GUARD PLATE, 1.4 MM THICK OPTIONAL |
002 | A 18 035 311 62 | - | |
| GUARD PLATE, 1.5 MM THICK OPTIONAL |
002 | A 18 035 312 62 | - | |
| GUARD PLATE, 1.6 MM THICK OPTIONAL |
002 | A 18 035 313 62 | - | |
| GUARD PLATE, 1.7 MM THICK OPTIONAL |
002 | A 18 035 314 62 | - | |
| REAR AXLE SIDE GEAR, LEFT, 16 TEETH Sustituido por: A 180 353 08 15 |
- | A 18 035 305 15 | - | |
| 007 | REAR AXLE SIDE GEAR, LEFT, 16 TEETH |
001 | A 18 035 308 15 | - |
| 008 | REAR AXLE SIDE GEAR, RIGHT, 16 TEETH UP TO REAR AXLE 9510107 FROM 9516306 |
001 | A 18 035 003 40 | - |
| REAR AXLE SIDE GEAR, RIGHT, 16 TEETH FROM REAR AXLE 9510108 TO 9516305 |
001 | A 12 835 000 40 | - | |
| SPIDER GEAR, 10 TEETH Sustituido por: A 180 353 00 14 |
- | A 18 335 300 14 | - | |
| 009 | SPIDER GEAR, 10 TEETH | 002 | A 18 035 300 14 | - |
| SPH. WASHER FOR SPIDER GEAR Sustituido por: A 180 353 00 24 |
- | A 13 635 305 24 | - | |
| 010 | SPH. WASHER FOR SPIDER GEAR |
002 | A 18 035 300 24 | - |
| 011 | DIFFERENTIAL PIN FOR SPIDER GEAR |
001 | A 18 035 300 21 | - |
| 012 | LOCKING PIN FOR DIFFERENTIAL PIN |
001 | A 13 635 302 74 | - |
| 013 | DRIVE PINION WITH RING GEAR RATIO 1:3.7 |
001 | A 12 135 000 39 | - |
| DRIVE PINION WITH RING GEAR RATIO 1:4.10 FOR TIRES 6.40-15 |
001 | A 18 035 002 39 | - | |
| 014 | LOCKING PLATE FOR RING GEAR AT DIFFERENTIAL GEAR HOUSING |
008 | A 12 099 400 10 | - |
| 015 | HEX. -HD. SCREW FOR RING GEAR AT DIFFERENTIAL GEAR HOUSING |
008 | A 18 399 001 01 | - |
| 016 | TAPERED ROLLER BEARING | 002 | A 00 098 114 05 | - |
| 017 | THREADED RING FOR REAR AXLE HOUSING FLANGE FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 308 25 | - |
| 018 | THREADED RING FOR REAR AXLE HOUSING FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 306 25 | - |
| 019 | LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 301 73 | - |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 302 73 | - | |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 303 73 | - | |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 305 73 | - | |
| LOCK OPTIONAL FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 035 306 73 | - | |
| 020 | LOCKING PLATE FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
001 | A 18 099 400 30 | - |
| HEX. -HD. SCREW M 6X12 DIN 933-8 G FOR DIFFERENTIAL GEAR AT REAR AXLE HOUSING |
002 | - | ||
| 022 | LOCKING PLATE THREADED RING, REAR AXLE TUBE, LEFT |
001 | A 18 099 401 10 | - |
| 023 | LOCKING SCREW THREADED RING, REAR AXLE TUBE, LEFT |
001 | A 18 099 002 15 | - |
| CYLINDER ROLLER BEARING Sustituido por: A 000 981 16 01 |
- | A 00 098 104 25 | - | |
| 024 | CYLINDER ROLLER BEARING | 001 | A 00 098 116 01 | - |
| 025 | SPACER SLEEVE | 001 | A 18 035 300 40 | - |
| 026 | PRESSURE RING | 001 | A 18 035 301 48 | - |
| ANGULAR CONTACT BEARING Sustituido por: A 000 981 04 27 |
- | A 00 098 107 27 | - | |
| 027 | ANGULAR CONTACT BEARING | 001 | A 00 098 104 27 | - |
| 028 | SHOULDER RING | 001 | A 18 035 300 63 | - |
| 029 | COVER FOR REAR AXLE HOUSING, FRONT |
001 | A 18 035 303 08 | - |
| 030 | SEALING RING FOR REAR AXLE HOUSING, FRONT |
001 | A 00 099 713 46 | - |
| JOINT FLANGE, BOLTHOLE CIRCLE DIA. 80-MM FOR DRIVE PINION UP TO REAR AXLE 6501925 |
001 | A 12 035 002 45 | - | |
| 031 | JOINT FLANGE, BOLTHOLE CIRCLE DIA. 90-MM FOR DRIVE PINION FROM REAR AXLE 6501926 |
001 | A 18 035 001 45 | - |
| 032 | GROOVED NUT FOR DRIVE PINION |
001 | A 12 035 000 66 | - |
| 033 | LOCK FOR DRIVE PINION |
001 | A 12 099 400 44 | - |
| 034 | SNAP RING, REAR | 001 | A 12 099 402 35 | - |
| 035 | SNAP RING, FRONT 80 DIN 9045 |
001 | - | |
| 036 | ADJUSTING SCREW FOR PRESSURE RING |
002 | A 18 335 101 70 | - |
| LOCKING PLATE 15 DIN 93 FOR ADJUSTING SCREW |
002 | - | ||
| 038 | HEX. NUT FOR ADJUSTING SCREW |
002 | A 18 099 001 50 | - |
| 039 | SHIM 1.00 MM THICK OPTIONAL |
001 | A 12 035 324 52 | - |
| SHIM 1.00 MM THICK OPTIONAL |
001 | A 12 035 326 52 | - | |
| SHIM 1.20 MM THICK OPTIONAL |
001 | A 12 035 328 52 | - | |
| SHIM 1.30 MM THICK OPTIONAL |
001 | A 12 035 330 52 | - | |
| SHIM 1.40 MM THICK OPTIONAL |
001 | A 12 035 332 52 | - | |
| SHIM 1.50 MM THICK OPTIONAL |
001 | A 12 035 334 52 | - | |
| SHIM 1.60 MM THICK OPTIONAL |
001 | A 12 035 336 52 | - | |
| SHIM 1.70 MM THICK OPTIONAL |
001 | A 12 035 338 52 | - | |
| SHIM 1.80 MM THICK OPTIONAL |
001 | A 12 035 340 52 | - | |
| SHIM 1.90 MM THICK OPTIONAL |
001 | A 12 035 342 52 | - | |
| SHIM 2.00 MM THICK OPTIONAL |
001 | A 12 035 344 52 | - | |
| SHIM 2.05 MM THICK OPTIONAL |
001 | A 12 035 345 52 | - | |
| LOCK WASHER B 7 DIN 127 FOR COVER, SEALING RING, FRONT AT REAR AXLE HOUSING |
006 | - | ||
| HEX. -HD. SCREW M 7X20 DIN 931-10 K FOR COVER, SEALING RING, FRONT AT REAR AXLE HOUSING |
006 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy